How to use 88XX phones Cisco Unified cm 8.6.2

Similar Questions

• How to use or implement an ICS on my computer (or maybe Xbox) so that I can make calls using my phone VOI?

  My provider of VOI (BasicTalk) informed me that I could filter my phone via my computer using an ICS. My phone receives calls but I cannot be heard when I try to call. I live far, far in the glue... can't even get cell phone service and I had to get internet through flat (hughes aircraft). I mainly use the CAR phone as an answering machine... when a call comes in, I play back, the message, and then sink 25miles into our nearest town to get cell phone service and make my calls by cell phone. I have no other options available for the telephony service. It's obnoxious, but that's all I have right now. I knew that the CAR would work this way, but I decided that it was better than nothing. When I discovered that my son is able to use its earpiece via Xbox Live and has no trouble at all, I thought that there must be a way around this problem. So I called basic talking and they told me that it was no help... after that I begged for help, they finally checked around and advised I could use a VOI and gave me this address Windows. I found the site of ICS, but still don't know how to use the phone on this system... Any ideas or suggestions? Any help would be greatly appreciated!

  Hi Rhonda,

  You can, see the following Microsoft article and check if that helps.

  Using ICS (Internet Connection Sharing)

  Keep us updated on the State of the question

• Compatibility phone Avaya with Cisco Unified Communications Platform

  Hello

  We are currently a user all-Cisco on the side of routing, switching and network security, however, we are a user all Avaya on the phone, IP phone and voice communications.  I laugh with all the problems we had with Avaya and would migrate to Cisco.  My department head wants to know is it possible to have a Cisco platform manage all unified communications and voice mail on the back end, but continue to use the Avaya phones currently in place in each office, until we can replace in the coming years through attrition?  It is essentially a measure of cost that is the main factor in management are unwilling to make any changes whatsoever because of investment is already in the existing system.

  None of the Avaya endpoints are officially supported on Cisco CUCM, but if they SIP phones, they can be defined as 3rd-party SIP endpoints.  That being said you get far more features and satisfaction with phones Cisco CUCM, otherwise ask for another set of questions, and at that time there a seller will point to the other.

• How can I make iMessage on my MAC using my phone # instead of my e-mail address

  The habit of using my phone number of my iMessage on my MAC and it syncs with my phone and I could reply to all messages on the computer.  Now, since I updated my apple ID, it will use only my email address.  (The last time this happened, he went back, but I don't know how) How can I change using my phone #?

  You need to set up the continuity of linking your Mac and your iPhone for sharing messages - continuity of use to connect your iPhone, iPod touch and Mac - Apple Support

  BUT, the two devices must be connected to the same iCloud account using the same AppleID for connection.  You can not link devices using different AppleIDs.

• After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?

  After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?  Help, please.

  You can not

• I forgot my icloud user name and the password, my ID apple won't do me in my phone how to lay or clear everyhing so that I can use my phone again?

  I forgot my icloud user name and the password, my ID apple won't do me in my phone how to lay or clear everyhing so that I can use my phone again?

  https://iforgot.Apple.com/password/verify/appleid#! & section = password

• My iPhone 5 s a problem that the accusation itself decreases without using the phone, I changed the battery it is always the same and I put it in airplane mode it's always the same problem how to solve this help please?

  problem iPhone 5s load is reduced to

  My iPhone 5 s a problem that the accusation itself decreases without using the phone, I changed the battery it is always the same and I put it in airplane mode it's always the same problem how to solve this help please?

  Please help me anyone

• Qosmio F20-155: how to use BT to share files with the mobile phone

  Hello
  I HAVE TOSHIBA QOSMIO F20-155, BUT I DON'T NO HOW TO USE BLUETOOTH TO SHARE FILES WITH MY CELL PHONE
  PLEASE HELP ME

  Hello

  First a simple question: are you sure that your laptop supports Bluetooth?
  AFAIK the Qosmio F20-155 was delivered without the BT module.

  In addition, if you are not sure if the phone has BT then you can check the bottom of the unit. It should be placed a label BT if the Bluetooth has been installed.

• Hi, guys! My iphcone6 is icloud lock and now I can't use my phone, so how do I do?

  Hi, guys!

  My iphcone6 is icloud lock and now I can't use my phone, so how do I do?

  Need to unlock and start using it and if you can not unlock talk to the previous owner.

• How can I get the sim unlock card or carrier unlock t mobile USA, I use my phone in India and my sim card does not work and when I checked with the apple support, they said, it can be locked my previous carrier T-mobile USA, which is a solution

  How to unlock carrier T - Mobile USA, that I'm unable to use my phone in India as it says sim does not, I checked with Apple support they said previous carrier may have locked

  You will need to contact the carrier, it is locked to and follow their unlocking procedure. Only the carrier to ensure that it is locked can allow and process a request for unlocking.

• Liquid Z 3 How to use the small screen-receving-phone-call?

  Hello

  I would like to know how to use the small screen that appear in a case to receive a phone call.

  There are two types of screen wen we receive a phone call. I know how to use a larger. But not for the little ones. Aid for the small indicates that we have to drag the green phone symbol that I guess, but to fall on what? The manual doesn't explain it at all, it is not obvious!

  Thank you very much for your help!

  With "appellant float" activated, simply to press the Red or green button, no need to call, if the "small screen" is that of the attachment

• HP Officejet Pro 8610: Unclear Instructions online, using the phone fax configuration, how to print envelopes

  Terminology used in the instructions I'm not familiar with.

  Hi @chazz85,

  I'd be more than happy to help you with your configuration envelopes and printing of fax.

  Are there specific terminology that you want me to explain?

  Let's start with the implementation of the fax machine.

  The best market-well because it is in this document to set up a new Fax.

  For me to simplify this configuration for you, I would need to learn more about the installation of your home Tel/fax line.

  • Is he a dedicated phone line? Only used for faxing.
  • Or is it a shared phone line? Phone and Fax.
  • Is your analog phone provider (typical telephone lines) or digital? (Cable connection)

  If the row is shared;

  • You have the distinctive ring service? 2 numbers, same phone line that present different ringtone profiles to indicate the type of incoming call
  • You have an answering machine? An answering voice calls in the same phone number you use for fax calls.
  • You have voicemail? A subscription to voicemail service using the same phone number as the fax.

  The (Simplified) recommended configuration would be;

  1. Telephone jack in the wall (RJ11) connected to line 1 on the printer using the cable provided in the box with the printer

     Then, if any;

  2. Port 2 - EXT on the back of the printer connected to the answering machine (using a phone cable)
  3. Your phone will then connect on the answering machine (once again using any phone cable)

  Once I have more information about your setup I can help you further.

  Now for printing the envelope.

  I recommend the user to the 8610 Guide to show you how to correctly load an envelope. I copied the steps here for you;

  NOTE: If your printer has a second tray (tray 2), do not insert the envelopes for printing in this slot.

  1. remove the main input tray. Remove all existing paper from the tray.

  

  2. Insert the envelopes facing print down and charge according to the chart. Make sure that the stack of envelopes does not exceed the lower line of the marking in the status bar. For more information, see the diagram engraved in the status bar.

  

  NOTE: Do not load envelopes while the printer prints.

  3. slide the paper width guides in the tray until they touch the edge of the stack of envelopes, then re-insert the tray.

  

  4. remove the output tray extension until the planned paper size is reached.

  

  I need to know what program you are trying to print from. If it's Microsoft Word, I find this document print an envelope very useful.

  If it's another program, you can try the manual suggests.

  1 load the envelopes face to print down in the status bar.

  2. in the menu file in your software, click print.

  3. make sure that your printer is selected.

  4. click on the button that opens the Properties dialog box. Depending on your software application, this button can be called properties, Options, configure the printer, printer, printer or preferences.

  5. Select the appropriate options.

  • Under the layout tab, select Portrait orientation or landscape .
  • On the paper/quality tab, select the paper type appropriate media drop-down list in the area of selection of the status bar, and then select the appropriate, print quality in the quality settings area.
  • Click on the Advanced button in the paper/output box, select the size of paper in the paper size drop-down list.

  6. click OKand then click print or OK in the print dialog box.

  Please let me know if these steps solved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• How to use the session ip phone 9971 call from speed dial

  Hello

  How can I use IP phone 9971 session call buttons to be used for line speed dial or intercom?

  Your help will be appreciated.

  Thank you

  You can not, you can only assign one of the 6 buttons line as another option, the session call buttons are dedicated to call the session.

• How to use Layer 2 Ports on the Cisco 1841 router switch

  Hello

  I use the Cisco 1841 router with a single port layer 3 Fe0 and 8 Ports switched.

  I gave the IP on the Fe0 port which is connected to another router.

  Now I don't know how to use Layer 2 of the router switch ports.

  I tried to make one of the port as a Port of access by switchport mode access and connected my laptop and the same subnet given IP, but I can't ping my Fe0 IP port and vice versa, as I am also unable to ping my laptop router.

  Can someone explain to me how to use these ports on layer 2?

  Hi Muhammadatifmasood, take a look at the link below, I'm sure that you will find it useful.

  https://supportforums.Cisco.com/discussion/10919631/how-enable-routing-b...

  BenSamayoa

• Cisco Unified Video Advantage connect not not Cisco IP Phone

  Hi, I have the following text:

  • CUVA 2.2.2.0 installed on windows 7 x 64.
  • UC560.
  • IP phone 7965.

  The first time I installed the program, everything was ok, didn t try the video feature, but it was connecting and recognize.

  Now I'm with another phone, also a 7965 but CUVA said that it is not connected. He also says: "cisco unified video advantage can't connect to cisco ip phone" and asked him to contact the system administrator.

  It has been a long time (about 3 weeks) because I checked the last time he was working on the previous phone, I'm not sure if it's because I'm on another phone now, but I do not.

  Any ideas?

  When you go to CUVA-> all show the driver see CDP?

  Have you tried to close your wireless adapter or set a higher metric?

  Got a GPO that would restrict CUVA on windows firewall?