Impossible to install standalone vista sp2 on my hp Pavilion

Similar Questions

• error code "IMPOSSIBLE to INSTALL" of Vista sp2 0x8e5e03fa

  I tried to install sp2 once and got the error code "UNABLE to INSTALL" 0x8e5e03fa. I have loaded the "Fixit" program, run the program, and he says that he solved the problems, no problems that I have seen.  I tried to reinstall sp2 and got the same results. I installed SP1 and have checked that start/computer/properties. I have a HP Pavilion dv6000 laptop with a core duo intel CPU T5450 1.66, 1.67.  32-BIT OPERATING SYSTEM. I down loaded the only settlement sp2 version. Now on a side note for the past week, I have not been able to print any pdf files, saved on hard drive, or via a browser, IE8 or Mozilla. If one affect the other?

  Suggestions?

  montyrt,
  Try the points following and post back with the results and the information requested by PA Bear.

  Boot from your PC and let in a minimum of State boot when you run the following tools.

  Disk error checking

  System File Checker

  The system update tool

  Then download the SP2 and run your office installation.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Windows Vista SP2 due to error code 0 x 80070490

  Original title: conclusion it is impossible to install the Vista SP2

  Hello. I'm trying to update my parents with Vista SP2 computer, but it's a disaster. It is a 32-bit operating system. First of all, I tried to install it with windows live update but got the error code 0 x 80070490. Then I tried to download it manually from the Windows Download Center, but this has led to the same problem occurs. I then removed all virus protection programs and tried again, but it still doesn't work. I then downloaded the Windows Update Readiness Tool 947821 KB but when I try and install it it freezes for hours constantly and will not install. I think of anything else to do and I was wondering if anyone can help. Thank you

  Hi CVinaccia,

  Follow the steps described in the article below, dealing with a similar issue

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

• Ask Windows Update to install the Vista SP2, which was installed years ago and won't let me install Live Essentials for the same reason.

  Windows Update is now always ask to install the Vista SP2, which was installed years ago. When you try to install through Windows Update, it concludes the installation like ok, then once again it shows in Windows Update. When I try via stand-alone, it is said that SP1 is not installed. Of course, it is. In any case tried to reinstall and he wrote is already installed. I'm sure I installed both SPS long ago, but none of them show in the updates installed. It's probably something in the registry. Properties system shows SP1. Ah, I use Vista Home Premium 32-bit.

  Hello

  Thank you for your response.

  -What program did you use to increase performance?

  I suggest you please uninstall service pack 1, and then install both service packs.

  Method 1: Please follow the steps described in the article, and check if that helps.

  Note: I would recommend the first backup your information and other files External drive and perform operations.

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

  Method 2: Installation of Service pack 1 and service pack 2.

  Windows Vista Service Pack 1 all language standalone (KB936330)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=910

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2 - stand-alone version ALL languages (KB948465)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=15278

  For more information, please visit the links:

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Let us know if it helps!

• 80070490 error code when you try to install windows vista sp2

  OK JUST LISTEN UP GUYS I REALLY REALLY NEED HELP!

  OK to start with I have a 32-bit with sp1 operating system.
  I need help, try to install windows vista sp2. I tried for ages now to make it work, but I quit so I hope you can help me.

  It comes up with error code 80070490 and it says get help with this error so I click it and it says I have to insert a windows dvd?
  I HAVE A DVD OF WINDOWS, SO IT WON'T WORK

  SOMEONE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  ITS REALLY ANNOYING
  

  Hello

  1. who is the antivirus installed on the computer program?

  2. What are the steps you tried to solve the problem?

   
   
   
  Download and install the update the system analysis tool
  80070490 error when you install Windows Vista SP2 or Windows Server 2008 SP2
  http://support.Microsoft.com/kb/976920
   

  Search for the error message in the event viewer.

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps.

• Not to install Windows Vista SP2 error Code 80070005

  I tried to install Windows Vista SP2 32 bit and I have SP1. When it is done install says it failed and it gives me error Code 80070005. And I do not have enough disk space. Any suggestions?

  Hi, GregDaSpider,

  Try the resolutions listed here:

  0 x 80070005 access denied. You are not allowed to perform the requested operation.

  http://support.Microsoft.com/kb/816731

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update

  http://support.Microsoft.com/kb/968003

• Error 0x8007045D when you try to install Windows Vista SP2

  Hello

  Currently I have Windows Vista SP1 and want to upgrade to service pack 2. When I try to do the update of Windows, I get "error (0x8007045d) Error_IO_DEVICE. I also tried to install it in safe mode, I get the same error message. After having traveled a bit on the internet, I found that it is probably because my HDD is damaged... so I run the chkdsk program...

  The chkdsk program stops at 16%... Step 4 of 5... When 85785 files off 300000something files are done... and it does nothing more. It keep running like this all night, it goes no further.

  Does anyone have any suggestions on what I need to do to successfully install Windows Vista SP2?

  Thanks for your help!

  OK, I started the computer with the Windows CD and I ran chkdsk /f at a command prompt.

  Chkdsk /f found errors it corrects.

  I ran Chkdsk/r... .he got stuck after scanning 85763 files... near the place, he would always get stuck (85785 files)... so I guess it's the same file that crashes chkdsk.

  The good news: I still have a functioning computer.

  The bad news is that I ran the SP2 from windows update in new safe mode and it didn't work... I'm still stuck with my problem.

  I have an extra hard drive... that I ordered from Dell for my girlfriend's computer, his computer died before she could use the player, but it is larger, then the drive of your computer and it is brand new... the only downside is that the player has been implemented for the computer of my girlfriend (pilots and other things) and does not work in my computer. I guess I'll try to format that drive to make it work in my computer... it should fix this and then bad SP2 remedial power very well.

  I guess I have no choice.

  I suggest to remove avg (uninstall) then try sfc/scannow then chkdsk /f several times. a few times, they need more going to make things more

  Microsoft security essentials is a better a v for not update couseing problems.

  You can allways put avg in the back.

  not having is not enouph to free space for temporary files can couse problems too.

• Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  My checksur.log said

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6002.22441

  Version 9.0 package

  2011-06-29 15:32

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: nam

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Hello

  These should help to resolve the problem:

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ==========================================================================

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Impossible to download and install the Vista SP2

  original title: I was running vista sp2 due to virus I had to do a system recovery, it brought me back to sp1 now I can't download sp2 noor machine windows 7 check

  I can't download sp2, auditor of windows system 7, etc. Have downloaded a lot of patches and they have installed, but cannot download sp2

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  It will be useful.

• Cannot start Windows after trying to install the Vista SP2

  I just tried to install Vista SP2 and now whenever I try to turn on the cpu it gives me a blue screen and restarts. It does allow me to start in SafeMode either. In addition, it seems to be impossible to find my restore points. I was able to stop the screen using the F8 menu and it gives me this error on the blue screen

  STOP: 0X0000007E (0XC0000005, 0X81C223BB, 0X803998F4, 0X803995F0)

  For some reason, when I go to the cmd prompt to advanced troubleshooting guide, I can do, he says that I am the X and not the C drive, if that has something to do with my restore points does not.

  I tried to get the menu of the restoration on C manually through C:\windows\system32\restore\, but nothing was there.

  Any help would be appreciated. I will not lose rather all my data in a reformat.

  Thank you
  Matt

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you installed SP2?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  
  0X0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  A system thread threw an exception who did not catch the error handler. There are several individual causes for this problem, including the hardware incompatibility, service driver or defective peripheral system or software problems. Check (EventVwr.msc) event viewer for more information.
  
  Source: http://aumha.org/a/stop.php#0x7e

  
  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:
  
  0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred. [emphasis]
  
  Source & more: http://msdn.microsoft.com/en-gb/library/ms795746.aspx

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 80004005 by installing Windows Vista sp2 x 64

  I tried to install this updated 4 x I read an answer in this forum which is similar to my problem and I tried the solution, but it would not install.
  I noticed something this last time because I saw the installation process. We all know that the system can reboot several times during the installation. During the 3rd part of the installation, the user account screen asking for the password. However, I had no time to type the password in it, because it jumps to a screen saying that the computer is to install the updates. Then, when the updates for the 3rd party are finished 100% it is said that they can not be installed. Then the computer uninstalls them and puts the computer in its preinstallation State. Is it possible, because I didn't have a chance to enter my password, the computer refuses to recognize me as the administrater during the last part of the installation.  Therefore, maybe stop the installation process of the necessary changes and it returns to the previous state. I'm probably grasp at straws here, because I have never had a problem like this before. Does anyone know what I need to do to remedy the situation?
  I don't know if it's important but I installed another update after the 3rd time. The update has been successfully installed and working. So I thought that everything was ok and tried to install sp2 again. It's the same thing. Why can I install other updates, but not as an individual? Other than this problem installing, the computer works pretty well. I didn't notice a slow or something else for the past two weeks. I'm puzzled.

  I have an (office) Packard Bell imedia x 5705 Intel Core 2 Quad 4 x 1 GB (RAM) 2.33 GHz
  1000 gigabit hard drive
  Type system in Windows Vista Home Premium 64-bit
  Graphics card: NVIDIA GeForce GT130

  This computer is connected to 2 other computers with a D - Link KVM Switch. One of the other computers has a 32-bit system Intel dual core Vista sp2 running without any problem. They also share a router for internet access broadband.

  Should I try to reuse the recovery disk? I don't want to make things worse.

  Thank you, Debbie - the technical support for all your help.
  I went through all the steps mentioned above in the correct order. However, they have not corrected the problem.
  I used the Packard Bell Recovery Management options and restore my computer to its original state. Then I installed all necessary updates including sp2. I was not activate the preinstalled anti-virus software, or change programs or settings up to that later. That's the good thing. Packard Bell Recovery Management also creates a separate file for all personal files. Thus, when the computer has been reset, I still had my personal files.

• SE error message: "elements not found" when installing Windows Vista SP2

  Original title: error please help

  I am running vista and currently have service pack 1 to install most programs it said I must have service pack 2, although I tried to install manny time either through the window system update or if a download on the microsoft site and I sill get the messege even while trying to install "no items" and an error code weird, I searched and google ect but don't watch until someone could please help me with this as a carnt install the basic things I need for example: microsoft word-. -.

  Please help before I end up spending 200 + just to buy a new Tower

  Hi jasonv123,

  You can read the following article and try resolution 2: run the system update readiness tool and check if you can install Vista SP2.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Errors after downloading and trying to install on Vista SP2

  Running Vista Home Premimum, SP1 64-bit.  Downloaded the SP2 for Vista and get this error - ERROR_SHARING_VIOLATION (0 x 80070020) I turned weird my program McAfee and it still gives me the error.  Any help?

  TaurArian said. See also...

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [Error 0 x 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Free unlimited installation and compatibility support is available for Windows Vista SP2 issues until August 30, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Do not install Windows Vista SP2

  I tried all the suggestions on trying to get the Vista SP2 install, but still get the error 800F0900.  Now, my IE crashes, so really try to get everything back to day.  Help, please

  Free unlimited installation and compatibility support is available for Windows Vista SP2 questions until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After installing the Vista SP2, IE 8 does not work well.

  After installing Vista SP2, IE 8 under my.live.com does not work.  The pages do not FLOW RSS download, links on the page at the top are not active and usually IE has out crapped.  I went to run a complete Internet security suite uninstall Trend Micro and put it in a plain Jane anit-virus program.

  I would like to keep the functioning of IE8, but switch to FireFox, if I need to see my RSS STREAM or do some serious web browsing.

  In addition, Live Messenger is no longer connect either.

  Is there a way I can safely roll back my system to SP1?  I can't live without Vista SP2.

  Hi Geekster,

  Please use the forum for Support of Vista,

  IE 8 is not a part of Vista SP2.  You can remove SP2 without removing IE8.

  Here are the steps to uninstall SP2
  Method 1: Uninstall the service pack of Windows Vista by using the programs and features item in the easiest control panel to uninstall a service pack for Windows Vista is to use the programs and features in Control Panel. To uninstall the service pack of Windows Vista by using the programs and features in Control Panel, follow these steps:

  1. Click Start, type Appwiz.cpl in the Start Search box, and then click Appwiz.cpl in the programs list.
     If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  2. Click view installed updates.
  3. Click the service pack that you want to uninstall, and then click Uninstall.

     If you don't see the option to uninstall for Windows Vista service pack in the list, go to method 2.

  4. Follow the instructions that appear on the screen to complete the uninstallation.

  If method 1 does not allow to remove SP2, try different method in this article:
  http://support.Microsoft.com/kb/948537

  Let us know if this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.