How to make a manual backup, so I have redunant copying my files

Similar Questions

• How to perform a manual backup full with airport Time Capsule

  I want to switch to OS X Yosemite.  Before I do that, I want to perform a full manual backup of my system at the airport Time Capsule.  I was not able to find instructions on how to perform a manual backup by using the existing time Capsule.  Thank you.

  Dick C.

  Go to the Time Machine icon in the menu bar and click on NTI Backup Now

• How can you restore from backup if you have forgotten your encrypted password

  Restore your backup, if you have forgotten your encrypted password

  The idea is that you can not. See backups encrypted in iTunes - Apple Support about

  TT2

• Time Machine - how to make 2 independent backups

  Hello

  How to use Time Machine to make 2 backups?

  Finally I replace an old, embarrassing Ext. firewire Raid 1 car ("two-in-one')

  with 2 independent drives Ext., both connected via USB3.

  Time Machine will NOT work constantly - at the end of the working day that I use "NTI Backup Now".

  What I always have to manually switch the disks?

  Thank you.

  It must alternate drives to each backup. I can't find the reference online. It might be in the help file.

• How to make an ESXi backup on USB?

  I have a few servers ESXi 4.1 on USB keys. Now I wonder how can I save the config ESXi and USB itself, in which case the USB will be dead or damaged? One of the USB key on a single server is already showing the signs to go to rest forever, and I would like to have a backup of it. Is there a tool I can use to create a backup on another USB key?

  xcom1000 wrote:

  Thanks, I was looking for some kind of script. And the backup process itself is ok, but the restore configuration procedure needs to be alive and running of the ESXi host. So in case of emergency (USB key works do not), what would be the correct procedure to restore the server without hollow is a complete reinstallation of ESXi and reload the config with vicfg-cfgbackup?

  Well, everything depends on how many ESXi servers you have.

  If you have small env is not worth to spend a lot of time for preparation of extra super recovery too. I don't know anyone who supports up that ESX or ESXi breaks.

  For small env:

  1. PowerCLI script -you can create the script CLI power for each of your guests with specific parameters

  http://communities.VMware.com/community/VMTN/Server/vSphere/automationtools/PowerCLI

  Catering requirements:

  ESXi server must be running in - running

  restore procedure

  manual installation of ESXi (15 minutes), after installation, run a script (2 minutes) against the new server and DONE

  2. with the help of vMA

  Create a bash script that would back up ESXi firmware, set it on a weekly basis in crone (on the server of the vMA)

  Restore requirements

  ESXi server must be running

  ESXi must be on that same level as if it were before the construction accident

  restore procedure

  manual installation of ESXi (15 minutes), after installation restore a Firmware using the new server and DONE

  http://www.VMware.com/support/developer/VCLI/vcli41/doc/reference/vicfg-cfgbackup.html

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• How to make an application backup over the clouds

  Had an app go bad. How to retrieve only that one sauvegardΘ cloud pro iPad?

  You do not restore the iCloud apps, can re-download you them just on the App Store.

  Open App Store > updates > search or purchased for the app and it displays a cloud if you have already purchased the app.

• How to make a CD of the audo only of a wmv file

  I have copies of audio/video songs on WMV files, but I want to make an audio cd only

  Extract the audio of a video file is a process called 'file', so if you search on the web for demux WMV, you will probably get a lot of useful info. For example, the following thread looks interesting:

  http://Forum.videohelp.com/threads/245330-how-to-demux-WMV

• How to format a Dell Backup and Recovery DVD disc copy?

  In 2013, when I bought my Dell Inspiron 15R is 7520, it was preinstalled with the Windows 8.0 operating system. Using the Dell B & R software right now, I created 8.0 Windows system image in different regions in 3 DVDs.

  Since then I have had then improved to 8.0 Windows 8.1 and year last at 10.

  To avoid the loss of data in case of failure of equipment/system, I created the image of the system of Windows 10 in an external hard drive (WD Passport 1 TB).

  But other readings suggested that I also need to create a bootable in case system repair disc if Windows refused to load. That's why I wanted to format the disks from windows 8.0 image I created in the year 2013. However, the disks are write protected and I can't format it.

  Can someone tell me how to format disks that are protected from writing software Dell B & R?

  Thank you.

  If the media is DVD-R or + r, it is write - once.  You will need new discs to make a new recovery boot disc.

  If it's on DVD - RW or + RW, you can format the disks using Windows or another utility (Cyberlink, Nero, etc) and re-use the disks.

• How to make a dialog box for a user to choose a file to disk

  Hello

  Is it possible to make a dialog box for a user of photoshop, choose a txt, process of my javascript file?

  I have a txt file with all the names and locations of the psd files, I want to treat by photoshop. I have e.g. 100 out of a folder with 250 images.

  If anyone has a shot "sample code" how to select a file - I will be happy.

  / T

  Here is an example of selection of a text file...

  var dlg=
  "dialog{text:'Script Interface',bounds:[100,100,500,220],"+
  "testFile:EditText{bounds:[10,40,310,60] , text:'' ,properties:{multiline:false,noecho:false,readonly:false}},"+
  "Browse:Button{bounds:[320,40,390,61] , text:'<<' },"+
  "statictext0:StaticText{bounds:[10,10,240,27] , text:'Please select Text File' ,properties:{scrolling:undefined,multiline:undefined}},"+
  "Process:Button{bounds:[10,80,190,101] , text:'Process' },"+
  "button2:Button{bounds:[210,80,390,101] , text:'Cancel' }};"
  var win = new Window(dlg,'test');
  win.center();
  win.testFile.enabled=false;
  win.Browse.onClick = function() {
   selectedFile = File.openDialog("Please select TEXT file.","TEXT File:*.txt");
    if(selectedFile != null) win.testFile.text =  decodeURI(selectedFile.fsName);
  }
  win.Process.onClick = function() {
   if(win.testFile.text == '') {
    alert("No text file has been selected!");
    return;
    }
   win.close(1);
   selectedFile.execute();
  }
  win.show();
  

• BlackBerry software how to make link to display ONLY those syc'd with device files

  With the help of Windows 8

  When I opened the link, it shows ALL the files/folders in My Documents. Since I use this system for travellers and staff I don't want all OTHER folders than sync'd with the Z10 to display.

  How can I do this?

  Thank you

  VIC

  Hello vgbaron,

  Thank you for your question. When you have BlackBerry link open and your computer selected, you can see the music, images and videos, as well as the Documents listed. Click on one of them and you will be given a list of folders that are synchronized. On one of the folders, you can right-click and choose the options delete which will remove the folder appears.

  I hope this helps. Let us know if you have any other questions.

• How to make a Vista installation CD (I have a product key)

  I have a Gateway laptop with Windows Vista Home Premium OEM Act.  It did not come with installation disks and my hard drive failed recently and I had it replaced.

  I have the product key but am completely lost in how I can access installation CD.

  Thanks in advance for your help.

  Laura

  The product key you have, Laura... for the OS that was on the hard disk that failed.

  And, you do more, right?

  It's what they call OEM operating system... this product key goes hand in hand with THIS hard drive, nothing else.

  The Setup is, in addition, on this hard disk.

  Usable ONLY for this hard-drive/computer.

  It's in a RECOVERY partition on this hard disk, and you no longer have this hard drive, right?

  You can buy another CD of Installation of operating system.

• How to make windows Picture Manager program by default to open jpeg files and how do I email photos smaller, so they don't take so much space?

  When I try to open a jpeg file, I get an error message... Acrobat Reader cannot open file... so I have to right click on each photo and open with Windows Picture Manager.  I want to be able to open a JPEG with a single click.  Also, I want to be able to send smaller photos so that they are sent faster and do not require a lot of time the receiving computer to get... Thank you.

  I'm guessing that the regfix didn't work?

  Outlook or Outlook Express? In any case... when
  attaching directly to an e-mail message, do you
  don't see no dialog resize.

  The following free PowerToy for Windows XP
  can resize batches of photos very quickly:

  Click on the following link and the left click of the
  Tab "PowerToys"...

  Windows XP downloads
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download and install: ImageResizer.exe
  (Filename: ImageResizerPowertoySetup.exe)
  (does not work on Vista)

  Then, you can open any folder containing
  images and you will have an option to resize.
  Just right click the selected image files and
  Choose resize images in the menu. You
  can select a picture or an entire group.

  The program will place the resized in copies
  the folder with your originals.
  (Tip: * never * overwrite your originals)

  To ensure that images in both portrait and
  landscape orientation are resized to the
  same dimensions... go to... Advanced...
  and enter the largest number in these two areas.
  IOW... for 600 x 800... Enter 800 in these two areas.

• Manual backup Parallels virtual machine - how to exclude folders?

  Can't find an answer.

  I want to exclude certain folders when you do a manual Virtual Machine backup Parallels.

  There are thousands of responses but all backups on Mr. time.

  And since I had a crash when restoring a virtual of TM machine I won't use.

  I have no problem with manual backups.

  But since my photo file is about 100 GB and I don't change anything

  often, in this case, I want to exclude from the backup of file that records everything.

  Greateful for any suspicion.

  Can you clarify, you try to back up only via Parallels

  or try you backup via Time Machine and want to exclude a folder?

  If this last, go preferences of Time Machine and choose your folders to exclude

  

  If you only back up Parallels see here

  http://KB.parallels.com/en/4859

  or here

  http://KB.parallels.com/en/8827

  - - - -

  Your mileage may vary.   All advice is based on my experience.   I bought a shareware/commercial software in any given notice and have no financial interest in all of the mentioned products.

• All my files on my desktop disappeared. How to make a comeback?

  All my files on my desktop disappeared. How to make a comeback?

  All my picttures and all files are gone?

  Hello

  you give enough information on anything to do with your calculation or you have recently done for the people of help

  read this

  How to ask a question

  http://support.Microsoft.com/kb/555375

  -What you trying to do?
  -Why are you trying to do?
  -Do you try already, why and what was the outcome of your actions?
  -What was the exact error message you received?
  -How long have you been experiencing this problem?
  -Have you searched the relevant forum/newsgroup archives?
  -Have you tried all the tools or KB articles or other resources?
  -Have you recently installed or uninstalled any hardware or software?
  -What changes have been made to the system between the time where everything has worked, and when you noticed the problem?

  _______________________________________________________

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________

  read the information at the bottom of the below link to the subject of some malware that hide your data files and the cure for it regarding

  Read article 17

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

• How to make a Windows 7 boot disk?

  I am upgrade Vista Ultimate 32 bit to Windows 7 Pro.  I bought the option to download only from the Microsoft Web site.  (Should have at Staples.) I thought that I would have the opportunity during the initial configuration to select a 64-bit installation.  But none.  Instead, I have to boot from the Windows 7 disk - WHICH I don't HAVE, just the installation files themselves.  I can't install anything until I fix this.

  How to make a boot disk?  (I have no floppy drive, btw.)

  Create DVD installation or key USB from Windows 7 download

  According to what you have downloaded (ISO or .box) and what you have available, you can use one of the links below to create bootable media. Use the methods of USB flash drive, your flash drive must be 4 GB or more and the computer must be able to boot from USB. You could also buy the installation DVD if you wish.

  DVD from ISO - if you downloaded the ISO file use a burning program to a DVD. You can also use the USB/DVD Windows 7 download tool allows you to create a copy of your ISO of Windows 7 file on a flash drive, DVD or USB.
  http://store.Microsoft.com/help/ISO-tool
  http://pcsupport.about.com/od/toolsofthetrade/HT/burnisofile.htm

  DVD from files .box - if you downloaded the. EXE &. Box follow these instructions to make a bootable from download Windows 7 DVD:
  http://www.TomsHardware.com/Forum/1392-63-Windows-upgrade-bootable-guide-having-issues

  USB Flash ISO - if you downloaded the ISO file and you want to install Windows 7 using a flash drive:
  Windows 7 USB/DVD Download tool allows you to create a copy of your ISO of Windows 7 file on a Flash DRIVE or a DVD. To create a bootable DVD or USB flash drive, download the ISO file and then run the Windows 7 USB/DVD Download tool. Once this is done, you can install Windows 7 directly from the Flash DRIVE or a DVD.
  http://store.Microsoft.com/help/ISO-tool

  USB stick installation files - WinToFlash is a practical application that will help you transfer your Windows 7 installation from a hard drive or DVD to USB flash in a few steps. That you can install Windows 7 from a flash card, USB stick, HDD, etc to your computer or netbook. If you have downloaded the .box file extract everything first. If you have a 4 GB or more large USB key (or external hard drive), and the computer can boot from USB:
  http://www.Softpedia.com/get/system/system-miscellaneous/WinToFlash.shtml

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses