LaserJet 1320nw: if HP printer is installed, can't print to a PictBridge compatible printer. Crashes all apps-10 Windows

Similar Questions

• Problem installing the FAUCET adapter by program - there is place for all versions of Windows 32 & 64-bit.

  Hello

  Since my c# application, I install faucet adapter. He moved but several times. As in 32-bit systems, he asks "... Certified logo". "with 2 buttons"Continue anyway"and"Stop"anyway. If you press once btn still "continue...". ", he asks the same question until you press"stop anyway. " How many times have clicked you on "continue...". ", the card several times. As if you clicked the button "continue...". "4 times, 4 cards are installed on the system. For 32 bit, I have tested with XP Pro SP3 and Windows 7 (its ' not Home edition).

  In the 64-bit system, it is little differently. He asks if you want to install Y/N. You click Yes and it installs 2 times and the chapter is finished. It will not ask another time or two, but only once it will install 2 adapters. For 64-bit, I tested it with Vista Ultimate SP1.

  Why is this strange behavior? Everyone knows the same? Is all the parameters or more required for windows to stop acting like that?

  Any help is appreciated.

  * Knowing that it is not a question of pure development asked the question to the Windows network. Here, the representative asked to in c# general forum. So I added here. From there on, the representative asked to post in Forum Windows for an effective response. I added here. Hope to here will get a response and expert representatives and help me find out and solve the problem.

  Hi truptivd,

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

  http://social.msdn.Microsoft.com/forums/en/category/visualcsharp/

  Hope the helps of information.

• Why can't I verify my ink level Deskjet F4140 All in One Windows 7

  The printer no longer asked when the ink level is low and I can't find the tab to check for this.  It seems that he's gone since I changed to Windows 7.   Please notify

  Hi Tony,.

  If you open the HP folder under all programs, you will find "IP address update' located in the HP Deskjet 3070 folder. Type the 192.168.0.2 in the box, and then click Search to update the software for the correct IP address of the printer. This should solve the problem with the inability to communicate error you receive, and you should also be able to verify the printer ink levels by clicking on the icon of the printer on your desktop.

  

• I recently installed Firefox 10 but it is not compatible with some application that I have to work. I need to get back to 9 Firefox. Where can I find to download? in English

  I recently installed Firefox 10 but it is not compatible with a client app, that I have to work. I need to get back to 9 Firefox. Where can I find to download?
  I'm working on a laptop Packard Bell with XP.
  Thank you.

  [email protected]

  Hey wordsontime,

  There are many benefits to the latest version of Firefox. You may want to consider the old version running on a USB key with PortableApps. This way you will always be able to run the latest version for your daily activities.

  If you want to roll back to a previous version of Firefox, just take a glance section of the Knowledge Base install an older version of Firefox.

  Hope this helps!

• HP LaserJet M4345 MFP: Network printer problem: cannot print, but can ping

  Good evening

  I have a big problem. We have a network HP LaserJet M4345 MFP printer. It is connected to a switch and the switch is connected to a Modem of Telmex.  It has a static IP address. 5 computers to connect to this printer, but I'm going to use one as a sample.

  The problem is that I can't print anything.

  • I can install the printer in all computers
  • I ping the printer
  • I can access the printer configuration using a browser
  • I can even scan a document

  But I can still print the test page. We have a static IP and it does not repeat the IP address, the host name is unique and date everything is fine. I tried to ping to test for the default gateway and it a ping with a correct response time.  So:

  • The configuration of the printer can be accesed via browser
  • The computer can ping the printer
  • I can scan a document to the PC
  • The printer installs very quickly in all machines
  • The printer can ping the default gateway
  • The IP address and the host name are unique

  What could be the problem? I tried to print in all the machines without success.

  Thank you for your attention.

  It is possible that the network adapter has a problem but since it's your only work around would be to buy a direct jet EIO card and put in the EIO slot in the back near where the network cable is plugged.  They are fairly cheap on ebay and you want to buy a 610N, 615N or 620N one of these models will work.  You must assign an ip address that is different from the one assigned to the integrated card.  I think that there is a way to disable the built in network card, but I have to carry out additional research on that.  If you have an old hp printer that you do not use with a network card eio, even if older 600N it will work in this printer.

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• How to install an hp LaserJet 1010 printer using the format of Windows 7?

  How to install an hp LaserJet 1010 printer using the format of Windows 7?

  Hello

   
  The hp LaserJet 1010 printer is not compatible with Windows 7. Visit the following links of Microsoft and hp for more information on this.
   
  Microsoft link
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-GB/search.aspx?type=hardware&s=HP%20LaserJet%201010%20&sort=ProductNameAsc&l=en-us
   
  link HP
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=306507&lang=en&cc=us&prodTypeId=18972&prodSeriesId=306505&TaskID=135
   
  To work around the problem, you can try the following steps, however this may or may not help solve the problem.
   
  Install the drivers for HP 3050 and check. Follow the steps mentioned.
  a.Go devices and printers.
  b. Add a printer.

  c. Add a local printer
  d. use an existing port - for example DOT4 001
  e. choose HP 3050's driver in the list and install it.

• How can I print my Microsoft Surface running Windows 8 RT?

  How can I print my Microsoft Surface running Windows 8 RT?

  Most new wireless printers have an impression of the Microsoft Surface with Windows 8 RT problem.  Everything you need to make these printers is tell them to print and they will.  Older wireless, Ethernet and USB printers should not have driver officially supported in Windows 8 RT, but there is a way to get the printer working.  There are different requirements depending on how the printer is connected to the Surface.

  Note: All the steps below are only for other HP ink Jet, DeskJet, PhotoSmart and OfficeJet printers.  These steps are not for Laserjet printers or printers from other manufacturers.  These steps may not work for all inkjet printers.  If these steps do not work, try different drivers in the list until you find the one that works (you'll understand what I mean once you follow the steps below).  If none of the drivers work, your printer does not work with the Surface.

  For (Ethernet or wireless) network printers, all you need is Surface keyboard or a USB keyboard to connect to the Surface.  It is simply what you have to type more easy to type.  You will also need to have the Surface and the printer connected to the same network.

  1. From the right edge, drag your finger to the left on the screen Surface to appear charms bar.
  2. Press search.
  3. Under the search box, tap Settings.
  4. In the search box, type devices and printers.
  5. Press devices and printers.
  6. Contact add a printer.
  7. Tap "my printer is not listed.
  8. Select the TCP/IP option and then press Next.
  9. Enter the IP address of the printer and press Next.  Note: You can get this from the network printer, or list DHCP in your router Configuration Page.
  10. The Surface will locate the printer and try to install it.  Installation fails, and the Surface will be asked what you want to do, look on the internet for the driver, or manually install the driver.  Choose to install the driver yourself.
  11. Press 'I want to choose from a list of drivers.
  12. If no driver is in the list, make sure that the box next to 'Show compatible drivers' is not checked.
  13. Choose HP in the production list.
  14. Choose driver DeskJet PCL 3 class in the list of drivers.  If this driver does not work, try using the Photosmart PCL3 driver, or the driver Officejet PCL 3.  (Thanks JonW for letting me know about these other alternates.) )
  15. Press Next.
  16. Tap Finish.
  17. Test print.

  For USB connected printers, need you a USB cable to connect the printer to the computer.

  1. Connect the printer to the computer via USB.
  2. Windows will try to find the drivers but will not be able to.
  3. Here Windows may ask you if you want to choose the driver to install.  If she go to step 14 below.
  4. From the right edge, drag your finger to the left on the screen Surface to appear charms bar.
  5. Press search.
  6. Under the search box, tap Settings.
  7. In the search box, type Device Manager.
  8. Press Device Manager.
  9. Tap view and select Show Hidden.
  10. Search for the printer in Device Manager.  It should be in the other devices section with a yellow warning next to her sign.
  11. Select the printer in the list.
  12. Press Action.
  13. Update driver to touch or to install any what it displays.
  14. The Surface will ask you what you want to do, look on the internet for the driver, or manually install the driver.  Choose to install the driver yourself.
  15. Press 'I want to choose from a list of drivers.
  16. If no driver is in the list, make sure that the box next to 'Show compatible drivers' is not checked.
  17. Choose HP in the production list.
  18. Choose driver DeskJet PCL 3 class in the list of drivers.  If this driver does not work, try using the Photosmart PCL3 driver, or the driver Officejet PCL 3.  (Thanks JonW for letting me know about these other alternates.)  )
  19. Press Next.
  20. Tap Finish.
  21. Test print.

  I hope this helps.

• Problem with printer Laserjet 4 M Plus printer

  I have a Laserjet 4 M Plus printer which I had connected directly to my office with Windows 98.  The printer worked fine with the office.  Well, I've upgraded the desktop of Windows XP and now I can't the printer to print at all. The printer has been added to the desktop, but it will not print a page to test the computer or any program at all.  Your help is greatly appreciated in getting my printer works with XP.  Thank you!

  Message edited by cvanderhoef on 12/21/2008 13:28

  Let this step by step, as we do for the 1st time

  1. set up your printer (cords & cables)

  2. turn off the computer

  3. connect the parallel cable or usb

  4 turn on the computer

  5. turn on the printer

  6. place the disc in

  or install from windows printers list

  Download of HP or

  7. open the folder "default" printer

  8. check the cable port

  example: printer properties

  tab select "Ports".

  9 look for ports using its

  the ports are: "the LPT1 printer Port:

  "USB: printer name?

  Make sure that the port is checked in the box of

  10. click on the "General" tab > "printing preferences...". »

  11. Select "advance" tab tick to set lower resolution

  that i had this problem on one of my printer

  because the high resolution would never print

  12 OK and test print the printer if successful

  13. click OK final

  14 perform the normal functioning of every day as everyday u

  15. good luck

  Message edited by rickp400 on 06/01/2009 12:49 AM

• HP Laserjet CM1415fnw does not print wireless

  Original title: HP Laserjet CM1415fnw

  My printer has stopped printing wirelessly from my PC (but prints OK when connected with a CAT5 cable). My PC is connected to the router (BTHomeHub) wireless, I can browse and enter in the config. My printer says it is connected to the router with the identifier SSID is correct and past Network Test Wireless HP on all points. I got the impression of having a fixed IP address in case it was a DHCP problem and a static IP address reservation in the router. However, in the router settings advanced, the router says the printer is not connected and I cannot ping the router from my PC. It was working fine until recently. Any ideas? THX.

  Hey Kevin,

  What version of the windows operating system is installed on your computer?

  Refer to the steps in the following article and check if it helps.

  HP Print and Scan Doctor

  Printer HP LaserJet Pro CM1415fnw color multifunction - software installation of the product on Windows for a network connection Wireless (via an Access Point)

  Printer in Windows problems

  Keep us updated on the status of the issue.

• LaserJet Pro M402n: Cannot print on LaserJet Pro M402n on port TCP/IP for Windows 10

  I'll put up a new workstation Windows 10. It is brand new with all updates applied. The printer gives me fits. I tried to install as myself (with administrator privileges), 'run as administrator' and logged in as a local administrator and I got the same results each time. I used 'install' and 'non-installateur' version of the most recent drivers.

  The printer is a HP LaserJet Pro M402n. I'm installing a Standard TCP/IP Port. I can ping the printer. I can get on the printers web interface. Likewise, the installation program detects the printer and gives no error. But when the installation is complete, and I try to print a test page, nothing happens.

  The same printer is configured the same on my old Windows 7 workstation which is still on my desktop and connected by the same switch and on the same subnet as the new work center. It prints very well.

  Any ideas to get this to work?

  Got, it works. It had to be that something gimped upward in the initial installation of Windows. I've reconfigured on the PC and was able to get the printer to work first time.

• LaserJet CP1215: Color CP1215 print quality - Windows 8.1

  Systematically print very dark colors.  I printed from Word, Adobe PDF viewer and Photoshop all with the same results.   I installed new cartridges and have installed the latest driver.  Since there is no available since Windows 8.1 Toolbox - have not found any way to print the configuration page - hold the results just RESUME button in the gree light of power is flashing but nothing prints.  It seems not to be possible to print a cleaning page.  I'm at a loss what to try to fix this.

  I have downloaded and run the HP print and Scan Doctor 4.6 and everything out OK, the test print that comes out seems OK for me but I don't know what it is supposed to look like.  The cyan block seems a little light.

  Hi dsouleles,

  I see that you have problems with the dark printing. I'd love to help you.

  You can adjust the brightness in the application you are printing from, if this isn't a problem with the hardware with the printer.

  You use windows built in driver or did you download the Plug-and-Play drivers?

  HP Color LaserJet Plug-and-Play package.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Solving print quality problems. Go to eight Solution: print a configuration page. Is it printed correctly then it would be software related. Let me know the results and how to print the configuration page. Please go well the steps contained in the document. Unfortunately, you'll skip the steps of the box tool.

  If the problem is still related software, you can continue with the following steps:

  Make sure that the correct paper type is selected in the print driver and he is not in default to unspecified.

  Here is a document for the different features in the print driver. Use features in the Windows printer driver.

  What kind of paper do you use?

  Print and Scan doctor, you may have the option in the upper part, in one of the menus to run a diagnostic test, possibly cleaning and calibration of the printer. Try printing Scan Doctor for Windows and HP. Under how to use diagnostic and printer cleaning services?

  Have a great day!
  Thank you.

• Printer HP LaserJet CM1415fnw range: my printer HP LaserJet CM1415fnw keeps restarting when connected to my ethernet router.

  I bought my printer HP Laserjet CM1415fnw color in 2013 (don't remember the exact date). The CM1415fnw printer is plugged into its own outlet and is related to a router NETGEAR Nighthawk for 2 years. My network and computers have not changed in the last 3 years.

  A month ago, July 2015, the printer started reboot itself on every few minutes.

  These are the things I've tried:

  1. I turned off the printer for several minutes through the turning off the switch on the side of the printer. This didn't solve my problem of restart.

  2. I turned off the printer during all night through the turning off the switch on the side of the printer. This didn't solve my problem of restart.

  3. I disconnected the printer from the outlet for several minutes and all night. printer. This didn't solve my problem of restart.

  4. I disabled the "WS-Discovery" setting to printer without success. He continued to restart.

  5. I turned off the printer and the nomad ethernet cable and cable telephone line of the printer. I then turned it on. He

  slept for hours without having to reboot. I plugged the ethernet cable and it continued to remain without restarting the computer for more than an hour. I then plugged the phone line cable and less than a minute the start printer restart again. I unplugged the cable line phone again and the printer stopped restarts. My wife and I have been printing happily.

  Solve the problem! NO! Last week, on July 27, 2015, the printer started reboot again. I went through the same steps as above, except that this time, whenever plugged in the ethernet cable, to the breast and a few minutes the printer would begin its restart. Some time between reboots there would be upward of long enough for a print job.

  Other things I've tried:

  1. I connected the printer directly to my computer workstation via USB and plugged the phone line cable. This great for hours of work. I could print jobs. No reboot. It is simply not the solution only when necessary. I need a network printer.

  2. I connected the printer directly to the ethernet port on my laptop with connected phone cable. It worked also. So, in this configuration, I took the opportunity to update the Firmware to date 20120216 to the 20140616.

  3. I reconnected it the printer to my router and the printer began to restart again in a few minutes.

  I noticed that between reboots, with the cable connected telephone line, anytime a phone rang in the printer immediately rebooted.

  I have mulitple home devices that rely on network connectivity to this printer. Statement of objections, now this printer is in offline mode to

  everyone. I need to get this problem resolved as soon as POSSIBLE.  I have a temporary work around the point #6. But I need a real solution. Can someone please.

  My Configuration:

  HP LaserJet CM1415fnw

  Number of trainer: QD51YOP
  Serial number: CNH8C9KRHB
  Service ID: 21334
  FIrmware Datecode: 20140616
  Telcom Version: 04/15/01
  Controller number: 4

  I want to thank you davidzuts and muj851 for your quick response and your help in this issue.

  I'll give you the short history of my troubleshooting efforts and solution.

  I was able to isolate restarting the printer to the computer of my wife which found in another part of the House. Anytime that I connected to his computer the printer network would start to restart within one minute. I then uninstalled all HP printer software. I reconnected it then his computer to the network. Less than a minute, the printer is entered in restart mode. After a few install and uninstall drivers HP printer soffware and I took notice that the device to print to my printer still appeared after you have uninstalled the software and drivers. I clicked on the printing device and deleted manually. After restarting the computer in a few minutes, that there was a system message stating that the device driver is to be installed.

  Reinstall the drivers and the printer software to create a new instance of the CM1415FNW all-in. Uninstalling all deleted, but Moose printing device. Connected to the network caused the printer restart. Thus, looked at the queue of the printer and found that it was a document in the queue to be printed. The status of the printer showed that the document was ready for printing, but would restart the printer and the State would appear as a printing ERROR.

  I cancelled the print job and the document in the queue has been removed. I then removed the printing device. When I connected my wife for the network printer computer do not restart. I have software HP printer for printer CM1415FNW reinstatlled and everything is working very well for the last two days.

  A conversation with my wife discovered that the day where all the problems with the printer started she tried to print a Barnes and noble discount coupon. Something with formatting printer or N & B coupon codes caused the printer restart.

  The next time this happens, I know to check the print queue.

• I have two printers. One of them: hp Laserjet P1505n just stop printing. the other is fine. Windows 7. Please notify

  I have two printers. One of them: hp Laserjet P1505n just stop printing. the other is fine. Windows 7. Please notify. Thank you.

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Re - install the software for the printer C6280 all in one... get a "file not found" error message

  you need to reinstall the software for the printer c6280 all-in-one. Downloaded the last installation on HP web site package. During the installation process I get an error message... Unable to find user/appdata/local/temp/7z256315/setup/...setup/blocksysuser...

  the 7z256315 folder does not exist on the hard disk.

  I also have a message that it cannot find PS_A10_02_software.msi.

  Windows 7, C6280 printer all-in-one. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via the wireless to the router.

  I hope you can help

  Thank you

  Charlie

  Hi cberistain,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77039-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 3645097 & sw_lang=.

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print and scan?