How to select the two variables of Recordset

Similar Questions

• Hello! Can someone tell me how to select the two scenes of an existing project and color correct them in black and white exactly please?

  Hello! Can someone help me please? I'm learning just on Final Cut Pro and I have a family movie finished, edited by a professional editor years ago but I need to move from the stage two very bright red (shot on film light of day and used inside) only black and white. Whenever I select the specific images to change black and white selects the entire movie instead. Can someone help me please? Thank you, Tony

  Very fast: select, type command-6 to open the accelerator card and bring the Saturation all the way down.

• I try to combine a picture of my sister with a picture of a poem next to her. How to combine the two into a single photo?

  Paint or Windows Photo Gallery

  I try to combine a picture of my sister with a picture of a poem beside it, how to combine the two into a single photo?

  If you have the poem recorded in an image format,
  the following freeware can create a side by side
  Panorama.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download IrfanView
  http://MajorGeeks.com/IrfanView_d4253.html
  (filename: iview433_setup.exe)
  (uncheck if you don't want Google Chrome)

  Download plug-ins too...

  IrfanView plugins
  http://MajorGeeks.com/IrfanView_PlugIns_d4908.html
  (filename: irfanview_plugins_433_setup.exe)

  When the program is installed... read more...

  Open IrfanView and go... Image / create the Image of the Panorama...
  (this will open the screen to "Create a panorama image")

  On the screen to "Create a panorama image"... left click on the add images"" button.
  (Displays the 'Open' screen. Now, drill down to the
  the folder that contains your saved Photos of veterinarians.

  Now... click left (highlighted), the two images, you want to join.
  (you can select more than one if you hold down your Ctrl key)
   
  The two images highlight... left click on the button 'open '.
  (Or... you can add the images one at a time... which is always easier)

  Now, go back to the screen "Create the panorama image.
  and the file names of the selected pictures need to be in the
  Field "Input Images.

  Now with the names of two files in 'Images of entry' field...
  You can left click on the button 'create Image '.

  (the positions left and right of these images can be swapped in)
  selection of a file name and using the "mount image" / "Move."
  Images down"buttons...)

  Now you should see a display of the combined image.
  Reach... File / save as...

  Choose a backup location / enter a file name / choose a format...
  On the left, click on the button "Save..."

• How to select the pieces of my image in black and white?

  How to select the pieces of my image in black and white? FOW example letter J or the circle or the two together?

  

  It's actually pretty easy, but I have to assume that you know a few basics in Photoshop

  (1) open your existing image

  

  (2) double click on the layer and the 'layer style' appears. In the mix if area set the sliders so the whites in the image disappears

  

  You will be left with just the black elements in design

  

  (3) duplicate layers

  

  and merge them together

  

  to give a standard layer

  

  (4) ctrl or cmd click on the layer to select and create a layer mask

  

  (5) you now have a mask of the image. Duplicate the layer, click alt or option, click on the layer mask to call

  

  (6) the blacks and the whites are not completely black and white for the use of levels to adapt to the absolutes

  

  (7) now you have to decide what you want to select. In this case, I chose the lettering and simply covered everything else to the top with black. You do this by lasso selection and fill and items when it's delicate brush just the details with a black brush "hard." .

  

  (8) at this stage, you can do what you want you have a layer mask. So you can color the text for example

  

  or place in a background color and apply a layer as Beveling effect

  

  Hope that makes some sense. It is much easier to do than to describe.

• Printer all in one HP3520 - how to select the wireless network and enter the WEP key?

  According to print my wireless network is detected.

  How to connect the! @# % printer $ fo the wireless network and enter the WEP key?

  Instructions on the HP site tell me to selet NETWORK on the printer control panel.  Well, there's a way to select the NETWORK from the control panel.  It is not an option for him.

  I downnloaded and installed the latest drivers.

  I have restored the default settings.

  How to select the wireless network and enter the WEP key?

  All of HP's instructions seem to be for a newer printer with a touchscreen.

  I want that the printer is connected to my main computer via the USB port.  I want to be able to print wireless phones and tablets.

  My 3520 is not a 'touch Screen' and it has wifi.

  However, the following work:

  Try to open the HP Deskjet 3520 icon, open the utilities tab, click on convert USB wireless, by following the steps on the screen.

  This leads me to believe that ONLY the wireless doesn't work.  I know now that the part of the sentence "Convert USB to wireless connection" is supposed to mean "works like USB and wireless.

  Thank you for your help

• How to tie the two serial numbers using test including the tie in the database.

  I have two separate committees, I need to link the serial number too.  One is being tested as a separate unit, then the two are tested together, I need to make sure that I connect them in the database.  Don't know how to do it, looking for any input I can get.  Using a labVIEW vi to request the entry of a Board, and then use information interface to USE testbed for UUT of the hand.

  I have juries, one of the boards, A onboard, was tested by a different sequence file, then A is connected to Board B, and then they are tested as a complete set.  Received a few suggestions on how to save the two serial numbers, but went with a popup message added types of step (modified record results), and then just have the user scann the second number in and it stands as one of the results of the step in the database.

• How to break the two folders that are cross-linked?

  I tried to move C:\users\richard to E:\My Documents ' My Documents'.

  Some how the two directories have become reticulate.

  Make any change in directory caused the same change in the directories of the sentence.

  How to restore the two inventories back to normal?

  I tried to move the directory in E:\ back to C:\, but received a parsing error.

  TIA,

  Richard

  Wednesday, February 5, 2014, 17:20:47 + 0000, Richard332 wrote:

  I tried to move C:\users\richard to E:\My Documents ' My Documents'.

  Some how the two directories have become reticulate.

  Make any change in directory caused the same change in the directories of the sentence.

  How to restore the two inventories back to normal?

  I tried to move the directory in E:\ back to C:\, but received a parsing error.

  The directory c: is not really a directory; It is a library which is
  just a pointer to the real directory on E:, a bit like a shortcut.

  So if you get there via the library or the directory, you are in
  in the same place - E:\My Documents and any changes there are also
  See in the library.

• How to use the global variable in the table target?

  Hello

  I am trying to load several files into a single interface. the data is loaded successfully. 92. the files are there. for this I used variables and package.

  My requrement is 92 files of data loaded into the target table. I want to know what data from file.

  to this I added a column (filename) to the existing target table.

  If I used joints (not same condition), its totally wrong. all file names are coming.

  Please see the following screenshots.

  

  exit; target table.

  

  in fact in the target table. first 10 lines are coming from file.i.e first _ACCOUNT_LIMIT_511.TXT. but all the files names are coming.

  I'm confuse. After the first data file inserted then insert second data file. in that all file names are coming. Please help me.

  I thought that the global variable is preferable to identify the data came from which file.

  to do this, the global variable is used in the target table. I don't always have my exit.

  Please help me.

  Thanks in advance.

  

  Hello

  You can use the same way, how you use the project variable, just you have to do a thin is #GLOBAL.variable_name for example: #GLOBAL. SMART_AL_FILE_NAME_S

  Note: Make sure you that while you use one variable overall in interface, indicator should be staged as you chose above the screen

  hope this helps you

  Kind regards

  Phanikanth

• How to select the Type of industry 8.3 Professional P6

  Hi all

  According to the document to change the type of industry for 8.3 Professional P6, I had to go to P6, Application settings, general link.

  But in the P6 Web client to administrator > Application Configuration > General there is no option is available for the type of industry.

  Let me know, how to select the type of industry?

  You can see the OPINION score "How to change the Type of industry P6 P6 PPM (Professional), P6 EPPM E8.2 and later versions (Doc ID 1386047.1)".

  Also can you paste a screenshot here.

• How to select the path to a file icon button to a table?

  I have a SYSTEM_PATHS table name. All physical access paths as 'where the forms of execution are located' or 'where performance reports are located' are stored in its ranks for example (C:\HRMS\FORMS\)
  I memorized the path of the icon files (.ico) inside. The forms of execution can take the path of the icons for the buttons of this table. And access the icon of the chosen path. I use forms 6i. Normally, I put the path of the icon files in the nerve to property of the button as (C:\HRMS\ICON\). But now, here, I don't have a path but its in the column of a table. How to select the path to a file icon button to a table using forms 6i?

  Hello Gul,

  have you tried

  set_item_property('Button name',ICON_FILENAME,);
  

  Concerning
  Marcus

• How to combine the two fonts in a logo type?

  I've created a customer logo ID, consisting of two fonts. The name of the customer is Trajan Pro. The logo must also include a "Registered" symbol (the circled R) after the name. Unfortunately, using Trajan Pro mode Exhibitor does not look good, especially scaling down and with a circle around the R. To work around this problem, I used the Arial font to create the® in a supplemental box, be able to fine tune its size and position. It's great for once, but I would like to be able to combine the two so that the name of the customer in Trajan Pro and the symbol "Recorded" in Arial can be re-scaling or repositionnes in unison and saved for future use. What is the best way to do it?  Here is an article of the logo to demonstrate what I have:

  Select the two text blocks and go to Type > vectorize. Group them. Now that you have drawn, no text. It is usually a good idea to save a logo in a separate file, which can be placed. Put the logo in its own file on one page of appropriate size. Save the file and export a PDF of print quality. Link to the PDF file when using the logo in other files.

• How to select the same forms of color in the adobe flash program?

  How to select the same forms of color in the adobe flash program? for example, we assume that 10 forms of rectangle. 3 of them are red and others are green. I want to use only one method or click to select 3 of them. Please help me

  Thanks kunter

  You can use Ctrl + F.

• How can I dynamically select the shared Variable API programming data type?

  I am trying to create a configuration of open connections of variable shared using the programming API. It seems to me that the cleanest way to do would be to put one "open and check" routine in a loop, then call it for each variable in the library.

  The question that I am running is that I have different types of data in my library (to help a server Modbus i/o and data types 'boolean' and 'single' in my library.) How can I dynamically select the data type of the shared variable API?

  See the attached snipit.

  Thank you

  What I ended up doing was doing a Subvi to open, read, write, and close each data type, I use the packaged in 4 polymorphic SubVIs (polymorphic Open, read, etc...)

  Now all I have to do I drop in the polymorphic Subvi and it switches automatically to the appropriate data type

• Assign the values of the two variables in a select statement

  I'm trying to set two variables in a select statement in my definition of the procedure. I get the error identifier not valid "ATTRIBUTE" running the following code.
  

  create or replace procedure tbl_auth (
  Email in varchar2,
  UserLevel out number)
  as
    v_Email varchar2(100) := lower(Email);
    v_login_chk number := 0;
  begin
   select UserLevel into p_UserLevel,
          v_login_chk into v_login_chk
   from tbl_User
   where eMail=v_Email  
  
  exception
   when no_data_found then
    UserLevel := 0;
  end tbl_auth;

  Can I not connect two different values to two different variables in the same select?
  
  Thank you
  
  Published by: jerry8989 on August 22, 2011 07:06
  
  Published by: jerry8989 on August 22, 2011 07:06

  change as follows:

   select UserLevel, v_login_chk into p_UserLevel,
          v_login_chk
  

  IN ONE ALONE is enough.

  BTW, don't you have "login Check" column in the "tbl_user"? If you do, your selection should be like this:

  ...
  select UserLevel, loginChk into /* check the column name in your table */
           p_UserLevel, v_login_chk
   from tbl_User
  ...
  

• How to control the two analog outputs at a time

  I'm new to LabVIEW and have some problems in DAQmx with control outputs analog multiple.

  I want to set up a platform using BNC-2110 and PCIe6363 to control two rotating mirrors. The problem that I can only give an output (AO0 or AO1) at a time and I really have no idea how revise my LabVIEW diagram to control two outputs at the same time I met. I tried to change the outputs and it keeps a mirror turning instead of the old. Could someone help me with my problem and I would really appreciate. This is my blocked diagram and front.

  

  

  Hi zrmaker,

  As mentioned by RavensFan, you should not create 2 analog outputs different tasks if you use AO0 AO1. To your façade > physical control or the channels > select the drop-down list of the control channel physical (s) > Browse > hold down the CTRL + select the AO0 and AO1 > Select OK. Once this is done, you will see that your control or the physical channels has the following input values: "Dev1 / ao0:1" which means that you will access to AO0 AO1.

  In regards to writing DAQmx, simply select Analog > multiple channels > samples multiple > 1 waveform (you should get the following: 1 d Analog Waveform NChan NSamp). Once done, you can just use table build to combine 2 different waveforms and plug in this table to DAQmx writing output. The first index will be the output for AO0 value and the other will be for AO1.

  You can check this link on how to read or write from several channels: http://digital.ni.com/public.nsf/allkb/0C1ADEF06A54AB2D862575040066FD51

  Additional reference:
  http://www.NI.com/white-paper/2835/en/

  Hope that helps.

  Warm greetings,

  Lennard.C