I have a ploblem to start the line at the bottom of the screen.

Similar Questions

• I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

  Original title: someone help please?

  Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

  So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?

  Hello

  1. have you made changes on the computer before this problem?
  2 - what you want to say that you receive this error message during the installation of Windows XP?

  Check to see if the following is useful.

  Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

  Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

• 4 keyboard key opens the calculator, 3 button opens Notepad, - key starts the screen saver.

  You have problems with programs: when I hit the 4 key, my calculator will appear.  I checked hotkey in properties, and he says nothing.  When I assigned another shortcut to the calculator, the 4 button was always popping up the calculator.  The 3 button opens notepad and 0 or - starts the screen saver. 7 pop open my cd-rom drive.  5. I can't use at all (I'll have to use the keyboard to the right of my keyboard to type this message again.

  • Recent changes made to your computer: drivers installed MinoHD.  A refurbished device that my virus scan caught and removed the 2 virus when I first plugged it.  In addition, have updated Mozilla firefox a couple of times on consecutive days - I thought randomly.
  • What you have already tried to solve the problem: Virus scans a couple from different sources.

  I can't type the dollar sign (Maj 4) at all.  Although I hold SHIFT, it always opens the calculator when I press 4.  Someone has an idea?

  It's a laptop Lifebook Fujitsu Series N.  After I posted this, I heard somewhere that it could be a combo of my function key or my windows key.  I started playing with these buttons, including hitting the number lock / scroll lock key.  None of this seems to work, but then 5 minutes later, I tried to work on something else and I hit key 4 by habit and it worked normally.

  I do not know what undid the problem, but it was something in the sense of what you're saying.

• Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family

  Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.

  These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.

  Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu

  

  > options > advanced > General.

• When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

  When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

  The solution is here:

  http://support.Microsoft.com/kb/321305?WA=wsignin1.0

• garbage scrambled display horizontal lines obliterate all or most of Firefox (IE sometimes) to display, also start the screen icons

  Steps to follow:
  While browsing in Firefox (most often), IE (a little) Chrome (rarely/never)
  Result:
  Start intermittently once commissioning is found on almost every screen.
  Horizontal black lines obliterate sections/parts of the browser, or together.
  Lines to come and go as you scroll up and down the screen.
  Resize fullscreen actually disappear, then it returns often.
  Expected results:
  Displays text fields as you wish.
  Notes: Atypical in the browser Chrome, occurs less often in IE browser. Most frequently encountered in Firefox.
  Failure of the workaround:
  Submit a new application or change the video driver.
  No effect. Problem returns.

  Steps to follow:
  Even scrambled corrupted icons on the start screen of Windows, erasing some or all the details icon, but not the bottom area.
  Results:
  Again, scroll back he made come and go.
  Just maybe 1 time per week on the start screen, everyday in browsers.

  Hi Chris,

  1. What is the Biostar mother board model number?

  2. What are the specifications of onboard graphics card?

  3. have you updated the BIOS and drivers from the chipset?

  Check if the Biostar mother board model is compatible with Windows 8 by clicking on the link.

  Since you mentioned the problem on different versions of Windows 8. Either the card mother or graphics card is perhaps not compatible with Windows 8, or you must update the BIOS and drivers from the chipset. Contact the motherboard manufacturer support to improve the assistance on the update of the BIOS.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem persists, you will need to update your graphics card. For more information, see supported by motherboard Biostar.

  http://www.Biostar-USA.com/techmain.asp

  Hope this helps

• Unable to connect to my profile at the start, the SCREENS ' SAYS the PROFILE SERVICE does NOT have the USER logon

  "Unable to connect to my profile when starting, SCREENS SAYS'THE PROFILE SERVICE does NOT have the USER logon"

  Profile of user could not be added

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• I have to stop and start the database after the data cache value increases?

  Hello!

  rule of Calc is in error and indicating that the error can be caused by data cache setting small size?

  I increased the value, but it still gives the same error message. I can't stop and start the database, just clicked on apply.

  I need also to check the journal rule and computation of the application to determine the cause of the error.

  But the key is in the question in the header...

  Kind regards

  user637777

  
  

  Yes, you do.

• At the beginning; After the Windows Logo at the start, the screen goes black and a POWER SAVE MODE comes up. I must stop button. I can run the computer as I am now in Mode safe mode with networking.

  When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds.  Then the screen goes black instead of blue and stays black for about 10 seconds.  A 'Power SAVE MODE' appears.  The machine is dead to all orders.  I have to stop by pressing the off button.  I can turn back and the F10 key to get in Mode safe mode with networking.

  I tried to reinstall Windows XP original but it would erase my files.  I tried to restore the last good configuration also knowledge.  That did not work.

  The change came after a Windsows update.  I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start.  Clues?  I use Negear.  No change when I hooked directly either.

  Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do.  What does not load Windows?

  http://wiki.answers.com/Q/How_to_get_out_of_power_save_mode_when_computer_screen_is_black

• Satellite L300 - I do not have 32-bit colors on the screen

  Hi all

  I just bought a new laptop Toshiba Satellite L300 and after Vista initial installation it doesn t show the colors of the screen properly. I set up the resolution, but also the 32-bit color, but on the screen, it shows just something like 256 colors.

  Everyone he knew similar, any idea where I should look like or change something to have own 32-bit colors.

  Thanks Zeljko

  Hello

  To be honest, it's really strange.
  What you could do is to repeat the HARD drive recovery.

  Turn on the laptop, press the F8 key and choose fix my computer.
  Then choose Toshiba Recovery and you start the resettlement process.

  The laptop must be set to the factory settings, and you can check if the display problem would persist.

  Good bye

• I have a dell inspiron 1525, the screen goes black every few minutes. I have to close the lid and open it to make the screen come back. any ideas?

  Screen goes black every few minutes. have to close and open cover return the screen.

  Hello

  1. on what application is the problem occur?
  2. the hard drive spin when your screen goes black?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  I suggest that you update your display drivers and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 2:

  Test the issue in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step 3:
   
  If your computer works fine in safe mode, then there must be a third party software that is causing the problem to occur, this is why I suggest you put your computer in a clean boot state.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Note: Put your computer in normal mode (step 7).

• Windows cannot start the screen saver

  I get this message instead of a screen saver... no matter which, I chose. If I go to preview, all he says is that there is "no preview available".

  It started this week. I install nothing new at the time it started, at least one week before, and I think it was actually longer than a week.
  I am running Windows Vista Home Premium SP2

  Thank you! Home at last got to this do and method 1 worked. I could have lived without the screen saver, but I prefer it. Happy to have it work again.

• MacBook Pro does not start, the screen is pixelated.

  MacBook Pro (2011) running iOS later.

  Screen went blue, at which time mac was turned off.  Try to be able to save and mac does not start.

  Tried to boot using utilities, but can not access this screen.  (the screen is also all the "pixelated".)

  Looking for ideas before making a trip to the Apple store.

  1 disconnect all devices (Ethernet, USB, external hard drives, mouse)

  2. start in safe mode

  3. go Finder - press Option-Go - ~/Library/ /DiagnosticReports ofnewspapers

  4. find the missing table inception report and post it please

  If your Mac will not turn on - Apple Support

• Re: Satellite A135-S2276 - does not start, the screen is blank

  I have a Toshiba Satellite A135-S2276, I bought 2 years ago. It worked fine except the clock which has never kept the exact time since I bought it. I turned it off Sunday night as I do regularly. But he could not turn it on Monday afternoon. The power light is not on when you turn it on, but primer. The light remains on but does nothing. The screen is blank when feeding it works.

  Can someone help me with the answer? Thank you

  Dennis

  It's hard to say what is happening to your knees. You can access Bios? Try to connect the external monitor and see (maybe the screen of the laptop disappeared)...

• my computer laptop presario won't start, the screen is black and a shrill alarm sounds when I turn it on

  My laptop is a Presario F700 l PC, Vista operating system.

  We live in Italy and service broadband and wireless local apartment acquired last week.  We also bought and installed a Canon printer.  This computer was used in Italy before.  It was purchased in 2008 and also used in Manila and Yokohama.  I just had 'set to top' and checked before leaving the United States in September.

  I do not have the complete operating manual and I know what a yellow light on the front does mean something but I have no idea what.  The computer has been acting 'strange' for about a week in which he wont 'stay' at the top of a list of e-mail, the Office does not 'click', and it activates a different screen of the selected.

  IM technologically dim and this computer is my only link with "House" and my source of planning in Italy-travel. "  Im trying not to panic.  Thanks for your suggestions.

  Thank you very much for this - it's reassuring to know the resource and quick response is there.  I had already tried a solution I found online fixed 1/2 of my questions, but feel sure that these steps will finish my dose.  Thank you very much.