How to configure vSwitch distributed for EQL MPIO?

Similar Questions

• How to create vSwitch distributed using vicfg-vswitch?

  I was looking for to vSphere command-line Interface documentation to create the vswitches distributed using the CLI.

  http://www.VMware.com/support/developer/VCLI/

  But I couldn't find a way. So I would like to know, is it possible to create a dvSwitches using the CLI?

  If it is not possible through CLI, then what is the opposite?

  Unfortunately, my development environment is always downwards, otherwise I can whip up a small example.

  But when you say it is no examples around, there are actually many examples using the SDK including the vSphere SDK for Perl. If you look at the source code of the any orders vCLI, you will notice that they are all written in Perl, and it is not surprising, he uses the vSphere SDK for Perl. Yes, there may be no examples for each use unique case or operation that can be performed against a host ESX/ESXi and vCenter, which is the same for given PowerCLI, the functionality is there in the API.

  If you are new to VMware SDK/API and is interested to develop or create your own scripts, I'd take a glance at this document first - Getting Started with vSphere SDK - Update for SDK 4.1 release. Depending on your comfort level, you will choose an appropriate SDK (vSphere SDK for Perl, PowerCLI, VI Java, c#, .NET, etc.) to the script or program in. Some SDK will be easier to learn as PowerCLI, VMware has done a great job using the Powershell language to abstract much of the complexity of the vSphere API made it really simple to jump to the right, if you still need to understand what is happening and how the operations are actually called. The default value 100-200 + cmdlets cover most of the basic use cases, but once you start getting into more complicated scenarios, then you need to really understand the vSphere API to extend the functionality, including things like creating a vDS and distributed of the exchanges, etc.

  Here is a guide on getting started with vSphere SDK for Perl - Getting Started with vSphere SDK for Perl and here a collection of vSphere SDK for Perl scripts that I've written scripts repository vGhetto. Another excellent resource is the forums for developers as well as for the vSphere various API/SDK - http://communities.vmware.com/community/developer

  Bottom line is, everything that can be done via vSphere Client can be done using the API vsphere and with one of the vSphere SDK, it can still be trivial, but the functionality is there, you can simply create it if there isn't an example/sample code.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• How to configure outlook express for hotmail = Icannot sending spare part.

  I had to have a laptop but have a problem with it. Hope someone can help.

  I can send emails via hotmail, no problem. But when I try to send attachments the recipient receives an error message saying: could not read.

  When I tried to configure hotmail/outlook, asked me for some program codes | don't have no or understand.

  I'm a newbie to computer jargon. Please help if you can - many thanks.

  Hi Malcolm,

  1. What is the file format of the attachments that you send?

  2. What is the exact error message when you try to configure Outlook Express with your Hotmail account?

  3. are you having the same problem with other accounts?

  4 program are. which codes you referring?

  To open the attachments, the recipient must have the software file installed in the computer. Without the software, recipient may not be able to open the files.

  To set up Outlook Express, I suggest you go through the following articles of the KB.

  How to configure Outlook Express to use a Hotmail account

  http://support.Microsoft.com/kb/220852

  How to configure Outlook Express 6.0 for Internet mail

  http://support.Microsoft.com/kb/171163

  If the problem is only with Hotmail, then I suggest you to ask your question in the Forums of Hotmail.

  http://answers.Microsoft.com/en-us/windowslive/Forum/Hotmail

• How to configure my PC for the first and after

  Hello:

  I have some problems with the Adobe software (especially with the first, after and Photoshop), when working with HD images (1920 x 1080 p, any format and with images of high resolution PH); the software will really slow sometimes when I use effects, such as the effects of correction of color or movement backward, or several cameras on first; the programs sometimes hang, or the empty screen to lose what I was doing...

  Here is the configuration of my PC:

  -Motherboard: Asus P9X79 PRO

  -Processor: Intel Core i7 - 4820 K 3.7 Ghz

  -Graphics card: GigaByte GeForce GTX 770 OC 4 GB GDDR5

  -RAM: G.Skill Trident X DDR3 2400 32GB PC3 - 19200 CL10 (32GB) 4x8Go

  -OS: Windows 7 Ultimate

  -Main hard disk: SSD SanDisk 256 GB SATA3

  I think with this PC, things must be faster, I tried to configure the RAM settings to give the software the max that I can, I've updated everything and I know that if I had an another SSD just for images, it would be better, but I've worked in other PC with a similar setup and they where faster... What should I do? How to check that everything is well configured?

  Thank you very much!

  PC hardware is not bad... as it goes.

  What you really need, is the other drives... usually a disk configuration 4-5 place the OS/programs on the C drive and many others, the following "bits": project files; cache/database files; preview files; media files.

  This would be a system 5 units, each option on a separate disk. And there are combos for running with 2, 3 or 4 drives total.

  The other option was an array of RAID - 0 4-6 disc scratched with your system drive.

  However ... Bill Gehrke, The expert on these things, reports rather incredible success using m.2 readers than a Samsung external T1, the latter able to run through a port USB3 (not nearly as high speed with external drives need more) and very usable read/write time with everything the program file being on the Samsung Q1 cross.

  Here is a link to Newegg to the referenced reader...

  http://www.Newegg.com/product/product.aspx?item=9SIA3FA2MW5954&utm_medium=BehEmail&cm_mmc= EMCPB-012016-_-PB-_-Bluecore-_-Content&utm_campaign=Post_Browsed&obem=kG0pQ4ZnarpJlim7Preg r_zepa4_BlGBGIm7flZoG3k % 3D & utm_source = Bluecore

  Now, at $184 / USD, it's a bit spendy gig for the "disk space", BUT... it is big enough for most small to moderate users to have a few projects on at any given time. You just need to move things on and outside it as needed. But you compare the total cost of connection that versus purchase say disks 5 3/4-to & so that they know, it's significantly less expensive. And you can use external references USB3 large and cheaper for backend storage of work not in progress.

  So... maybe that would 'fix' your questions...

  Neil

• How to configure vswitch security policy using the API?

  Hello world

  Does anyone know how to set up a vswitch on ESXi Server security policy by using the management API (the idea is to do this in a script)?

  I think specifically the macchange and forgedxmit parameters which are set to true by default, and I want to change false.  Note that I also need a way to control the value from a script.

  I used to do with vmware-vim-cmd hostsvc/net/vswitch_setpolicy-securepolicy-macchange = false vSwitchn and vmware-vim-cmd hostsvc/net/vswitch_setpolicy-securepolicy-forgedxmit = false vSwitchn in the ESX 3.x service console, but I'll try (unsuccessfully so far) to find an equivalent using RCLI or Powershell (I don't want to enable ssh on my ESXi and use vim - cmd as I want to be able to do remote securely.

  Ideally, it would work while the host is in active locking mode (so I only need to authenticate on my server vCenter).

  Advice would be appreciated.

  See you soon,.

  Stéphane

  To update the security policy, you will need to watch the HostNetworkSecurityPolicy : http://www.vmware.com/support/developer/vc-sdk/visdk25pubs/ReferenceGuide/vim.host.NetworkPolicy.SecurityPolicy.html#allowPromiscuous

  You'll want to access the vSwitch you are interested using the following:

  [hostSystem->-> networkSystem configManager - >-> vSwitch networkConfig]

  Once the reference to the vSwitch, you'll want to create HostVirtualSwitchConfig spec: changes to http://www.vmware.com/support/developer/vc-sdk/visdk25pubs/ReferenceGuide/vim.host.VirtualSwitch.Config.html or policies make-> security which will contain (allowPromiscuous, forgedTransmits, macChanges) for changes that are just Boolean parameters.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• How to configure the proxy for firefox androidversion?

  How to set parameter for android version of firefox?

  Thank you

  Hello

  I have had a look and found this page that should help you.

  If this is not the case please come back here and we'll see what we can do to help.

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• How to configure the adapter for network WRT54G wireless

  I downloaded the driver for a tenda usb adapter.  What else should I do to connect to the network WRT54G? I am currently connected via an ethernet cable. Running Windows/7.

  TIA,

  Phil

  OK, I found out how locate network and connect. The only problem was that I used the password instead of the key WEP.

• How to configure the VPN for Xperia phones

  I know that this does not work for many after the upgrade to KitKat but I just wanted to know how other users were using previously.

  Could you give me the settings or help me how to use these settings.

  VPN does not of course for a lot, but I guess that Sony will do something so he can fix it. But tell me how you used earlier. I am interested in knowing. Never used because I found it difficult. People told me that it is a sort of proxy to surf the net anonymously.

  Sachin4u wrote:

  ... VPN works of course not for many...

  Where did you get this info? I had this problem a few weeks in this forum channel and no useful response has been posted.

  But anyway: on Android 4.3, I added a VPN connection with the 'IPSec Xauth PSK' type and the pre-shared key. At the opening of the connection, I entered username and password. A few secconds later than the VPN connection to my home network with router Fritz Box has been implemented.

  Hopefully, I could help you, Titus

• How to configure user accounts for different users of the PC?

  I have various users for laptop. Need to have the 3 people you connect with password. How do you define this on a laptop?

  See this link on how to create and manage user accounts: http://windows.microsoft.com/en-US/windows-vista/Create-a-user-account. Expand the second link (my computer is on a workgroup) for your likely information. Don't worry if have to jump the "User and family security accounts" link in step 1.

  Ask us if you need additional assistance.

  Rifdhan

  If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.

• How to configure on Mac for HP Office jet 4620

  I just download drivers HP for Mac OS X 10.9.3. How to set up so I can scan to my MacBook Pro?

  Hello LaNita1950and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are in the process of scanning.  I would like to help.

  If you have not yet installed the software, I would say that first.

  If you have, I'd recommend using this document on how Scan: OS X v10.9.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• How to configure the network for Windows XP boot

  I have a laptop from nec.
  the cd player does not work and usb either.
  It has an ethernet jack, but I don't know how to set up at the start of the network
  Please help thanks

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• How to configure a firewall for a SX20 recorded on a highway to VCS

  Hi all

  As you can see from the picture, I have a classic situation. Everything works fine.

  

  Customer must now use a cisco SX20 in a branch.

  The firewall Cisco ASA 5540 is currently configured as follows:

  1. static (inside, outside) 213.42.140.136 (public IP) 10209252166 (internal ip address)
  2. access-list extended permitted ip 87.241.12.76 OUTSIDE_access_in (VCS Expressway IP) host 213.42.140.136

  I did several tests:

  • SX20 H.323 configuration Pentecost Nat On, Off and Auto

  In all cases, the system is correctly recorded, but the call signaling does not occur.

  • If instead of using my own system with a public IP address, it works very well.

  Can someone help me how to properly configure the firewall?

  Thanks in advance

  Control to the asa that threre are no correction / inspection enabeld to sip, h323, and skinny.

  You will find that a doc cordially voip and ASA here:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008081042c.shtml

• How to configure an AcroForm for signature on iPad

  Can anyone help me by explaining how to set up an AcroForm so that it can be signed with the finger of users on an iPad? Do I need a special type of form field?

  It depends on this PDF reader you use. For example, if you include a digital signature field, it behaves like a field of electronic signature in Expert PDF of Readdle. Adobe Reader for iOS has a feature that allows you to create a signature of drawing with you finger and apply it everywhere where you want. PDF Expert has this feature too, so there is not really anything special you have to do outside to tell your users what PDF Viewer works best with the form. Note that some bear no characteristics of the shape at all, while others have limited support, especially for JavaScript.

• How to configure the switch for JMS bridge

  Hello
  
  I tried with the selector option when working with several bridges, here is the scenario that I applied.
  
  Created five queues ( Q1, Q2, Q3, Q4, and Q5 ) and configured JMS bridge Destinations with each queue with the factory of unique connections ( CF1, CF2, CF3, CF4, and CF5 ) and baptized as D1, D2, D3, D4 and D5.
  Then created JMS JB2 bridges with D1 source and destination as D2. Similarly the JB3 as D1-D3, as D1-D4 JB4 and JB5 as D1-D5.
  And sector for each of the JB2 JB3 and JB4 JB5 as two, three, four and five respectively and reboot after the changes.
  
  Now I expect the following scenario to work
  By pushing the message to Q1/CF1 with two in the content of the message, so wait for the message to be delivered to Q2/CF2 through JB2, but messages is not moved by JB2.
  Similarly, message pushed to Q1/CF1 having three in the content of the message, so waiting for the message to be delivered to Q3/CF3 by JB3, but messages is not moved through JB3. Similar behavior for other messages with four and five in the content of the message.
  
  In the bridge configuration, selected QOS as "Atmost" - once.
  
  Note: all configurations were conducted in the same field and the WL version is 10.3.6.0 *
  
  The example message I am pushing to Q1/CF1 say 'two Test Data'* and expect to reach the queue Q2/CF2
  
  Concerning
  Venkata Madhu
  
  Published by: vv * Sep 12, 2012 13:05

  JMS selectors work normally om jms headers and not on the message.

  In my previous post, I see that WebLogic provides an extension "SELECTOR xpath" in this area, although I recommend using standard selectors when possible. See my previous post for more information on the syntax of the selector, etc.. The best resource on selectors is the javadoc for javax.jms.Message (http://docs.oracle.com/javaee/5/api/javax/jms/Message.html).