Just moved and my laptop is now unable to see my wireless network.

Similar Questions

• Unable to connect to wireless networking

  My Toshiba laptop has been pre-installed with Windows 7 Home premium 64 - bit OS and it worked quite well with the BB wireless. However, the wireless internet was on and turned off in recent weeks, while other mobile devices, such as iphone, ipad, or laptop, in my household had no such problem. The wireless signal was so strong, but the error message always says "unable to connect to wireless networking. It seemed that there was something wrong with the wireless adapter.

  I got a new adapter properly installed TP-Link wireless. Fortunately, it worked; but unfortunately, it worked for less than 24 hours. It was really frustrating that I, like student full time, depended so much on the wireless network card.

  Help, please! Harry

  Hello

  You can enlighten us with:

  -What model do you use (eg..) L300-123)
  -What version of BIOS is installed?
  -WLAN driver do you use?

  All these questions are answered in PC Diagnostics are under Toshiba app folder in the start menu.

  BR

  Tom

• Computer laptop everything suddenly does not "see" my wireless router, use to work properly

  I have a HP laptop and it has implemented a wireless network a wireless d-Link N router.  Everything worked well for about 3 months.  Now, he can not connect.  Running the troubleshooting application to choose a connection - all my neighbors show up, but not that of my house.  The router is also new (he and laptop were Christmas gifts).   It used to work fine with Windows 7 one and now nothing...  I can't it appears in the list of wireless connections.
  My laptop 5 years running XP is in line with this router and it works fine - so I don't think that it is the router that is the problem.
  Thank you!

  Hello Bchek,

  Thank you for your message.  Check with your D-Link documentation and settings to make sure that the SSID broadcast has not been disabled.  This would prevent you from being able to see the wireless network.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP Photosmart 7520 unable to find the wireless network

  Printer: HP Photosmart 7520 e - ALL - IN - ONE SERIES

  Router: NETGEAR router WNDR4000

  Hi all

  After receiving our new HP all in one printer, we have found our network wireless networks list wireless during the printer set up. We are able to receive the networks of our neighbors, but not our network.

  We tried:

  • Using the WPS function on the router and the printer
  • Establishment of an open on our router wireless network
  • Connect to our wireless router using the setting on our laptop when the option during the installation of a PC.

  Any help on this subjest would be appreciated.

  Best regards, Nick van der Lee

  Hello

  I found the problem that was the printer not to see the SSID of the router.

  The wireless channel was on channel 12 for the frequency of 2.4 GHz. While I was looking around I found this Support Page for Nintedo. Point 6 is a mention about these channels with respect to the same problems I was experiencing with the printer.

  By changing our channel to channel number 3 number, we could see the wireless network.

  It's a bit weird because I thought that the printer has a full specification b/g/n but apparently not?

  In any case thank you for your support.

• My PXE / ESXi autodeploy is unable to see my cards network Broadcom NetXtreme II 10 Gigabit Ethernet (BCM57810).

  My PXE / ESXi autodeploy is unable to see my cards network Broadcom NetXtreme II 10 Gigabit Ethernet (BCM57810).
  

  
  

  What I'm missing here?

  
  

  # Extract the bundle off the downloaded zip line and place it in C:\AutoDeploy

  Add-EsxSoftwareDepot - DepotUrl C:\AutoDeploy-VIBS\BCM-NetXtremeII-11.0-offline_bundle-1553810.zip - net-bnx2x name | Sort descending creationdate | Select creationdate, Version, StatelessReady, summary

  CreationDate Version StatelessReady summary

  ------------                          -------                                                     -------------- -------

  21/01/2014-07:10:23 1.78.79.v50.2 - true 1OEM.500.0.0.472560 bnx2x: driver for VMware ESX

  08-02-2012 03:00:42 1.61.15.v50.3 - 1vmw.510.0.0.799733 true bnx2x: driver for VMware ESX

  # Add the driver (use force because complains and fails otherwise)

  Add-EsxSoftwarePackage - ImageProfile "Profile001" - SoftwarePackage net-bnx2x-force

  # Check it is there

  Get-EsxImageProfile "Profile001" | Select viblist - ExpandProperty | where {$_.} Name - like "net-bnx2x"} | FT-auto

  Date created Version of the vendor name

  ----      -------                           ------   -------------

  Broadcom 1.78.79.v50.2 - 1OEM.500.0.0.472560 net-bnx2x 21/01/2014 07:10:23

  # Export

  Export-EsxImageProfile - ImageProfile "Profile001" - ExportToBundle - FilePath "C:\Users\Administrator\Desktop\ESX-Software-Depot\Profile001.zip".

  WARNING: The image profile is not validated.  ISO / offline Bundle will always be generated, but may contain errors and may

  functional.  Errors:

  WARNING: Requires the VIB Broadcom_bootbank_net - bnx2x_1.78.79.v50.2 - 1OEM.500.0.0.472560 com.broadcom.cnic_register - 9.2.0.0, but

  be satisfied within the ImageProfile. However, the VIb (s) Broadcom_bootbank_misc-cnic - register_1.78.75.v50.1 - 1OEM.500.

  can meet this requirement.

  > # Confirm ESXi image name

  > Get - EsxImageProfile - name Profile001 | ft - auto

  Vendor name has changed the level of acceptance

  ----       ------ -------------        ----------------

  VMware Profile001 27/02/2014 PartnerSupported 18:44:45

  >

  > # Net-bnx2x Confirm is a software installed

  >  Get-EsxImageProfile "Profile001" | Select viblist - ExpandProperty | where {$_.} Name - like "net-bnx2x"} | FT-auto

  Date created Version of the vendor name

  ----      -------                           ------   -------------

  Broadcom 1.78.79.v50.2 - 1OEM.500.0.0.472560 net-bnx2x 21/01/2014 07:10:23

  >

  > # Confirm the current rule of deployment deploys profile001

  > Get-DeployRule-name *

  Name: DefaultBoot

  PatternList:

  ItemList: {Profile001, cell01}

  If you put all the VIB - names in a single order, separated by commas, then it works fine

  Add-EsxSoftwarePackage - ImageProfile - misc-cnic-register,net-cnic,net-bnx2x,scsi-bnx2i,net-bnx2 SoftwarePackage

• Operating system is unable to find the wireless network adapter

  I have recently reinstalled Windows 7 on my HP Pavilion Elite on a new hard drive.

  Since the installation, Windows is not able to recognize the NIC wireless on my machine. I imagine that there are drivers somewhere on the recovery discs that I bought out of HP, but those who stick me in a boot loop and aren't really good for nothing.

  I opened the computer case and didn't see any wireless network adapter card (two cards are the video card and the expansion USB3 card), so I guess that means it is integrated. Who is?

  in any case, long story short, I want that my PC for wireless internet, as it did before my other hard drive has failed, but the recovery discs that I bought last week off the coast of HP do not work so I do not know what to do next. Is this a driver problem?

  For what it's worth, I downloaded a bunch of the "drivers" section wireless network adapters and went through them until I found one that worked.

  Problem solved.

• Moved from Office Windows 7 from one room to the other and now it cannot find the wireless network

  Hello world

  I have a HP Pavilion running Windows 7.

  He was hooked through the ethernet in a single room.

  I moved it to another room where there was no inflexible access, so I relied on the use of our wireless network.

  Now, the computer will not even find the wireless network.  When I have the help, it says "no available connection."

  In the center of the network, selecting wireless has a red X to the left of the green signal bars.

  At first, I wondered if maybe the computer was in a "dead point" in our House, but I've put a laptop beside him and he found the thin wireless network.

  Any help?

  Update: I tried system restore and tried to stop/resume knowledge network locations, but to no avail.

  Here is the info on my card wireless directly from HP site:

  Original driver for the solutions of Dualband network Atheros 802.11 Wireless Module a/b/g/n.

  I found what I think, it's their website, (http://www.atheros.cz/atheros-wireless-drivers.php), but surprise... they only model # s, my info does not.  Ugh.

• New just installed Windows Vista, unable to connect to wireless networks

  So a few months ago my laptop (HP Pavilion dv6) fell from my bed and the hard drive was messed up, so I'm a computer geek friend to replace my hard drive and put a new operating system on it, he had no activation key. In any case, after I came back it was working fine and I was able to use the internet by connecting to public networks, but every time I would connect to my computer it asked me to activate it. And finally I got so bored with being bugged that I decided to buy a new product key, so that he'd stop bugging me. So I bought a new Windows Vista Home premium operating system and when I received it in the mail, I installed correctly and put in the product key and active it and all that much good but whenever I try to connect to the internet that it says "Windows cannot find wireless networks" and when I click on "Diagnose this problem" he says "this computer does not have an install_ adapter of» configured wireless network. and then it gives me options troubleshooting that brings me at all because most of them consist in some way to update my drivers online, but I can't online my laptop to update! and all the other solutions are just confused. Is there a reason why my "driver" would stop working AFTER you install Windows Vista? Or is there some way I can uninstall the operating system and just use the one I had before? Help please!

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• HP ENVY 15-k163cl: HP ENVY 15 updated to Windows 10, now unable to connect to the network

  I've recently updated to Windows 10 with my laptop (from Windows 8) and remember, Windows 8 was working fine but now that I've updated for Windows 10, I can't connect to my home network.
  
  When I turn on my laptop, it is not automatically connect to my network and when I try to connect from the network settings, I get an error "Could not connect to this network" and I have to wait at least 30 minutes before it automatically logs. After waiting that it works, but my laptop goes to sleep or goes inactive for awhile, it disconnects again and I have to wait
  
  I connected via hotspot and it worked fine, but all of my other computers laptops HP connects very well and they are 10 Windows as well. Only this laptop is upward, so I guess it's a problem with a new driver.

  Hello:

  The only suggestion I can offer would be to install the latest driver for the Intel Dual Band Wireless-AC 3160 adapter - 802.11 and see if that helps any.

  The 2nd driver on the list is W10 x 64.

  https://Downloadcenter.Intel.com/download/25513/Intel-PROSet-Wireless-software-for-Windows-10

• I have a computer that is running Windows XP and a laptop running Windows 7 can set up a network between them for games

  Windows 7 64 bit, I can't find the ipx\ Protocol ' spx you need most of the games and is found mainly in Windows XP

  Computer running XP connected by cable to the router and the laptop by Wireless

  Hey Osama,.

  If your network contains computers running different versions of Windows, put all computers in the same workgroup

  I suggest you try the procedure described in the article and see if it helps.

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  Check out the link for more information.

  What it takes to set up a home network
  http://Windows.Microsoft.com/en-in/Windows7/what-you-need-to-set-up-a-home-network

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• I had a change in router and now I can not connect wireless network printer

  HP Deskjet 3050 has

  Windows 7

  I got a router change and now can not conect my printer on the wireless network. What should I do?

  Hi MaggieS, this support document provides suggestions for the correction of a reliable wireless connection. Try to work through them in the order of presentation and do not hesitate to post back if you are still not able to get connected http://support.hp.com/us-en/document/c02817031

  All the best.

• HP Laserjet P1102w: P1102w - change password and now I can't print wireless network

  Recently, I changed the network password on our router Cisco Valet and without realizing it seemed to me making the wireless printing stop workinig.

  I can always print to this printer via the USB cable, but it is not found on the wireless network.

  I guess I have entered the time of info the first network I created this printer, but I don't remember how I did it.

  Is there an easy way to reset the password that the printer uses, so we'll see on the wireless network?

  Thanks in advance for any info on how to get this working again.

  Replacement/change your wireless router try here.  Same thing to change your password...

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  However, if you have a gateway device, all devices in gateway (modem + router) are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• Unable to connect to wireless networks more. ("Windows could not connect to (SSID)")

  Hello!

  Something very strange is happening with my laptop (dv6-3060ee). Up to this day at noon, everything worked well, including the wireless network. So, I set my computer to Hibernate and came to the House of my parents. As I turn it on and try to connect to the wireless here, I can't. I get this error "Windows could not connect to (name of the network).

  I'm on W7 Home Premium 64-bit and the card wireless in an Atheros 9285 b/g/n (model number can be a problem, I have it does not properly check).

  Things to consider:

  -I don't know that this is not a router problem or hardware WiFi card because:

  1. I can connect to the router and get internet access on my phone and with the other computer normally.

  2. on the laptop, I can not connect to the network without wire inside W7, BUT with HP QuickWeb (this system of Opertaing before loading windows), I can normally connect to the network and access to internet.

  -Have you ever tried, without success:

  1 reinstall the driver for the wireless card / Unistalling the driver and install it again

  2. change the encryption on the router. (Even with no encryption I can't connect)

  3. of course, restarting the computer, turn off/on of the network card, reset the router

  So, I'm sure it's a problem with Windows. I did some research here and in other places and other people seem to have the same problem, but I couldn't find any solution.

  I didn't install any software today which could cause conflicts.

  So, can someone help me, please?

  Thank you

  Thank you for your help, but I'd already sorted.

  The problem was really the driver, an update had been installed by the HP update program and it makes the device stop working. This problematic driver was March, I can't remember the version number.

  I went to the Device Manager and pressed on "Roll Back Driver". Windows restored to an October/2009 driver, 8.0.0.238 version number, and now it works as it should.

• Unable to connect to wireless networks

  I was unable to connect to my wireless network. My network connection on my laptop is enabled and under properties, it says that it's maintenance correctly. However, under the command prompt it says that my ethernet adapter network connection is disconnected. I've alerted to check my connection because my wireless network list went from about 10 ads to 1. 1 on the list is a network installation of HP. I had not seen it. Any suggestions or tips to solve this problem?

  better to go to your vendor manufacturer's site and download the driver from there, if possible, otherwise will do you the needfull Sohail who was Khan network hardware professional VOTE A S HELP FULL IF this REALLY ŒUVRES HELP the OTHER FIND ANSWER FASTER

• How to create an XML Document and convert it into a string? (send through wireless network)

  Hello

  I am now able to post data to a web server by using Blackberry JDE (medical use).

  Now, instead of display the plain text, I would like to send an XML file.

  I am able to do it using this code on a 'normal ': Java application

  import java. IO;
  Org.w3c.dom import. *;
  Import javax.xml.parsers. *;
  Javax.xml.transform import. *;
  Javax.xml.transform.dom import. *;
  Javax.xml.transform.stream import. *;

  public class {XML
  Public Shared Sub main (String [] args) {}
  try {}
  DocumentBuilderFactory plant = DocumentBuilderFactory.newInstance ();
  DocumentBuilder builder = factory.newDocumentBuilder ();
  Doc document = builder.newDocument ();
             
  Root element = doc.createElement ("root");
  doc.appendChild (root);
             
  Child element = doc.createElement ("child");
  child.setAttribute ("name", "value");
  root.appendChild (child);

  Add a text element to the child
  Text = doc.createTextNode ("text");
  child.appendChild (text);

  implement a transformer
  TRANSFAC TransformerFactory = TransformerFactory.newInstance ();
  Transformer trans = transfac.newTransformer ();
  trans.setOutputProperty (OutputKeys.OMIT_XML_DECLARATION, 'yes');
  trans.setOutputProperty (OutputKeys.INDENT, 'yes');

  create the string of the xml tree
  StringWriter sw = new StringWriter();
  StreamResult result = new StreamResult (sw);
  DOMSource source = new DOMSource (doc);
  TRANS. Transform (source, result);
  String xmlString = sw.toString ();
  System.out.println (xmlString);
  } catch (Exception e) {}
  make error management
  }
  }
  }

  However, on the Blackberry JDE, many functions is not recognized.

  I saw the class DocumentBuilderFactory (net.rim.device.api.xml.parsers.DocumentBuilderFactory), the DocumentBuilder (net.rim.device.api.xml.parsers.DocumentBuilder) class and the interface of Document in the docs of Blackberry Java (4.2.1).

  So, I'm able to create an XML Document... but I don't know how to convert to a string?

  How can I do this? The TransformerFactory class doesn't seem to exist... and I did not find an alternative yet.

  At the present time, here is the code I use to publish data:

  String coord = lat + ";" + LNG; post data
  con = (HttpConnection) Connector.open (url); Open the connection URL
  con.setRequestMethod (HttpConnection.POST); POST method
  con.setRequestProperty ("Content-Type", "application/x-www-formulaires-urlencoded");
  out = con.openOutputStream (); display the results in a stream
  out. Write (Coord.GetBytes ());

  responseCode = con.getResponseCode (); Send data and receive the response code
  If (responseCode! = HttpConnection.HTTP_OK) {}
  System.out.println ("HTTP STATUS CODE: 404"); error
  } else {}
  System.out.println ("HTTP STATUS CODE: 200"); successful
  }
  If (con! = null) con. Close; close the connection to the URL

  As mentioned, rather than display a string with a delimiter between each value (there will be a lot more than two values finally), I would like to publish an XML.  It will be more "elegant" and easier to parse by my code on the web server.

  Maybe I don't have to convert it to a string?

  In other words, how can I convert my XML Document to send it via the wireless network?

  Thanks for your help!

  TransformerFactory does not exist in the BlackBerry API.  As far as I can tell, you need to implement yourself.  You can do this by walking the DOM and the output of channels.  They have an example of the market of the DOM in the XMLDemo, but they view as fields, you just need to write strings.