How to configure ssh on the new network card

Similar Questions

• How to configure a VM with multiple network cards to see Agent?

  How to configure a VM with multiple network cards to see Agent?

  We can archive this requirement by configuring the subnet used view Agent.

  The subnet determines which view address of Network Agent provides the server instance to connect to view for the client protocol connections. The view on VM officer has more than one NIC

  Follow the procedure below:

  on a display Agent installed VM,

  * Recording of VM session.

  * RUN--> type regedit or type regedit.exe at the command prompt

  * Create a registry entry to configure the subnet.

  For example: is HKLM\Software\VMware, Inc. \VMware VDM\Node Manager\subnet = n.n.n.n/m type - REG_SZ.

  In this example, n.n.n.n is the TCP/IP subnet, and m is the number of bits in the subnet mask.

• Problems to install the new network card (WiFi) on Portege R

  Hello

  I would, following restoration problems reinstall the network card,
  I need the name of the manufacturer and in the installation manual

  can someone help me

  Best regards
  STONE

  Discover the VEN_ and DEV_ card numbers in Device Manager.
  Then google the number FRI and DEV to know what card it is.

• I just got a new supplier of cable installed at home and now we find that our usual printer print wireless. How can I add this to the new network?

  I just had a new supplier of cable installed at home and now we recognize that our habit of printing wireless printer, how can I add this to the new network?

  Hello

  • What is the brand and model of the printer?
  • What happens when you try to print?
  • You receive an error message?

  You can view these methods:

  Method 1:

  Disable the firewall and check.

  The Windows Firewall is enabled by default in this version of Windows. To make sure that it has not been disabled, follow these steps:

  1. open the Windows Firewall by clicking the Start button, then Control Panel. In the search box, type firewall and then click onWindows Firewall.

  2. in the left pane, click turn Windows Firewall on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. below for each type of network location, click on disable Windows Firewall, and then clickOK. We recommend that you turn on the firewall for all network location types.

  For more information, visit the following link:

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

• How to move Oracle APPS 12 configuration data to the new environment of production of 12 APPS

  Dear all
  
  I need to know, how we can move from Oracle APPS 12 configuration data to the new environment of production of 12 APPS? What is the safe and easy way, we do not want to make the new facility of 12 APPS and reinstalling things...
  
  see you soon

  Hello

  The scenario above is correct and should work fine. Make sure that the central source and instances of the target are the same patch upgraded.

  Kind regards
  Hussein

• Unable to create the new network former TC

  Hello

  So I have the current generation of TC acting as a router as well as a HDD on my old to wide wireless broadband. I experienced some problems with connectivity recently (where my MacAir shows that I am connected to the internet, but no matter what site I try to access everything simply does not load and ends up with a progression of Ribbon on the address bar of Safari-turn off and turn on the power back constantly solves the problem), but this is not what I am asking today. Recently, I had the new optical fiber internet for my house and got a new modem and everything has been installed. Only one of the four ports in the modem seems to work, but at least it works. The D-link router that came with it works fine, but I want to use my TC as the router instead. However, whenever I connect the TC on the working port, I am unable to connect. Airport utility, the lights of TC in green but 'Internet' is yellow, i.e. does not work correctly. It should be a problem with the TC because the D-link router works on the same port and connection ethernet via a thunderbolt on the same port adapter works perfectly fine as well.

  Is this a problem with the old settings on my TC being incompatible with the new network? Please advise, thank you very much!

  There are at least 2 different issues at stake here and possibly 3.

  A question is that whenever you change the modem or the router that connects the TC, or your provider of Internet services, the TC must be reset back to settings by default, and then set it up again to work properly with the new product and the new service.

  You don't mention how old your 'old' Time Capsule can be, but 3 years is on the average life of the time Capsule, if anything more than 3 years will be suspicious where reliable operation.

  The third possible cause is that only a single port of your modem/router works when the four should work. If this is a real problem here, we can't say, but you have to wonder a little about the reliability of a product that doesn't seem to work properly

• Cisco ACS SE "set ip" error: could not set up new NETWORK card configuration.

  Hello

  I get the error "error: could not set up new NETWORK card configuration." When I try to set the IP ACS SE.

  When I called into the device image and tried to do an initial installation, the IP to not hold after the restart and went back to the default value.

  I went by NetPro and apparently it is a common problem. One person it is solved re-imaging unit, but who has not worked for me.

  Someone there with a solid solution? I use NIC 1 FYI.

  EDD.

  Ed,

  Please make sure that if ACS is associated with active before setting Ethernet connection

  or change the IP address of your ACS system engineer.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.0/installation/guide/appliance/admap.html#wp1109621

  Kind regards

  ~ JG

• My PC (Windows 7), will automatically connect to the new networks unknown wireless is in the range. I want to stop it.

  I found a variety of positions that describe how to disable the "connect automatically" option for a specific network you connected to in the past (via 'manage wireless networks), for example:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-to-disable-auto-wireless-connect-in-Windows-7/52d33896-F356-4F9F-8390-79a686900cab
  http://checit.SCU.edu.au/index.php/FAQ/387
  They do not resolve my problem because my computer connects automatically on * new, unknown * networks that I've never connected to the front (and also, even after it connects to these networks, they do not appear in the list under 'Manage wireless networks').
  Apparently, it set to the default behavior to automatically connect to the new network he meets, and I need that to turn off. Thank you.
   

  Hi Michael,

  I suggest you to perform the steps mentioned by "Steve Winograd replied on November 6, 2009"of a similar discussion.

  Wi-wired connections on the same computer, Windows 7.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/wired-and-wireless-connections-on-the-same-Windows/ee40d9a6-297b-46D4-b5c8-db57d927b62e

  If the problem persists, I suggest to uninstall and reinstall the wireless card to reset all wireless connections.

  Hope this information helps. Response with status so that we can help you.

• How about a readme for the new signing of RVS - 4000 IPS: 1.42 in firmware 1.3.2

  Hello

  How about a readme for the new Signature IPS 1.42 inside the new firmware to version 1.3.2 RVS-4000?

  Or am I just too fast and it comes out in a bit?

  Thank you

  Bruce

  Bruce,

  You are right.  He left this time by mistake.  We will solve it.  In the meantime, here's what it will be:

  RVS4000/WRVS4400N IPS Signature Release Note

  Version: 1.42 rules Total: 1097

  In this signature, we talked about the exploits/vulnerabilities and applications
  as below:

  Supported P2P application called BitTorrent up to version 5.0.8.
  Supported P2P application named uTorrent up to version 1.7.2.

  Version: 1.41 rules Total: 1098

  In this signature, we talked about the exploits/vulnerabilities and applications
  as below:

  -EXPLOIT the MS video control ActiveX Stack Buffer Overflow
  A buffer overflow vulnerability exists in Microsoft DirectShow.
  The defect is due to the way Microsoft Video ActiveX Control parses image files.
  An attacker can convince the user target to open a malicious web page to exploit
  This vulnerability.

  -EXPLOIT the Injection SQL Oracle database Workspace Manager
  Multiple SQL injection vulnerabilities exist in Oracle database server product.
  The vulnerabilities are due to inadequate sanitation of input parameters
  in the Oracle Workspace Manager component. A remote attacker with user valid
  credentials can exploit these vulnerabilities to inject and execute SQL code
  with lift is SYS or privilegesof WMSYS.

  Supported P2P application named uTorrent up to version 1.7.2.

  Content signature for 1.41
  ========================================================================
  Added new signature:
  1053635 video MS stack buffer overflow EXPLOIT control ActiveX-1
  1053636 video MS stack buffer overflow EXPLOIT control ActiveX-2
  1053632 EXPLOIT Oracle database Workspace Manager SQL Injection-1
  1053633 EXPLOIT Oracle database Workspace Manager-2 SQL Injection
  1053634 EXPLOIT Oracle database Workspace Manager SQL Injection-3

  Updated the signature:
  1051783 P2P Gnutella Connect
  1051212-P2P Gnutella Get file
  1051785 P2P Gnutella UDP PING 2
  1051997 P2P Gnutella Bearshare with UDP file transfer
  1052039 P2P Gnutella OK
  Get Foxy P2P file 1052637

  Signature removed:
  1050521 Worm.Klez.E1 - 1
  1050522 Worm.Klez.E1 - 2
  1050523 Worm.Klez.E1 - 3
  1050524 Worm.Klez.E2 - 1
  1050525 Worm.Klez.E2 - 2
  1050526 ¡v Worm.Klez.E2 3
  1050536 Worm.Blaster.B - 1
  1050537 Worm.Blaster.B - 2
  1050538 Worm.Blaster.B - 3
  1050539 Worm.Blaster.C - 1
  1050540 Worm.Blaster.C - 2
  1050541 Worm.Blaster.C - 3

  Number of rules in each category:
  ========================================================================
  Back/DDoS 51
  Buffer overflow: 241
  Access control: 92
  Scan: 41
  Trojan horse: 62
  Misc: 3
  P2P: 40
  Instant Messaging: 121
  VRU/worm: 410
  Web attacks: 37

  Version: 1.40 rules Total: 1091

  In this signature, we talked about the exploits/vulnerabilities and applications
  as below:

  1053406 FEAT MS IE HTML Embed Tag Stack Buffer Overflow (CVE-2008-4261)
  An error of border during the processing of a too long file name extension specified
  inside a "EMBED" tag can be exploited to cause a stack-based buffer overflow.

  1053421 USE MS IE XML Handling Remote Code Execution (CVE-2008-4844)
  The vulnerability is due to a use-after-free error when composed
  HTML elements are related to the same data source. This can be exploited to
  dereference of a pointer released by a specially designed HTML document memory

  Version 1.38

  In this signature, we addressed the following exploits/vulnerabilities and
  applications:

  1. support for P2P, BitTorrent and eMule applications.

  Version 1.33

  In this signature, we addressed the following exploits/vulnerabilities and
  applications:

  1. support application IM named AIM (http://dashboard.aim.com/aim) until
  version 6.5.

  2. support application IM called MSN (http://get.live.com/messenger) until
  version 8.1.

  3 PcShare is a Trojan tool that can remotely administer an attacked computer.

  4-CVE-2007-3039: the vulnerability is due to an error of limit in the
  Microsoft Message Queuing (MSMQ) service during the treatment of MSMQ messages.
  This can be exploited to cause a buffer overflow by sending specially
  packages designed for the MSMQ service.

  Version 1.32

  In this signature, we addressed the following peer-to-peer applications:

  1. named IM application PURPOSE up to version 6.5 support.
  2. press the request of IM named MSN until version 8.1.

  Version 1.31

  In this signature, we addressed the following peer-to-peer applications:

  1 P2P application called BitTorrent up to version 5.0.8 support.

  2. support the P2P application named uTorrent up to version 1.7.2.

  Version 1.30

  In this version, we have addressed the following vulnerabilities in Microsoft
  applications:

  1 SUBMISSION-24462: dereference of a pointer Null vulnerability exists in some versions
  Microsoft Office.  Remote attackers can trick users into visiting a
  specially designed web page.  The symptom includes a denial of
  condition of service for the process in question.

  2 Microsoft Security Bulletin MS07-027: Microsoft Windows support
  Services NMSA Session Description object ActiveX control does not reach
  restrict access to dangerous methods. This vulnerability could allow
  a remote attacker to execute arbitrary code on an affected system.

  Version 1.29

  In this version, we have addressed the following exploits/vulnerabilities and
  peer-to-peer applications:

  1 Microsoft Security Advisory (935423): there is one based on the stack
  in Microsoft Windows buffer overflow. The vulnerability is due
  for insufficient format validation when handling incorrect ANI
  file cursor or icon. A remote attacker can exploit this
  vulnerability of prompting grace target user to visit a malicious
  Web site by using Internet Explorer. A successful operation would be
  allow the execution of arbitrary code with the privileges of the
  currently logged in.

  2. support a named QQ instant messaging application blocking until the
  2007 Beta1 and Beta2 version.

  Version 1.28

  In this signature, we address the following exploits/vulnerabilities:

  Microsoft Security Bulletin MS07-014: there is a buffer overflow
  vulnerability in Microsoft Word. The vulnerability is created due to
  a flaw in the Table entry of the Section within the structure of Table data flow.
  An attacker could exploit this vulnerability by tricking a user to open
  a designed Word file. Exploitation of the vulnerability may result
  injection and execution of arbitrary code in the security context
  the user target.

  Microsoft Security Bulletin MS07-016: there is an alteration of the memory
  vulnerability in Microsoft Internet Explorer. The flaw is due to a bad
  posting lines of response in the responses from the FTP server. By persuading a user
  to visit a malicious website, an attacker could run arbitrary on code
  the target system with the privileges of the currently logged in user.

  Version 1.26

  In this signature, we addressed the following exploits/vulnerabilities:

  CVE-2006-5559: there is a memory corruption vulnerability in
  the ADODB. Connection ActiveX control in Microsoft Internet Explorer.
  The flaw is due to improper validation of the data provided to the
  Execute method. By persuading target the user to visit a malicious
  Web site, an attacker can cause the application process
  to terminate or possibly divert its flow of execution to arbitrary
  code.

  Version 1.25

  In this signature, we addressed the following exploits/vulnerabilities:

  Microsoft MS06-070 security bulletin: MS Windows 2000 Workstation
  Service (WKSSVC. (DLL) has a remote code execution vulnerability. One
  unauthenticated attacker could exploit this vulnerability to run
  arbitrary code with the privileges of the level system on Windows 2000 and
  Windows XP computers.

  Version 1.24

  In this signature, we addressed the following exploits/vulnerabilities:

  1 Microsoft Data Access Components (MDAC) has a remote code execution
  vulnerability in the RDS object. DataSpace ActiveX control.  A remote attacker
  could create a specially designed and host the malicious file on a
  Web site or send it to the victim through e-mail.  When the file is opened,
  the attacker can run arbitrary code on the victim's system.

  2. control WMI Object Broker ActiveX (WmiScriptUtils.dll) in Microsoft
  Visual Studio 2005 has a vulnerability that could allow a remote
  attacker to execute arbitrary code.

  3 Microsoft Internet Explorer has a type of heap buffer overflow vulnerability.
  A remote attacker could create a malicious web page containing COM objects
  Daxctle.OCX HTML when instantiated as an ActiveX control and the thing the
  victim to open the web page. By this attack, the attacker to execute
  arbitrary code on the victim's browser.

  Version 1.23

  In this version, we have addressed the following exploits/vulnerabilities:

  The vulnerability lies in some of the engines in Microsoft XML core
  Windows. It is the result of the failure of the engine to properly manage the
  bad arguments passed to one of the methods associated with the XML
  purpose of the request.

  Version 1.22

  In this version, we discussed the exploits/vulnerabilities as follows:

  Vagaa is a P2P that supports the network BitTorrent and eDonkey software.
  It can be downloaded from the two network. The software is mainly used in people's Republic of CHINA.
  There are some problems with this software because it didn't follow the official eMule Protocol.
  The question can be referenced on the wiki (http://en.wikipedia.org/wiki/Vagaa).
  Classify us Vagaa as eDonkey2000 program and allow admin users to disable in the user Web interface.

  Version: 1.21

  In this version, we have addressed vulnerabilities exploits as below:

  Microsoft Internet Explorer WebViewFolderIcon has a buffer overflow
  Vulnerability. A remote attacker could create a malicious Web page and
  trick the victim to open. By this attack, the attacker could cause buffer
  Overflow and crash the browser of the victim.

  Version: 1.20

  In this version, we discussed the exploits/vulnerabilities and applications
  as below:

  1 foxy is a P2P application that can search and download music and movies.
  Foxy follows most public Gnutella P2P protocol but still has its own
  signature under certain conditions. After the inclusion of the file Get Foxy P2P
  rule, we can perfectly detect and block the Foxy and it will be detected as Gnutella.
  Foxy can be blocked by deactivating Gnutella.

  2 Microsoft Internet Explorer 6.0 and 6.0SP1 have impaired memory
  vulnerability in the ActiveX component.  A remote attacker can create a
  malicious Web page and trick the victim to open the web page. By this attack.
  the attacker could cause the crash of the browser of the victim or to execute arbitrary code.

  3 Microsoft Internet Explorer has heap buffer overflow vulnerabilities
  Vector Markup Language (VML).  A remote attacker can create a malicious Web site
  page and the thing the victim to open the web page. By this attack, the attacker
  could cause the buffer overflow and execute arbitrary code on the victim's browser.

  Version: 1.19

  In this version, we have added a rule to meet cross-domain redirect
  Microsoft Internet Explorer vulnerability (MS06-042). The vulnerability
  is caused by the inappropriate use of URL redirection by the object.documentElement.outer
  HTML property. A remote attacker could create a malicious web page and
  trick the victim to open the web page. With this attack, the attacker could
  run arbitrary code on the victim's browser and get sensitive information.

  Version: 1.18

  In this version, we have added the 6 rules to facilitate the blocking of QQ, the most
  popular instant Messenger in China. There are several versions of QQ on the
  official download site. Currently, we can detect and block QQ until the
  Version 2006 Sp3 beta 2.

  Version: 1.17

  In this version, we discussed the exploits/vulnerabilities below:

  1. the Server Service in Microsoft Windows 2000 SP4, XP SP1 and SP2, server
  2003 and SP1 have a buffer overflow vulnerability. A remote attacker
  could exploit a server response designed to cause the buffer overflow and run
  arbitrary code on the victim's system.

  2 hyperlink Object Library in Microsoft Windows 2000 SP4, XP SP1 and SP2,
  Server 2003 and SP1 have a code execution vulnerability. A remote control
  attacker could send a malicious Office document containing a
  specially designed hyperlink to a victim in an email or host the file on
  a web site. When the operator successfully this vulnerability, a remote control
  attacker to execute arbitrary code with the privileges of the victim.

  3 Microsoft Word XP and Word 2003 have a remote code execution vulnerability.
  A remote attacker could host a DOC file on a Web site. If successfully
  exploiting this vulnerability, remote attacker could execute arbitrary code
  with the privilege of the victim.

  Version: 1.16

  In this version, we discussed the exploits/vulnerabilities below:

  1 Microsoft Excel 2000, XP and 2003 Excel have a remote code execution
  vulnerability, due to an error in Excel when incorrect URL handling
  channels. A remote attacker could send a malicious .xls file of a victim
  in an email or host the file on a web site. When the operator successfully this
  vulnerability, a remote attacker to execute arbitrary code with the victim
  privileges.

  2 hyperlink Object Library in Microsoft Windows 2000 SP4, XP SP1 and SP2,
  Server 2003 and SP1 have a code execution vulnerability. A remote control
  attacker could send a malicious Office document containing a
  specially designed hyperlink to a victim in an email or host the file on
  a web site. When the operator successfully this vulnerability, a remote control
  attacker to execute arbitrary code with the privileges of the victim.

  3 Microsoft Windows XP/NT/2000/2003 have a denial of service vulnerability.
  A remote attacker can send a malicious SMB packet causes the victim computers
  Crash.

• can I configure an IPv4 address and IPV6 on the same NETWORK card

  I test double stack IPv4 and IPv6 on a firewall.  Can I configure IPv4 and IPv6 addresses on the same NETWORK card using a laptop installed with Windows 7, in order to test the firewall for both IPv4 and IPv6 protocols access? And if so, how to configure the NETWORK card?

  Thank you

  Jack P.

  See what...

  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings

• Configure the 2 network cards in a VM for MPLS LAN and the other for internet

  Dear all,

  I have a HP Server with 2 NIC cards. ESXI 4.0 is installed and 3 VM was created in it. Initially that a NIC card was connected to the path of the LAN MPLS switch and another card NETWORK was not connected to the internet switch port.

  Each VM only had a single NIC in it. So I assigned MPLS IP LAN to ESXI host and VM 3 and everything worked perfectly.

  Now, I wanted to have the internet connection for my 3 VM. So I plugged the 2nd NETWORK card with internet port and added the second NETWORK card to the ESXi using the Vsphere client - & gt; configuration - & gt; Networking option. Now the two nic cards are ponting to the network of the virtual computer.

  I've added 2 network card to all 3 VM and assigned to the internet IP addresses to all of these NICs. order of MPLS and internet work at the same time, I removed the card NIC MPLS entry door and manually routed through route add command. After this MPLS and internet worked well in 1 VM.

  I tried the same thing in 2nd and 3rd VM but it failed. whenever I have add 2nd network card in the virtual machine, the first of this virtual machine network adapter does not work.

  I'm after the right approach? Help, please...

  Kind regards

  Ashok doriane

  If I understand correctly your installation, you connected the physical NIC to two different IP networks.  Then you connected these cards in the same switch-v on the server.

  This essentially fills two different networks at the layer level 2 layer 3.

  You want rather than the two networks remain separated inside the host.

  • create a new v-switch on the host

  • move the internet NIC v-switch

  • Move the second NIC on each virtual machine to this switch

  • Make sure that access to internet VM NIC is one with a default gateway on a virtual machine OS

  • remove the default gateway of the NIC MPLS

  • creating persistent static routes to the NIC MPLS for any affected networks it beyond the same subnet as the NIC itself.  Addresses on the same subnet will be automatically accessible. Just roads for those outside this range.

  Steve Puluka

  JNCIA-ER enterprise routing

  Enterprise JNCIA-EX switching

  Senior network administrator

  Liberty Dialysis

  http://puluka.com/home

• How to get rid of the new menu button on the right side of the toolbar

  Honestly, I don't know why the developers cannot offer new features that we can use or not, by choice. Instead, things are forced upon us.

  Could someone tell me please how to get rid of the new menu button on the right side of the toolbar?

  It doesn't seem to be an option to remove via the Customize Toolbars window.

  Thank you very much.

  CTR extension makes Firefox customizable menu button 3 bar, so you can drag this button in the palette to customize to remove it from the Navigation toolbar.

  Reload and stop probably combine only if you set the two buttons in the correct order (reload - Stop and non-Stop - Reload)

• How to complete the implementation of process after inserting the new sim card to unlock the phone

  Try to unlock the phone more 6s with ATT, but do not know how to perform the implementation of process after inserting the new sim card. I got the unlock code confirmed att.

  After the unlock code is confirmed, you will have to restore the unit to the factory via iTunes settings.  He must inform you that the device is unlocked, THEN you change sim cards.

• How do you program to the new user account?

  I have successfully created a new user account under XP, but it doesn't have the programs in my account. How to load these into the new user account?

  Hello

  Thanks for joining us!

  You want to know "how to copy data from a corrupted to a new profile in Windows XP user profile".

  What is the edition of Windows XP, work?

  Please see this link:

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  I hope that helps!

  If the problem persists, let us know.

  If you encounter problems with Windows, please keep us informed.

  We will be happy to help you.

• HP Officejet 6700 Premium: Unable to connect to the new network HP 6700

  I just changed networks and want to connect my HP Officejet 6700 Premium to the new network.

  In the control panel of the printer, I accessed network / Wireless Installation Wizard.  When I do, I get the message:

  Locking function

  This feature has been locked by your system administrator or the person who set up the printer.

  There is an OK button, but no other options.

  I get the same message when I tried to access a WiFi Protected Setup, and, for good measure, the default system restore.

  There is no administrator, in itself, because I'm the one who has set up the printer.  I'm rulnning a MacBook Pro on OS X El Capitan.

  Please, help me to know what I need to do to connect my printer to the network so I can print.

  Thank you very much for taking the time to answer and especially for providing additional resources should what was being offered as a solution to not work.

  I have tried your solution several times and kept getting the same message.  I tried shuttig the printer off by pulling on the power cord, stop in the right way, reverse iin, etc..  Nothing removed the error.

  Then I took the printer to a local Best Buy to show them the problem, which was at home.  We tried it a few times, and then, for no reason whatsoever (seems), it allowed us to do a reset.  No one knows what was different.

  My advice for anyone with the same problem is completely unplug it, let it sit for a while, keep trying and hope for the best.