Similar Questions

• Audio clips do not play back on the new devices from Apple and Android

  Hola,

  Successfully exported and load a video on youtube.  Unfortunately discovered audio excerpts do not play back on latest Android and Apple devices, but being of other clips.

  It doesn't seem to be any rhyme or reason.  a lot of audio tracks, but I only have a problem with the two voices.  and select clips on the two tracks do not play back - it's not all one and nothing on the other hand, some play, some don't.

  video and audio play fine on most devices and computers, but on a privileged few, these audio clips are missing.

  PP CS6, exported in h.264 mpeg file.  audio is uncompressed 16-bit.

  Help.

  Florian

  I don't know if it's kosher to answer your own questions.  Understood that after about 4 hours of troubleshooting...

  reduced to all THE AUDIO CAPTURED on a PARTICULAR DAY.

  in figures, this bad paired audio audio the other day who played back fine: wav 48 kHz, 16 bit,.

  found a thread (http://www.videomaker.com/forum/topic/audio-channelscancelling-each-other-out) that mentioned stereo audio where one side is out of step with each other, when read by a mono speaker (some apple and android devices, but not all) it will cancel out (can still be heard, soundtrack and effects).  When reading through the headphones or stereo speakers, you can tell that she is out of step.  Something trying to convert the stereo signal to mono cancelled the progressive audio funny.

  My dose was hard pan the audio tracks, solo, export only one mono aac audio, re - import the sound signal of a new track, and I settled for the mono voices above.

  hope this helps-

  -Yes, thank you-

  -your welcome

• Changed the display pad and how can I change this back to the first and last frame of the clip in question?

  Hi, when you cut a clip using the standard cursor (not the adjustment tool but just the mouse), the behavior that I was accustomed to is it shows the first and last frame of the clip you're carved, in a 2 - up window. Now in the updated 2015 I'm confused because it's still place 2 window, but instead I see the head or tail of any clip is next to any side of the clip, I'm trying to cut. I can see the utility in this, but I would like to know where I can go to the screen more as I'm used to it...

  Thank you!

  Click on the key in the timeline and in the drop-down the menu uncheck Composite overview over the filling.

  MtD

• How to play audio through the headphones and computer speakers, at the same time.

  Hey I just need to know how to play sounds through the headphones and speakers. Help

  Depends on your audio device.

  If its edge, while normally when you plug the headset switch will cut off the speakers.

  If you have a USB or Firewire pro device you can listen to your headphones as the signal played through your speakers.

  See you soon,.
  Jerry

• My cntrol of flight went I try toput it back in the taskbar and it says that I need to go to ad remove programs and install Sndvolcon32exe but its not how doi fixit

  My cntrol of flight went I try toput it back in the taskbar and it says that I need to go to ad remove programs and install Sndvolcon32exe but this is not how can I solve this

  Hello

  Follow the steps listed in the link below: Volume icon is not displayed in the notification area, and you may receive an error message when you try to add: http://support.microsoft.com/kb/319095

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• What should I do so that I can make a routine (monthly) BACK to the top without having to allow a program that is not properly validated?

  Since July of this year, when I try to back up my computer to HP Envy 17 laptop I get a pop-up window asking if I want to allow the following program to make changes to my computer.  The program is: Microsoft Windows Backup/Windows Hardware Driver verification / valid from 07/12/2009 to 03/07/2011.  Because the validation is obviously outdated, I consider the program run out of appropriate verification, but I can't back up my computer without the program.

  Hewlett-Packard said the problem probably occurs because the computer was missing an update of windows.  Updates happen automatically without my intervention.  I bought the new computer, directly from HP in the month of August, 2011 (after the date of validation of program pop up) with Windows 7 Ultimate installed and had no problem backup of my files to a CD until July of this year.  I believe that the problem may be the result of a rather than a missed update windows update.  What should I do so that I can make a routine (monthly) BACK to the top without having to allow a program that is not properly validated?

  Since July of this year, when I try to back up my computer to HP Envy 17 laptop I get a pop-up window asking if I want to allow the following program to make changes to my computer... [Posted Sept 27-12]

  At this point, the problem of slower Internet connection and loading is probably resolved.  I wanted to try the simpler remedy without doing unnecessary downloads.  Fortunately, there is a Windows update that created a restore point the day before the problem occurred.  I restored the system to this date, and the problem disappeared... [Posted 03 Oct-12]

  Sorry, but I can't say what the problem is (or was) or when he started - especially since the moderator community Smittychat [or another Mod?] decided to merge your two threads. Maybe it can help you?

  I can tell you that v11.3.300.268 Java Version 6 update 32 and Flash Player are very badly outdated & subject to thousands of security vulnerabilities .

  Get Java Version 7 Update 7 installed (or higher) & all previous versions (for example, v1.6.0_32) removed as soon as POSSIBLE!  Follow the instructions here-online http://aumha.net/viewtopic.php?f=26&t=46263

  When finished, remove your Java cache by http://www.java.com/en/download/help/plugin_cache.xml

  Download Flash Player v11.4.402.278 installed as soon as POSSIBLE, also!  See this page-online http://aumha.net/viewtopic.php?f=26&t=46252

  Good luck!

• When I look at my pictures on library it loads and it is super grainy, as my iso was too high, but when I look on developing it seems. What is happening and how I keep good fixed when I get back to the library and export?

  When I look at my pictures on library it loads and it is super grainy, as my iso was too high, but when I look on developing it seems. What is happening and how I keep good fixed when I get back to the library and export?

  Please see: photos look grainy on library but not on developing

  soft blurry images / when you view in the library but strong in develop mode? Lightroom forums

  Kind regards

  Mohit

• having an iphone 6.  The ringtone does not make a noise.   I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent

  I have an iphone 6.  The ringtone does not make a noise.   I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent

  Hello Jimmy10 66,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to follow your alerts, and I want to help you get your work again.

  Before we get too far, it's always a good idea to check that your 'secret' button just above your volume controls is not engaged. If you see that the yellow indicator go ahead and switch to the other position to turn it off.

  Alternatively, you can drag up from the bottom of the screen and make sure that the control of "do not disturb" is disabled.

  If those who are for the time off, go ahead and restart your phone and retest alerts. If the behaviour continues or if you encounter any problems, please reach out again and let the community know what other steps you have tried. The entire community is here to help.

  Best regards

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• Help his Mac Mini? Connected to monitor w / sound coming from monitor. I tried speaker external buffering in the back of the unit and still get only his monitor speakers.

  Help his Mac Mini? Connected to monitor w / sound coming from monitor. I tried speaker external buffering in the back of the unit and still get only his monitor speakers.

  How is the monitor connected?

  Are to connect the speakers to the headphone 3.5 mm? And not the line-in jack 3.5?

  If you go to System Preferences > sound > you can select the speakers/headphones output?

• want to make a sound move from left to right

  don't know if there is a function or I have to do it manually...

  I have a piece of his (kind of Chorus), who I want to come the song on the left side to slowly move it to the right and go back there...

  How to do?

  tried a few thing with the track of duplication and to work with the pan, but he can't get the way I like to

  Thank you!

  The pan automation curve track is that we have to move a sound from left to right and back.

  You have linked to set control points in the curve of pan automation command channel by clicking on the curve and then by sliding the control to the desired position points?

  

• Make sure that wire you all the inputs and outputs of your node library function call?

  This document says "make sure that wire you all the inputs and outputs of your node library function call.

  http://digital.NI.com/public.nsf/WebSearch/7253D2F0D91F68058625752F005AB672?OpenDocument&submitted&&...

  But all the terminals on the right side of the call library node considered "outputs" referred to in the foregoing statement?

  This same document continues to show the right way to allocate memory with this illustration and in the illustration, the right "outputs" are left without junctions.

  

  Am I right in assuming that the only terminals that count as outputs, those who use the code of the DLL (modify) as output?  If it is true, then all other terminals output associated with the values entered alone so don't really account as outputs, correct?

  In the parameter call-library configuration screen there is a "Constant" check box and the help that he wrote "indicates whether the parameter is a constant."  What is this box? for me in the setup of the DLL call

  Finally, assuming that a call from the DLL that is supposed to write in these five outputs, is it legitimate to use constants like this to book a space of memory for the output values?

  

  How about if local variables associated with the output terminals are used instead?

  

  Despite the linked document, it is necessary to connect the corresponding entry for simple scalar output parameters (for example a digital). LabVIEW automatically allocate memory for them. If you do not want the entries for all the output wire anyway, there should not be no difference between a constant and a local variable; I would use a constant to avoid useless local variables.

  For settings that are only entries, there is not need to connect the outlet side. It's a bit simplistic since all parameters are entered only and get one result (other than the return value), you pass a memory address and modify the content to this address, but LabVIEW manages this dereferencing pointer for you. If you want to really get into the details, learn more about pointers in C.

  The "Constant" check box acts as the qualifier "const" on a c function parameter. It tells the compiler that the function you are calling will not change this setting. If you call a function prototype includes a const parameter, then you must mark this as a constant parameter when you configure the call library function node. Otherwise, I wouldn't worry on this subject.

• HP Officejet Pro 8625: HP Officejet Pro 8625 impossible to change the order of printing back to the front and want to change

  HP Officejet Pro 8625 cannot change the order of printing back to the front and want to change

  The Officejet Pro 8600 driver has a 'Page order' option in the driver, and it is compatible with the Officejet Pro 8625.  You can install this driver in point 8.1 of Windows as follows: first download and install the driver Officejet Pro 8600 from HP here.  When the installer asks how the printer will be connected select "ignore the connection at the moment, I'll do it later."  After that go to printer and devices, right click on the Officejet Pro 8625, printer, advanced, pilot, new properties, then select a manufacturer HP (Hewlett-Packard) and select HP Officejet Pro 8600, next, done.  Click the Officejet Pro 8625 properties, general window and in the rear upper part called Officejet Pro 8625 (or what you want the printer named...), OK.  The Page order option will be available in the Advanced Printer Options tab.

  

  

• I made a music video in Flash and it won't play on the timeline, and I can't scroll through it either. He plays when I press Ctrl + Enter, but not in the timeline panel. It worked perfectly before, but now for some reason it doesn't. Help, please

  I made a music video in Flash and it won't play on the timeline, and I can't scroll through it either. He plays when I press Ctrl + Enter, but not in the timeline panel. It worked perfectly before, but now for some reason it doesn't. Help, please

  It is the nature of the movieclips. They play only when you make a film Test. If you want an animation that plays when you scrub the timeline, select the element and change it to be a chart instead. You can do this in the properties panel.

• Is it possible to comment "move to the back, behind the text and lines?

  Is it possible to comment "move to the back, behind the text and lines?

  I use Acrobat X Standard to 'highlight' lines to aid of comment lines 12pt width and opacity of 50% on DWG files converted to PDF.  The opacity setting makes it legible behind the highlighting of the text and the lines, but the colors do not print.  Move the highlight behind the text and existing lines would allow me to use 100% opacity with more vibrant colors.

  Before, we have highlighted by hand, but these colors do not scan or copy well.  Highlight scanning is cleaner and can be changed without restarting.  "Comment" lines can be applied by Acrobat Standard, Acrobat Pro, and Acrobat Reader, so there is an advantage.  Even more important is that the average size of a print 11 x 17 which is highlighted and scanned in color is 1000 KB, while doing it in this way, they tend to be 100-150 KB, and the text remains searchable. If there is that people are using another system, I'm open to that instead.  I did not look to do the highlighting in AutoCAD.

  Of course, everything I do is protected and cannot be shared, sorry.

  Thank you.

  Post edited by: Nathan Goldblatt

  No, this is not really an option.