How to configure port forwarding on a dedicated server running CentOS 5.4 to use Ubuntu 9.0.4

Similar Questions

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How do I port forward on apple airport? (READ ALL)

  I have an airport express from apple connected to an asus router via wifi and I need to know how I can portforward by airport to the router because my pc is connected by ethernet to the airport. Help, please.

  The express should be none not routing at all and therefore no port forwarding.

  The only way this can work is the express installation to the wireless bridge... Apple called client mode... There is no routing.

  BUT it can also have port problems... It is really unsuitable if you operate in questions.

  In any case all the transfer is possible on the Asus.

• How to install vmware tools in a virtual machine running in the drive on an Ubuntu host?

  I have a host of Ubuntu (Ubuntu LTS 14.04.2)

  I have a virtual of Fedora (4.0.4 - 301.fc22.x86_64) and I would like to install vmware tools in the virtual machine.

  When I select the player VirtualMachine-> reinstall VMware Tools...

  I get a prompt in a box on the screen.  It is said:

  The following software are available for download:

  VMware Tools for Linux version 9.9.3

  What do you do?

  X Cancel |  Download and install

  Of course I choose to download and install (kind of silly question - why I want to cancel?)

  So instead of download the tools I want to install, it says:

  Your permission is required to install an update to VMware.

  Please enter the root password to move forward.

  Password: __________

  not serious.  Now, he's looking for what root password?  The virtual machine or the host?

  I have try the virtual machine and it works-not "incorrect password... try again."

  ... well Ubuntu is not a root user.  So, I try the password for the user with root privileges

  "incorrect password... try again."

  Then, he does not.

  Not very satisfying.

  The instructions that I found in my research right you will say to take the step to obtain the Tools package then (well, nothing of the rest of it is important if the tools are not available to me).

  Suggestions?  Advice?

  The required password is for the host.

  A workaround of functions is "sudo su -" of ubuntu host, then start vmplayer from the root prompt.  You must browse the virtual machine since the user doesn't have a history of openness yet... but then there is no prompt asking for a password when you try to download the tools.

• How can I enable port forwarding in the router of the time capsule

  Does anyone know how to enable port forwarding in router Time Capsule Airport please?

  Port Mapping on the time Capsule airport cannot be enabled unless you have the right type of modem on your network.

  Thus, we need the number of brand and model of the device you're calling your "modem" before we can move forward. Please post back this information.  We do not need a series number... only the name of the manufacturer and model number of the modem.

• Configure an FTP server behind ASA 5505, need some sort of port forwarding

  My company uses a Cisco ASA 5505 Adaptive Security Appliance, and I'm trying to set up an SFTP server which is accessible from the Internet.

  Is it possible to simply configure port forwarding to my FTP port (4610) to the IP with the server, as I would on a simple Linksys router? Or I have to put in place a sort of demilitarized zone?

  Any help would be greatly appreciated.

  No, you do not necessarily have a demilitarized zone, inside works perfectly. I guess you want to use the ip address of the external interface of the ASA for this? If so, it would looks something like this. Where x.x.x.x is the ip address of the inside/private of the ftp server.

  public static 4610 4610 netmask 255.255.255.255 x.x.x.x interface tcp (indoor, outdoor)

  outside_access_in list extended access permit tcp any interface outside eq 4610

  Access-group outside_access_in in interface outside

• How to configure server DHCP of VMware Server 2 to play nice on my network?

  I have 8 physical systems running on a network.

  A system running VMware Server 2 on it.

  Server DHCP of Server2 provides virtual machines with IPs on the 192.168.106 network and they all work fine, all virtual machines find each other and physical systems too.

  My wireless router is a DHCP server which provides boxes of physical IPs on the 192.168.2 network and works very well between physical systems.

  The problem occurs when a physical systems trying to access a virtual machine.

  All virtual machines are set to run in NAT mode, I tried no succcess one either bridged mode.

  The VMs system static IPs on the 192.168.2 network also fails miserably as all of my attempts to set masks subnet on all systems.

  I think I need to 'fix' the VMware Server 2 DHCP server, but have not yet find data on this topic, and I'm not sure that if I do this will help.

  Any solution here would be FANTASTIC.

  Past esxi was not really going to do this I feel even if you have not installed - it is really intended for high-end package rather than SATA based servers while sort will work on some.

  Their reason to exceed the NAT is filled? If you want to that virtual machines at all simply appear as regular machines on your existing subnet then packed is the easiest way to go because virtual machines must be able to obtain their IP addresses of your router, as well as physical boxes. DHCP server 2.0 is just for the NAT and host only networking that it manages-for machines virtual NAT, you must configure the port forwarding on the host server 2.0 for all the traffic you want to enter in the virtual machines from the outside since by default, all incoming ports are blocked, appropriately with NAT, see Chapter 11 of the user guide - http://www.vmware.com/pdf/vmserver2.pdf

  So, if you want to go to bridge, we need to understand why this does not work as it should be "out of the box" as long as there is no any firewall host or other security software, for example the clients VPN, which will block traffic. What is the host operating system? Please post ipconfig/all or ifconfig - an output of the host and the guest. How have you configured in bridge network - using the default settings? Virtual machines get an IP address from your router?

  Guy Leech

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Safer ' guarantee how to configure a Mac?

  What is the best way to secure/configure a Mac "without installing any additional security software' (Yes Mac it should not need to explain) using the built-in features of El Capitan. A simple step by step guide would be useful for all readers. for example. Account settings, firewall, guard the door and other measures?

  (1) let everything is configured by default

  Some other things to consider.

  Use a Standard account, but really that only protects you from yourself. If you are running as an administrator as your single account, create a new one to do the admin account, then downgrade your own standard.

  If you have a router between you and the internet, you don't need the application under OS X Firewall. The router acts as a firewall. Now if you have your router configured to pass traffic through your router to your Mac (Port Forwarding or DMZ), then turn on the firewall can be useful. You don't have a laptop, but for completeness, I should add that the firewall can be useful when you connect to a public network and you have sharing enabled services, and you do not want to go through each one and disable it while on the public network.

  When you download the software, use only the website or the App Store. I guess a developer could start the crapware grouping to make extra profit, but I think that they would be quickly identified on the internet and all their software downloads would cease.

  OK, it wasn't really "safer." For this,.

  (1) unplug the ethernet cable

  (2) turn off WiFi

• port forwarding issues

  I played with port forwarding with my two cams of linksys and other 3 g wireless network web pages on my local network I want to access from the outside world.  I have one to configure them to use other port 8081, but after a few experiments see it as useless.

  I have a router linksys WRT54GL running dd - wrt V23 SP2 firmware and ports 80,81 and 443 (all in the field "port of") transmitted to cam1, cam2 and Western Digital NAS drive respectively. I found that because I'm port forwarding in any case, the two cams can continue to use port 80 and I 80 and 81 in the ' port of "or side defined WAN port 8080 bothers me to my router gui.

  There's the rub for me, it is, I cannot use 80,81 and 443 of the side ports WAN routers forward my port, if I use a different port, I can't access anything whatsoever that is served as a web page. I discovered this when I installed the Transmission torrent client on my NAS drive, it has a web interface as well and uses the port 9091, however when I port transfer it via my router I can't web interface from outside my local network. If I change the WAN or 'port' 80 or 81 and let the 'port' to 9091 I get fine, but I need to disable the port front of webcam that uses this port.

  I was going to get a 3rd and 4th IP Cam but will have the same problem, because it seems that only I can use ports 80, 81 and 443, and they are already exhausted. (I use 443 for secure access to my NAS drive) Change the port number in settings/options to 1024 or anything else works that if I leave it on the side of port forwarding LAN, WAN-side must always be 80 or 81.

  The only way I can see around this is to create a page that will reside on my router or my drive NAS I can show more out of a camera on it - something, I want to do in any case.

  PS. I do not use TZO, but I use dyndns so my dns is myname.dyndns.org.

  Finally understood that there is a problem with blocked ports from my place of work, which is where I tried to connect from. When I connected to the internet with my laptop computer and aircard, I was able to get to ok. My solution when I want to check on the torrents of the work is to connect to my router GUI work, changing the port 80 or 81 and disable the webcam on this address.

• LRT214 Port Forwarding does not

  First of all, when you create a service in the port forwarding section, why to select the two TCP/UDP has been omitted from the selection must be embarrassing for Linksys.  Creation of 2 services, one for the other for UDP and TCP are bad design.  Would love to see that this problem has been corrected in future updates of the firmware.

  The main problem is I have configured port forwarding services, but I can't get anything to work.  I am able to access remotely to the router using the port 1443 that is configured in a separate section.  I worked in the network design and mgmt for 10 years and why Linksys decided to make the management for the LRT214 so different interface, then the rest of the market was a bad decision.  Is there anything else you can suggest to help out why these ports cannot be opened through the FW?

  On this router logs show nothing.  There is no log for blocked inbound connections and there is a class router business?

  After setting up some boxes of Windows on the local network, then transfer to a custom RDP listening port, I am able to RDP in these Windows boxes remotely.  It verifies that the Linksys router is forwarding ports correctly.  The question then is something on the Synology device itself.  Thanks for your response!

• RV042 Port forwarding stops working when the firewall is turned on

  Hey all,.

  I have an on a single WAN RV042 router and internal network. I have configured port forwarding as follows:

  HTTP[TCP/80~80]->10.0.0.6
  HTTPS[TCP/443~443]->10.0.0.6
  IMAP[TCP/143~143]->10.0.0.5
  IMAP SSL[TCP/993~993]->10.0.0.5
  SSL[TCP/587~587]->10.0.0.5 SMTP

  Everything works fine when I have the firewall turned OFF. However, when I enable the behavior is erratic. 1 of 10 attempts to connect to ANY port transmitted works. Almost all attempts at expiration time.

  Note that this happens even if you only use the default firewall rules (which must be circumvented by the port translation I've read in other posts).

  My second try was to create rules to Firewall manually, the substitution of the value default ones. I tried to add source WAN1 rules (where is my connection) to the ONE and UNIQUE IP on each port. Nothing seems to work.

  I don't know what I'm doing wrong, it's really bugging me. I had to disable the firewall if we can access our servers from outside the office. It shouldn't have to do.

  Do you know what I might try?

  Best regards

  Theo

  Hello.

  These products are processed by the Cisco Small Business Support Community.

  * If my post answered your question, please mark it as "acceptable Solution".

  Thank you!

• Most entries in table Port Forwarding on WRT54G V1, firmware 1.0.04)is

  Hello

  I recently bought the above router. However, it seems that in its interface, I am able to put only limited port forwarding entries (about 10). My current DSL modem, I used before only a router, allowed me to add number of entries I wanted to though.

  I am currently dangerously close (on a single PC, second PC is coming) to reach this limit. I know what I'm doing (i.e. all transmitted at intervals of ports are necessary, the applications do not support UPnP), and I don't want to disable the functionality of my software.

  Therefore, could you please tell me how I will be able to add more entries? It seems ridiculous to artificially limit this functionality.

  If you use the WRT as access points you can use all the remaining LAN ports on the WRT for wireline customers, i.e. you only 'drop' a port because you cannot use the internet port.

• Try to open the port or do port forwarding for update of the game client (improve the download speed)

  I recently participated in the beta FFXIV and im not to attempt to update the client. It happened for a day now and im only at 78%. I looked on the forums on the site and he told me I should do port forwarding and ill be able to download the updated much more quickly. So my question is how do I port forwarding on a router NetGear on Windows Vista.

  Hello

  Ports must be sent to the IP of the specific computer.

  A specific port can only be transferred to a computer.

  He must be facing forward in the router and also via the firewall software.

  Instructions depends on the specific router you have (the manual force) be useful and the specific firewall software that you use (using the software may contain instructions).

  This site is the champion of port forwarding, http://portforward.com/

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• port forwarding for file sharing on the internet.

  I am trying to determine what port numbers, I need to transfer to my router (in virtual server) to be able to share my NAS files over the internet with my friends? I want to use file sharing, have implemented a DDNS on the NAS with a client account to my dynamic IP address, but cannot get the numbers correct port developed to be able to configure port forwarding. Can anyone help?

  Hello

  Open sharing Ports that are used on a local area network on the Internet is a Big safety hazard.

  There are secure applications that are built for this purpose, they use their own ports and generally are safe (as on the VPN or SSH).

  A free quick simple way is shared through secure ftp server. http://FileZilla-project.org/

  An elegant way door application like this, http://download.cnet.com/WebDrive/3000-2160_4-10017919.html

  In general, http://www.practicallynetworked.com/howto/fileshare/fileshare_intro.htm

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to configure DiffServ on PC6200

  Hello

  I need to configure DiffServ on a switch of PC6248 and PC5548. Can you provide an example config coomands creating 2 classes. 1 video and 1 data and assign it at the end of the ports of the device.

  Also how to configure ports trunk with classes? It is even necessary?

  Thank you

  To use DiffServ QoS, we must first define their criteria and categories:

  1. class: create classes and define criteria of class

  2. political: create strategies, associate political classes and define policy statements

  3. service: Add a policy to an incoming interface

  Packets are classified and treatment on the basis of criteria defined. The classification criteria is defined by a

  class. The treatment is defined by the attributes of a font. Policy attributes can be defined on a per class

  each instance and it is these attributes that are applied when a match occurs. A policy can contain

  multiple classes. When the policy is active, the measures taken dependent on the class that matches the package.

  Package treatment begins by checking the class for a packet matching criteria. A policy is applied to a package

  When a class is within this policy is found.

  The Differentiated Services menu page contains

  If you had a video on VLAN 22 and wanted to assign a specific preference and assign it to port 1. Orders should look like this.

  class-map correspondence test22 ipv4

  game of vlan 22

  output

  Policy-map test23 in

  class test22

  Assign-queue 4

  output

  interface ethernet 1/g1

  service-policy in test23

  There are several different match criteria that can be used. The user and CLI guides describe the available options.

  http://www.Dell.com/support/manuals/us/en/19/product/PowerConnect-6224

  Hope this helps