How to configure an AcroForm for signature on iPad

Similar Questions

• How to configure outlook express for hotmail = Icannot sending spare part.

  I had to have a laptop but have a problem with it. Hope someone can help.

  I can send emails via hotmail, no problem. But when I try to send attachments the recipient receives an error message saying: could not read.

  When I tried to configure hotmail/outlook, asked me for some program codes | don't have no or understand.

  I'm a newbie to computer jargon. Please help if you can - many thanks.

  Hi Malcolm,

  1. What is the file format of the attachments that you send?

  2. What is the exact error message when you try to configure Outlook Express with your Hotmail account?

  3. are you having the same problem with other accounts?

  4 program are. which codes you referring?

  To open the attachments, the recipient must have the software file installed in the computer. Without the software, recipient may not be able to open the files.

  To set up Outlook Express, I suggest you go through the following articles of the KB.

  How to configure Outlook Express to use a Hotmail account

  http://support.Microsoft.com/kb/220852

  How to configure Outlook Express 6.0 for Internet mail

  http://support.Microsoft.com/kb/171163

  If the problem is only with Hotmail, then I suggest you to ask your question in the Forums of Hotmail.

  http://answers.Microsoft.com/en-us/windowslive/Forum/Hotmail

• How to return a document for signature?

  I have a document that has been lost by the person supposed to sign.  How send it back to them to sign?

  Hello Andrewk15076826,

  If the document is still out for signature, you can create a reminder that will send a new email for the same document to the signatory. You can go to the tab manage-> document simple click under out for signature and the right click, Remind tab.

  Kind regards

  -Usman

• How multi select documents out for signature and remove them?

  During the test a form, I sent many forms for signature. Now they clutter the page manage. Is there a way multi SELECT and delete them without doing them one by one?

  Hello Balusha,

  From now on, we do not have bulk option remove documents on the tab manage in E-Sign. But, I probably took this as a feedback.

  Kind regards

  -Usman

• How to configure vSwitch distributed for EQL MPIO?

  I read the guide of Dell for the vswitch for EQL configuration. However, it is assumed that DVswitch is not used. Does anyone have guide how do for distributed vswitch?

  What version of ESX?   MEM 1.1.x can create the configuration and it supports the VDS.

  Refer to TR1074 MEM 1.1. install the report tech for more information.

  In addition, TR1075 the configuration of vSphere guide has instructions on Configuration vDS.  So I'm not sure which document you were using.

  What 10GbE and 1GbE?    If you have distinct physical maps, I would still use a standard vSwitch on vDS.   Not really convinced that there is an advantage.

• How to configure my PC for the first and after

  Hello:

  I have some problems with the Adobe software (especially with the first, after and Photoshop), when working with HD images (1920 x 1080 p, any format and with images of high resolution PH); the software will really slow sometimes when I use effects, such as the effects of correction of color or movement backward, or several cameras on first; the programs sometimes hang, or the empty screen to lose what I was doing...

  Here is the configuration of my PC:

  -Motherboard: Asus P9X79 PRO

  -Processor: Intel Core i7 - 4820 K 3.7 Ghz

  -Graphics card: GigaByte GeForce GTX 770 OC 4 GB GDDR5

  -RAM: G.Skill Trident X DDR3 2400 32GB PC3 - 19200 CL10 (32GB) 4x8Go

  -OS: Windows 7 Ultimate

  -Main hard disk: SSD SanDisk 256 GB SATA3

  I think with this PC, things must be faster, I tried to configure the RAM settings to give the software the max that I can, I've updated everything and I know that if I had an another SSD just for images, it would be better, but I've worked in other PC with a similar setup and they where faster... What should I do? How to check that everything is well configured?

  Thank you very much!

  PC hardware is not bad... as it goes.

  What you really need, is the other drives... usually a disk configuration 4-5 place the OS/programs on the C drive and many others, the following "bits": project files; cache/database files; preview files; media files.

  This would be a system 5 units, each option on a separate disk. And there are combos for running with 2, 3 or 4 drives total.

  The other option was an array of RAID - 0 4-6 disc scratched with your system drive.

  However ... Bill Gehrke, The expert on these things, reports rather incredible success using m.2 readers than a Samsung external T1, the latter able to run through a port USB3 (not nearly as high speed with external drives need more) and very usable read/write time with everything the program file being on the Samsung Q1 cross.

  Here is a link to Newegg to the referenced reader...

  http://www.Newegg.com/product/product.aspx?item=9SIA3FA2MW5954&utm_medium=BehEmail&cm_mmc= EMCPB-012016-_-PB-_-Bluecore-_-Content&utm_campaign=Post_Browsed&obem=kG0pQ4ZnarpJlim7Preg r_zepa4_BlGBGIm7flZoG3k % 3D & utm_source = Bluecore

  Now, at $184 / USD, it's a bit spendy gig for the "disk space", BUT... it is big enough for most small to moderate users to have a few projects on at any given time. You just need to move things on and outside it as needed. But you compare the total cost of connection that versus purchase say disks 5 3/4-to & so that they know, it's significantly less expensive. And you can use external references USB3 large and cheaper for backend storage of work not in progress.

  So... maybe that would 'fix' your questions...

  Neil

• How to configure the proxy for firefox androidversion?

  How to set parameter for android version of firefox?

  Thank you

  Hello

  I have had a look and found this page that should help you.

  If this is not the case please come back here and we'll see what we can do to help.

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• How to configure the adapter for network WRT54G wireless

  I downloaded the driver for a tenda usb adapter.  What else should I do to connect to the network WRT54G? I am currently connected via an ethernet cable. Running Windows/7.

  TIA,

  Phil

  OK, I found out how locate network and connect. The only problem was that I used the password instead of the key WEP.

• How to configure the VPN for Xperia phones

  I know that this does not work for many after the upgrade to KitKat but I just wanted to know how other users were using previously.

  Could you give me the settings or help me how to use these settings.

  VPN does not of course for a lot, but I guess that Sony will do something so he can fix it. But tell me how you used earlier. I am interested in knowing. Never used because I found it difficult. People told me that it is a sort of proxy to surf the net anonymously.

  Sachin4u wrote:

  ... VPN works of course not for many...

  Where did you get this info? I had this problem a few weeks in this forum channel and no useful response has been posted.

  But anyway: on Android 4.3, I added a VPN connection with the 'IPSec Xauth PSK' type and the pre-shared key. At the opening of the connection, I entered username and password. A few secconds later than the VPN connection to my home network with router Fritz Box has been implemented.

  Hopefully, I could help you, Titus

• How to configure user accounts for different users of the PC?

  I have various users for laptop. Need to have the 3 people you connect with password. How do you define this on a laptop?

  See this link on how to create and manage user accounts: http://windows.microsoft.com/en-US/windows-vista/Create-a-user-account. Expand the second link (my computer is on a workgroup) for your likely information. Don't worry if have to jump the "User and family security accounts" link in step 1.

  Ask us if you need additional assistance.

  Rifdhan

  If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.

• How to configure on Mac for HP Office jet 4620

  I just download drivers HP for Mac OS X 10.9.3. How to set up so I can scan to my MacBook Pro?

  Hello LaNita1950and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are in the process of scanning.  I would like to help.

  If you have not yet installed the software, I would say that first.

  If you have, I'd recommend using this document on how Scan: OS X v10.9.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• How to configure the network for Windows XP boot

  I have a laptop from nec.
  the cd player does not work and usb either.
  It has an ethernet jack, but I don't know how to set up at the start of the network
  Please help thanks

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• How to configure a firewall for a SX20 recorded on a highway to VCS

  Hi all

  As you can see from the picture, I have a classic situation. Everything works fine.

  

  Customer must now use a cisco SX20 in a branch.

  The firewall Cisco ASA 5540 is currently configured as follows:

  1. static (inside, outside) 213.42.140.136 (public IP) 10209252166 (internal ip address)
  2. access-list extended permitted ip 87.241.12.76 OUTSIDE_access_in (VCS Expressway IP) host 213.42.140.136

  I did several tests:

  • SX20 H.323 configuration Pentecost Nat On, Off and Auto

  In all cases, the system is correctly recorded, but the call signaling does not occur.

  • If instead of using my own system with a public IP address, it works very well.

  Can someone help me how to properly configure the firewall?

  Thanks in advance

  Control to the asa that threre are no correction / inspection enabeld to sip, h323, and skinny.

  You will find that a doc cordially voip and ASA here:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008081042c.shtml

• How to configure the switch for JMS bridge

  Hello
  
  I tried with the selector option when working with several bridges, here is the scenario that I applied.
  
  Created five queues ( Q1, Q2, Q3, Q4, and Q5 ) and configured JMS bridge Destinations with each queue with the factory of unique connections ( CF1, CF2, CF3, CF4, and CF5 ) and baptized as D1, D2, D3, D4 and D5.
  Then created JMS JB2 bridges with D1 source and destination as D2. Similarly the JB3 as D1-D3, as D1-D4 JB4 and JB5 as D1-D5.
  And sector for each of the JB2 JB3 and JB4 JB5 as two, three, four and five respectively and reboot after the changes.
  
  Now I expect the following scenario to work
  By pushing the message to Q1/CF1 with two in the content of the message, so wait for the message to be delivered to Q2/CF2 through JB2, but messages is not moved by JB2.
  Similarly, message pushed to Q1/CF1 having three in the content of the message, so waiting for the message to be delivered to Q3/CF3 by JB3, but messages is not moved through JB3. Similar behavior for other messages with four and five in the content of the message.
  
  In the bridge configuration, selected QOS as "Atmost" - once.
  
  Note: all configurations were conducted in the same field and the WL version is 10.3.6.0 *
  
  The example message I am pushing to Q1/CF1 say 'two Test Data'* and expect to reach the queue Q2/CF2
  
  Concerning
  Venkata Madhu
  
  Published by: vv * Sep 12, 2012 13:05

  JMS selectors work normally om jms headers and not on the message.

  In my previous post, I see that WebLogic provides an extension "SELECTOR xpath" in this area, although I recommend using standard selectors when possible. See my previous post for more information on the syntax of the selector, etc.. The best resource on selectors is the javadoc for javax.jms.Message (http://docs.oracle.com/javaee/5/api/javax/jms/Message.html).