HP 15-ac039TU laptop: HP 15-ac039TU laptop computer USB Driver

Similar Questions

• Pavilion n200 mod #15z laptop computer: HARD drive

  Thanks for reading.  My HARD drive went out on computer HP laptop pavilion of my model # is 15z n200 Q. My son is what type of HARD drive do I need ATA or SATA.     the laptop is not a HARD drive at all so without pulling and searching, I can't find any info.

  You are welcome

  Good luck!

• Pavilion 15 laptop: Recovery USB drive: size adequate, can it be calculated from used space

  Hello

  I have a workbook (new), and the system has just updated to W10 threshold release 2. I had the laptop with a 1 TB drive. Is there a report/calculation of compression that can tell me if I have so much disk space used = size of the flash drive to buy?

  I want to buy a decent flash player, there is a quite a price difference between 16/32/64 GB.

  Thank you

  When you start the HP Recovery Media Creator, he will tell you what storage capacity must have the USB flash drive.

  It will be a requirement of storage 16 GB or 32.

• C3086UA #A8A: Error Message on the laptop computer says driver is not available and device error

  I tried to print from my laptop, a HP Pavilion G7, and nothing happened I went in devices and saw an error message on the PC icon.  He showed me the yellow exclamation point and says driver is unavailable and driver error.  The icon of the printer showed it's OK with the green check mark. I am an older person with not much technical experience and would appreciate any help on how to solve this problem with the drivers. Thanks for any help you can provide.

  Paul

  Hi @doowop47 ,

  Thank you for your query.

  I'm not sure if it is a printer problem or a problem of computer as you said that the error is on the PC icon not the icon of the printer.
   
  Unfortunately, I was unable to locate your model of laptop Pavilion G7 since the number you provided. This link should help with that.

  How can I find my model number or product number?

  Were there any recent changes?

  You did all your Windows updates?

  Have you tried to run the HP Support Assistant to help with the updates from HP.

  If it worked before you tried to do a restore to a date well known?

  You can also try a Refresh Your PC to solve problems (Windows 8)

  If it is a printer problem, and it is not an HP printer, it would be preferable for you to post in the constructor for the instance of printers.

  If it's an HP printer, please provide your exact name and model.

  Good luck!

• After syncing firefox from one laptop computer to the other, I repeatedly get syncted phone has the same IP address as the original. Reverse?

  One of the results of these two laptops with the same IP address was that the original laptop computer proxy settings have been changed and I could not get into the internet. After you restore the default proxy settings, I again had access to the internet, but two laptops always have the same IP address.

  You do not use DHCP to automatically assign different IP addresses?

• I downloaded iTunes on a new laptop computer and he allowed. First of a süden, I can't sync my iPhone 6. What can I do?

  I downloaded iTunes on a new laptop computer and he allowed. All of a sudden, I can't sync my iPhone 6. What can I do?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the build replacing iTunes for Windows (64-bit-for older video cards) which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

  As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

  At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

• Laptop computer charger plugged in but not charging

  Hello

  I bought a computer laptop hp pavilion dv6-6154tx laptop computer last month.my, developed a particular problem. When I connect my charger to it, it starts to load, but after a while it stops and the battery icon shows "plugged in, not charging". Then after awhile it again starts.

  Sudroid.co.cc

  There is a BIOS update available that is specifically for the intermittent support question. I recommend you to install.

• HP 15 laptop: I need driver unknow

  Hello, I need driver for my laptop model: HP 15 laptop

  unknow driver:

  IUSB3\ROOT_HUB30 & VID_8086 & PID_9CB1 & REV_0003 & SID_2337103C
  IUSB3\ROOT_HUB30 & VID_8086 & PID_9CB1 & REV_0003
  IUSB3\ROOT_HUB30 & VID_8086 & PID_9CB1

  Hello

  Try the driver directly from Intel on the following link.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-series-and-C220-C610-chipset-family

  Kind regards

  DP - K

• Direct print from laptop computer connection

  I have a laptop HP with windows 7 32 bit and the designjet 650 c B model with an installed direct jet card, so I a usb converter cable network I want to print from a usb port or from the port of network cable. I just want to know what is called the port that I use? Help, please!

  You have a wireless router?  I have a Designjet 650 c connected to my router with a LAN cable, can I access the 650 c of my HP laptop wireless via the router.

  If you follow this path, you will get an IP address for the Designjet 650 c by selecting Prev in the menu until you get to the entrance, the top menu can go down three times for installing I/O, entry, entry (modular), entrance (network Cfg = >), down Yes, Prev, Prev, Prev, entrance, entry, down arrow twice for utilities Entry, arrow down twice for Config plot, Enter.

  That you select the jetdirect card like I/O device, get an IP address from the router and then print a configuration page that displays the IP address to halfway to the bottom of the page.

  On laptop computer click Start, devices and printers, do a right-click on the Designjet 650 c, printer, port properties, add a Port, Port TCP/IP Standard, new Port, following, then enter the IP config page printed.  For me, it comes to 192.168.1.13.  Enter the appropriate value, Next, Finish.

  If you do not have a router then consider making an inexpensive wireless router that could be wired to the Designjet and wireless for the laptop.  It would probably be a much better solution than to try to make a converter USB - lan.

• Impossible to attach Windows 10 laptop computer to the Internet via cable USB iPhone 5 c after update to iTunes and iPhone (March 2016)

  System information:

  Tactile Lenovo Y50-70

  Construction of 10.0.10586 of Windows 10-10586

  iPhone 5 c - iOS 9.2.1

  iTunes - 12.3.2.35 / 64-bit

  Cell carrier: Etisalat AF

  Last year in Afghanistan, I have used my iPhone 5 c to attach my laptop to the internet simply by connecting via USB.  It has always worked.  Was very simple.  When I returned to the States for R & R in November 2015, I've updated my iPhone and iTunes to the latest versions and upgrades Windows 8.1 to Windows 10.

  I am now back in Afghanistan and USB tethering no longer works.  WiFi tethering works half the time.  The other half of the time, when I try and connect to the network of the iPhone, it is said, you cannot connect to this network.  When I can't connect to the phone, I disable the personal hotspot, WiFi and Bluetooth on the phone and then I turn it back on.  I also turn off my WiFi adapter on my laptop and turn it back on.  Which usually solves the problem and then I can connect via WiFi.

  Do some research on the internet, I read that there was a file corrupted when the current generation of iTunes, but Apple had set and you just need to reinstall the current version, which I did.  I have reinstalled iTunes by suggestions from different site.  After reinstalling iTunes and restart, I can always have my phone to connect to internet via the USB cable.

  I want to be able to connect my laptop to the internet using my phone via the USB cable.  I want it all works just as it did previously.  Connection via WiFi is a pain in the ass, because it does not work half the time and disconnects on a regular basis.

  Please tell us what should I do to solve this problem.

  Thank you.

  OK, I finally understand how to solve this problem.

  I was able to understand because of this post:

  https://discussions.Apple.com/message/29267225#29267225

  The problem is that Windows 10 was not install appropriate drivers for my iPhone.

  You can see 2 places to see.  We're in the control panel.  After you plug in your iPhone, the iPhone will be displayed and highlighted as not having is not a compatible driver.  The other place is in "Devices and printers", there you will see 3 apple devices: 1 Apple Mobile Device USB Driver, iPhone 2, and 3. Apple iPhone.  All three appear when I plugged in my iPhone.

  However, the problem was one that said iPhone really should have said "Apple Mobile Device Ethernet".

  So, how to fix this?

  Open devices and printers-> right click Iphone which should be under "Unscpecified"-> properties-> hardware-> Propterties tab-> change settings-> tab driver-> update driver-> Browse my computer for software Local-> Browse to the directory "C:\Program Files\Common Apple Mobile Device Support".

  Make sure you have the files box to include under verified.

  Who did.  Windows successfully installed the necessary drivers.  Now, I can easily connect to the internet via the USB cable again without any problems.

• Problems of transfer of files on the laptop with USB - Satellite Pro L100

  I have a Topfield Freeview box that connects to my Toshiba Satellite Pro L100 via a very short USB cable. The box can read MP3s that I add via the USB connection.

  My previous laptop added to hundreds of songs without any problem at all. However, this new Toshiba there are very particular problems.

  I can send files of the TNT box to the laptop via USB with no problems, but if I try to send files (for example an MP3) Unlike - laptop box - it stutter and often fail. From time to time an entire song (only 4-5 MB) may be transferred without problems, but normally, it will not work. As I said, I can send 100 MB s, the other direction and everything works fine.

  I tried transfer MP3s from my laptop and on the TNT housing with non-Toshiba laptop from a friend today and worked well. This collaboration with knowing I could do the same with my old laptop, suggests that the problem is clearly with the laptop. There must be a reason this notebook can transfer information via USB in a much better than in the other direction.

  Is there anything I can do to upgrade drivers or software to allow my laptop works properly?

  [Edited by: admin]

  I put t know why this happens and I can only suggest.
  For example on my laptop when something be transferred from an external source laptop and another way the software Anti Virus check all files and so it takes much more time.

  I just disabled the anti scan antivirus and firewall and the transfer was going faster.

  Eventually he s has the same problem on your laptop

• to replace my laptop HP HARD drive... help!

  Hello...

  I have Hp 2000 - 2202 you series Notebook.

  I'm a difficulty as to the compatibility of the current HARD disk with the following drives: -.

  1)WD Scorpio Blue 500 GB computer internal laptop hard drive (WD5000LPVT)

  • The Interface SATA 3.0 Gbps
  • 8 MB Cache
  • 5400 RPM spin speed
  • 2.5-inch form factor

  2)Seagate Momentus 500 GB internal laptop hard drive (ST500LT012)

  • 2.5-inch form factor
  • 5400 RPM spin speed
  • The Interface SATA 3.0 Gbps
  • 16 MB Cache

  (3)internal hard drive WD Blue 500 GB laptop computer (WD5000BPVT / WD5000LPVX)

  • 2.5-inch form factor
  • The Interface SATA 3.0 Gbps
  • 8 MB Cache
  • 5400 RPM spin speed

  I get a 7200 RPM drive, but if you buy one of those, get one with 16 meg cache. It will be more efficient. Western Digital and Seagate are now or will soon be the same company. Portable hard drives now come in versions 7 and 9.5 mm. Of 7mm are necessary to Ultrabooks and other portable thin and 9.5 mm discs do not fit into a slot of 7mm, but a 7mm disc can be used in place of a drive of 9.5 mm. The connections and the mounting holes are in the same location and the thin disk rises just a bit lower in the caddy.

  My suggestion:

  http://www.Newegg.com/product/product.aspx?item=N82E16822145587

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP15-g088ca: HP 15 laptop computer purchased less than 2 years ago. Broken hinge, display cases of separation. HP, please help.

  My son uses his laptop computer HP15 home to his office, rarely transporting.  He never gave it and a sweet user.

  The left hinge seems to be broken / defective, and separates the window.  For now, we are all leaving the screen open all the time, but it's a little awkward and the problem is certainly on a laptop less than 2 years old.

  Looking at the forum, it looks like a common problem.

  We are fans of HP in general, so I hope that this problem can be solved.

  Help, please.

  -Steve

  Hooray!

  HP solved the problem free of charge, including shipping in both directions and repair.

  It took ten days in total, and we used the laptop without a problem for about 10 days more.

  It seems that the hinges for laptop and the display case were entirely replaced, and no data has been lost.

  My son is thrilled to have his laptop in return, and to my eyes, HP just went through.

  I wouldn't hesitate to buy another HP product, although I confess in the hope that:

  (1) HP manufacuring no longer uses defective parts

  (2) HP treats everyone with this problem of hinge with the same care

  Thank you and HP support HP!

  -Steve

• Satellite A210 - 1 4 - failed to start the laptop computer just orange light

  OK, so this is what happened:

  While my friend was working on his laptop computer that she had his charger plugged but it did not load. I discovered that the lead from the Charger AC/DC had frayed and should resolidering. After that the laptop was working fine, I looked inside the laptop to check the AC plug connector before I fixed the cable.

  I noticed that the WiFi card was broke, so I changed it to a WiFi card in my other laptop used. After back the laptop together and put the battery in, the lights on the front flash blue only and the power light stays orange as if the laptop is in stand-by mode. I can hear the hard drive turns and the CPU heats more CD-ROM drive works, but I can't start that the laptop just sits there with the Orange.

  I tried out the CMOS battery, I took out the main battery and just used the AC/DC adapter, but the same thing happens.

  ANY IDEAS?

  Hello!

  I'm not sure, but what happens if you remove the WiFi card you created in? The new card is may be defective or not compatible with the laptop.
  You can start without WiFi card?

  To me, it looks like a hardware problem and your laptop should be checked by a technician of the laptop. Maybe the motherboard needs to be replaced or something else

  Good bye