How to find users VPN Live using SNMP?

Similar Questions

• How to find users and groups in the Sun box

  Please adivce how to find users and group in sunsolaris
  
  Thanks in advance

  We can get all the details of the Group of the file/etc/Group.

  Similarly the user details are in/etc/passwd.

• How to create a static ARP using SNMP?

  Hello

  I want to create a static ARP using SNMP.

  I can delete an ARP by setting oid ' 1.3.6.1.2.1.4.22.1.4' to '2'.

  But none of

  '1.3.6.1.2.1.4.22.1.1 '.

  '1.3.6.1.2.1.4.22.1.2 '.

  '1.3.6.1.2.1.4.22.1.3 '.

  '1.3.6.1.2.1.4.22.1.4 '.

  can be modified or created

  SNMP-server community is RW

  I can change the other oid, for example 'type sysName' oid 1.3.6.1.2.1.1.5.0

  I used this command to create a new ARP:

  set SNMP v2 192.168.10.1 private oid 1.3.6.1.2.1.4.22.1.1 integer 1

  the answer:

  SNMP response: reqid 16, errstat 11, erridx 1

  ipNetToMediaEntry.1 = 1

  errstat 11 is NOCREATION

  And I used the tool "Mib Browser" to set a static ARP.

  the answer is NOCREATION too.

  I searched a lot of time, a lot of people have this problem,

  someone said the oid ipNetToPhysicalPhysAddress or inetCidrRouteTable is alternative,

  but our switch do not have these oids.

  I can't find a solution.

  I want to know if the task can be performed.

  Help, please.

  Concerning

  Dear Fu

  Thank you to reach small business support community.

  I'm not positive, that this can be done on small business goes, however, what is your version of the model and the firmware of the switch so I can continue the investigation.

  I'll be looking forward to your reply.

  Kind regards

  Jeffrey Rodriguez S... : | :. : | :.
  Support Engineer Cisco client

  * Please rate the Post so other will know when an answer has been found.

• How to find the ADF version used in a deployment archive?

  Hello
  
  When I get an ear/war file from a developer I want to deploy on a Weblogic Server it would be nice to be able to verify that the ADF version developers used is the same that is installed on the server.
  
  I tried to look at different deployment files but I can't find anything about it. Can anyone help?
  
  I can see the JSF version but noting on ADF.
  
  What about Peter

  I see your problem but do not see how you can get the information of just the EAR file as long as it is not put there by purpose. The required information is part of the jars that are installed on the servers. They are not part of the ear, but are only referenced.

  For the server side, I've written a web service that I install on each server (managed server that runs to the ADF, run time). This service at least tell me the version installed on the server. You can find the service including the source to my blog http://tompeez.wordpress.com/2012/02/05/adf-how-to-find-out-which-adf-version-is-installed-on-a-manged-weblogic-server/.

  There was a discussion on this forum and the ADFEMG google Group discuss how to know what the newer version (from sources of a project) was used to develop the App. Unfortunately, today you can't get a definitive answer to this. There is an ER out for it to allow in the future (http://java.net/jira/browse/ADFEMG-70).

  Timo

• How to find the security protocol used by a site in firefox to version 24.6.0

  I'm unable to find the security protocol used by the site, either SSL or TLS 1.0 or 1.2.

  I see my answer above is marked as useless, so I guess it doesn't help for Firefox 24.

  You should be able to see which version of the TLS Protocol and encryption to agree to the current use of press.
  You can use the above posted extension or check in the Security tab of the Web Console (Firefox/tools > Web Developer).
  24 Firefox supports only TLS 1.0 (security.tls.version.max = 1), so that only leaves you with Protocol to guess.

  • http://KB.mozillazine.org/security.TLS.version. *
  • 0 means SSL 3.0, TLS 1.0 means 1, 2 means TLS 1.1, 3 means TLS 1.2 etc..

  In Firefox 24 you have the Security tab in "tools > Page Info > Security" to see what level of encryption is used, and you do not see what costume of encryption is used.
  To find you would have to disable any combination of encryption algorithm by setting the Pref security.ssls false and allow both until you get a secure connection.

• How to find out really currently used physical memory and swap space of hard disk to the virtual computer running?

  Suppose that I'm leaving WinXP hostOS a guestOS. Then a part of this guestOS remain in physical memory and another part is deployed on hard drive in the swap file resp swap partition.

  First question: the complete *.vmdk loaded into memory/swap space or only the part that is currently required?

  Perhaps only a *.vmdk 800 MB / 3GB is really responsible. But these 800 MB could be extended to 2 GB, because the content of these 800 MB is not compressed during load or guestOS drivers allocate additional memory.

  *. VMDK size seems so NO indicator for the actual amount of used memory / swap.

  How will I know how much physical (a) memory and (b) the hard disk swap space EXACTLY is currently occupied by a certain virtual machine running?

  Matt

  mattad wrote:

  First question: the complete *.vmdk loaded into memory/swap space or only the part that is currently required?

  The vmdk is not loaded into memory, because it is the drive of the virtual machine.

  *. VMDK size seems so NO indicator for the actual amount of used memory / swap.

  Yes, of course not. The memory used by the client is not related to the size of hard but the RAM assigned in the options of hardware reviews.

  How will I know how much physical (a) memory and (b) the hard disk swap space EXACTLY is currently occupied by a certain virtual machine running?

  Open the Task Manager and find a task vmware - vmx.exe or vmware-vmx - debug.exe.

  The swap file should be used if you have chosen to allow that VMware Workstation is authorized to Exchange. The file where swaps to door expansion .vmem Workstation. Search folder of comments.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• How to find which server I use

  I have windows vista 64 bit, I would like to know what windows server I use.
  And, if I can update.
  Thank you

  I'm Katrina58 sorry, but your post makes no sense, as written. There are several versions of the Windows Server operating system (ex. 2003 server, 2008 Server, Small Business Server, etc), none of which is Windows Vista 64-bit, which is a separate operating system. Please specify which computer you have and what you're trying to do. These links will help.

  http://www.elephantboycomputers.com/page2.html#Usenet (you can ignore the references to Usenet discussion groups / as you post on a web forum, but any suggestions on how to write the post are applies here too)

  http://support.Microsoft.com/default.aspx/KB/555375 - how to ask a Question
  MS - MVP - Elephant Boy computers - don't panic!

• How to configure RV042 VPN to use Windows 7 client native IPSec?

  The question is in the title, I want to make the Windows client compatible with my RV042 VPN because Shrew Soft VPN fail to tunel after that little time and QuickVPN do not support Windows 7 or a 64-bit version of Windows.

  Windows does not have an IPSec client, what they offer is a VPN client that can connect to PPTP, L2TP/IPsec (on IPSec), IKEv2. To connect directly to the router RV that our only option is to connect over PPTP once the PPTP server protocol is enabled on the router. If you have a server located behind the router, you can configure to be an endpoint to one of the above types. Don't know why, Mac and Windows don't have a naked IPSec feature built-in clients.

  Some third-party applications to consider:

  Windows: ShrewSoft IPSec Client

  Mac OS X: IPSecuritas

  Both are relative simple to set up and on the routers RV0xx work fantastic and an exellent substitute QVPN. With these applications you set up the tunnel as a group and use the "XP/2000 Microsoft VPN Client ' option." " This option is a bit misleading because it seems to imply that the native VPN client can support IPSec settings, when it referred only that a computer would use this option during its WAN IP address is not always known.

  I hope this helps.

• How to limit users booth at use of IE per login 1 hour, 30 minutes confined to specified (white list) fields only?

  I'm working on a kiosk workstation setup program that would allow our users an hour of time on the web. The user is logged automatically and I would like to limit their use of the web to avoid too linger. The optimal configuration would allow accessing a website up to 30 minutes and the navigation on areas of our total institution up to an hour. What is the best way to implement?

  Hi SQLDave,

  I suggest you to report the issue in The Forums Pro TechNet Windows 7 IT: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Thank you.

• How to find the OS includes use for OSDBA OSOPER, OSASM

  can I know how can I check what os groups are used for OSDBA OSOPER, OSASM after installation?
  
  I have root privileges.

  view $ORACLE_HOME/rdbms/lib/config.c

  Hemant K Collette

• How to find an object/text using a specific color? HAVE CS4

  Hi all:

  I have a very serious problem. I built a doc using a custom color palette, and then I changed the colors in the palette and modified also all objects and related graphics to the new palette.

  But there is one obsolete color still appearing in my color chart, and I can't remove it try all known ways.

  Therefore, there must be at least one thing that still use this color, hidden hidden somewhere.

  I tore up the doc apart, as well as all the docs of linked graphics and still can not find it.

  Is it possible to find a doc for something else (text, path, object, etc.) that uses a specific color? Less, then, I can find the darn thing.

  Sorry, I forgot to mention. I use CS4 I

  Thanks in advance.

  Hello

  I think that these can be useful...

  Method 1:

  Draw a rectangle with the color box. and go to Select > object > same fill color or Select > object > same outline color, then you can find the similar color objects.so you can easily remove.

  
  

  Method2: (If you have acrobat professional)

  Create a PDF file and open this file PDF Acrobat Professional. go to Advanced Options > print > overview of overprinting, keep there only that color. then it shows where you used this color. so that you can easily remove

  hoped it, would be useful...

  HARI

• OBIEE 11G - how to find automatically physical table using a report

  Hi all

  Is it possible to take a catalog of reports and retrieve the complete list of database tables that use these reports. Suppose I have a
  great list of reports may be 200 or more and I need to know what are the tables of these reports (analysis) are dependent on. Clearly, I could open an andextract the XML definition but I want to automate this process

  Best regards

  Benoit

  The XML definition does not have the physical database table - it doesn't even SQL logic.

  SQL logic is generated when executing of referral Services, which sends it to the BI server, which then decides what physical tables, it will hit. Even in this case, according to things like global navigation your report even likely face different DB tables depending on the State of the hierarchical columns etc.

  SampleApp includes some features that may be interesting for you - take a look at the dashboard page 10.21 physics of the Clause and see details on 10.11 (physical SQL Generator / physics of the Analyzer of the Clause).

• How to find all the pages using the table

  Hello
  Can someone help me find a list of the pages of the APEX in an application which, as based on a particular database table.
  Basically, I need to find the page names that should be changed to a change on the structure of the database tables.
  Thanks in advance
  Aali

  "Database object dependencies" APEX report can help too

  From the manufacturer of the APEX
  Home > Application Builder > Application 102 > Application reports > shared components > dependencies of objects in the database

  CITY

• Prerequisite patches no, how to find?

  Hi all
  I'm running 11.5.10.2 on Oracle Linux 4 and is about to install a patch 5479427 . Read me for him (below) indicates that I need to check/install
  the following patches of prereq. How to find them. I used to do the following:
  
  Select * from ad_bugs
  where numero_de_bogue = ' < patch # > ";
  
  What of the following:
  
  ==================================================
  Prerequisite updates
  ==================================================
  This fix requires additional required fixes have been successfully
  applied to your system so that it can be applied. These required fixes, as
  at the time when this patch was built, are listed below. Please check Oracle
  MetaLink to determine if one of them have been replaced
  
  11i. HZ. L - Minipack 11i. HZ. L
  11i. UMX. H Patch 11i.UMX. H
  11i. OPE. H Patch 11i.XDO. H
  11i. T2K. B Patch 11i.TXK. B technology battery Minipack B (also in 11.5.10)
  11i. VAC. B Patch 11i.CAC. B
  11i. AK. G Patch 11i.AK. G
  11i. ALR. G Patch 11i.ALR. G
  4676589 - 11i. ATG_PF. H.RUP4
  11i. JTA. F 11i. JTA. F
  11i. BDM I.2 - Minipack 11i. BDM I.2
  11i. EC. G Patch 11i.EC. G
  2614213 SOUL PATCH: DELIVERY OF PRIORITY GA AND RULE FEATURES
  11i. DNF. H Patch 11i.FND.H
  3412795 ADSPLICE PATCH FOR OPE
  
  Thank you
  Eugene
  
  Published by: epipko on June 19, 2009 09:03

  Hello

  You can use the same select statement if you have the patch number (Metalink for these packs families to get the patch numbers-"Patches & Updates" tab search > Simple search > enter the name of the Patch - for example, 11i.) UMX. H--> this will return 3264818).

  Or, you can run "Oracle Applications patches comparison utility - Patchsets.sh group" as this script lists all the families packs installed on your instance.

  Note: 139684.1 patchsets.sh - Oracle patches comparison Utility group current Applications:
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=139684.1

  Kind regards
  Hussein

• How to find oracle edition?

  If I want to know the Oracle edition for this database, how to find?
  I know how to find version of Oracle using v$ instance. Is there a similar way to discover Oracle edition?
  Pleasse help
  Thank you
  S.

  Hello

  Check V$ version.

  A method more is when you connect SQL PLUS it displays "connected to the edition that."

  -Pavan Kumar N

  Published by: pounet on November 18, 2008 22:33