How to repair Windows startup?

Similar Questions

• How to disable windows startup sound

  I want to disable the sound my laptop lenovo makes when it turns on. It is really strong and unpleasant in class.

  Hello

  Control tab of control panel - sounds - sounds

  You can change the entire sound scheme or use highlight a sound, and then go to change
  one at a time.

  How-to: change the Windows Vista startup sound
  http://NeoSmart.net/blog/2007/how-to-changing-the-Windows-Vista-startup-sound/

  Pimp my Windows Vista: how to change your sound scheme
  http://www.vista4beginners.com/how-to-change-your-sound-scheme

  How to change Windows Vista (and Windows 7) appears.
  http://www.WinVistaClub.com/F29.html

  Change system sounds
  http://www.Microsoft.com/enable/training/windowsvista/sounds.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to repair windows XP slow farm process?

  When I stopped my system, it must be at least 5 minutes to stop down...

  During the shutdown of the Windows XP computer, it may take longer time to complete the shutdown process. Slow stops are caused a lot of factors. Clear pagefile at shutdown option enabled is the common cause.

  Use the Group Policy Editor

  Click Start, run and type in "Secpol.msc".
  Click local policies | Security options
  In the right pane, set stop: clear the pagefile of virtual memory for people with reduced mobility

  However, this setting is not the only cause of slow closures. No relevant programs and Services also contribute to slow closures.

  If the problem is seen recently after installing a driver software or third-party, try a system restore to see if that solves the problem of the slow stop.

  How to restore Windows XP to the previous step: http://support.microsoft.com/kb/306084

• Qosmio G20: How to repair Windows without formatting?

  Hello
  I have a qosmio G20 bought in October 2005. I need to repair my OS. The CD/DVD provided with the Windows XP MCE do not provide an option 'fix' as one provided when you buy a copy of Windows. How can I repair my OS without format my laptop?

  Thanks in advance for your kind cooperation

  Antonis

  The supplied restore CD does not contain the repair console because it s not an original Windows CD. The restore CD contains only an image of the files. Don't mix it with the CD of Microsoft!

  To get into the repair console, you will need the original CD of Microsoft Windows.
  I also read on the Microsoft site that it of possible to download the repair on 6 discs FDD console. Then you could boot from this drive FDD and you might be able to get into the repair console. But I have never tested this procedure.

  I found this useful MS document also how to install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

• How to repair windows installersystem on windows vista

  Is not let me install any update of windows, because there is that a meessage returns to windows install systwm does not work

  How to resolve common "Windows Installer" problems

  http://support.Microsoft.com/kb/2438651/en-us>

  UTC/GMT is 03:59 Monday, April 30, 2012

• How reinstall/repair Windows DVD Maker? (Win 7 Home Premium) 'Add music' does not work

  I recently moved my music on an external hard drive folder to exclude images during the backup. When I went to make a video of photos and music with Mindows DVD Maker (supplied with Windows), I found there is no function to 'Point' the program to the location of the music files. I brought back them to the location of origin, but when I go to 'ADD Music' button is not take me to get music files. I have a Windows disc or whatever it is with Windows DVD Maker Program on it. Will I need to buy a drive for Win 7 Windows to re - install this program?  A disc of Windows 7 will allow me to programs of "repair"?

  Hello

  We are happy to know that you have solved your problem. Please let us know for any further assistance. If you have questions, you can always post here at Microsoft Answers.

• How to repair windows after windows explore crashes?

  All of the programs on my computer like lag and crash constantly now and I tried the recovery disk creator and it worked that partially (composed quickly again my computer startup). Help, please! Thanks in advance!

  I solved the problem by updating to windows 8 developer preview and I'm moving on my backup files.

• How to repair windows media player 12 corrupt dattabase 8 64-bit

  I know that this problem has continued on Windows 7, there is a fix to clear the database and rebuild. But don't know how to do it on windows 8.

  It's an album art problem, when you try to change you get just ERROR telling you that you cannot change while the song of the album is in use...

  Help, please... I spent a lot of time in media player 11 get all my songs to correctly display the album art. Now, all that seems to have been in vain.

  And if there is no good solution for media player 12 is there a way to remove the 12 version and install version 11...

  I had a problem with any file in the library.
  She ended it was damaged and that's how I fixed it.

  Access the Windows File Explorer.
  Access libraries.
  In the right pane, delete the music library.
  Then in the left pane, right click on libraries and press on restore default libraries.
  Now, go to organize, manage libraries and click music.
  Make sure that the files you need are included and WMP should rebuild the library.

  It worked for me and now things are normal again.

• How to rebuild Windows startup files?

  I installed Windows Xp NTLDR in my removable disk and set up the boot.ini file and started my 1 Windows Xp partion.

  I had downloaded the EasyBCD and tried to fix it and it gives the folling error "the boot configuration data store could not be opened ',' ' the system cannot find message for message number 0 x %1 in the fiir of %2 messages." "
  I had Vista and Xp, I didn't have to install the bootloader of Windows 7 on my removable disk, so I installed the Xp boot on my removable disk and bootted my Xp Manager.
  I tried to install the Windows Xp loader for some time, the i had planned to get a Windows 7 disc and run Setup and I have menu will be recovered with my Vista and Xp then I would remove the WinSetup Option in the Menu using the EasyBCD.
  I had reinstalled my Ubuntu too, but GRUB indicates Windows but the same problem.
  Now I need if is it possible to install Windows Vista Boot Loader or at least Legacy Boot Loader to my drive.

  Hello

  It seems that this message is specifically related to EasyBCD which is developed by NeoSmart.  I suggest you to check with NeoSmart on error.

  This can also be caused if you forgot to copy some files or the system partition.

  Here's a thread I found on their forums that could provide a bit of insight from anxiety. http://NeoSmart.NET/forums/showthread.php?t=5073&page=1

• How to change windows startup screens 7 in English

  I'm changing a friends of Chinese-to-English computer.
  I managed to change all the user interface to English once it is connected, but after a reboot during the blue screen which shows what is loading, it is always in Chinese.

  How can I fix?

  Thank you

  I found the solution.
  I opened regedit and went to.
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\MUI\UILanguages
  I deleted the keys for the Chinese and left only English.

  Rebooted, and all start menus were in English! Yay!

• My computer guard direct me to the Windows Startup Repair loop. Is this a virus? If this is not the case, what should I do?

  OK, here's a little history:
  When was surfing the Internet (using Mozilla Firefox), he froze and said that he "did not." Then I left the computer alone for a good 15 minutes, but to realize that nothing happened. From there, I decided to disconnect the computer to see if I can re - open Firefox. But when I tried to connect it back, the computer take me on the desk. It was stuck at the screen that says 'Welcome' (the form that appears after clicking on your user name) in the end, I turned off the computer by holding the power button, because there was nothing I could do. When I turned on the computer a few minutes later, it was time that I met a huge problem.

  The problem:
  When I turned it back on, a black screen appears that gives you the ability to boot your system with a repair on your computer, or start normally. I chose "start normally. After that, it took me a blue screen with a window that says "Startup Repair". He began to scan the computer saying «attempted repairs...» "When I saw this, I turned immediately shut down the computer, thinking it was some sort of virus that pretends to fix the computer. Nevertheless, I decided to turn it on for the second time. Of course, it's the same thing. But this time, I allow the scanning process to complete. When it was over, he said that the system could not be repaired and advised me to contact Microsoft, with my "contact information." I took this as a red flag, and click Cancel. I suspected it was an attempt to identity theft. (Though, I could be wrong, of course.)

  Honestly, I don't know if if there is indeed something wrong with the computer or if it's a virus.

  I tried to find out by going online and looking for solutions. From there, I tried a method where you press F8 several times until the Advanced Boot Options go up and selected "Last known Configuration" that did not work. I also heard on the "chkdsk" method, but I don't know how to do and there is no guarantee this will work.

  After that, I did more research and realized there were several ways to solve this problem. But when I went through the tutorials, the steps have been very confusing to me. I felt like most of these tutorials aimed computer technicians or people who knew in fixing computers. The steps were so confused until I found myself referring more questions than real answers!

  So now I'm reaching out to help, and I really need! It would be greatly appreciated! I really don't want to format all my data.

  Please keep in mind that I am a lover of computers operating. The two programs I normally use are Mozilla Firefox and Microsoft Word. So please don't be assuming that I know my way in and out of a computer. I'm no where near, in every sense of the term, an 'Expert '. If you can, I would like a simple, easy to follow, simple tutorial, step by step, which is not turned to professional users. Still, I am not very competent in operating computers.
  

  Hello

  You have tried yet.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

  p.s. If the message is genuine, please read this:

  The startup repair options are provided with a large number of systems of operating pre-installed.

  If this does not work, please read this

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

• Windows Startup Repair failed

  Event name: StartupRepairV2

  Signature 01: Autofailove

  Signature 02: 6.06000.16386.6.0.6001.18000

  Signed 03:6

  Signature 04:131074

  Signature 05: no root cause

  Signature 06: no root cause

  Signature 07:0

  Signature 08: 1

  Signed 09: System Restore

  Signed 02:0

  OS version: 6.0.6000.2.0.0.2561

  Locale ID: 1033

  my system repeatedly fails at startup. earlier repair work starts and when I select Restore restores point to last files.

  but on both occaisons I got a message saying that windows cannot repiar system and the error message as above was posted. later, the restore worked!

  Please help fix the winows

  Hello, Pushi_915,

  This question belonged to repair the system and recovery Forum.  Note the drop-down menus:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-System?tab=unanswered

  I've included the link for the same cause and resolution as follows:

  How to do a startup repair disk:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/startuprepairv2-with-problem-signature-01/e78dc24a-63e7-4314-8dc6-b1398981f41f

• How to skip the Startup Repair...

  How to skip the Startup Repair... I started from the install disc and want to "restore full backup for PC. I selected the partition with the corrupt windows installation. The process is suspended, check disk for errors. This check can be ignored. I know it is corrupted and you want to restore completely. No need for this control.

  Hello

  What happens if you leave the disk check to run its course without interfering with it?

  And it is not a good idea to have a backup on the same hard drive, due to the possible failure of the Hard Drive altogether.

  I'm sorry, but nobody here knows why, your system is damaged. There may be problems with bad sectors on the hard disk.

  I suggest download you Diagnostic tools for your hard drive manufacturer, make a Bootable disc and run a diagnostic test to see what the problems are, if any, there is with this hard drive.

  http://pcsupport.about.com/od/toolsofthetrade/TP/tophddiag.htm

  See you soon.

• I'm going to repeatedly use windows startup repair system to start my lap top.

  I'm going to repeatedly use windows startup repair to start my lap top. Especially if the problem, but sometimes I had to reset to an earlier date. Any ideas why please. Jenny

  Hi JennyPlaster,

  ·         Did you the latest changes on the computer?

  ·         How long have you been faced with this problem?

  ·         What happens when you try to start in normal mode?

  ·         You receive an error message?

  I suggest that you try the procedure described in the section provided below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

• How to repair this error C:\Windows\System32\mscoree.dll__

  How to repair this error C:\Windows\System32\mscoree.dll

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  If necessary:

  Mscoree.dll could not be found error resolution
  http://pcsupport.about.com/od/findbyerrormessage/a/mscoree-DLL-not-found-missing-error.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.