How to read a dvd

Similar Questions

• I need to know how to read my DVDs on quick time with an extension xvid.avi

  I need to know how to read my DVDs on quick time with an extension xvid.avi

  You have not because QuickTime Player does not support the xvid .avi formats or dvi. You can download the free VLC media player and she plays very well this .avi.

• HP20-2000: how to read a dvd

  cannot read a dvd, either, not least dvd in computer hear a humming noise, wait for the message to find what you want to do with this camera, a few weeks later I'm still waiting. as new computers about 15 months you would think that I would like to know something to try, not if the 1st series of 2000 I had made me bad, yes put error, most of the time, but when she died after 10 months and I was told that a partition has been absent explained perhaps it wasn't all my lack of skills. He was replaced by another set of 2000 in respect of the extended warranty, and with the last 2 months he turned out to be as slow as the first, had a few hiccups, but how can it be so difficult to put a dvd in to play or is the dreaded partition up to his tricks.

  All joking aside could some alwyn7 one help, he needs.

  have tried suggestions again, got on microsoft fixit, clicked on the problems of cd/dvd, traveled to green up coming this, convenience store lines does not apply to your system? then another don't attempt on fixit troublshooter no problem detected there for not applied hotfixes?. DVD well inserted again and something has changed much whirring little upward on tab to the right of the screen that you want to do, so busy 2 games work thank you very much for your help.

• Satellite M45-s265: how to read a DVD without having to start?

  I have a M45-s265 and it says it will play a dvd without boot. How can I enter this mode?

  [Edited by: admin on 5 February 06 17:15]

  Hello

  Press the button with the disk image.

• How to read a dvd on computer and watch on TV

  play a dvd on computer and watch on TV

  I have an acer 5630 with vista. I bought the male vga cable and I have windows media player, but can't get film on television.what I have to do?

  I have an acer 5630 with vista. I bought the male vga cable and I have windows media player, but can't get film on television.what I have to do?

  ==============================
  FWIW... Will not support Audio VGA... you will need
  an additional cable.

  Perhaps the following links will propose a few ideas:

  How to connect my computer to a TV
  http://hookpctotv.com/

  What follows is a site selling retail who sells cables but
  There are also a few Pnrtie.

  S - VIDEO - PC to TV connection Guide
  http://www.SVIDEO.com/pctvcables.html

  Windows Vista - connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  Windows Vista - HDTV: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to read a dvd recorded in windows 8

  I bought a computer laptop sony vaio preloaded with windows 8, and I'm not able to play dvd movies in windows 8. y at - it an upgrade of Microsoft's free software available to play saved dvd movies

  In Windows 8, Microsoft has removed the Media Player DVD playback. If you have WIndows 8 Pro, to play DVDs, you need to install the add-on library, which costs extra, but the aqdd - it is currently available for free.

  http://Windows.Microsoft.com/en-us/Windows-8/feature-packs

  In addition, a third-party DVD player must be installed.

• Why windows media player is not reading my DVD, and how do I install windows media player decoder using my drive from windows XP Professional?

  Media player from Windows

  Why windows media player is not reading my DVD, and how do I install the windows media player decoder using my disk of windows XP Professional

  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder. And... He
  is not a DVD decoder on your Win XP Pro drive.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following freeware
  media players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Or... you can try to download and install one of the
  Following codec packs.

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates).

  * Proceed at your own risk *.

  (1) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Windows 2000 / XP / 2003 / Vista / Windows7 / XP64 / Vista64 / Windows7 64)

  (2) information on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (XP SP1 or more, Vista, Windows 7 - 32 bit - 64 bit)

  (3) Windows 7 Codec Pack
  http://download.CNET.com/Windows-7-Codec-Pack/3000-13632_4-10965840.html
  (2000/XP/2003/Vista/Server 2008 / 7)

  (4) Media Player Codec Pack
  http://www.mediaplayercodecpack.com/
  (Windows XP - Vista - 7)

  Good luck...

• Re: My driver TEAC DV-w28ECT used to read DVD and CD now it reads only DVDs

  My TEAC DV-w28ECT driver used to read DVDs and CDs, now, he reads only DVDs. What's happened and how can I solve this problem? I have Windows Vista

  Try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

• Satellite A40-231: SD-R6112 will not read the DVDs I burned

  I finally got my DVD burner to work, but now the drive will not read the DVDs I burned, which, of course, defies the point of having a dvd burner in the first place... When I insert my dvd recently burned, "working" light lights and stays on. Same thing happens no matter how many times I take it out and put plug back in, restart my computer, etc... any ideas anyone?

  Hello

  @Magnus:
  Sometimes, CDs and burned DVD cannot be read with no closing sessions of engraving. You should check this option.
  In addition, this burning program did you use?
  I use Nero. Form is the program better combustion and I never had a problem.
  What you need to do is to test several DVDs. not all media work on the disc.

• How to make a dvd using windows movie maker

  How to create a dvd with movie maker. film downloaded from camara tried to create a dvd, but it won't let me it will only do CD that I can't read on my computer or dvd player

  The only version of XP WIndows Movie Maker who has
  a DVD option is WIndows XP Media Center Edition 2005.

  You need DVD creation software to create a DVD-video...
  the following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• How to finalize my dvd + r that was burned with a non-divx file to be compatible with my magnavox dvd player? Windows XP DVD + R finalized Dixv?

  I burned a DVD + R with success with a NON-DIVX FILE and the dvd was... Unfortunately not compatible with my dvd player Magnavox... I need to know HOW DO I FINALIZE MY DVD VIA MY COMPUTER? (WINDOWS XP)? Help, please

  What software did you use to create the DVD?

  You need DVD creation software to create a video DVD
  that will be compatible with a free-standing DVD player.

  Perhaps the following freeware will help you get started:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Cannot read CDs/DVDs, get the error "file does not have a program associated with it for this task" under XP

  Cannot read a cd or dvd to print

  Hi WayneMarkland,

  ·         What happens when you try to play an audio CD?

  ·         How do you print DVDs?

  ·         When exactly do you get the error message?

  I suggest trying the Microsoft Fixit and/or manual steps from the following links and check if it helps:

  Diagnose and repair Windows files and folders problems automatically

  You receive an error message when you try to start a program that has the an.exe file name extension

  How to change or choose the program that starts when you double-click a file in Windows XP

  I hope this helps.

• How to rip a dvd that I made to what happens on my count and is stored in memory

  I have made a dvd and tried to tear in my system if I could save it on my computer (vista). I don't know how to do or even know if it's possible can help you. The dvd is of my daughter to school game.

  Two methods you could try...

  (1) download and install the freeware VLC
  Media Player.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Create a new folder on your hard drive and
  name the same as the DVD.

  Insert the DVD into your DVD drive and close
  all the windows that can launch. Reach... Start /.
  Computer... and right, click the drive letter
  the DVD drive is on and choose open or
  Explore. This will display the directory of the
  DVD.

  Then copy the VIDEO_TS folder of the
  DVD to the folder that you created.

  (right click / copy... right click / Paste)

  To read the DVD... right click on the folder you
  created and the menu,... Choose... Play
  with the VLC Player.

  (2) using the free software Format Factory... you
  can download and convert the video DVD
  a format like WMV, so you can play with
  most any multimedia player... and correct it in film
  Maker.

  * Be aware that the breaking of the protection against copying
  on commercial DVDs is illegal *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup280.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup280.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Insert your DVD into your DVD drive.

  In the left column of Format Factory... go to...
  "ROMA Device\DVD\CD\ISO" / DVD to the video file...

  Open the DVD menu and select the drive
  the DVD is in. The files of the DVD should appear
  in the setting of the output window. Select (check) the
  main feature for the conversion (the one with the longest
  duration will be the actual film)

  Choose the WMV format and the left click the
  Convert button. Back on the main screen, left click
  the Start button.

  Now, all you have to do is wait. It is best if you do not have
  multitasking while video is rendered.

  That's all... Format Factory has many settings
  You can set but this should be enough to help you
  has started.

• Need help to install vista on a pc that can not read the DVD

  OK so my pc with vista family venus premium pre installed and somewhere along the line of my dvd read Hothead on my drive so now it only reads CD... ok here is my question how to install vista Home premium without being able to read my dvd system... I can burn and read cds... What can I do? any help greatly appreciated, thanks in advance

  * original title - HELP, need help to install vista on a pc that can not read dvds(i have a legitimate vista key) *.

  # Preinstalled Versions of Windows Vista are OEM versions.  It cannot perform an upgrade from Windows XP.  In addition, you can modify or reverse engineer OEM manufacturer of computers version of Windows Vista... it will never activate. Carey Frisch

• Learn how to play a DVD and use a DVD I don't have Windows 7

  I have Windows Vista not Windows 7. I don't know where to go to read a DVD, or how to burn a. I pull my menu and then off. I got the Documents, network or what.

  Hi JoycieD,

  This article shows how to play DVDs in Media Player(search 'windows media player' in the start menu): http://www.microsoft.com/windows/windowsmedia/knowledgecenter/howto/mp11/playcd_dvd.aspx

  This article shows a way to burn DVDs: http://www.ehow.com/how_2295052_burn-dvd-vista.html