How to reconnect using wired through my router?

Similar Questions

• How do I share files via wifi router

  I have a question on the homegroup networking mechanism. My and one of my friends computer works via a wifi router. His office and it is wired through a router. But I can't find my friends computer on the network. The homegroup networking was was working completely fine while our connection was through the LAN. Can someone help me please how I can share files via the wifi router?

  Hi Tarik,

  Welcome to the Microsoft community.

  It seems that you need help to share files without wire. We're here to help.

  To share files via a Wi - Fi connection, I suggest you to refer to the article and see if it helps:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-in/Windows7/setting-up-a-wireless-network

  If you encounter problems, you can check the link and try to solve the problems it:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  Alternatively, you can check the link for more information:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/wireless-networking-frequently-asked-questions

  If you are always faced with the question, please answer and we will be happy to help you.

  Thank you.

• How can I use my time capsule as a hard drive on an existing network accessed through a password

  How can I use my time capsule as a hard drive on an existing network, storage, accessed through a password?

  We need more information in order to provide the right solution and Setup for you.

  You already have another router Apple... as an AirPort Extreme or Airport Express that provides the signal of your wireless network?

  If not, what is the serial number and model of your modem?

  Finally, what operating system is installed on the device you will use to install and configure the time Capsule? If it's a Mac and you're not sure what operating system it uses... click on the Apple icon in the upper left corner of the screen, then click on about this Mac, and post back with number of Version of OS X that you see there.

• Vista will not print works wireless but wired through router

  I have 2 wireless modem ATT DSL wire connected to a firewall server / print wireless Netgear FM114P ProSafe and a router 3Com to increase the number of connections.

  I have a Vista laptop that allows to print everything wired through my 3Com router connected to th Netgear FM114P ProSafe, server print/firewall wireless connected to a HP laserjet 6 p printer, but while Vista connects to wireless internet, it won't print wireless HP connected to the print server.

  I have configured the other portable XP to print wireless using the same ip address but can't get Vista to work.

  Hello

  Your 2 wire wireless mode, is actually a Modem/Router combo.

  I hope that your Prosafe device is connected as a switch with an Access Point.

  If it is connected as a second router you have independent networks that will not work against the second router NAT doble and thustwo.

  Re-set according to the principle here, http://www.ezlan.net/router_AP.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I want to use my network connection to neighbors through his router on my laptop

  I want to use my network connection to neighbors through his router on my laptop. He gave me the info to do it, I do not know where to enter it or where to go. HELP PLEASE!

  Hello

  What operating system do you work?

  You can refer to:

  http://Windows.Microsoft.com/en-us/Windows/view-connect-available-wireless-networks#1TC=Windows-7

• WRT54G - cannot connect computer wired to the internet through a router

  I have the WRT54G and unable to connect to the internet when you are going through the router.  I feel that I've checked everywhere can, but still does not work.  I connected the way the instructions, the lights are on the case and all that.  I have cable internet and when I plug directly, there is no problem.  When I try to 'ping' to check the connection between my computer and the router, I get "Request Timed Out".  I tried to reset the router and goes in this direction, but I can't go beyond checking the internet connection through the router.  Any ideas what I'm missing?

  Thank you!

  You should not use the installation CD at all.  If you throw it away.

  See here for the installer of cable.

• How can I add a network from Windows XP to Windows 7 network. I use a Linksys WRT54G2 router.

  How can I add a network from Windows XP to Windows 7 network.  I use a Linksys WRT54G2 router.

  Try the method here...

  http://www.howtogeek.com/HOWTO/15247/complete-guide-to-networking-Windows-7-with-XP-and-Vista/

• How can I use Photoshop to remove scanned Brown adhesive around the edges of a digitized photo and keep the image showing through the band? Thank you very much.

  How can I use Photoshop to remove scanned Brown adhesive around the edges of a digitized photo and keep the image showing through the band? Thank you very much.

  Dear Melissa,

  We thank you for your email about my problem with the Brown stick Ribbon at the bottom left of this photo. I attach the screenshot. As I said before, I need to remove the Brown adhesive while maintaining the image of the small low boat left and its mast covering the band. Is it possible to do this with Photoshop?

  Kind regards

  Robert Bellingford

  

• Can I use a hp b209 and a hp4500 wireless through a router on the same network

  I have two HP printers that I would use wireless via a router. When I tried to set up the two of them, one or the other is not recognized. I tried to uninstall and reinstall and nothing seems to work.

  Ok.  Uninstall all software HP from start > all programs > Hewlett-Packard.  Then restart your PC.

  Now, download the latest version of the software for the 4500 from the "Support & drivers" link at the top of this page and install it.  Restart your PC.

  Finally, since the same link on this page to get the latest version of the software for the b209 and install it.

• Remove or replace the name of the network (Vista, wired to the router)

  I have 4 computers on my network home (a new laptop and Windows 7 desktop computer and an older laptop and desktop Vista, which are replaced - laptops are wireless).  I had a LOT of problem with printer sharing, especially after a reboot printer goes offline, and I can't find any way to get them back another remove printers and reinstalling (disappointment, disappointment, disappointment) online.  And then I started having problems with one of the Vista (cables to the router) computers access the computer Windows 7 new, also wired to the router.

  Then I will begin first with the last problem.  Trying to get the old wired Office Access/recognize the new desktop windows 7 Wired, I ended up resetting my fairly new Linksys router e2500 to its factory setting - and in the process gained a new network name.  I finally understood how to get the laptops wireless to recognize the new network (should be easy, but it wasn't), but the old wired Vista insists on the use of the former name of network, one that appears in the network and sharing Center implementation.  The other funny thing is that even though she seems to be using the former name of network, I put on Jack autour with her so I don't have Internet access on my old Vista computer.

  I guess that because it is trendy, it seems not to worry about the network name, but it's bothering me because it's not fair.  However, I can't find any way to delete the old name of network.  I spent the day on that and am still confused.  Baffled because it is working and baffled because I can change the name.  I also get a lot of mistakes "Windows cannot access \\myWindows7computername" when I double click on the name displayed in the network folder of Windows Explorer (probably more serious problem).  In any case, I want to address what should be first the problem of easire.

  I discovered enabled network, public folder sharing, which transforms file on the computer discovery and Vista network, sharing the printer and sharing active files (but only on the printer and all the other things of file not checked), and sharing files public computer to Windows 7 (the one with the printers connected to it) - and passwords disabled on both (all computers).

  So my first question is how to make the network name on the Vista desktop wired old deleted/changed/replaced for the new name of the current network.  Why it does not insist in using the former name of network that no longer exists.

  Ron in round rock

  Sorry about that, but I got my answer from another forum, a Linksys Forum - and I will talk about a few things in case other people have this problem/question.

  To remove the network name that appears on the Network Center and sharing, click on the link to customize to the right of the network type - and on the next screen, click on merge or delete network locations, you will / should be able to remove (don't know what fusion done or means) the network with the wrong name, EXCEPT that you can't remove it If it is being used (which is / was the problem I had).  When I unplugged the cable between the computer and the router, I was able to remove the network location (the one with the old name of network), I tried to get rid of.

  Now for the confession.  All this has nothing to do with the name of the network - and most of the things in my original post is just smoke also.  I was going down the wrong path.  It turns out that with computers connected to a router, there is only one network involved and you can call it anything you like and it will work.  There is no selection of a network involved as in the case of a wireless network.

  Network with wired computers name is determined lby network name "you enter" on the screen to customize network settings, the screen you get when you click Customize on the screen of the Network Center and sharing - and you can type in anything you want here.  I'd so go through all this.  I simply had to re - enter the network name on the screen to customize network settings, that is simply a name that you can use for your own reference.

  Ron in round rock

• HP deskjet 2540: stop page print quality and 'use printer wireless without router' printing

  After installing the hp deskjet printer 2540, all operating systems (vista, windows, mac os, windows 8) correctly printed.

  I would like to prevent the printing of print quality page whenever the printer is on and to prevent print also the page "use printer wireless without router" (it would be better not to waste the ink).

  Thanks for any help you can provide

  Hi there @lesart55.

  Welcome to the HP community!

  I have seen your post on how your Deskjet 2540 prints a page of print quality every time that the printer is on, and also the page "use printer wireless without router" is printing.

  I'll start with the PQ page that prints at the start of the printer, as it is normally a sign of a hardware problem with the printer.

  Try to update the firmware on the printer. Here is the link to download and run the update using a USB connection to your Vista system: HP Deskjet 2540 series Firmware update

  Try a reset of the power to the printer and make sure the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help greatly.

  Press the power button to turn the product on.
  With the product, unplug the power cord from the back of the product.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the product.
  If the product does not light by itself, press the Power button to turn it on.

  If the PQ page always print after you are done troubleshooting, try the steps outlined in this guide below. I looked at the steps that I see would take place in the tent for your specific problem and chose the steps following, Please do not take account of the actual title.

  An "Incompatible cartridge or"Missing cartridge"Error Message is displayed for HP Deskjet 1510, 2540 Deskjet, HP Deskjet Ink Advantage 1510 and Deskjet Ink Advantage 2540 all-in-One Series Printer"

  I hope that the problem has been cleared up for you at this stage. If this isn't the case, please call us directly to discuss your options of the printer!

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  

• Cannot check the Internet using my WRT54G2 V1 router.

  I have Blue Ridge cable Internet.

  I can connect to the internet perfectly by directly connecting the cord to this laptop that I am.

  I ran the CD for my WRT54G2 V1 router, and at the end of the installation it says my router is configured, but he said that it was not connected to the internet.

  I tried several times to fix this in troubleshooting, but none of them worked.

  I DID however just simply disconnect and reconnect the router after about 10 attempts and I've been on the internet for about 20 seconds. (I looked for something on google and found research.) But internet is turned off and it just says "Local".

  I want to connect to the internet using this router and thus be able to connect the members of my family with their laptops through this router.

  Thank you.

  Configure your router for Internet connection

  CLICK HERE for instructions

  To configure a router Linksys with cable Internet Service

  Make sure you follow the mac cloning procedure because it is the key

• Can I use the Time Capsule wireless for multiple computers without using it as a router?

  I am looking for an external backup for 2 computers drive.  I have a desktop iMac and MacBook Air.  I like the idea of being able to back up my MacBook Air wireless, but I need to make sure that it will work the way I need to.

  I already have a wireless router that works well for me, I don't need the time Capsule to act as a router. I'm just needing a wireless backup drive.  So, the question is, can I use the only time Capsule as a storage device for backup of wifi or do I also have to use it as a wifi router?  My fear is that the router service is not as good as the router, I currently have.  I live in a big House of 2 floors, making it very difficult to receive a strong signal throughout the House.

  can I use time Capsule only as a backup wireless storage device or do I also have to use it as a wifi router?

  Time Capsule need to connect to your router/modem existing using wired Ethernet wired, permanent.

  If you plan to use the time Capsule to back up your Mac with the help of the application Time Machine on every Mac, the Mac will have to save on the wireless signal Time Capsule for the process to be officially supported by Apple.

  While it is possible to turn off wireless on the Time Capsule and try to save it to your existing wireless network... and it pourrait work... but there will be no Apple support backup problems... so it would be a good idea to plan to use Time Capsule wireless backup purposes.

• Network configuration of Roaming Wifi problem I just bought an Airport Extreme and I intend to use it as my router

  I just bought a refurbished Airport Extreme and I intend to use it as my router & combine with our old time Capsule of existing one to create a roaming Wifi network.

  The new Airport Extreme (renovated) is in my studio/Office - directly connected to our internet broadband wireless (WAN port)

  Our small ethernet is connected to my iMac [mid 2010 running OSX 10.11.5] & a PC and extends up to 2 other domains through an ethernet switch.

  This configuration works very well, our internet speed has improved slightly - better than our old T-Link router bit.  WiFi available throughout the House - better on one side.

  Time Capsule (2 TB) is connected by ethernet on the far side of the House, offer backup Time Machine and strong Wifi to this area.

  This time Capsule was an existing installation that went perfectly with the T-Link before I bought the Airport Extreme.

  I used the Airport utility to set everything up and it seems to work.

  The problem is:

  Combines the Capsule and extreme connected & active, the Internet gradually slows down and grinds to stop. -Wifi seems to follow suit, but is much more gradual.

  If I disable the Time Capsule, the internet connection is back to normal, Airport Extreme Wifi signal is strong and extends to almost all areas.

  I got to the departure of the two units configuration problems, so I reset both factory default and from that moment managed to do all this work - with the exception that the internet connection slows down.  Whenever I visit a different web site, it takes more time to load/link upward.

  I spoke with our ISP, the link to our tower is solid. The technology suggested that I put Wifi on each unit to use a different channel (2 frequencies & several channels each available).

  So far, this has not resolved the problem, I will continue to make adjustments.

  I googled this - most of the answers are not to date - usually 2012, 13, 14. and not directly related to my situation.  But I will continue my search.

  I'd appreciate if anyone here has any suggestions

  The new Airport Extreme (renovated) is in my studio/Office - directly connected to our internet broadband wireless (WAN port)

  What is the number and the model of the modem or modem/router that your ISP has provided you?

  Should we assume that you use a Mac with the help of a current or recent operating system?

  If you get out of the Capsule of time and leaves disabled for now, the network AirPort Extreme continue to run at full speed for a few hours and not slow down?

  We ask these questions because we must first confirm that the AirPort Extreme works properly until we can begin to troubleshoot the connection to Time Capsule.

• How can I use Office Update without the Office CD?

  How can I use Office Update without the Office CD? On the microsoft Web site, I clicked the options which mean that I would not need the CD (which was not provided with the laptop), but poartway through the service pack update, I get a request for the Office 2000 Professional CD.

  Any suggestions?

  Hello

  Did you mean an office or a note?
  As far as I know the a Note is part of the recovery Image and the CD is not supplied with the unit. In addition, Toshiba units are not delivered with the Office 2000 software.

  However, have you checked to aid either in Word update function?

  You will find an option called verification of updates
  http://Office.Microsoft.com/en-us/officeupdate/default.aspx

  Good bye