Hourglass screen?

All of a sudden my screen became sort of weird. It does'nt meet the corners and it's sort of like a waist size. I've tried everything, the adjustment knobs on the front of my monitor and laptop settings, my monitor will come out or I have a virus? PCs have a picture tube, as did TV and could mine out?

All of a sudden my screen became sort of weird. It does'nt meet the corners and it's sort of like a waist size. I've tried everything, the adjustment knobs on the front of my monitor and laptop settings, my monitor will come out or I have a virus? PCs have a picture tube, as did TV and could mine out?

Yes, your screen is probably a failure. Time for a new.

-steve

~ Microsoft MVP Windows Live ~ Windows Live OneCare | Live Mesh | MS Security Essentials Forums moderator ~.

Tags: Windows

Similar Questions

  • Firefox has crashed on the desktop. Get only the black screen, taskbar with icons and hourglass cursor of the mouse on the taskbar. Windows 10.

    I tried to restart Firefox, nothing helps. Then I tried to restart my desktop computer Dim screen with taskbar with icons, hourglass cursor that does nothing on tasckbar only. I tried to close everything down and restart - without success. I write from my laptop, the problem is on my desk - Hewlett-Packard, 2-3 years, running windows 10. Only one prior occasion when Firefox crashed. Restart of Firefox took care of the problem and has been fine since.

    Contact a computer repair. It seems that the system files are corrupted.

  • Sometimes then stops working and has an hourglass on the screen for a few minutes, how do I speed it up?

    Some sites... The hourglass flashes on my screen and load custom pages.
    It won't let me even scroll to the bottom of the page.
    Finally, I get the message...
    "A script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends. »

    Is there something I can do?

    Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

    You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

    Then perform the following steps:

    • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
    • In the Firefox options window, click the Advanced tab, and then select 'General '.
    • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
    • Now restart Firefox and see if the problems persist.

    In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

    This solve your problems? Please report to us!

    Thank you.

  • When I click on a message "Sent", all the letters on the screen fades to opaque, an hourglass appears and nothing happens.

    When I open the window for all my "sent" messages and click on a specific message, nothning happens. Instead, inclusion on the list of "sent" messages fades an opaque and an iconn hourglass appears. When this happens, I can't close yet Thunderbird is reactivated. Sometimes if I wait until a minute or two, the message is displayed. I usually Ctrl/alt/delete and start all over again. This has only started happening in the last few weeks. During this same period, another problem appeared. I use google and Youtube to watch a lot of old TV shows. Now, Yahoo research appears, and results include things a lot, as I don't want to see. FYI, I use E-mail a lot, reception and sending messages up to a dozen a day.

    What is the folder "sent"?

    The "Sent" folder can get a lot of emails over time.

    Suggest that to remove anything you don't need. Archive of what anyone older than a month.

    implement 'Archive Options' to archive by month and keep the folder structure.

    then select/highlight all the emails older than a month, they will appear as conversations in the messages pane. Click the "Archive".

    These e-mails will continue to be available in the archive file, but it will reduce the file size of the "Sent" folder

    If you have deleted e-mails from the "sent" folder, right-click on the folder and select "compact".

  • my computer screen is suddenly in the form of an hourglass. How can I fix it?

    The middle of the screen is strapped in, as if with a BellMC.  The type is small in the middle.  How can I fix it?

    Hi, Sandyapt,

    Adjust the screen resolution

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

    If Nvidea graphics card follow the directions listed here.

    http://www.nvidia.com/object/IO_13955.html

    Start > right click on computer

    Select manage

    Select Device Manager

    Click on the + sign next to the display adapters

    Right-click on the driver and select uninstall

    Close the Device Manager

    Restart the computer for the changes to take effect

    Go to the computer or the video card manufacturer's website and search for updated driver

    If intel, use this utility

    http://Downloadcenter.Intel.com/

  • Outlook express screen will come but still white with the hourglass in the middle and rest as if frozen.

    my outlook express appears but I have a blank page with the hourglass stays in the center of the page above it outlook express State does not

    Hello
    Work through the steps in this article:
    An Outlook Express basic repair kit:
    http://www.Microsoft.com/Windows/IE/community/columns/oerepair.mspx

    Hope this helps,
    Don

  • HP 40GS stuck on the hourglass for the calculation of certain integrals

    So I used my calculator HP40GS for awhile, and I've never had problems with it.

    Recently, when reviewing for the examination of calculation AP, I noticed that the calculator could not do some integrals. Because I already went through the lesson using the graphing calculator calculators and integrals without problem using my computer, I don't think that there is nothing special about this one.

    One of the integrals in question is 3 * e ^(-x/2) * sin (2 x) on the interval [0,2].

    I tried to make the home screen capture (in the mode of operation):

    ∫ (0,2,ABS (3rd ^(-x/2) * sin (2 x)), x)

    The calculator has been blocked at least five minutes on the same screen with the little hourglass until I pressed on 'on' to force her to leave.

    Also, I tried to do this in CASE mode, using the manual view. This also does not work.

    Other calculators in the classroom (TI-83) did the integral almost immediately.

    My memory is not yet close to being complete.

    Is there something I could do or check to solve the problem? Other integrals seem to be more or less fine.

    Thank you!

    When you do digital integrals, some of them may take some time. On the 40gs and many other units of HP, the accuracy of the correction is what distinguishes the accuracy of assessment. Try to set the precision of DIFFICULTY 4 in the homescreen of modes and re-evaluate. I suspect that he will return very quickly. That should mean "exact to 4 decimal places.

    You can also try to do exactly in the CASE and then to assess the result. In many cases, it may be faster.

  • flashing screen unable to do anything else apart from CTRL + ALT + DELETE 8.1 windows

    This morning, Toshiba Satellite C55 - starts ok. signs to ok. but the next screen blinks and the hourglass is NOT (circle thing) swirling around. Stops flashing for about 15 seconds and start again. The only thing I can do is CTRL ALT DEL any help or ideas would be welcome.

    In response to my post from 08:13 today. Have tried various ways one seen on the web many points. It is a common problem caused by many things according to what I read on the web. So I took my laptop to PC World and they told me that the flashing is caused by Norton. Basically, a clash of downloads from Microsoft that was huge yesterday evening and Norton do not receive the patch of security right in place beforehand. I know the result when I pick up my laptop. If I was more computer savvy I couldn't do it myself. I was wondering if this has happened to anyone else?

  • IdeaPad Yoga 13: start, stop, and touch screen problems

    Hi - I recently bought a Yoga 13 IdeaPad, and although I love the PC, I'm started having tons of problems with it. The computer now usually is blocked on startup and stop: choice of the option (from settings) closed generally won't hurt, and if to do this, it takes forever. Sometimes the power button stays on for 15 minutes after I turned off the computer, and the PC will not be restarted in this State. Yoga often does not start, just freezing on the start screen "Lenovo" flagged "Hourglass" of spinning. It took me several times and when it finally starts, the touchscreen is unresponsive for a while: I have to use the keyboard to drag it to the lock screen and log in. And while the PC has repeatedly sent in "automatic repair" after failing to start, repairs the problem.

    Someone at - it ideas? I'm at the edge of the fair return of Yoga, but I also love it and would love to keep it if these issues can be ironed out.

    Thank you!

    Alan

    There is a solution for the problem of update. It involves access in the application of msconfig and disable services left 3rd reactivation post update. Worked very well for me and many others. Search the forum for more details.

  • Black screen after reboot XP

    On my husbands computer all it can get after that restart is a black screen with the cursor showing, after it does appear the welcome with the blue bar of windows mobile screen.  The computer was working fine all day, he was doing research and everything froze, his slider when placed above the start button would show only an hourglass so that he could not restart normally must manually turn off the computer. After reboot, all he got was a black screen with the cursor showing, nothing else.  I tried to boot in safe mode and chose several options, but whenever he could bring up a black screen showing 'safe mode' in each of the corners of the screen and a set of numbers followed SP3 upstairs at the center of the screen, nothing else.   I couldn't do a system restore or anything whatever, and I suspect that the problem came from the last automatic update.  I see most of the questions on this help dealing with Vista, has anyone using XP Home figured out how to fix it yet.  It's almost 4:00 and I worked on this for the last 4 hours!

    Hello

    Start in safe mode.
    Uninstall SP 3:
    http://support.Microsoft.com/kb/950249

    And perform the repair facility.

    http://www.WindowsReinstall.com/WinXPHome/sp2sp3installxpcdrepair/indexfullpage.htm

    All the best!

  • My screen is sideways. How can I make up?

    The screen was blank except fo an hourglass.  I double clicked and the screen came back to the side, it rotates 90 degrees.  I would like to restore normal vertical position.

    Rotation of the image of the screen is a feature of the graphics card and is normally caused by accidentally pressing a combination of keys.

    To remedy this, hold down the CTRL and Alt and press among the four arrows (up, down, left, or right) until you have the correct way upward.

  • Frozen on blue screen after asking to activate

    I just did a reinstall on Windows XP Professional, after that a virus wiped out my file on the Dell laptop structure.  Used a CD that was floating around my company because the OS came preinstalled on my laptop and the original disk is no longer with the computer.  Reinstall seemed ends without a hitch.  Request product key for activation.  Has taken the original product key from the bottom of the computer and it came.  Windows installs on a black allowing the screen with the words "Please wait...". "I waited for several hours without activity.  Reluctantly determined that it should be a hard reboot scroll down.  After that the Windows starts normally throughout the connection then it's loading settings personal personal settings / application, then a message saying: "this copy of Windows must be activated with Microsoft before you can log in.  You want to activate Windows now? "With the buttons Yes and no.  I click Yes.  The process is progressing towards a blue screen and an arrow with an hourglass, and then... nothing.  For hours if I let him.

    I know that I did wrong most likely restart activation hard while the process has been hung up.  I called technical support and keep getting transferred between Activation and technical support.  A fuzzy connection and the language barrier has led me to abandon the process after having been repeatedly asked what is the number of activation once I added the product key that I have not written down and can no longer access.  How do I advance beyond this point to fix the activation?

    Hello

    You can read the following article and check if it helps:

    Blank page to activate Windows in the wizard of Windows Product Activation

    http://support.Microsoft.com/kb/314935

    Also check out the link:

    How to activate Windows XP

    http://support.Microsoft.com/kb/307890

    Hope this information is useful.

  • I don't have the desktop, no start menu item icons and taskbar shows hourglass after you start. Can't do anything except in safe mode. Help!

    I have a dell Inspiron with windows xp. When I started the computer this morning, I pass the windows startup screen and then just get an empty office and no start menu icons. The taskbar are also disabled in me showing only an hourglass.

    I restarted the computer in safe mode and run malwarebytes which found 1 infected file which I deleted it. Unfortunately this has not solved the problem.
    For any help or suggestion would be welcome. I cannot function in atm safe mode but obviously limited in what I can do.

    Thank you for your reply Syed. Since I posted the request, I took my machine an outlet Center supported local PC and he was diagnosed with a faulty hard drive. So, I now have a new hard drive prescription (and a couple of days of work re - install everything to hope).

  • I have a ploblem to start the line at the bottom of the screen.

    Yesterday, then I turn me off my pc on the screen appeared several tables and I clicked on "end now".  Today when I turned on pc I cannot use the low starting line, then I move the mouse on that border watch this little Eve sand (hourglass). What should I do to fix this?

    The task bar are missing when you log on to Windows
    http://support.Microsoft.com/kb/318027 Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • Have a Windows update and my screens are all screwed up now, Please HELP!

    I am running Vista Home Basic and day before yesterday when I rebooted my computer, a Windows update itself installed. He said he was installing 1 of 1 files. I knew the idea of what the update was for, but when I brought my system to the top of the screen and all open windows, including web screens are all strange and almost hourglass like? I tried to restore my system to three times, tried to adjust resolutions and even settings on my old monitor and nothing works. It also seems that all icons and things are a little bit bigger and I don't see anything on the left and the right of my screen. Can someone help me? The only thing that seems normal is the password screen that appears when I turn on my computer before I get to my home page? Any ideas?

    Hi PVneedshelp,

    Welcome!

    I suggest that you try to system restore to the point before you install the update by using the Windows vista installation disc.
    To use the Windows recovery environment, you must have the Windows Vista or Windows 7 installation disc. To start the Windows recovery environment, follow these steps:
    1 put the installation disc in the disc drive, and then start the computer.
    2. press a key when you are prompted.
    Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
    3. Select a language, a time , and monetaryand a method of keyboard or input and then click Next.
    4. click on repair your computer 
    5. in the dialog box System Recovery Options, click the operating system you want to repair, and then click Next
    In the System Recovery Options dialog box, click System Restore to restore the operating system to the restore point created when the program or the driver has been installed.
     
    Check out the link for more information below.

    http://Windows.Microsoft.com/en-us/Windows7/restore-your-computer-from-a-system-image-backup

    If the previous step fails, then I suggest that you uninstall the display adapter driver that is present on the computer and then install the latest driver for graphic map of the manufacturer's Web site and check if it works very well.

    You must be logged on as administrator to perform these steps.
    How to uninstall a computer device driver.
    1. open the Manager of devices by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. in Device Manager, look for the device you want to Update, and then double-click the nameof the device .
    3. click on the tab driver , then click Uninstall and follow the instructions.
    Once the uninstall is complete, restart the computer and then install the driver to view CAD that you downloaded from the website of computer manufacturer.

    Also suggest to run Windows updates and make sure that you install the availability.

    1. open Windows Update by clicking the Start button, all programsand then click Windows Update.
    2. in the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.
    3. If updates are found, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Portege R830 - need to value added for Win8 64 bit package

    Hello I have a Portege R830-1 and I am very disappointed with Toshiba. I have the function keys working on the first month of windows 8. whenever a windows update broke that for me and after that the kys function no longer works. I reformatted the pc

  • Laptop is a Pavilion dv6-3025dx, Photo smart media opens but displays all the photos.

    When I open Windows media center all the photos that are installed on the computer are still there. They do not come and view the HP media smart program. When I go into a space that is to have a picture but it is empty, I can press on "ctrl and enter

  • Windows 8 Switchable Graphics

    Hello. I have a HP Pavilion dv6-6134tx Entertainment Notebook PC. Recenly I upgraded my windows 7 to windows 8. And installation of windows 8 says that after installation the installation of windows 8 is finished, you will need to reinstall the video

  • write the file

    Hello, I am trying to write to a file here is a clip FILE * f = fopen("' / shared/documents/save.txt ', 'w'"); if (f is NOTHING) { fprintf (stderr, "failed to create output.txt...\n"); _exit(2) (1) ; } fprintf (f, 'Hello World'); Close (f) ; The erro

  • BlackBerry smartphones can my blackberry 8800 with OS4.2 supported more than a calendar?

    I'm looking for a solution to be able to check my google calendar since the blackberry without intefrering with institutional calendar. My blackberry calendar syncs with my calendar on my desktop PC, which in turn syncs up with a group calendar - acr