How to configure the switch for JMS bridge

Similar Questions

• How to configure the VLAN for Cisco SG500 - switch 28

  Hello

  First of all, it's my first post here, I hope that someone can help me and please be patient because I am very little known.

  OK, so let me explain to you the scénarion I face and I hope someone can help me.

  We have a Cisco SG500 - 28 port gigabit switch in our workplace.

  Our goal is to create 3 VLANs and separate networks between the various departments.

  Vlan1 (which is the default VLAN in the switch)-will be used for the COMPUTER service and management.

  VLAN100 - will be used for business.

  VLAN200 - will be used for clients who need to connect to internet via WiFi.

  I created VLAN100 and VLAN200, and VLAN1 is there by default.

  I want to use port 13 for VLAN200 and to connect the-Wifi access point there.

  The uplink is in port 25.

  I would be happy if you could explain things first to a more general, abstract level, and then we can look at the specific scenario that we have.

  SG500 Cisco - 28 Gets a Sophos UTM 9 router internet.

  I need to take care of the inter - VLAN routing so, subnet and DHCP

  Thanks in advance,

  Sincere greetings,

  D

  Hi Desmond, looking at this DHCP pool it looks correct.

  For the second part, you waant VLAN 200 only work on VLAN 200, that's fine. So if you have an access point, and everything on the VLAN 200 connects to the access point, you can make an access to this list. The access list is entered only, which means the inbound interface.

  So if you have a gateway connecting to #1 port. You'll need to build the access list and apply it to port number 1. That's assuming you make a list of access 'decline' subnet source IP of VLAN 200 destined for the other subnet, that you do not want access.

  The image on another post to fill out your reference numbers, then for the ACL link, it should be placed on the interface VLAN 200 first comes to the switch (IE, the port the access point connects, make sure that you choose to bind by port instead of per VLAN)

  -Tom
  Please mark replied messages useful
  http://blogs.Cisco.com/smallbusiness/

• How to configure the adapter for network WRT54G wireless

  I downloaded the driver for a tenda usb adapter.  What else should I do to connect to the network WRT54G? I am currently connected via an ethernet cable. Running Windows/7.

  TIA,

  Phil

  OK, I found out how locate network and connect. The only problem was that I used the password instead of the key WEP.

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• How to configure the proxy for firefox androidversion?

  How to set parameter for android version of firefox?

  Thank you

  Hello

  I have had a look and found this page that should help you.

  If this is not the case please come back here and we'll see what we can do to help.

• How to configure the VPN for Xperia phones

  I know that this does not work for many after the upgrade to KitKat but I just wanted to know how other users were using previously.

  Could you give me the settings or help me how to use these settings.

  VPN does not of course for a lot, but I guess that Sony will do something so he can fix it. But tell me how you used earlier. I am interested in knowing. Never used because I found it difficult. People told me that it is a sort of proxy to surf the net anonymously.

  Sachin4u wrote:

  ... VPN works of course not for many...

  Where did you get this info? I had this problem a few weeks in this forum channel and no useful response has been posted.

  But anyway: on Android 4.3, I added a VPN connection with the 'IPSec Xauth PSK' type and the pre-shared key. At the opening of the connection, I entered username and password. A few secconds later than the VPN connection to my home network with router Fritz Box has been implemented.

  Hopefully, I could help you, Titus

• How to configure the network for Windows XP boot

  I have a laptop from nec.
  the cd player does not work and usb either.
  It has an ethernet jack, but I don't know how to set up at the start of the network
  Please help thanks

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• How to configure the DDC for testing?

  Hi all

  I would like to implement Cisco Secure Desktop in our WebVPN configuration, but I need a way to set up and test without making our existing of WebVPN users.

  It seems to me that if I create a Windows with a criterion that * only * my machine test matches, all other users will fail. If I activate the features "when the location corresponding fails", current users won't see a difference.

  Is this correct? Furthermore, with this configuration, VPN tent making out the CSD software when users connect?

  All advice is appreciated.

  Thank you

  -Steve

  Yes, existing users will not see a difference "when the corresponding location fails. This option "what corresponding location fails" helps Windows customers use VPN to surf the web as a minimum connection option, if the client computer does not match any of the criteria of the configured locations.

• How to configure the application for child object View?

  I have a hGrid standard layout. Two display objects are present, sign in using the link display. I need to define where clause in the child View object. The changes themselves do not appear when I put the where the clause. Also when I try to extract rowCount returns 0 for child View object. But I'm able to get the parent View object value. Any suggestions please.

  Hi Shrikant,

  Thanks for your replies. I was able to find a solution. Was able to achieve thanks to the functionality of the rowset.

  Kind regards
  Pradeep

• How to configure the settings for both tables?

  SELECT GM. GRNNO, GM. GRNDATE, SUM (GS. APPROVED), SM. ISSUENO, SM. ISSUEDATE, GS. ITEMCODE, SUM (SS. ISSUEDQTY)
  OF GS, SM IMS_ISSUEM, GM IMS_GRNM, SS IMS_ISSUES IMS_GRNS
  WHERE GM. GRNMSERIAL = GS. GRNSSERIAL
  AND SM. ISSUEMSERIAL = SS. ISSUESSERIAL
  AND GM. POSTED = 'T'
  AND SM. POSTED = 'T'
  AND GS. ITEMCODE = SS. ITEMCODE
  AND GS. ITEMCODE ='01-01-02-019'
  AND *.
  GM GROUP. GRNNO, SM. ISSUENO, GM. GRNDATE, SM. ISSUEDATE,
  GS. ITEMCODE STOPPED BY GM. GRNDATE, SM. ISSUEDATE;
  
  Here, I have to select the data in the tables between two named parameters: P_1 and: P_2.
  the column date of IMS_GRNM is named GRNDATE.
  the column date of IMS_ISSUEM is named ISSUEDATE.
  How to set these parameters?

  I think what you need is
  Where table1. Column1 between: p1 and: p2
  and table2. Between Column2: p1 and: p2

• How to configure the site for several vpn site

  Hello

  We are in the process of upgrading the IT infrastructure n/w. Our headquarters is home to all servers. I want to establish a vpn between our head office and our 4 stores connectivity.

  Head offfice LAN - 192.168.1.0/24

  Remote Desktop

  1 LAN 1 - 10.1.1.0/24

  2 LAN 2 - 10.1.2.0/24

  3 LAN 3 - 10.1.3.0/24

  4 LAN 4-10.1.5.0/24

  I want to implement the ipsec through our internet vpn. An example of a config would be useful. Thank you

  Not very easy to find an example of a config...

  http://www.Cisco.com/en/us/Partner/Tech/tk583/TK372/technologies_configuration_example09186a0080094525.shtml

  But you have to ORC.

  Federico.

• How to configure the router Linksys DD - WRT for WVC54GCA E4200

  I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

  I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

  http://tzodns.com/support/tutorials/188

  http://tzodns.com/support/tutorials/190

  Hi Majekho,

  Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

  In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
  In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

  http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140

• How to configure the CD driver on the host for a virtual machine?

  After you create a virture machine and put the CD of driver on host, when powered on the vertual machine, may not start the drive form the CD only from NIC.

  How to configure the CD driver on the host for a virtual machine?

  Right-click on the virtual computer and go to edit settings. Click the Options tab and under the tip list, there should be Boot Options. Enter an amount of milliseconds to wait before your boot, so you can activate the CD-ROM. You can also activate the CD even if it boots to the NETWORK card option, and then reset the virtual machine. Get the focus of this virtual machine on the console session, and then press ctrl-alt-insert. Your CD-ROM will stay connected if you do not want to delay the startup process.

• How to configure the SMTP server for the osb 10.3.1

  Hi all
  
  Anyone can share information on how to configure the SMTP server for the osb 10.3.1
  and then how to send an email to OSB 10.3.1
  
  Thanks in advance!

  See this url:
  https://blogs.Oracle.com/christomkins/entry/sending_an_email_from_oracle_s

• How to install the theme for Windows XP Professional

  How to install the theme for Windows XP Professional?

  Hi Shubham,

  The Microsoft Download Center a lot of themes, or you can use your favorite search engine to search the Web for more themes of third-party websites.

  Note:   software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can consult the following articles:

  Make Windows XP as you wish

  Resources to configure desktop themes in Windows XP

  Create your own desktop theme