How to configure the network for Windows XP boot

Similar Questions

• How to view traffic on the network for window icon 7?

  In XP, whenever there is network traffic, the network icon flashes, but it does not Flash in Windows 7.

  I would like to know how do network icon flashes on window 7.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  This is a small app that will do it for you.  It does not need to be installed, just 'run' or 'open' the file and you will see the icon.

  I keep in my folder of OneDrive public to share with others.  You can get it here:

  Indicator of status bar of the network for Windows 7, 8 and 8.1

• How to install the theme for Windows XP Professional

  How to install the theme for Windows XP Professional?

  Hi Shubham,

  The Microsoft Download Center a lot of themes, or you can use your favorite search engine to search the Web for more themes of third-party websites.

  Note:   software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can consult the following articles:

  Make Windows XP as you wish

  Resources to configure desktop themes in Windows XP

  Create your own desktop theme

• How to configure the network adapter when you run ESXi on VmWare workstation?

  How to configure the network card installing ESXi on VmWare workstation 6.0.0?

  These are the options: I tried bridged, host-only NAP.  None of them works

  

  What Miss me? driver or adapater?

  I'm running on vmware workstation on Windows 7 with Lenovo laptop.

  in the configuration of your virtual machine, the main issue is memory. you gave the 2 GB of RAM, whereas ESXi 6 cannot go forward without minimum 4 GB of RAM.

  If please have 4 GB of RAM and re-run Setup. you will get through.

  message about the network card should also not appear after that. What kind of network you choose depends on your need.

• How to configure the network device agent

  I added a network device (router) in the new platform, its not to go for all of the alerts in tool Hyperic. How to configure the network device to get information to the Hyperic server. Do we need to do any configuration of SNMP.
  
  Can someone help me please.

  Hi Cyndhya,

  Do you mean you want to see traps SNMP generated by your device network at HQ? To do this, you need to configure one of the agent HQ to receive traps and configure the network device to send the trap to the agent. Once this operation is complete, you should be able to add the device network platform (you must use the agent HQ for the monitoring network device connection).

  Here is the step by step guide:
  http://support.Hyperic.com/display/DOCSHQ30/agent+SNMP+trap+receiver

  Koffi

• Windows vista Home premium recovery question - how to get the source for windows vista home edition premium as the recovery does not work since the recovery partition

  How to get the source to windows vista Home premium recovery is not from the recovery partition and gives me an error message

  Hello

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How to configure the adapter for network WRT54G wireless

  I downloaded the driver for a tenda usb adapter.  What else should I do to connect to the network WRT54G? I am currently connected via an ethernet cable. Running Windows/7.

  TIA,

  Phil

  OK, I found out how locate network and connect. The only problem was that I used the password instead of the key WEP.

• How to configure the network between the host (Windows 8) and Guest (Linux)

  Hello

  I am trying to configure network between the host (Windows 8) and Guest (Linux). Guest on VMware Workstation 8.

  Using this network, I want to configure putty so that I can access comments linux to a PuTTY that is installed on the host (Windows 8).

  Thank you.

  Abdul

  To obtain external access to comments (access the guest from the host), you must configure the IP static within the guest (Linux) as below and restart the network (service network restart)

  eth0 is a dynamic IP (DHCP) to get wireless internet access

  eth1 is a static IP address

  

  

• Configuring the network for windows7 and computers portable XP with printer connected to the router

  Computer laptop windows 7 works with the printer lexmark that is connected to the router, but the laptop XP who worked with the printer can't find using the "add a Printer Wizard. Two portable computers connect to the internet O K

  Printers configured in this mode are better develop a fixed TCP/IP address.  Your printer manual should tell you how to do this.  In general, there is a 'Settings' menu on the printer where it can be defined.  The IP address should usually have the first three digits than other devices on the subnet (for home networks it would be something like 192.168.1.x) and the final number should be unique and apart from the DHCP numbers range that your router would normally assign (see the manual of your router).

  HTH,
  JW

• How to configure the network home wiFi with dlink router

  I need to create a home network using the dlink WiFi router
  a computer with Vista and the second with XP
  can someone tell me what havo to do to configure the router etc etc o give me same informamation on where I can learn to do
  I want just the old pc with xp for the server and the vista one customer but more importantly I need the file on XP to migrate under vista.
  Thank you very muche for your end of the patient cooperation
  in return, I give free cooking classes
  see you soon

  I'm not sure if you are asking how to set up a secure wireless network, if you ask how to share files between your two computers (and there is no "customer" or "server" in a working group, in a field - which is not), or both.

  So I will give you information on doing both.

  Router - configure manually

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.
  2. attach a class (usually supplied with the router) ethernet cable cat5e port Internet/WAN from the router to the ethernet port on the cable modem.
  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.
  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.

  Networking

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  XP - configure Windows to login automatically (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  Vista - Start ORB > Search > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.
  MS - MVP - Elephant Boy computers - don't panic!

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• Re: How to install the LAN for Windows XP on Portege R500 driver?

  The Toshiba drivers download site I got the LAN driver 9.6.31.0 for Windows XP on Toshiba Portege R500. Most of the downloads contain a setup.exe for installation, but it does not work. The Installation Instructions on the same site do not include instructions on it.

  How can I install this driver?

  Hello

  You are a beginner or an experienced user of PC?

• I need to know how to find the download for windows XP Service Pack 3 to put on my computer

  I have a dell laptop inspiron 1000 with windows xp service pack 2 installed and I can't find a download for windows xp service pack 3 other than the iso image on microsoft.com, I have in the past found service pack 3, my laptop, will not let me use windows update can anyone please let me know how I can fix this so I can update my computer by windowsupdate or another method Thank you.

  Patrick,

  Please see the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-download-SP3/a71b55ee-10d4-410C-8b0b-a2114f7d8b94 >>

  UTC/GMT is 20:30 on Sunday, August 19, 2012

• How to get the key for windows 7 already installed and supplied with the laptop.

  I bought Lenovo laptop, 2 years back, and he had windows 7 Home premium.  Now it is showing my windows cannot be real and asks for the key for verification. Key was written on a label on the back of my laptop. The key is now unreadable on the sticker. I'm looking for the key to verification?

  If the product key on the COA sticker is damaged, then your options include:

  Reinstall Windows 7 using the supplied with your laptop Lenovo recovery partition:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-4HWSE3

  Computers laptops Lenovo include a function called the Lenovo OneKey Recovery button, which is used to boot into the recovery environment and to reinstall Windows.

  If this does not work, contact technical support http://www-307.ibm.com/pc/support/site.wss/homeLenovo.do and request replacement CD-ROM

  If these options are not available, you will need to purchase a new product key for Windows 7 Home Premium.

  You can also try to do a restore of the system before you start, facing this problem to see if suits him.

• How to configure the switch for JMS bridge

  Hello
  
  I tried with the selector option when working with several bridges, here is the scenario that I applied.
  
  Created five queues ( Q1, Q2, Q3, Q4, and Q5 ) and configured JMS bridge Destinations with each queue with the factory of unique connections ( CF1, CF2, CF3, CF4, and CF5 ) and baptized as D1, D2, D3, D4 and D5.
  Then created JMS JB2 bridges with D1 source and destination as D2. Similarly the JB3 as D1-D3, as D1-D4 JB4 and JB5 as D1-D5.
  And sector for each of the JB2 JB3 and JB4 JB5 as two, three, four and five respectively and reboot after the changes.
  
  Now I expect the following scenario to work
  By pushing the message to Q1/CF1 with two in the content of the message, so wait for the message to be delivered to Q2/CF2 through JB2, but messages is not moved by JB2.
  Similarly, message pushed to Q1/CF1 having three in the content of the message, so waiting for the message to be delivered to Q3/CF3 by JB3, but messages is not moved through JB3. Similar behavior for other messages with four and five in the content of the message.
  
  In the bridge configuration, selected QOS as "Atmost" - once.
  
  Note: all configurations were conducted in the same field and the WL version is 10.3.6.0 *
  
  The example message I am pushing to Q1/CF1 say 'two Test Data'* and expect to reach the queue Q2/CF2
  
  Concerning
  Venkata Madhu
  
  Published by: vv * Sep 12, 2012 13:05

  JMS selectors work normally om jms headers and not on the message.

  In my previous post, I see that WebLogic provides an extension "SELECTOR xpath" in this area, although I recommend using standard selectors when possible. See my previous post for more information on the syntax of the selector, etc.. The best resource on selectors is the javadoc for javax.jms.Message (http://docs.oracle.com/javaee/5/api/javax/jms/Message.html).