How to create a bootable virus scan disc

Similar Questions

• How to create a bootable recovery discs recovery partition?

  OK, I found a few old recovery disc for Windows Vista professional for Compaq 6720 s.

  Now I have 2 questions:
  (1) how to create these recovery discs recovery partition?
  (2) my version of the partition is Vista. I've updated to Windows 7. How do the Vista recovery partition 7?
  Thanks for your help and your time! I appreciate it...

  Any recovery partition is created by the PC manufacturer and nothing to do with MS

  No win version, upgrade or install clean, has already created a recovery partition

• Portege R100 - how to create a bootable SD card?

  Hello

  I'm trying to update my BIOS of v1.40 to v1.60. I don't have an external floppy drive, or a CD-Rom. I downloaded both versions of the bios upgrade. The version of windows does not install, coming up with an error of not being able to run in V86 mode.

  I read in some places to a SD card bootable using the Boot SD and a 2,88 MB image. Where can I find this picture? And how to add the update to the BIOS for it? Or what is the problem with the BIOS update, I downloaded?
  Thanks in advance for any help you may be able to give me.

  Post edited by: Bertee

  Hello

  You can create a bootable SD card using the SD start utility which is preinstalled on some Toshiba units. But as far as I know with this card, you can start only to the DOS mode and there is no image on the SD card! Moreover, I don t think you can upgrade the BIOS with an SD card. To update the BIOS, you need a compatible floppy drive.

  What are supported readers for this device:
  http://support.toshiba-tro.de/KB0/TSB5100S70004R01.htm

  You will find a description how to update the BIOS:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000000b07

  Good bye

• How to create a bootable Windows Vista USB drive? I can't install Windows Vista with a disk because my dvd drive does not work.

  I have install vista and I want to convey in the USB key... because my dvd drive does not work... Please tell me what I need to do

  Please send your reply to my email id, or post it here...

  Hello

  Vista is not designed to be installed like this.

  But others led to ways to do so.

  This may interest you on this subject:

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  Google will help you in this matter.

   

  See you soon.

• How to create a Vista 64 installation disc, in preparation for a windows 7 UPGRADE?

  I'm about to buy a 64-bit Windows 7 UPDATE.  My Toshiba laptop came with a Vista 64 operating system CD.  I know there is a patrician who has this info.

  How create a Vista 64 installation disc if (God forbid) I never do a regeneration full of my system?

  You must contact the manufacturer of the computer for this procedure - it's their process, not Microsoft.  Procedures vary by manufacturer and sometimes even depending on the model.  The information can be displayed on their Web site, if you are looking for that specific computer - but if available and free, I would just contact support by phone or chat or however and the explanation directly from a human being.  Often only make a set of disks, so don't forget to do things right the first time.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite L300D-13s - how to create a Bootable USB Flash for Vista Recovery drive?

  Hello

  Has anyone ever created a Bootable USB Flash of their Vista HARD disk recovery drive? If Yes can you help me create mine? I know that you can do for the new OS and that Toshiba provides a tool for this.

  Thank you

  Something like this is not possible. I have older machine tool and I can confirm that recovery USB media cannot be created DVD only.

• How to create a bootable DVD/USB since the recovery Partition?

  Hi guys,.

  So, I have a Toshiba Satellite L505-141 (of Greece) and my broken hard drive. Unfortunately, I lost my recovery discs. I changed my hard drive, I installed the operating system, but I would like to have my computers it was (with all crapwares... Wink)

  I found a guy with the same laptop and it can send the recovery disc. In fact, he has already sent the disc 2 (he sent me two copies of his CD online) that he created when he bought the laptop (by recovery media creator). However, these discs are not bootable and (I read) that you use just them and when you restart the system through the Recovery Wizard. Unfortunately, it has not worked for me (at least with the CD of my friend sent me).

  Do you know some way that I can do? I want to get my friend a recovery disk? Can he create an ISO of the recovery partition?

  Any suggestion is welcome!

  Post edited by: GeoKoro13

  Hello

  To be honest I n t have experience with such things, but I found very interesting document in the knowledge base of Toshiba - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm

  Check it out.

• How to create USB bootable for installing Windows 7?

  Hello world

  I run Windows 7 and want to reinstall but did not a resumption of discs and missing hard disk image. I got a copy of Windows 7 and tried to make a bootable usb key with WinSetupFromUSB and Novicorp_20WinToFlash programs but without success. Is there another method to do?
  The Bios supports the USB key.

  Thank you

  Sorry for my English (I'm German)

  Hello

  I don't know why you can't make a bootable USB stick with the programs you mentioned. It is very easy. The link suggested by peterk_1 is also useful and can help you.

  You can also try to do as below:

  1. Insert the USB key which should not be less than 4 GB for Windows 7.
  2 run as administrator at the command prompt.
  3 type Diskpart and press ENTER, then List Disk and Enter. You will see the disc all available, including Usb flash on your computer. In my case, usb flash is determined as disk 1 in your may be disc 2, so type:

  If yours is disc 2 you choose select disk 2 (thus, in each order line)

  SELECT the DISC 1 press enter

  CLEAN, press enter

  CREATE PARTITION PRIMARY, press enter

  SELECT PARTITION 1 press enter

  ACTIVE press enter

  FORMAT FS = NTFS press Enter

  Note for quick formatting, you can use FS = NTFS QUICK

  ASSIGN, press enter

  EXIT, press enter

  Do not close the command prompt window, disc insert Windows 7 dvd and check what letter is assigned to the cd/dvd drive. In my case, you s F:

  So:

  Type in F: and press ENTER, then

  F:\ BOOTSECT. EXE NT60 H: H;? is assigned to the USB key into your computer, it may be another letter.

  Now, you just need to copy all the folders on windows dvd disc. That's all

  Alles Gute!

• How to create a recovery without a disc writer drive

  I want to create a recovery disc for my 13 edge that has no internal disc burner.

  Unfortunately rescue & recovery does not offer to create an ISO collection that I could then burn it on another computer.

  I have an external DVD drive, but no writer. So, I'd be able to boot from a CD of restoration if I could create a.

  I inserted a USB and Rescue and Recovery can write to it, but in my experience USB keys are lost or overwritten easily so I prefer a CD as recovery media.

  So my question is:

  Is it possible to make a key USB bootable recovery CD, or perhaps create an ISO with R & R recovery disk?

  Or can I just burn the stick as a data CD?

  ADD ON:

  I just tried to test booting from the USB stick recovery created but it did not work

  I was able to select the USB key to the F12 prompt, but the screen stays white with a underscore cursor in the upper left corner. After 2 minutes, I gave up and started normally new so I don't always have a recovery media.

  latimerio wrote:
  ...

  ADD ON:

  I just tried to test booting from the USB stick recovery created but it did not work

  I was able to select the USB key to the F12 prompt, but the screen stays white with a underscore cursor in the upper left corner. After 2 minutes, I gave up and started normally new so I don't always have a recovery media.

  This can help make the bootable flash drive.

  New or second-hand memory key USB or USB key requires an active partition created from wind...

  Note, you can set the partition active after creating a media recovery - just use the command 'active', but not 'clean', 'create' or 'format '.

  Z.

• How to create a bootable pendrive NTLDR (Windows Xp)?

  I have Windows Xp and Vista and Ubuntu and SUSE. I am the computer program with C and Assembly.I had developed an operating system of my car. I did detect Windows XP and higher, and GRUB. I also did a function to fix the MBR, sector, etc. I tested on my Windows Partition.Then, I rebooted my system and my xp Boot loader is not loading. So now, I want to create a USB key with Windows Legecay Loader(Windows Xp NTLDR) and configure boot.ini and define a partition C to start with the charger on the USB.

  Now, I just want to know how to install the boot on the USB Manager.
  Also, I want to know how to repair or reinstall the TI back on my partition.

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

  Check if that helps.

• How to create the Windows 7 installation disc

  Hello

  I just got my new HP Pavillion g6, but it came without the disks. It has Windows 7 on it and I would like to create a Setup disk in case I need to reinstall the system. I also need to create a disk with all the drivers for the hardware.

  Thanks for any help

  Hello

  Make sure all your backup files before you restore the computer/PC laptop to factory State. If you use the original hard drive and have not deleted the recovery partition, your machine must have a recovery partition.

  To set your PC/laptop to factory State, restart the PC/laptop. HP welcome screen, press the F11 key to start the recovery process. Follow the instructions on the screen.

  Good luck

• How to create a startup win xp boot cd

  I have an amd 400-1200 mhz with 512 MB mem and a 15 gig hd.  Also a cdrom and dvd player, also a 3 1/2 diskettes.  I have windows xp home with serv pk 1 & 2 ed..  Run all diagnostic tests, but it does not start my hd or the Dominican Republic to cd.  I tried the Dr. disck did to install and they let me in the back and cannot start from the cd win xp disk.  How to create a bootable cd?  I have a second machine with win xp & sp3 with a cd - rw dr.

  Hi regcaim,

  Follow the steps in the article.

  How to create a boot disk for an NTFS or FAT partition in Windows XP

  http://support.Microsoft.com/kb/305595

  How to get the installation discs for Windows XP for installation of boot floppies

  http://support.Microsoft.com/kb/310994

  For reference: How to create a Bootable CD-ROM

• How to create a repair disk in Windows XP

  Hello

  How to create a Windows XP REPAIR disc?

  I have Windows XP version 5.1, Build 2600.

  Thank you very much

  Michael

  What do you think needs repair?

  You were not able to find something suitable in the tutorials section?

  You can make a CD of XP bootable following Recovery Console:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• How to create the Sierra startup disk?

  Hello world

  I downloaded Sierra on the App Store.

  Can I create a bootable USB Sierra drive?

  I want to install a new copy of Sierra, not upgrade.

  Thank you

  Abdelaal

  Hello

  The download size is about 4.8 gig and want 8 GB on a USB key or similar.

  I used the command line, but there are other ways.

  http://osxdaily.com/2016/06/15/make-MacOS-Sierra-beta-USB-boot-drive/

  and it may be better (which I used)...

  http://www.Macworld.com/article/3092900/Macs/how-to-create-a-bootable-MacOS-sier ra-Installer - drive.html

• Create a bootable CD

  I was trying to run MEM Test to identify the problem and hopefully fix my card of 1 GB PC5300 DDR2 Ram that I just installed in my HP Pavilion a1340n.  Programming I have is WIN XP Media Center Edition 2005.  When I tried to copy the iso bootable on a cd, it did not work.

  What I've done wrong? How to create a bootable cd?

  Use one of the two commercial software to make a DVD bootable from a .iso file
  Download and install burn ISO Gear:
  http://www.GearSoftware.com/gear-ISO-burn.php

  ImageBurn:
  http://www.ImgBurn.com/

  CPU ID (CPUZ): http://www.cpuid.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs (memory and SPD) that indicates the actual speed of the memory and 'SPD' tab displays the nominal speeds
  for each memory location is full.
  #2 Note:
  COMPARE the two values, the actual speed should not exceed the rated speed of your memory.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.