HP 15-d003sm Notebook PC: start Bios problem-white screen

Similar Questions

• Starting Firefox Long white screen 2-3 seconds.

  I went on my computer today and it worked fine, but then I'm gone a little and put firefox updated. Now with the new version, it does this
  https://www.YouTube.com/watch?v=ojOE6kB9iCc

  I reset my settings, I installed a previous version (this video has been old version) but then I ran firefox in safe mode and it starts instantly in firefox no white screen and no problem of menu bar as if I had when it isn't running in safe mode. Now, I looked in my addons and he says nothing, I installed. Do I have to remove my personal settings and lose all passwords of ym, or is their a way I can support everything up (I saved bookmarks) but I want to delete all firefox on my computer and start and I want a backup incase she won't.

  Can someone tell me how can I save my personal settings such as cookies and saved passwords?

  Somehow I fixed it by reseting firefox that gives me a backup on my desktop folder. I completely uninstall firefox and remove the settings, and then install the latest version, and I replace my old profile and go to the .ini file and edit the new path.

• Start-up and white screen issue after updating to v10.11.5?

  I can't say 100% that my problems are related to the last update, but I thought I'd ask.

  I've updated about 4 or 5 days ago, and although the questions did not begin immediately, they start after the update. It should be noted that I have never had issues like this before.

  Here are some of my questions on my MacBook Pro (17 inch, early 2011), 2.2 GHz Intel Core i7, 8 GB at 1333 MHz DDR3, Intel HD 3000 512 MB graphics card

  1. the monitor will sometimes go haywire and a strange split, screen where the mouse can go to the left side of the screen and reappear on the right side of the screen, because the office is now split into two

  2. computer crashes and the monitor starts flashing to show a blue zigzag striped background

  3 freeze during startup and never restart computer. Occasionally, it will start very well, but the computer locks upwards at some point while using

  4 computer at boot flashing out to a white screen then restart never

  Thanks for any help.

  Now I'm starting to think my problems are related to a single user, sign in. Only 2 people use the computer and my connection seems to be fine. No crashes or anything like that.

  The problems start when my wife logs in to his user account.

  Thought I would mention it.

  Any help/response would be appreciated.

• Replacement Palm TX has problems white screen even after hard reset

  I hope someone can help me find a solution.

  I've been a happy user of Palm OS since the early days of Palm III.  After a Palm III and V, had a Sony Clié which lasted a long time, but finally fact poop, went to a Z22 and broken screen, then almost but not quite a year ago (in warranty, so-called), bought a Palm TX.  Worked great for a while but ends with a unit I could not turn on or off because the switch was dead.  Worked around to keep the sync cord and power on by pressing the button and then cancelling.  Finally he sent for repair under warranty.  Return a unit back to me.

  It worked well for almost a month, then it started (with no new software or usage patterns) to have white screen problems.  To resolve this problem, I tried a lot of things.  Soft reset, reset hard, leaving completely take its battery for weeks at a time.  Nothing works; It continues to go on me.  In addition, the sound is strange and garish when it beeps (for example accept zone after reset).  I bought the TX to the United States when I was home for a visit last July, but am currently living in the Netherlands.

  I contacted Palm repair center in the United Kingdom which has replaced my original unit; They said would pass on the word of my troubles of Palm and Palm should contact me, otherwise for them by e-mail.  They do not have.  I don't find an e-mail address to explain all this to anyone with any power to help me.  I tried to use the Palm website to solve this problem, but neither the original serial number or the serial number of the replacement unit I have now shows as eligible for warranty repair.  I tried calling the support number us Palm (http://kb.palm.com/wps/portal/kb/common/article/47005_en.html#howservice), but I get "call is temporarily unavailable."  When I click 'here' when asked 'If you want to query the status of the warranty of your handheld, or prefer to repair through our Technical Support Department, click here' (https://www.euroservice.palm.com/repair_entry/NLD/EE) I find myself on a page that simply says: "Please enter the Url of the Source."  I hesitate to provide information of credit card for a problem, if it can not be covered by the warranty (which I think it should be, since I'm still in the initial period of 12 months), can I give up.

  I am very frustrated trying to solve this problem.  I am disappointed with the support decreases for a PDA (which is not a phone) with Palm OS.  Since I am living (though not comfortably or well) without my calendar, address book, alarm, player, dbs, cookbook, checklist, etc., I am seriously considering to leave Palm OS.  My preference is to resolve this problem, and my idea nearly a year ago was to climb the Palm OS until it was completely gone (embedded in phones, anyway), but my problems have discouraged me to the point that I wonder if it is my end.

  Does anyone have a suggestion?

  Hello..  Not at all.   I suggest that because it was repaired in the United Kingdom, which indicates that it is a device of UK. Otherwise they would not be able to fix it it were an American feature.  Warrenties are the same, Yes, but on the marginal seas cannot be fixed across the country, they were designed for.  If it is a U.S. unit that UK should have refused to repair and referred you to US support.  Because it didn't happen I guess that's a device and if so you need to communicate with them. From the link that I sent you, on the left thumb to contact us, there are ways to communicate with them another email then. If it fails try another phone and I'm sure you can get this resolved.  If it is infact a device US contact our support pda to US @ 866-935-7256

  Message edited by Damien on 06/30/2009 08:24

• Problem white screen

  Dear Sir/Madam

  I am facing problem while connect on Skype as my office shows a white screen for Skype. I am attaching the attachment for the same as my screenshot of Skype desktop.

  My version of Skype is 6.22.81.104

  Help, please...! ... First released.

  Concerning

  Rahul Goyal

  

  Your .css registry settings are not defined by default Windows very likely due to a 3rd party software for a long time in the past (not Skype). You can apply the registry fix to resolve the problem:
  
  http://community.Skype.com/T5/Windows-desktop-client/Skype-6-10-0-104-big-login-screen-problem/m-p/2...

• PROBLEM WHITE SCREEN! all our application cannot run properly after the update.

  Could you please help to solve the problem as soon as POSSIBLE white screen?

  We are one of the educational company in Hong Kong, and we have developed several Flash based in these years learning and these distributed CD-ROM applications.

  Web site: http://www.KOTECH.hk/

  Unfortunately, the update of 20.0.0.267 lead to problem of white screen in any of these programs.

  Our customers (including schools) are complaining to us and we are not able to solve this problem.

  Please refer to the attached image for your reference.

  

  Hello

  Please update your Flash Player at 20.0.0.270.

  https://get.Adobe.com/flashplayer/

  The problem is resolved.

  Thank you

• Satellite L300D starts in a white screen with the mouse cursor

  Hello

  Asked by my friends to help them solve their L300D. Their son had him and they are not sure of what he did, but now when it loads in VIsta, all they get is a black screen with a cursor of mouse in the middle. The slider looks as if it was a less than normal display resolution.

  I thought that this would be easily fixed by running a restore, but it did the same thing when I load restore (via the holding company 0 at startup) and even the copy of Windows 7, I tried to install as well.

  I think it might be a hardware problem, but before bringing them to contact Toshiba Service for warranty repair, I thought I could post it here and see if anyone has suggestions on what it could be.

  Hello

  Hey good buddy, if the same question is displayed if you load the function of food and also with Windows 7 I think that it s a hardware problem.
  You can try to load the BIOS default settings maybe it works.

  To be honest, I think the best way is, you contact the nearest authorized service provider. Technicians can check the mobile and Exchange material, if there is a hardware problem.

  Welcome them

• Problem white screen of HP DV4-1242. Tx drivers updated so no startup, is my GPU dead?

  I think that my Tx Hp DV4-1242 with 9200GS nVidia GPU THAT just died today. Its been about a year since I bought it. Numlock keys flashing '4' time, lifted the eyes on the site of hp support for Flash/beep codes / absolutely no boot, caps lock (link: http://bit.ly/cwOCdx , discovered, it is a failure of the gpu/controller, experienced overheating issues before, the authorized service center hp claimed they fixed a month ago while I found that overheating snap made not a lot of difference.) Last night I updated my drivers from nvidia's official website (link: http://www.nvidia.com/object/win7-winvista-32bit-257.21-whql-driver.html) and in the morning I think that my gpu dropped on me. Is there something I could do about it?

  Guys guess what, my laptop is to life once more. IAM so happy here's what I did.

  Ripped open my laptop for her skin, I want to say my motherboard (thank God he gave me a few tense moments), followed the guide to disassembly I found on the net, there was a lot of accumilation of dust on the CPU and gpu, the radiator and the fan. Sprinkled on it, re - apply the thermal paste on the gpu, return all the threads of the screws and parts, booted up my laptop and here it starts without any problem! With the exception of the cmos checksum error, there was no other error message! Thank God it works now Heres the guide apply new thermal paste on the gpu http://bit.ly/bES6qf

  Mods, I guess you can close this thread now!

• Acer Aspire 5610Z problem white screen

  I have an Acer Aspire 5610Z and I have a problem, turn on - I get vertical lines 4/5 strips, or sometimes just a black screen.  I turn on the monitor and off several times (up to an hour, even with times) to operate once again, but once it is activated, it works quite well.  Pleeeeeeeeeeeeeeeeeeeeeeeeeeese help!

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Start safe mode and check if it helps.

  Boot safe mode in Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Put the computer in a clean boot state, then check if that helps you.

  How to solve the problem by running the clean boot in Windows vista:
  http://support.Microsoft.com/kb/929135 Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 3:

  Try to update the graphics driver and check if it helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope the information is useful.

• "Your computer restarted because of a problem" white screen

  Times completely random, sometimes while doing work, sometimes just browse Safari; My Mid 2010 15 "MacbookPro will hang at a blank screen and tell me she restarted because of a problem.

  I tried AHT 'internet recovery mode' and he told me that the machine is not supported.  I don't have the original disks to I can't run AHT.

  I ran memtest86 and he told me 4 sticks of 2 GB of RAM different were bad, so I don't think that it is running properly.  I ran a test drive and seems to be fine as well.

  ideas?

  EDIT: I've reformatted my HARD drive and a clean set of El Capitan so I do believe that it is related software.

  "crash to a blank screen and tell me that she has restarted because of a problem."

  You must have the new RAM (memory) installed. That's why you see what is referred to as a kernel panic.

  http://www.Apple.com/retail/storelist/

• Problem white screen of Smartphones Curve 9300 blackBerry, which has not been resolved with a restoration/upgrade at level

  Hello. Got my new 9300 in may, been fine until today taken out of case and the screen was white for about 3/4 of the width.  At out the dough and reintegrated.  Do you have a pc, backup and restore, and updated software, but the screen is always white in half way through.  Can not work what to do next.

  Hey ivvey,

  Welcome to the forums.

  If you already have a reload of software and you encounter the same problem, so it seems to be a hardware problem. I suggest you contact your point of sale for options.

• Problem white screen blackBerry curve Smartphones

  I'll have forced major with my Blackberry Curve

  The guard screen goes white and white, then the phone resets and guard going round and round in circles and reset shutter.  A few times, loaded it up, but at the time when I sent a message he has gone empty again and reset.

  This last time, he loaded the screen says... untrapped exception limit<=4 ...="" or="" something="" very="">

  Please help because I have no idea what to do about it.

  Thank yo for a advise you can give me.

  Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for five minutes and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

  Let us know what happens.

• Cannot start dreamweaver cc15 white screen

  Hello

  Since this morning screen on startup of Dreamweaver cc15, stuck at step "init assets."

  Any idea on how to clean it?

  PS: I am running Windows 8.1

  Thank you

  Finally found the trick using this link:

  Restore preferences | Dreamweaver CS6, Dreamweaver CC

• Pavilion H8 - 1240t starts with a blank screen!

  From time to time my old Pavilion of 2 years with an AMD Radeon 7070 graphics card will start at a white screen and will continue to restart over and over again until I have pull the plug. Apart from that, a mess the PC works fine!

  How I managed to do it starting right now has been by reinstalling the video card and removing the battery on the motherboard for a few seconds. Is this common? What exactly is causing this problem?  HP Tech offers no answers whenever I call them?

  Hi bigollo, sometimes the bios gets into a loop and the solution is what you've done, remove the battery from the motherboard is reset the settings, you have to return your graphics card? fact the pc works fine now?, thanks, Adi.

• How to report the BIOS problem?

  Hello

  is it possible to report the BIOS problem so that a person of HP it will read and the problem will be solved if all goes well?

  To be concrete, there seems to be problem in BIOS F.02 installed on HP Mini 5103 causes of freeze if it has plugged the USB key with 'recursive partitioning' at startup. As a result, it is not possible to boot from live USB which was created from some ISO hybrids (e.g. direct ISOs of OpenSUSE recent). Since there are not many options to install the system on netbook, I think it is serious problem. My previous netbook Lenovo Ideapad S10 - 3 and also my work laptop and desktop have no problem to start with the USB stick containing "recursive partitioning", so it's certainly a problem (hopefully not feature) this concrete machine/BIOS.

  Thank you

  That's ok on the Bravo, I did nothing to help you again.  This link is for questions of security, but it is also for the firmware, so you can get away with sending them a note here:

  https://h41268.www4.HP.com/live/index.aspx?QID=11503

  - Or call them.

  http://welcome.HP.com/country/us/en/contact/phone_assist.html#section1