How update the firmware SRP541w?

Similar Questions

• How update the Firmware on my router?

  I downloaded the firmware file of my router (WRT54GS V7) Linksis wireless because I have problems with the router itself reset while I play, but I can't understand how to install it.  The default program that wants to open the firmware file is VLC (a media player).  What should I do?

  Edit: I'm trying to re - download the file firmware to see if that helps, but now the download links aren't working yet... What is happening here?

  Edit 2: I also try to read the FAQ because it seems that they already have an answer to my question, but the answer page is not loading either.

  The site is under maintenance or something?

  The linksys Web site works fine now. If you still have problems, you must connect the computer directly to the modem for download.

  You should not open the firmware file that upload you to the server. Do not open it with any application. Do not change under any circumstances. All you have to do is to download the file and upload it to the router through the web interface. Download the firmware on the linksys site. Save it to your desktop.

  Then, open a browser and go to http://192.168.1.1/ which is the web interface of the router. The default password is "admin". Search for the function of the firmware upgrade. It's usually somewhere on the Administration tab. On the firmware upgrade page that you see a browse button to select the file to load on the router. Select the downloaded firmware file. Press the upgrade button.

  Do not interrupt the download. It is recommended to disable any firewall or anti-virus while accessing the web interface for the firmware update. The process should not be interrupted. Otherwise you can find yourself with a router of bricks.

• How update the firmware NEX-6?

  Never updated firmware myself. How this is done?

  You must download the necessary file for the firmware update, then run it on your computer, while the camera is connected via a USB cable. The steps on how to perform this procedure will vary depending on your operating system, and you can refer to the NEX-6 assistance page for more information.

  If my post answered your question, please mark it as "accept as a Solution.

• USRP RuntimeError: Please update the firmware and FPGA images for your device.

  Hello

  I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.

  2009 LabVIEW and NOR-USRP 1.1

  When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627

  "niUSRP Devices.vi finda length or configuration error has occurred."
  Code: 1440
  Details: RuntimeError:
  Please update the firmware and FPGA images for your device.
  See application for USRP2/N-Series notes for instructions.
  Compatibility of the Protocol expected number [7-11], but received 12:
  The version of the firmware is not compatible with the host code generation. »

  I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.

  Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.

  Can someone help me with this problem please?

  With respect,

  -Sigurd has.

  Hello Sigurd,

  The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.

  You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.

  This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP

• How can I update the firmwar in the tv 48T5445DG?

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T544DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder update by Sam currend?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T5445DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder currend update satellite (Astra / Hotbird)?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Thanks for your help

• Update the firmware on PowerEdge R815 for H700 - how?

  I want to update the firmware H700 integrated into my new 12.0.1 R815 - 0091 to 12.3.0 - 0032.

  My first thought was to start from Systems Build and Update Utility with a copy of the am630_suu_a00.iso that I had downloaded, concatenated, and copied onto a portable hard drive connected to a USB port.

  It worked well for the ports of Broadcom, but when he reached the R815 BIOS and firmware H700, he'd say he was going to update and then say that it would restart (confusingly telling me to 'remove all media startup' but I'm pretty sure that the DVD SBUU was supposed to stay, since the instructions say to keep start-up it until all updates are done). However, the machine simply restarted. It did not save pending updates to a partition so he could update at the start, and he did not ask me to insert a USB key for storage (implied by the text that flashes quickly by on the screen after you click Apply). I found myself on-screen SBUU once again, and firmware updates were not managed.

  Finally, I gave up this approach. I thought maybe I could run the updates directly on the SUU volume but I had installed Windows Server 2008 R2 x 64 and SUU files run apparently only for x 86.

  So I installed the x 86 version of Windows Server 2008 and now I can click on suulauncher.exe and run it as an administrator. SUU 6.3.0.267 launches and usefully shows me the updates of the firmware, I need, and I can choose them. But when I click on the button to update and I confirm that these updates will happen, absolutely nothing happens. You can see a screenshot here where I'm about to click on: http://imgur.com/R8jzm to reading online, I think that a progress bar is supposed to be coming up next. I looked at the C:\Dell\suu\support.log file and it says the following:

  FINE: com.dell.suu.cm.BundleProcessor.processUpdateButtonEvent (SystemBundlePath) is G:\.\repository\PER815-WIN-R258158. XML

  WARNING: com.dell.suu.cm.CustomBundleXMLGenerator.generateBundleXML)

  An error occurred during the transformation of this when creating the custom XML part

  I thought that maybe I had a SUU image corrupted, so I re-extract ISO but got the same error.

  Then I thought, why not just run the stand-alone package update RAID_FRMW_WIN_R269685.exe (using run as administrator). It's very encouraging, but then he says "This update Package is not compatible with the configuration of your system." Why is it not compatible? I have a built-in H700.

  I am clearly out of my League here. Others really spend several days trying to update the firmware? I'm leaving on the parts where I create a bootable USB key with BACK and try to run the DOS version of the update of the firmware MegaFl.exe, only to discover that the FW872I.rom file is not found, and the parts where I break down crying.

  Any advice would be greatly appreciated. Before go me crazy.

  was there a particular reason that you have run RAID_FRMW_WIN_R269685.exe? You must run RAID_FRMW_WIN_R269684.exe instead.

• Problem with updating the firmware on 40TL838G

  Hello

  I am very happy owner of Toshiba 40TL838 screen (G).
  Recently, I tried to update the firmware on it.
  Next steps in the user manual I tried to do the update of the network. "No new updates available" poped upward. I goggled solutions and came across a manual update of the USB.

  I downloaded the firmware recent Telefilm, coppied to usb (4 GB, formatted FAT32).
  Following the online instructions I have unplluged TV power.
  Plugged in USB. Connected TV to the power and he lit. And nothing happened.

  After 20-30 sec info abut being plugged usb pop uped question I wish to put on the Media Player.

  Firmware: 6.1.0M.1
  MBoot: 00480288
  MFC: 240226

  Any ideas how to proceed with this case.

  Concerning
  SLim

  Hello

  The firmware can be downloaded and updated via the network.
  But as far as I know you need to change the drive media or software update settings can not be started.
  Media Player-> USB media player-> installation
  Then press left or right, and select THE
  Now we turn on the TV
  Insert the USB key containing the firmware and after inserting the USB firmware update information appears on the screen.
  Then choose YES

• EliteBook 725 G3: Failed to update the Firmware USB controller of Type C

  My laptop is one of the first to come out of the Assembly line and came with firmware 1.02.

  1.08 BIOS that is out there, so I tried to update Windows 7.  It took time, but it's over and the tool said to restart.  That's all he said I remember.

  Upon restart, it started giving beep codes.  I don't remember who it was, but it was something like 1 long 2 short or long 2 2 - short.  He kept with him for awhile and I got sick of him, so I pushed on and held the power button for the kill and then restarted.

  This time, he got in the BIOS, who says she has been updated controller firmware USB Type C of v12 v13.  This FAILURE and gave me the option "restart and try again."  I took that, but he was never retried.

  I felt comfortable with that, so I flashed the BIOS 1.08 again, this time in the BIOS using a Flash DRIVE (\Hewlett-Packard\BIOS\New\N73_0108.bin).  He went through much faster than on Windows, and in the end, he actually warned me that the machine may beep for awhile after restarting.  Uh, thanks for the warning, now it's too late.  Why doesn't Windows Update program gave me the same caveat useful?

  In any case, the SystemRoot machine, but he did nothing to try to update the firmware of the controller USB Type-C.  I'm guessing that he defined an indicator saying somewhere that we are already at 1.08, so there is nothing new to do.

  When the BIOS Setup is emptied using BiosConfigUtility.exe, it shows the USB Type-C controller firmware to be even 00.12.

  So, how to update at 00.13?

  Posted March 31, 2016 1.11 BIOS update corrects this problem.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7815285&swItemId=ob_163435_1&swEnvOid=4192#TAB4

• I have Win XP Pro aiinstalle and work for a while, I updated the firmware CD, now, it's asking to reactivate windows.

  I've updated the firmware CD now it asks for a product key, I used this laptop for severla months, I get the message that the key has been used too many times and you need a new key.  I bought the laptop from a company farm selling off its old stock.

  Try what it sounded just like it has been reinstalled several times.
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.

  I hope this helps.

• Once I have updated the firmware, can I go back?

  Quick question...

  I have a player who's a little older. It's a 4GB running version V01.01.11A.

  If I go ahead and update the firmware to version the most recent, if something is wrong, or I don't like the way it is, how hard is to return to V01.01.11a?

  I'm usually the one who said, "if it does not work well, why mess with it." But I thought I'd go ahead and update this older drive.

  Thank you!

  Yes, you can "" downgrade firmware very easily. But you must have a copy of the firmware to do so. You can use the software of Sandisk was updated, because it installs only the new firmware, it can find. You need to do a manual installation (there are indications in the "Sansa Fuze Firmware Update" section, just use the older firmware instead of the firmware related to the topic).

  Problem is I don't know if there is a link anywhere on the Board for your current firmware. If this is the first production firmware (yours perhaps,.11 is old enough), Sandisk never displayed, only the subsequent updates. And there is no way to extract the firmware of your player to use as a backup if you decide to downgrade.

• 'Fatal error 65' when you try to update the firmware of the printer

  The printer firmware update fails with 'error 65' displayed on the screen of the printer.

  I have the HP LaserJet Pro 200 M276nw MFP color, just one month outside the window of the guarantee. Downloaded the latest version of the driver M270_colorMFP_Series_FW_Update - 20140718.exe and followed the instructions on how to upgrade.

  The computer running the installation displays no error and I get the face smiling at the end. However, the printing configuration always displays the old driver from 2012. Also, the printer display does not progress as stated in the manual of stable employment. On the contrary, at some point it displays 'Error 65' and then restarts.

  How can I update the firmware?

  Please try to use the 20140521 version only, I currently have audit whitin HP why 2 different firmwares are posted and will let you know once I'll get an answer... for now please DO NOT try to install the 20140718 version...

  Shlomi

• Dell XPS 15 SSD NVMe slow after updating the firmware July 2016 and papillonné CPU (Core i7)

  Edit: 9/2: title change intended to reflect issues of CPU throttling and discussion (second half of the thread)

  I noticed a huge performance drag after updating the firmware and drivers of my XPS 15 9550. The update took place August 4, 2016.

  Performance of my usual applications (Chrome, development tools and IDE, etc.) is dramatically lower. In general, I would say that things take about 3 times as long to arrive. I checked the CPU (normal), but also memory consumption (as normal) to discover that the problem is with the SSD drive.

  On this laptop: 500 GB NVMe thnsn5512gpu7 NV (toshiba). Attached are the results of a benchmark with AS SSD. All write speeds are appalling, to say the least... that explains a lot, but I have no idea how to solve this problem, and whether or not it really relates to the latest firmware + update drivers provided by Dell.

  (Note: I checked the BIOS, it seems that the SSD is currently configured in RAID mode.) Never touched this option before.)

  Any idea? Other affected users in a similar way. Thanks in advance.

  

  I managed to get the performance back by going to the properties of the disc and turn off windows write cache flushing heat. The two boxes should be checked. Write speed then went to about 1400 MB/s.

• update the firmware on 1815dn

  Dell technical support had me download 3 files to get win7 manual and correct drivers yesterday. One of them has proved to be a updated firmware for the printer.

  after update, the printer screen showed (initialization of the system) and wouldn't do anything. technical support is not smart enough to know how to perform the update of the firmware, I thought about it this morning on my own. printer off and press and hold the x button (cancel) all by turning on the device. the printer then entered in download mode, installed the update of the firmware and now works again.

  bigddv,

  Thanks for the update. I remember that some laser printers, you need to update the firmware in steps, where this information is needed.

  You shouldn't go to firmater 01 to 04 firmware, without having to first install the 02 and 03.

  Rick

• An error occurred during the update the firmware.

  Hello, I have an orange light flashes on my Airport Extreme device indicating that a firmware update is available. However when I tried to update I had the following error every time: "year error occurred while updated the firmware-6, 721. What should I do?

  Thank you in advance for your help! ... soon a

  If this is not the case, already, connect your iMac to AirPort Extreme with an Ethernet cable. On the iMac, make sure that Ethernet is enabled and disabled WiFi (or next to). Then try to use the utility AirPort again try the update of the firmware.

• An error occurred during the update the firmware. -16

  I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I'm not sure what is the problem...

  Your airport is now not working? That is, the reset did not work.

  OR

  It doesn't have to be upgraded after several attempts?

  The airport is connected to the network as usual? You have full internet access through the airport?

  What model is the most convenient airport?

  The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

  What is the current firmware?

  If it is a very old model, they can sometimes give wrong if it has never been updated.