how cool is a power Mac? I a. The 1 2010 prosser we.

Similar Questions

• How to use LR on Mac, and at the same time on a PC

  I'm new to Mac. I used LR on PC and I used a disc external hard storage my catalog and photos of work. Now I have the problem that LR on Mac says a catalog cannot be used on an external drive. So, how can we work on Mac and on my Windows laptop?

  DdeGannes wrote:

  You need to detach the disk from the computer and attach it to the Mac.

  Probably will not work because the drive of the PC is formatted in NTFS (windows) and Mac natively needs a HFS.  The Mac can READ an NTFS drive, but it cannot write to it without a special driver.  Do an internet search for "mac, write to NTFS drive" and several solution will come.

• How to assign an address mac manually via the SDK

  Hi all

  I want to add a NETWORK card to an instance of a computer virtual via the API vSphere for Perl with a MAC address of 'me '.

  I don't want, assigned to the vCenter by the MAC automatically, which is the default value.

  I am frustrated because I have not found anything in the internet.

  Can someone help me?

  Thanks in advance,

  Henning

  You will need to call the ReconfigVM_Task specify a specification of the configuration of the addition of a new type device VirtualEthernetCard and when you add the new vNIC, you have the option of specifying how the MAC address will be generated: http://www.vmware.com/support/developer/vc-sdk/visdk400pubs/ReferenceGuide/vim.vm.device.VirtualEthernetCard.html you will need to set the addressType to manual and macAddress at the MAC address string you want to set , remember that the MAC address must be in the range of 00:50:56:00:00:00 - 00:50:56:3F:FF:FF

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• How can I get my XDP form in the SharePoint 2010 Adobe Form library?

  I was able to get samples of Adobe LiveCycle for SharePoint working.  For some reason, I can't get my forms XDP appears in the drop-down selection list in the library of Adobe on SharePoint forms via the connector of Adobe LiveCycle SharePoint for SharePoint 2010.

  Is there something that you need to make available to the form.  The only difference I noticed was that the sample forms used a guide.

  We use Adobe LiveCycle Designer ES3 and we have Adobe LiveCycle ES4 server.  We are using SharePoint 2010.

  Any help would be appreciated.

  Thank you

  Joe

  I had this problem is solved.

  Solution:

  Create Adobe Livecyle form

  Have a xsd created for the schema of what is happening in the form

  Import this data model when you create the form

  Right-click on the connection of xsd data in the form.  Click connection properties.

  Click Next.

  Click on the checkbox "Embed XML schema" (this is what I was missing).

  Click Finish.

  It's to make the shape appear in SharePoint Adobe forms library.

• How to use APINavigator so that it allows the VS 2010 browse the C++ API of InDesign?

  I installed APINavigator and it worked very well for all the SDK samples in VS 2010.

  Recently I started to write my own plugin file (whose path is stored is different from that of the SDK samples).

  Navigator API is still able to identify and syntax highlight file .fr, but my VS 2010 is not able to navigate through Indesign C++ API.

  (For this reason, I get only the auto complete options while using native Indesign and functions Classes)

  What I have to change/configure some path somewhere to make it work?

  Hello kapoor_aman27,

  You must add the .rsp file content to the list of addional include dirctories and not the .rsp himself. The IDE ignores the .rsp file.

  Markus

• Where can I get a Power Mac Quicksilver monitor connector?

  I withdrew my Power Mac G4 (Quicksilver?) in 2010 in favour or an IMac 27 ".  Now after having sitting in storage for years, I plug it into my IMac as an external hard drive to wipe and move.  I did not set the monitor and cable connection for some reason any.  Any ideas where I can get a cable RGB for this G4?  I can't find one online.

  Thank you.

  Gina

  Unfortunately say 27 "iMac don't tell me much about the model and its capabilities unless I have spend five minutes of research on iMac models.  Ideally, all you need to do is to put the computer in target disk Mode and attach it to a compatible computer, this way to get access to the drive, no monitor required.

  How to use FireWire disk mode target - http://support.apple.com/kb/HT1661 - includes a description of the hardware and software configurations.

  Most of the other ways I know attaching require the Quicksilver be started on the drive in which case it won't let you erase the drive.

  Another way is to remove the drive completely then buy one of these things in setting $30 naked reader with connector IDA / ATA and use it as an external drive.  I have a NewerTechnology universal drive adapter that performs the 3.5 "and 2.5" SATA and SATA drives.

• 8 cores Logicboard for Power Mac G5 A1117? Possible?

  Hey there,

  I use my Macbook for a long time now, but I have to switch to the Mac Pro for audio recordings. My neighbor would generously give its late 2005 A1117 G5 with a logic board faulty bicoeur.

  Is it possible to replace it with a newer version, for example the A1186 - eight core?

  Not really. They have different layout.

  The back of a Power Mac G5 (left) and a Mac Pro (right) show the differences in the arrangement. Note the double on the Power Mac fans and the single fan on the Mac Pro as well as the new arrangement of I/O port.

  

  above:

  https://en.Wikipedia.org/wiki/Mac_Pro

• [Power Mac G5] Type of liquid cooling system?

  Y at - it anyway how to determine type of LCS just by looking at the case?

  We have old school Power Mac G5 DP 2, 7GHz (early 2005) we use for editing (well, for the last two years, he's right there and no one wants to touch this old piece of...). They will throw him in the year, and since I was take care of him for a while, I thought I'd take home when they do and use it as a backup machine for the data of my and my wife. I would like the max memory, put a few large hard drives (and small SSD, but there seems to be a lot of problems with this) and run the Linux command (more problems).

  But first, I have to clean the machine and look at the State of it. What particularly concerns me is the LCS (DP 2, 7GHz I) - these things have been prone to leaks and what I found there are at least three revisions of the LCS - second of them made by Panasonic seems to be the most reliable. I can't look inside, deeply, because it must be ready to use at least for another 3-4 months, I can do is to open the case and remove the front fan and look outside the heater.

  So this brings me to my question: Y at - it anyway to determine the type of LCS just by looking at the case?

  Thank you...

  Apparently, there were two models more prone to leaks than others, although still very rare. See this http://www.everymac.com/systems/apple/powermac_g5/faq/powermac-g5-liquid-cooling-infos-fuites-issues.html

  The damage inflicted by a system of flight are very serious, and it is almost impossible to hide or completely clean. As soon as you open the side panel on the Power Mac, you will easily be able to tell if this unit experianced a problem.

• Power Mac G5 power problems...

  Hello, on a quest to find a G5 computer, I found an early 2005 Power Mac G5 (2x2.7GHz). The first time I plugged it in and turned on, it works beautifully. The second time, I pressed the power button and heard a loud noise from the power supply. I replaced and this is what is happening now:

  When I plug the power cable in, there is a small clicking noise about a second after plugging in, and the power led on the front of the machine flashes for the click. However, it does not at all depend on when I press the power button. When I unplug the cable, it makes the same noise about a second after I unplug the unit. I see a pale glow of the light output after unplugging it.

  Anyone have any suggestions to solve this problem? It is part of a collection, that's why I want to do operational.

  There may be defective capacitors or other power supply problems, including

  overheating in the dust inside the power supply or air channels. And

  If the device is cooled by liquid, other things may be involved.

  Since all the PowerMac G5 power supplies are considered to be custom,.

  to get a good replacement is a way hoped to improve the situation.

  Unlikely as is, actually an inexpensive job.

  Have you tried a SMC power management unit reset? Or reset PRAM?

  • How to reset the SMU on a Power Mac G5 (late 2004) or Power Mac G5 (late 2005) - Apple is supported

  To reset NVRAM (PRAM) see:

  • How to reset the NVRAM on your Mac - Apple Support

  Several links appear in the result of this research; some look promising:

  https://DuckDuckGo.com/?q=Troubleshooting + G5 + PowerMac + power + supplies& t = ffsb & AI = web

  I read about the noise, the PowerMac G5 can do when some power components

  fails; Troubleshooting is involved. Somewhere I had a link to a source for official PDF
  REPAIR, download for offline use. -I do not see if I can locate the item...

  Apple Power Mac G5 (early 2005) manual .pdf

  Apple Power Mac G5 (late 2005) manual .pdf

  Apple Power Mac manual G5.pdf

  Good luck!

• How can I connect mini mac (MGEN2ZP/2) for samsung monitor Samsung (S19B300 of Samsung SyncMaster)

  I bought a mac mini, this model is MGEN2ZP/A (this is the intermediate model of this tech spec . http://www.Apple.com/shop/buy-Mac/Mac-mini).

  I have old Samsung LED S19B300 screen (the link tech spec: http://www.samsung.com/sg/consumer/it/monitor/led-monitor/LS19B300BS/XS).

  But when I try to connect the adapter mini displayport or HDMI to VGA in older cable, then connect it to the samsung monitor port, I have mini power mac, I can hear the sound, but the screen display black color. More info on the old cable vga cable.

  Please show me how to connect properly?

  You probably have a bad adopting.

  I'd get a miniDP known and in good > DVI adapter since you monitor

  http://www.Samsung.com/SG/consumer/it/monitor/led-monitor/LS19B300BS/xs

  has VGA and DVI time entries

  I bought the new connector mini displayport > adopters VGA which did not work.

  For HDMI > VGA you need a HDMI is digital while VGA Converter is similar.

  http://www.Newegg.com/product/product.aspx?item=N82E16812699001 & nm_mc = EMC-IGNEFL 070414 & cm_mmc = EMC-IGNEFL070414-_-EMC-070...

  Many of them as above require an energy source such as a USB connection

• How do you configure L7780 Mac wireless digital archiving?

  I have a L7780 wireless all-in-one. It has an IP of 192.168.1.2 (example)

  I have a Mac laptop under Leopard, whose IP (example) 192.168.1.3

  No matter how I try, I can't get the L7780 do a digital archiving with the Mac... I actually got it to work once, but then for some reason any it stopped working, and I can't do anything to make it work again... He comes up with the error "password and PIN are incorrect", OR even when I'm just trying to scan to the computer in the Menu scan, it does not recognize my Mac and says that I should implement my connections... I tried turning power on and off the computer / printer...

  I want a digital archive in a folder named DOCS, in a folder named SCAN in documents of my username...

  That's how I got it Setup before, when I went to 192.168.1.2 to edit digital archiving for the L7780 and it worked for a while...

  \\192.168.1.3\username\Documents\SCAN\DOCS

  I guess the password is the password I use to connect to my computer associated with my user name

  & PIN? I don't know what it is, I might have put in place once, but don't remember what it was

  Is someone can you PLEASE tell me how to set up? with typing exact IE

  Have you tried these instructions?

  Best regards / Jim B

• Satellite A60-122: cooling systems and Power Saver bugs

  There are two methods of cooling for my laptop: "Max Performance" and "battery optimized". Well, I read what the manual says these plans, but my comments are a little different. I discovered that under the regime of 'Battery optimized' only the main fan works (the one with the processor), while according to the 'Max performance' secondary fan speed works.

  The problem is in the passage between the plans: once the 'Max performance' is turned on, and then the computer is switched back to "Battery optimized", the secondary fan will never stop. It is very worrying, because the secondary fan is noisy. Any ideas how to solve this problem?

  I have the latest version of the BIOS (1.90) so that the last program energy savings.

  Hello

  Sorry, but I don t think you're hardware engineer, designer hardware or software maybe developer to define certain behaviors such as bug. Or I'm wrong about this? ;)

  How old is your A60? Have you ever cleaned the unit and remove the dust? The device can be cooled properly? Please clean it properly and unit will be able to catch his breath. That means that the cooling fans work slowly and certainly not so often. After cleaning my old Satellite P20 (three vents) laptop was much quieter.

  Energy saver is created for the optimization of the battery, and allow the user to define how the phone should work with the battery or the power supply current. This optimization means low energy consumption and longer work with battery power supply.

  > The problem is in the passage between the plans: once
  > "Max performance" is turned on and then the computer
  > is switched back to "Battery optimized", the
  > secondary fan will never stop. It is very disturbing,
  > since the secondary fan is noisy. All ideas
  > How do I fix this?

  It's a very interesting question and I have tested on my laptop and it works well. I spent several times between the profiles and the result is always the same: fun runs on max performance but every time when I switch to the optimized battery cooling fan stops immediately. Try it please create own profile with a minimum level of activity of the CPU and cooling method. Connect it to the power supply and with FN + F2 switch between profiles.

  In the end, if there is a bug I think that these last two years (unit must be about two and a half years) it should be fixed long ago.

• Reinstalling Adobe Creative Suite 2 on power Mac G4

  How can I reinstall my Adobe Creative Suite 2 on my power Mac G4?  I get the error message that my previous serial number is not valid.  I upgraded from Photoshop 5.5.

  I thought about it.

  Thank you

• How to unlock my book mac pro with my watch i

  How to unlock my book mac pro with my watch i

  The watch must be update shows OS 3, and MacBook to macOS Sierra.  Then go on the MacBook in settings-> Security & privacy-> and select "Allow Apple Watch unlock your mac".

• How can I check my Mac mini for spyware and other viruses

  How can I check my Mac mini for software spyware and other forms of virus? Recently, I received an electronic invoice which seems to come from Apple on a purchase that I did not. Unfortunately, I answered by clicking on a link that asked me to cancel or manage this purchase that led me to a site that didn't look like an official Apple site. I am afraid that simply by doing so, I welcomed the spyware on my Mac mini hard drive.

  My Mac was purchased in 2011 and runs on OS X El Capitan (version 10.11.6).

  Kind regards

  Politkovskaya

  Receive a fraudulent e-mail for a purchase confirmation, you did not is a very common scam. Remember that you are not misled by providing personal information solicited by this e-mail.

  Unfortunately, I answered by clicking on a link that asked me to cancel or manage this purchase that led me to a site that didn't look like an official Apple site. I am afraid that simply by doing so, I welcomed the spyware on my Mac mini hard drive.

  No harm will come of the fact that you wrote. Fraudulent Web sites that are made to appear as legitimate those who are specially designed to convince you to reveal personal information. If you don't have that, no further action is necessary or justified. Do not install anything, no matter the source or the apparent popularity, in response to one such scam. To do this would be the first step in a path well worn to the misery.

  On the other hand, if you were tricked into providing personal information (like your Apple ID and password) you will need to change your password on Apple ID. Please write back for instructions.