HOWTO IOS upgrade the access point (router 881w) internal

Similar Questions

• Receiving the message "Wireless association failed because Windows did not receive response from the access point or wireless router" _

  My laptop was working fine yesterday, but when I started it today I get the message "Wireless association failed because Windows did not receive response from the access point or wireless router.

  I can see my network and I can connect to the internet using my desktop pc, but just to make complicated I can't even connect to the network when I plug the ethernet cable into my laptop.

  I think it might be a driver problem, but I have no idea how to solve this problem without access to the internet on my laptop.

  I'm running Vista and my wireless router is an Atheros AR5009 809.11a/g/n

  I need step by step instructions on this Yes please treat me like a fool!

  Thank you

  Laptop would not work at home thus concluded that it was a BT Broadband do not issue my driver (despite BT telling me the opposite last night)

  After the call to a fantastic Lady in BT it's all fixed and thanks to Jack I now know a lot more on connecting wireless to my laptop!

• Error message 'Please select the access point or wireless router to set up' when you set up a network

  Original title: set up a network.

  I want to create a wireless network for the games, and when I click on the network. A screen comes written on this "Choose the access point or wireless router to set up" and that "it might take 90 s for devices reconfigured to appear on your computer.

  But no device never appears below it, even after 90 minutes.
  Please help me with this.
  It was so easy in windows 7.

  Hi Manas,

  What is the brand and model of the Wireless Router/Access Point?

  Given that the issue has not persisted in Windows 7, there is a chance that the wireless router/Access Point is not compatible with Windows 8.

  Please check the links below on the implementation of a network.

  http://Windows.Microsoft.com/en-in/Windows-8/Setup-home-network

  http://Windows.Microsoft.com/en-in/Windows-8/what-you-need-Setup-home-network

  http://Windows.Microsoft.com/en-in/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8

  http://Windows.Microsoft.com/en-in/Windows-8/Add-device-or-PC-to-network

  Answer please if you have any questions.

• How can I get my name from the access point?

  Since I bought a modem Arris 228 G and spent my 2 wireless, printers Canon WIFI unable to connect at Optimum!

  Canon said to contact my router creator (Apple Airport Extreme) for the name of the access point get return wireless, WI - FI printers.

  Help, please.

  W.W.

  (Mac Pro 10.6.8)

  The name of the access point is simply the name of the wireless network that provides AirPort Extreme.

  You can see the name of your wireless network by clicking on the WiFi icon at the top of the screen of your Mac and by checking that the name appears.

  

  There will be a check mark next to your wireless network name.. which is also known as a wireless access point.

  It would be the same name that you had before... unless you have changed some settings on the AirPort Extreme.

• Cannot associate the Access Point

  I just bought a WUSB54GSC wireless adapter and try to connect to my wireless router, a WRT54GS2, but it gives me a message saying "can't associate with the Access Point.  I tried several times and tried to reconfigure the WEP key, just in case I screwed up somehow and get this message.  I tried the network unsecured neighbor (signal low, of course) and he gave me the same, too.

  What I know:

  (1) the problem is not with any part of my network, either from my lines (DSL), (ADSL) modem or a router, because I use a wired network right now with no problems and several other devices in my house with built-in WiFi to connect wireless to the same router with the Setup even very well.

  (2) the problem is not that I messed up the WEP key.  I rechecked it multiplies and even went to the router via an Ethernet cable to check what I entered compared to what he shows me, and they have a perfect match.  In addition, as previously stated, various WiFi compatible devices in my house using the same WEP key to connect properly.

  So, I don't understand why I can't connect what either.

  First go to device manage and check if the adapter is installed correctly or not... ? If it is installed correctly then, right-click on the utility of linksys (green square) on the toolbar and click on 'Use Windows to configure' and click on 'yes '...

  Now, if you have Windows XP... Click Start and goto the control panel and double-click on network connections, right click wireless network connection and click View available wireless networks and select your wireless network and click on connect... Now, it will give you the opportunity to put the network/wep key, make sure that you enter the correct network key and confirm... It will connect...

  If you have Windows Vista... Click Start > Control Panel > Network and Sharing Center > click on connect to a network, select your wireless network and click on connect, it should ask for your key/password network, enter the network and password correct key and click on connect... It needs to connect... Once you're connected, you must restart the computer, it needs to connect to the Internet...

  Also try to change the wireless channel of the router to 11-2, 462 GHz and then try again...

• C4780 wireless printer cannot find the access point

  I have c4780 wireless printer.  It will print fine using the usb connection, but has never printed wireless.

  PC operating system is Windows Vista.  Wireless router is the linksys WRT54G.  The printer does not see the access point.  The security mode of the router is WPA Personal.  I have a unique SSID.  ISP is Timewarner Roadrunner.

  How do I get this to a wireless connection?

  Try this firmware update.

  In addition, sweat you are broadcasting your SSID and not using MAC filtering.

• Mobile data does not and the name of the Access Point settings are not available

  I don't have a mobile data, not even the small up and down arrows or letters beside the sims signal bars appear.

  I tried all the troubleshooting settings and different type of network, the airplane mode is off, mobile data are no limit, no power save modes are on. Phone is dual sim so I tried on the two sims and tried to disable the other sim and changing the sim slots, both sims are loaded with a credit of data that works in other android devices. WiFi works fine. Factory reset does not help.

  There is that one thing that I can't not try troubleshooting. When I select settings > more > mobile networks > access point names, it says

  "Access Point name settings are not available for this user.

  Maybe if I could put APN I could get mobile data. How can I do or how I can try to get mobile data to work?

  Phone's Xperia M4 Aqua E2363 with build 26.1.B.2.102 thanks if you can help

  This text is a bit misleading, which is something that I have forwarded internally as your comments.

  If you have no NPP stored the phone displays the text "the name of the Access Point settings are not available for this user" even if you use the owner account and have access to the settings.

  Try to download the automatic settings from settings-> more-> Internet settings and see if that helps.

• Monitoring of the Access Point

  Dear all,

  I have WCS and WLC with 90 LWAP Access Points. I joined the WCS and WLC and I am able to see all the LWAP in the GUI of WCS.

  The requirement is, when ever some LWAPs are down, I want to get an alert somehow to report it. Now, without knowing how to do it, I just saw the total quantity and if some LWAP is off, I find it difficult to find one that is broken.

  Can you please suggest me the appropriate method to get the solution

  RBK

  Hello rbk,.

  for simplicity, you can try to change the name of the access point to their specific locations. draw the map of the ap. Once they are in offline mode you will immediately see that ap is declining and where they are, first of all by the names of ap, then by their current location.

  It's better to do before setting the each AP. but still feasible if the AP is already set. you will have more work, however.

  have your floor plan ready with the exact locations of the AP. Note the mac address you set the AP once the ap registers with the controller, you can match with the floor plan and change the name of the access through its exact location point. example Bldg1-GF-AP01-lobby, Bldg1-GF-AP02-Hall, Bldg1-1F-AP01-reception... etc...

  import map in the WCS and assign the accordngly to the ap.

  You'll know exactly which ap is turned off and where exactly.

  hope this helps!

• Could you let me know on 3850 catalyst to connect to the access point status?

  Dear experts,

  The 3850 catalyst to connect the Access Point.
  I checked the OCC, but I don't know to connect the access point directly or indirectly...
  Is that it must connect the Access Point to the 3850 catalyst directly?

  Could you let me know on 3850 catalyst to connect to the access point status?
  I want to know the ORC page on this subject.
   
  Best regards
  Takuro

  Hello

  See below

  http://www.Cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/qa_c67-722110.html

  Q. does the Cisco Catalyst 3850 in charge of indirectly connected access points?
  A. No. switch Cisco Catalyst 3850 will always take the CAPWAP tunnel locally. Pass-through or indirectly connected access point mode is not supported at this time. Note that a model SFP Cisco Catalyst 3850-12 or 24 channels can be a good choice to act as controller of mobility for a stack of switches Cisco Catalyst 3850 ending CAPWAP tunnels locally.
  HTH
  Rasika
  Pls note all useful responses *.

• Updating of the access points in the environment, the models?

  I'm going slow in the environment by replacing the access points 80 AIR-1252.  I decided to replace our 1142 s at the same time so that the environment is up to date.  I was curious what the replacement recommended for these access points.  I see Cisco recommends the 1262 in lieu of the 1252.

  I work for an oil and gas company with locations across the country.  We use two 5508 s with Flex Connect runs the last code 7.3 7.4 into account in the next 6 months.  Our sites are a mixture of office space with warehouse or other environments difficult. I think 2602 s to replace the 1142 s and 1252 s mounted in offices, and I'm leading 1242 s to replace the 1252 s mounted in our warehouse/truck Bay environments.

  Well the 1262 did replace the 1252, but then Cisco came out with the 3502e and the 3602e.  Then maybe you should look at is using the 2602i in the office areas and maybe the 2602e in the area rugged or even look at the 3502e/3602e.  This way, you have all the AP that can sustain CleanAir.

  Thank you

  Scott

  Help others by using the rating system and marking answers questions as 'response '.

• How to set up the access point 1602 I just bought

  Hello world

  Hope you can help. I just bought an AIR-SAP1602I-A-K9 with an internet provider. With her, I also bought a power injector. I tried to use it as a standalone AP. It does not come with any instruction, and I'm not good at Wifi config. I hope you can help... My requirement of adjustment is very simple:

  -Create and broadcast the SSID called MYCSL

  N ' not no authentication or encryption. (is this open authentication?... so that people just plug the SSID as the user can start to cruise internet without putting in any key.)

  -The access point does not have a static ip assigned, instead, he gets an IP from one of my dhcp server in the network.

  -How to connect my laptop to configure via web http?

  Can you tell me what should be configured? Although it is a new product from a legitimate retailer... Cisco said that they could not support it without any contract of Starnet... as a consumer... they should give the kind of grace period to support the new products... In any case, hope you can help me out here :)

  I thank very you much for your help in advance.

  Takami Chiro

  Hi Takami,

  Take a look at one of the previous announcement. I would be more similar. Hope this will help you keep started. If you are the kind of things anywhere you please come back the Forum and someone will be able to help you.

  https://supportforums.Cisco.com/discussion/12217126/access-point-air-SAP...

  Hope that helps.

  Concerning

  Najaf

• Tunnel traffic through the Access Point

  I "tunnelenabled" in the parameters of Access Points of JSON: true;

  And on the Access Point associated connection servers config guide recommends not allowing the tunneling.

  The end result is that the traffic is going through the Access Point and not crossing does not connect to the server. The client wants to keep the absolute minimum for the ports open between the objects, so I want to tunnel traffic from the Access Points through the connection to the server, and then click the virtual and physical machines internal who installed the agent to view. Even when I check the options of tunnel on the login server it always appears as if traffic is bypassing the broker for the connections and go straight to the agents.

  
  

  What the configuration change that I do have all the traffic goes through the access points and associated connection servers?

  
  

  Thanks in advance for any help or suggestion-

  
  

  J

  After a lot of trial and error reduced us to certificates that we created for Access Points. HTML5 Blast Bridge did not have other names of the object in the cert. Once we gave them a cert that had the URL and not the SAN (subject alternative names) with the real access Point server names that Blast started working again.

• Launch of Lightroom 6 is not. error: "can't find the access point of the procedure _crtCreateSymbolicLinkW in the MSVCR110.dll dynamic link library.

  It says: "cannot find the access point of the procedure _crtCreateSymbolicLinkW in the MSVCR110.dll dynamic link library. What can I do? I have already uninstall and then reinstall the software...

  It is indeed a microsoft problem, check here:error "did not find the entry point _crtCreateSymbolicLinkW - Microsoft Community .

• The question of the Access Point wireless router

  I am considered to be an amateur when there are routers so patient with me. I have a wireless router in my office and two workstations are hardlined (ethernet cable-joint) to the router. Then, in the living room, I have 3 devices (Xbox, BlueRay, directTV) I want on the network. Rather than running three office ethernet cables, I expect to have some sort of (reverse hotspot) where a device could hop on the wireless router and the signal I inflexible at these three devices. Not sure if this would require an Access Point or another wireless router?

  Any thoughts would be appreciated.

  -J

  I suggest that you try to find something on WET54GS5... is a bridge with 5 ports wireless if I'm not mistaken... but since it's under Cisco Small Business, I suggest you could ask more about it here

  Cisco Small Business support community

  Or you can see WET54G and buy a separate so you switch can accommodate other devices
  

• The connection between your access point, router or cable modem and the Internet is broken...

  -router

  connection internet dropmy every 20 minutes and again after one minute everything is as before... pls help has me... mb my router is a waste

  Wire? Wireless? Status of other computers (if any)? Router? Network devices? Type of Internet connection?

  Have you other computers can connect to the Internet using the same network hardware?

  You have any kind of 3rd party Network Manager installed, like Hello, Netmagic and the likes?

  Do you have the "Fancy" 3rd part security suits, or as the hybrid of nVidia Firewall Firewall.

  You are using more than one firewall (including native Windows), AV or other security applications active?

  If you use any 3rd part above, try to configure them to work corretly on your network, or get rid of them and see if it helps (RID, means getting rid, not just disable ).

  ------------------

  Assuming that you are connected with the wireless to the router.

  First scan the computer against the viruses and Malwares.

  When you are sure that it is clean.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET