How to install Hotkeys on Satellite A10 521

Similar Questions

• How to install Vista on Satellite M40-237?

  Can help guide me how to install vista on satellite m40-237?
  It hangs at the starting phase.

  Vista compatibility tool has shown this compatible machine to install vista.

  Hello

  Satellite M40 is about two years old and this laptop is not taken in charge of Vista. I guess this hood must be new BIOS for Vista installation. Unfortunately will not create new Toshiba Vista supported BIOS and all drivers for this model of laptop. :(

  Computers laptops capable only Vista will be supported as far as I know.

• How to install WXP in Satellite A205-s5859?

  Hello

  I have a laptop Toshiba Satellite A205-s5859 new (US series), and my laptop was completely done by virus so I just want to install Windows XP instead of Windows Vista which is now experiencing in my laptop and wants to make a new partition.

  When I try to install Windows XP Home edition, I get a problem which is in the Middle while confuguring my system hardware (blue screen) a messege is appearning like * "Setup did not all hard disks in your computer instead. Make sure that the hard drives are powred on properly connected to your computer and that all disks associated hardware configuration is correct. It can be runnning an installer of manufacturer_suplliedd diagnosticor "* and dvd r/w works correctly because of this message iam not able to install xp so please help me to solve this problem."

  VJ

  Hello

  How to install WXP on this notebook is identical to that described in
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=42951 by Andrej.

  Check it out. Please also check which driver SATA do you need and check page Toshiba U.S. per download.
  I am from Europe and Satellite A205-s5859 is not known to me.

  The Toshiba US support page - http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download

  Good luck!

• Re: How to install HDD on Satellite L300-19Y?

  Hi guys

  I'm not too good with computers but have bought a new HARD drive for my L-series I've been informed that my HARD drive is maybe broken due to errors when I perform chkdsk checks and the fact that it freezes and crashes randomly.

  In any case, could someone tell me how to install the HARD drive? I bought an another similar to the original hitachi in the laptop, that is to say sata, 2.5 ", but got a 250 GB, rather than the 160. What I have to install anything, or have complicated everything to do? I don't know how to install it physically just don't know if I have to use my discs of recovery or something like that?

  Bravo guys

  Hello

  There is no difficult things to do to swap the HARD drive. Which is a fairly simple process and he s done in 5 minutes I think.

  I have the Satellite L300 in front of me. To swap the HARD drive, turn off the laptop and remove the battery and the AC adapter. On the underside, you can find the cover of the HARD drive which is fixed by 2 screws. Remove the screws and the cover of the HARD drive, you are now able to exchange the HARD drive.

  If you have any other questions, please let me know! :)

• Should re-install XP on Satellite A10 - I use the restore CD?

  Hello

  I have a laptop series satellite (A10), bought new 2 years ago.

  Recently it has been running very slow and after a lot of advice, I decided to reinstall windows.

  I can do this with the product recovery cd supplied with my computer? I have the 3 original supplied with the computer disks. If it is possible, how? I read on another post (for another series PC Toshiba laptop) that this is to boot from the cd by pressing c when starting the computer - is it right for the A10?

  The process is this difficult? I have an external hard drive to back up files, etc.

  Cheers for any help

  Phil

  Hello

  If you really want to reinstall your system, use the recovery CD.
  First, you should back up your important data on the external drive.

  Then, as you already know, boot from the recovery disk #1 by pressing 'C' at the start of the laptop.
  (This sometimes does not work, then you will need to press F12 for the boot menu, or press ESC to enter the BIOS to change the boot priority.)

  If the computer starts from the disk (Win98), then simply follow the menus that appear (it's really easy!).
  But remember, the whole HARD drive will be formatted.

  Good bye

• How to install Vista on Satellite M40-298?

  I try to install vista on Satellite M40-298, but in the end, on the last restart, it crashes.

  My graphics card is ATI, hard drive 80 GB Sata, 1024 MB Ram...

  Can someone help me?

  Mary,

  installed all the drivers for this machine? If this isn't the case, I suggest you to do this and if your machine does not start or pause then start windows in safe mode vista and install the drivers.

  If you need a link for some drivers vista, just try it here:

  http://PC-support.Toshiba-Europe.com/Vista/

  Good luck
  Welcome them

• How to install XP on Satellite L40-14B

  How to install windows xp on this laptop?

  I tried and I can't. Say that he didn't plant the hard drive.
  The hard drive is sata.

  In the Bios I have much choises. I wanted to switch from AHCI to ide... but I do not have it.
  I therefore now vista... is the only system that worked on it... but I cannot start without thread on this.

  BTW: where is the led when the wireless is on this laptop? I sow where it is?

  I think that a bios update should work... but I can't find one. Now I 1.60... and it's only for vista.

  So, if someone can help me pls.

  Check back for the right driver WLan and the new BIOS for XP.
  Then, everything should work fine

• How to install Win7 on Satellite C870-190?

  Hi, I hope I'm posting in the category right forum then...

  My laptop is Toshiba Satellite C870-190 and it doesn t want to start my windows 7 CD.
  I tried first with the DEL-button that opened the system startup when I start Notepad and then choose the CD-ROM device and do not want to load the CD and then I chose F2, the first unit on the boot to the CD-ROM section, still do not want to load it... the final solution, I tried to install it from the Windows 8 (current operating system) from my computer--> CD--> setup.exe, and then click INSTALL.

  My computer laptop doesn t have allowed me to install it even from Windows... on file copy screen to say... and then it gives me an error that says that the operation failed... What is happening with this laptop?

  How can I format my HARD drive and then install windows 7?

  Thank you

  At the beginning I will say that I hope that you have created a recovery media (DVD or USB) before you have begun to install Win7.

  Return to your Win7 installation. A long time ago I installed Win7 on friends U940 and the first stage was changing course startup in the BIOS settings mode - http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm
  After the installation Win7 has started successfully, but in my case the SATA driver support was necessary.

  Please check first and send comments.

• How to install Sata on Satellite M70-340?

  My version of WinXP Pro does not see the HARD drive in sata mode. I read on the chipset and supports sata and my HARD drive. How can I install I do windows see my HARD drive in SATA mode. thanx

  Hello

  I'm a little confused about your ad.
  As far as I know the Satellite M70-340 has a SATA HDD and it should works with this mode. If you use the Toshiba Recovery CD so the AHCI (Intel SATA AHCI Controller) V5.1.0.1022 should pre-installed with the operating system.
  You must also install the Chipset (Intel ICH6M) V7.1.0.1014 first.

• How to install Vista on Satellite M40

  I have a Satellite Pro M40 and I think to install Vista on it. I have no problem with the development of an operating system on my PC, after many, many times before. but I'm not sure I put it on my M40.
  Can someone give some advice?

  Do I have to reformat the drive M40 first? If so, any reformatting program won't work or can I do it via the recovery disk provided. I am wary about using the recovery disc I do not know what to expect.

  Any help appreciated.

  You can choose several ways of instillation. You can upgrade XP to Vista, you can install the Vista on a second partition or you will overwrite the existing XP.

  If you overwrite the XP Vista will delete all installed applications.
  I recommend you to install Vista on the second partition.
  In this case, you can use the two operating system, XP, and Vista.

  When you start you laptop, you will get a Boot Manager.
  Then you could choose either XP or Vista

  PS: as much as I know many applications is not compatible with Vista, and you will need new versions (if they exist!)
  At the moment no Vista drivers are available for M40 :(

• How to install Vista on Satellite A300 without recovery disk?

  Please, I desperately need help.

  My brother bought a new Toshiba A300-23F in Saudi Arabia. He has little knowledge of computers.
  It's on the screen threre.

  He sent it to my father in Pakistan but quickly noticed it was full of viruses and it installed fresh Windows xp SP2 after formatting hard drive.

  He gave me to fix the problem. Because it is designed for windows vista. I want to install windows vista, but I do not have the disk recovery or operating any drive.

  How am I suppose to install windows vista?
  Someone told me that I have download the vista track and enter the key that is on the back of my laptop.

  Anyone with an idea. Please

  > He sent it to my father in Pakistan but quickly noticed it was full of viruses and it installed fresh Windows xp SP2 after formatting hard drive.

  It was a big mistake buddy
  The recovery disk is not shipped with the laptop because he had a tool preinstalled called creator Toshiba Recovery disk that allows you to create a clean recovery disc.
  But this is not possible because the HARD disk has been formatted and all files have been deleted.

  Now, you would not be able to recover the camera even using HARD drive recovery because the files are not available on the HARD disk.

  You need a recovery disk, and you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• How to install bluetooth in Satellite A100-787?

  The doc that comes with Bluetooth monitor for this computer says that certain files must be present in the c:\Toshiba directory but I n t have this directory at all in my computer. I installed the BtMon2Inst.exe file (which is recommended for installing XP SP1) which seems to have installed fine but do not know if Bluetooth or not functions.

  Any idea on the steps and files needed for a correct installation?

  Bluetooth Monitor you can find on the download page of Toshiba. Search for Satellite A100 (PSAAN). Download and install Bluetooth monitor.

  According to the Instructions of facilities, you must install the Bluetooth stick and then Bluetooth Monitor. BT can be activated using the FN + F8 key combination.

• How to install XP on Satellite L40 - 14N

  OK when I got this laptop for Christmas had installed vista
  I would install Xp
  Read only a few threads on here, but can't have it installed. I have read that I need a floppy drive. So went out and bought a USB floppy drive to the drivers.
  I thought I'd need on diskette.

  Now what happens is I press f6 for the SATA drive and press S when asked.
  It gives me a driver option so I say yes installs a bit more, then asked the driver again and I press on enter and nothing happens.

  Any help please?
  Read somewhere I can have to integrate but don't know how.

  Doug's soon

  Hello

  Floppy drive is not necessary only for the drivers but for Storage Manager. Please download and extract all the files there. Later, when the WXp is installed you can download all the drivers directly in Windows XP Home edition and start the installation.

  Please download Installations instructions document and install all the stuff following this order of installations.
  Good luck!

• It is a solution - how to install XP on Satellite L40

  NOTE: you will need a license for XP Pro SP2(it should work with Sp1 and Home, but runs better on Pro SP2)!

  First download and install nLite. http://www.nliteos.com/download.html (requires .NET Framework version 2.0, you can download .NET Framework from here: http://www.microsoft.com/downloads/details.aspx?FamilyID=0856eacb-4362-4b0d-8edd-aab15c5e04f5&DisplayLang=en)

  Now download and extract the slipstream drivers into a folder like C:\Drivers-temp\ http://files.soulpass.com/acer/slipstream_drivers.zip

  Insert your WinXP installation disc, exit the autorun if it appears.

  Start nLite, click Next on the start screen. Tell him where is your CD. It will ask you to tell him where to cache the files to. You can simply use a folder like C:\XP-temp\ for this.

  On the predefined settings screen, click Next again. Now click the button drivers, as well as the "Bootable ISO" button, then click on "next".

  On drivers screen, click Insert, and then several driver's record. NLite to the location where you extracted the drivers slipstream, such as C:\Drivers-temp\ and click OK.

  In the select several drivers to integrate the window you will need to highlight the path to the Summit (for example, C:\Drivers-temp\) by clicking on it once, and then click OK.

  In the window driver in Textmode integration Options integration options highlight the entire list by clicking once on the top element, then shift-click once on the background element. With this list still highlighted, click OK at the bottom.

  Back on the drivers screen, click Next. Apply it changes: dialog box should appear asking if you really want to start the process. Click Yes.

  Once the treatment is completed, you will need to click 'Next', how youâ ¢ will be taken to the final screen.

  On the "Bootable ISO" screen, change the menu of 'Create Image' to 'Burn Direct' drop-down 'Mode '. Eject your WinXP disc and insert a blank disk into your burner. For security reasons, place a check next to "check".

  Finally, click on burn.

  Congratulations, you now have an installation disc, suitable for any Toshiba laptop with S - ATA hdd (in fact you can use it on any pc/laptop with S - ATA hard drive).

  Now, you will need boot up your laptop on this disc. In order to be able to boot from the CD, we must first make a couple of quick changes in the BIOS of the laptop computers. In the BIOS, you will need to make sure that the first boot device is the DVD - RW drive.

  NOTE: Make sure you backup all your data before continuing, because the next step will erase everything.

  Restart the laptop with your new XP cd inserted, after it is started, the windows installer will ask you where you want to install Windows XP to: follow the prompts to delete all existing partitions, and then follow the prompts to create a new partition and install Windows XP to that. You can choose the "quick format" to speed things up.

  Follow the rest of the messages guides for windows in the usual manner.

  This solution was made to another mobile phone manufacturer but I just filled where it considers that Toshiba.
  http://soulpass.com/2007/11/10/installing-Windows-XP-Professional-SP2-on-Acer-Aspire-5315-2153-laptop/

  You will need the drivers for your system ready when XP complete installation, so be sure to download before starting all this and make a CD, you can use them again. Most chipsets Intel a driver for XP on Intels homepage.

  What about Atheros, then you can find the drivers here: http://www.atheros.cz/

  Many of the drivers of Toshiba Vista driver package runs on XP, just read the readme file or the inf file.

  If you have any questions then let me know.

  Concerning

  JBJ

  Hi Jan

  It looks very nice and useful s. I'll give you 10 Rewards points ;)
  I've seen lots of questions here on the procedure of installing XP on different laptops with controller SATA HDD.
  I assume that you can use this solution on several laptops that were equipped with SATA controllers.

  Best regards

• How to install XP in Satellite A300-1BI with Vista

  Hello

  A few days ago, I bought a Satellite A300-1BI with Windows Vista preinstalled. I don't like this OS and I want to degrade for Windows XP and also install my Ubuntu Linux distribution, but I cannot install lame of them because the hard disk appears as "not connected" on men to install XP and Ubuntu... It seems that the laptop is made ONLY for Vista and I think that it's... pathetic...

  Can someone help me? I tried to search for information on the web, forums, etc., but it seems I'm the only one with this problem.

  Thank you!

  Estemon sorry but I cannot believe that you wrote here. It's more poised to last a year and you can find so many threads here with the same question. In a minute I found, for example, what a http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=35787

  It's Satellite Pro, but the principle remains the same.
  Check it please satellite a category on this forum and you will find answer to your question.