How to configure the settings for both tables?

Similar Questions

• How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?

  How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?  The Office has 5 staff members each with ending with [email protected] for example e-mail addresses.  We have also created an email for option analysis as [email protected] (not sure if creating an e-mail address for the scan option is required).  We are not part of any domain, and there is no server in the office.  When you try to configure the email on the printer/scanner control panel it asks the host name.

  What host name that I can use?

  If you try to configure the browser by using the IP address of the printer, he asks as the SMTP server. The MS Outlook 2010 all our emails use mail.junior - albania.org incoming mail server and outgoing.  Other settings in MS Outlook 2010 are box My outgoing server (SMTP) requires authentication checked and use the same settings as my mail server entering selected.  On the Advanced tab: incoming server (Pop3): 110 (SSL encryption is not checked) and outgoing (SMTP) server: 465 use the type of encrypted connection (SSL) following.

  What server SMTP should I use in this case?

  I would appreciate your help in the configuration of the HP printer/Scanner for scanning and sending by electronic mail to the members of the office staff email addresses.

  Thank you...

  I'll link you to the product page with several documents which I hope will help you to configure your e-mail settings. Please look through them and see which ones fit your needs:

  Scan and send (e-mail, send to folder, digital sending, etc..)

  Here is another site that has some videos that will guide you through the entire upward (here I would try everything first )

  Simulations of MFP - digital send

  If these don't work, please let me know and I will continue to search it for you.

• How to change the settings for the taskbar in Windows 7.

  Anyone know if its possible to change the settings for the taskbar for the other windows or games can cover or be on top of the taskbar. I have my taskbar set to the top of the screen and when I start Flight Simulator Microsoft in full-screen or 1920 x 1080, he fills the entire screen except the upper part which is the bar of tasks, and because of this the windows sim who loses more space and shows its own menu with windows that... yet once loses more than space. The vertical extent of real world it takes away 1 inch of space on the screen that I find pretty ridiculous. These two programs are both manufactured by Microsoft, in my opinion, that they must work with each other, so I hope that im missing something in 2015?

  Thank you all

  Win 7 64

  AMD 955

  NVIDIA 460se

  4 GB

  Edit: Auto Hide on the top is not a solution but a miserable boring frustration.

  (Taskbar + tabs/url/search/minimize/output = someone must die)

  

  Thank you program is in windowed mode full-screen because of the taskbar.

  * See below screenshot of restoration

  for everyone who has this problem, I found a solution!

  Download rammichael.com/7-bar of tasks-tweaker

  Right click on the bar tasks once run-> advanced-> click disable_topmost options->, icon 7TT

  Enter 2 (starting from 0)-> click on apply and ok

  * Note that the program must execute to the difficulty of working so defined to run at startup during installation

  This program does a lot of things, but this will allow your taskbar to stay in place and allow it to be covered by windows.

• 2 How to save the settings for all users.

  I recently had to move the hearing to a vista machine.

  Now, the Setup is a slight pain in the * mainly because of Vista in Vista.

  But now that I put it in place under my profile how can I keep those settings for all users?

  When a new person connects to this computer, it goes to the built-in default material (which of course didn't is not connected to anything) and not to the sound card that is connected to the mixer.

  So what I'm after, is a way to save all settings (including workspaces) and their default for all users (including users)

  (Please tell me there's a way to do it...) Having to configure AA for each trainee or a guest is going to be an incredible pain in my *.)

  Thank you.

  Audition CS6 and later have the opportunity to create "Machine-specific device settings" that replace a users roaming profile preference files when you connect to jobs at random, but cela was not available in Audition 3.  There may be solutions workaround, depending on your network configuration, but nothing as nice and direct.

• How to configure the VPN for Xperia phones

  I know that this does not work for many after the upgrade to KitKat but I just wanted to know how other users were using previously.

  Could you give me the settings or help me how to use these settings.

  VPN does not of course for a lot, but I guess that Sony will do something so he can fix it. But tell me how you used earlier. I am interested in knowing. Never used because I found it difficult. People told me that it is a sort of proxy to surf the net anonymously.

  Sachin4u wrote:

  ... VPN works of course not for many...

  Where did you get this info? I had this problem a few weeks in this forum channel and no useful response has been posted.

  But anyway: on Android 4.3, I added a VPN connection with the 'IPSec Xauth PSK' type and the pre-shared key. At the opening of the connection, I entered username and password. A few secconds later than the VPN connection to my home network with router Fritz Box has been implemented.

  Hopefully, I could help you, Titus

• How to view the settings for the sequence (info that is displayed when you open the first sequence)?

  Hi, I would like to ask how to view the current settings of the sequence, I'm already working the same information that is displayed when you open for the first time a new sequence

  for example.

  General

  Editing mode: QuickTime DV PAL

  Time Base: 25.00fps

  Video settings

  Image size: 720: 576v (1.4587)

  Frame rate: 25.00 FPS

  Format of the pixels: PAL D1/DV widescreen 16:9 (1.4587)

  Fields: Bottom field first

  Audio settings

  Sample rate: 48000 samples/second

  Default sequence

  Total of the video tracks: 3

  Master the track type: stereo

  Audio tracks:

  Audio 1: Standard

  Audio 2: Standard

  Audio 3: Standard

  I forgot what setting I chose for my current sequence and tried to look under project settings , as well as the sequence settings

  but do not show the news that you see when you open a new sequence for the first time, especially if the edit mode is PAL or NTSC etc.

  How can I find this information which my current sequence is on?

  Thank you

  Sequence / sequence of setting you will find all the information.

  If his pal, you're on 25 or 50 fps.

  the rest is ntsc.

• How to change the settings for time-out HFM

  Hi gurus,
  
  Please help me how to increase the time-out setting waiting for Application HFM (11.1.1.3) running on Windows 2003 SP2.
  
  Thank you
  Shashi

  Here are the steps to change the expiration time of in IIS:
  Go to IIS, in the list of Web sites, select hfm, right-click on it and select Properties, this will bring the virtual directory in view tab, otherwise click on this tab.
  Click the configuration button, and then click the Options tab. Time out of sessions should be displayed within minutes.

  If you prefer to go in the way of the EMP Configurator, the Start button all programs->-> Oracle EPM System-> Oracle Foundation Services select EPM System Configurator.
  Once it works financial management select in the first screen, and then configure the Web server-> Configure IIS for Webapplication of financial management;
  You should see the 1200 seconds Web session timeout, change it according to your needs. Do not too big, you want that users initially.

• Effects: how to call the "settings" for individual filters

  I remember in earlier versions of PE, when I applied an effect to a photo (artistic, blur, noise, etc.), there was a bar of tools/dialog box that would allow me to set unique settings for each effect.   Now, in PE 9 (for Mac), I can't understand how to access these parameters - they do not automatically appear when an effect is selected and I can't find the place where to turn this 'on '.

  I've searched and searched and searched for this, but may not know how to do this.

  Thank you!

  If you want filter dialog boxes when you use the effect controls panel, click

  on the little arrow facing downwards (highlighted in red on the screenshot below)

  and click on automatically see the filters Gallery (shows the filter dialog boxes).

  

  MTSTUNER

• How to change the settings for component installation

  When I install componnet at the University Complutense of MADRID, there are a few settings. After the installed componnet, how can I change the settings? I hope I is useless for the re - install.
  
  Thank you

  Hey, Aacc,.

  If you go to the administrator of the server, click the server in question, then go to the Component Manager there will be a drop-down list at the bottom of the page for 'Updating components'. If you choose your component from the drop-down list and click on update settings screen will go up. Based on how you have your updated component implemented to read these values, you should not even have to restart the content server.

  Hope that helps,

  Andy Weaver - Senior Consultant software
  Fishbowl Solutions< http://www.fishbowlsolutions.com?wt.mc_id="L_Oracle_Consulting_amw">

• How to change the settings for screen rotation?

  How can I change the screen on my Symphony GoFox F15 rotation parameters? I don't know how it has changed, but before change it worked normally. Now I want to change the settings manually on the rotation of the screen. How can I do?

  Go to settings, display, and then select "lock direction" off screen rotation and disable to stop rotation of the screen.

• How to configure server settings for my Norton antivirus to analyze my email

  According to Norton to the analysis of e-mail
  This feature does not work if your SMTP or POP3 messaging port is a port of SSL encrypted e-mail. Norton Internet Security supports all e-mail programs that use non - SSL POP3 and SMTP communication protocols
  so should I change the settings or find another email provider

  Regularly see us looks like this and it is difficult to answer because the answer will almost certainly cause offense.

  SSL is the way of the future and you can't collect mail in Gmail, Yahoo or Outlook.com e-mail client unless you use it. Most of the suppliers are also being implemented, as well as IMAP mail to support the connected peripheral world. If your anti virus program can not live in a secured environment, it's time to have one that can. Or better yet have one which does not scan send them at all.

  Analysis of email is very difficult to justify other sounds good in marketing materials. Thunderbird does not allow scripts to run, and is the only way you can get a virus from an email in Thunderbird by opening an attachment. ALL virus programs I've seen have a component (it has a different name for each product) that claims to scan files when you open them and stop infected programs to launch. So, when your attachment is launched, this component will catch the event and stop the infection occurs.

• How to change the settings for the Touchpad on Portege R500

  Hello world
  I have a problem with my touchpad settings.
  Can I know how can I change the settings of my touchpad?

  The touchpad settings can be changed in the dashboard-> pout.

  There, you should check the PIN.
  On my laptop, the device settings tab provides an option to access the Synaptic touchpad settings.

  Check it!

• How to configure the adapter for network WRT54G wireless

  I downloaded the driver for a tenda usb adapter.  What else should I do to connect to the network WRT54G? I am currently connected via an ethernet cable. Running Windows/7.

  TIA,

  Phil

  OK, I found out how locate network and connect. The only problem was that I used the password instead of the key WEP.

• How to change the settings for time-out HFM in version 9.3.3

  
  Dear experts:

  We wonder how to change the setting of user HFM time-out in HFM 9.3.3 running Apache Web server. I found the discussion for HDM 1.1.2 in this forum, but we have this old version of HFM. Please notify.

  Thank you in advance.

  Hello

  Review of the below mentioned knowledge article.

  Hyperion Financial Management error "Session expired" (Doc ID 1372208.1)

  Hope this helps,

  Thank you

  Charles Babu J

• How to configure the switch for JMS bridge

  Hello
  
  I tried with the selector option when working with several bridges, here is the scenario that I applied.
  
  Created five queues ( Q1, Q2, Q3, Q4, and Q5 ) and configured JMS bridge Destinations with each queue with the factory of unique connections ( CF1, CF2, CF3, CF4, and CF5 ) and baptized as D1, D2, D3, D4 and D5.
  Then created JMS JB2 bridges with D1 source and destination as D2. Similarly the JB3 as D1-D3, as D1-D4 JB4 and JB5 as D1-D5.
  And sector for each of the JB2 JB3 and JB4 JB5 as two, three, four and five respectively and reboot after the changes.
  
  Now I expect the following scenario to work
  By pushing the message to Q1/CF1 with two in the content of the message, so wait for the message to be delivered to Q2/CF2 through JB2, but messages is not moved by JB2.
  Similarly, message pushed to Q1/CF1 having three in the content of the message, so waiting for the message to be delivered to Q3/CF3 by JB3, but messages is not moved through JB3. Similar behavior for other messages with four and five in the content of the message.
  
  In the bridge configuration, selected QOS as "Atmost" - once.
  
  Note: all configurations were conducted in the same field and the WL version is 10.3.6.0 *
  
  The example message I am pushing to Q1/CF1 say 'two Test Data'* and expect to reach the queue Q2/CF2
  
  Concerning
  Venkata Madhu
  
  Published by: vv * Sep 12, 2012 13:05

  JMS selectors work normally om jms headers and not on the message.

  In my previous post, I see that WebLogic provides an extension "SELECTOR xpath" in this area, although I recommend using standard selectors when possible. See my previous post for more information on the syntax of the selector, etc.. The best resource on selectors is the javadoc for javax.jms.Message (http://docs.oracle.com/javaee/5/api/javax/jms/Message.html).