How to replace inside the faulty RAM on Satellite M40X 141?

Hello world
I strongly suspect a main RAM failure. It is possible to replace it by removing a slot or is it is soldered to the motherboard?
In this case is the only way to fix Board replacement?
Like the RAM to be located under the keyboard, which is the best way to proceed for replacement?

Thank you much for the help.

apipop

Hey Popy

The laptop has 2 slots, but only one is scalable user.
I think the a slot is located under the keyboard and the expandable slot, you will find at the bottom of the unit.

I think you n t a lot of experience with these replacements. Am I wrong?
I think that these replacement or controls are not very easy for someone who doesn't have enough experience.
So I think you should ask a technician or help!

Tags: Toshiba

Similar Questions

  • How can I increase the video RAM on Satellite 1800?

    I want to increase the ram video shared in (Trident cyberblade Ai1 vga) from 8 MB to 16 or 32 MB. My laptop is Satellite 1800-804. I'm not able to see the configuration of the BIOS for this module.

    Can anyone help?

    Remond

    Hmm, maybe I m wrong but as far as I know this laptop supports only 8 sheared MB memory graphics card. I did not found anything about 32 MB.
    In any case, if the BIOS has no option for memory sheared increasing so be it s is not possible or you should check the properties of the graphics card of the art.
    There, you should check the performance tab.

    But as I said above, it of possible that the graphics card is supported only 8MB

  • Replacement of the rubber feet on Satellite 3000 - X 11

    Hello
    Anyone know where I can get 2 rubber feet of replacement for the underside of a Satellite 3000 - X 11? I spent ages by browsing the Toshiba site, but nothing useful coming.
    Thanks in advance
    Jon

    Hello

    I believe you can also order it through eBay.

  • How can I disable the touchpad on my Satellite L500?

    How can I disable the touchpad on my Satellite L500?
    I think he touchpad is interfereing with the cursor and text lines as I type, so I want to disable the pad.

    You can do this by using the FN + F9 key combination.

    Check it out.

  • How can I cut the internal of my Satellite L670-1JP louspeakers?

    How can I disable the internal of my Satellite L670-1JP louspeakers, without inhibition of output?

    Hello

    Try * Fn + ESC. *

    Welcome them

  • How can I start my Flash DRIVE Toshiba Satellite m40x?

    Hello.

    How can I start my Flash DRIVE Toshiba Satellite m40x?
    In my BIOS is not be option - boot from usb.

    Help, please.

    Hello

    As far as I know is not possible. Sorry but there is nothing to do.

    Good bye

  • How to replace the screen broke on Satellite M40X-251?

    Hi guys!

    This phone fell an office and the monitor is completely messed up. Nothing else seems to have been damaged, and it still works fine on an external monitor. I'm looking for a screen replacement and instructions on how to replace it.

    How much would cost a Toshiba 15.4 widescreen monitor TFT of 1200 * 800 and where I could get it?

    I can't find a manual explaining how to disassemble a laptop Toshiba M40X to replace the monitor. Could someone give me a link to these repair manuals or to guide me through the process?

    Thanks in advance!

    Found these instructions, I think they would work for a M40X but if anyone can confirm:
    http://www.irisvista.com/tech/laptops/ToshibaM35X/satellite-M35X-display-1.htm

    And the resolution is 1280 * 800 not 1200 * 800, little mistake.

  • How to replace only the new files when copying

    When I copy existing files in a folder (inside the Windows Explorer) with another with the same name,

    I want to just replace the recently modified files.

    Discover (ROBOCOPY) robust file copy utility included in all versions of Windows from XP:

    http://technet.Microsoft.com/en-us/library/cc733145 (v = WS.10) .aspx

  • Slideshow: How to replace on the arrows 'Next' and 'Previous' with custom arrows?

    On the homepage of my site, I put in a changing picture with Widgets Library > slideshows > Basic, then added in the images. the only thing I don't like is the appearance of the standard ' Next' and 'Previous' buttons. In want to replace their previous custom and buttons that I created in Photoshop. I tried to do by double-clicking on the icon 'Next' and then hit the blue circle/arrow, then press "Add picture" and select the file with the arrow custom, but instead to replace the icon/button 'Next', she just added the arrow custom slide show. I looked in the tutorials and help online but can't find an answer. Anyone know how to replace the arrows "Next and previous" with custom arrows?

    Hello

    To place your own images for the button previous and next, you use the fill feature. Please check the following steps:

    1. go slideshow options and uncheck the Edit set.

    2. Select the next button and click complete to open filler panel.


    3. click Add picture and select the image you want to use. Also select the type of connection as "Scale to fill" or "scale to fit"and make the 'Center'. "

    4 do the same for the previous button.

    Concerning

    Vivek

  • How can I get the upgrade on my Satellite 2450-201 wireless?

    I'm a total newbie in the wireless world. Currently have a main PC connection broadband. I have my Toshiba laptop to my United work and need a constant internet access, which is difficult with 5 belonging to the family using the broadband on the PC

    How do I do to upgrade my laptop for wireless use? Any recommendations on what router also use?

    Hello

    Wi - Fi is an option on this laptop.
    This means that the WiFi network could be available at the time of purchase, through the upgrade or a Toshiba authorized service provider program.
    To my knowledge, the minPCI wireless network card might gladly inside the laptop.

    But the easiest way would be to use the WLAN USB key to prepare the laptop WLan.
    You ask the best router? Many ISPS provides own router devices. I advise to use a WLan router that supports the standard 802.11 B and G standards.
    If you use such as router, you must also purchase a USB WLan stick that supports the same WLan standards.

  • How to boot from the CD from Toshiba - Satellite 2450-101?

    Hello everyone,

    I would like to know how to start from the cd to install windows xp.
    I have a toshiba laptop (Satellite 2450-101).
    I'm not sure but I think dat This model has a DVD player in scii. Dat is the problem?

    Kind regards
    Steve.

    Hello

    If you use the internal CD/DVD drive you press simply the C key immediately after starting the laptop or you will simply change the boot order in the BIOS to CD/DVD drive.

  • How to change in the BIOS at startup Satellite C of ODD

    How can I change the BIOS to boot the laptop from DVD?

    What cell phone do you have?

    In the case of notebook with UEFI BIOS you must disable the safe boot option to boot from an external support...

  • How to turn on the lights on a Satellite P300-23V + user guide on CD

    I wonder how you turn on the light a SATELLITE P300-23V?
    I mean the light that show a bar above the touchpad and and the name of the Satellite is too bright.
    In the manual it says how to do it with the slim remote control, but it's not on this model.
    I know I could turn on the light with a combination of keys before, but now I can't find it now.
    I updated to Vista 32 bit to Windows 7 64 bit and maybe some features of Thoshiba was lost what to do?

    I also lost my CD with the most extended usage guide. I searched the download area, but it doesn't seem to be here for download.
    All Tips how to get it?

    with the remote?
    Go to BIOS settings and in advanced option there should be an option for lighting.
    Please try it and tell me if it works for you.

    S user manual download go to support portal under http://eu.computers.toshiba-europe.com/innovation/generic/SUPPORT_PORTAL/ and scroll down to download. You will find the option for manual Toshiba of the user.

  • How can I clear the CMOS/BIOS on Satellite L10 password

    HOW can I clear the CMOS/BIOS password?

    Hello

    Sorry to say this, but it of not possible to remove the BIOS password without help from the Toshiba authorised service provider.
    The special procedure is required to remove this password.

    Therefore, you have only one way out. Contact the ASP in your country and request removal of the BIOS

  • Replacement of the CPU on my Satellite 1000-s158

    Hello from Russia! Sorry for the poor knowledge of English, the message is translated by the translator of the computer. With the greatest pleasure a few years that I use Toshiba Satellite 1000-s158.

    He is very happy with the purchase. Unfortunately, my income does not allow to get more modern notebook. If the replacement of the processor for this notebook on most recent processor is possible? And if so, on what model CPU? Grateful in advance. Yours faithfully, Andrey, Russia, Arkhangelsk

    Hello

    Unfortunately, it is not possible to change the processor of your laptop. Your motherboard is built in such a way that it is not possible.

    Best wishes

Maybe you are looking for

  • I think I was hacked, I receive emails from me to me with no subject, as my friend said that I sent them when I did not.

    computer hacked I think I was hacked, I get emails from me to me with no subject more my friend on yahoo messenger says that I sent them when I don't have now, it tells me I have errors on yahoo messenger, but I can get my mail, but now I have no sho

  • Connectors

    Hi all do you know where I can find the ORC the image and description of all the connectors used in optical networking. Concerning Matteo

  • Cannot add or remove files and folders to my favorites

    Since I transferred my favorites from my old computer to my new computer, I can't add new files in the folders I had, or remove files or files that were in the list.  If I use the option "Organize Favorites" to delete a file, I get a dialog box title

  • Remove windows update

    I'm having a problem after the update Windows through which my remote desktop connection was able to establish. I tried to uninstall all updates, however, after the server restarts, it automatically returns the changes.

  • Call the Notification Destination URI

    We work in 12.2.4We have a warning Page, consisting of linkLink nothing else that a service is what OFA PageIt is, when you click on the link, it displays errorERROR: you have enough privileges for the operation. Please contact your system administra