Problem white screen

Similar Questions

• PROBLEM WHITE SCREEN! all our application cannot run properly after the update.

  Could you please help to solve the problem as soon as POSSIBLE white screen?

  We are one of the educational company in Hong Kong, and we have developed several Flash based in these years learning and these distributed CD-ROM applications.

  Web site: http://www.KOTECH.hk/

  Unfortunately, the update of 20.0.0.267 lead to problem of white screen in any of these programs.

  Our customers (including schools) are complaining to us and we are not able to solve this problem.

  Please refer to the attached image for your reference.

  

  Hello

  Please update your Flash Player at 20.0.0.270.

  https://get.Adobe.com/flashplayer/

  The problem is resolved.

  Thank you

• Replacement Palm TX has problems white screen even after hard reset

  I hope someone can help me find a solution.

  I've been a happy user of Palm OS since the early days of Palm III.  After a Palm III and V, had a Sony Clié which lasted a long time, but finally fact poop, went to a Z22 and broken screen, then almost but not quite a year ago (in warranty, so-called), bought a Palm TX.  Worked great for a while but ends with a unit I could not turn on or off because the switch was dead.  Worked around to keep the sync cord and power on by pressing the button and then cancelling.  Finally he sent for repair under warranty.  Return a unit back to me.

  It worked well for almost a month, then it started (with no new software or usage patterns) to have white screen problems.  To resolve this problem, I tried a lot of things.  Soft reset, reset hard, leaving completely take its battery for weeks at a time.  Nothing works; It continues to go on me.  In addition, the sound is strange and garish when it beeps (for example accept zone after reset).  I bought the TX to the United States when I was home for a visit last July, but am currently living in the Netherlands.

  I contacted Palm repair center in the United Kingdom which has replaced my original unit; They said would pass on the word of my troubles of Palm and Palm should contact me, otherwise for them by e-mail.  They do not have.  I don't find an e-mail address to explain all this to anyone with any power to help me.  I tried to use the Palm website to solve this problem, but neither the original serial number or the serial number of the replacement unit I have now shows as eligible for warranty repair.  I tried calling the support number us Palm (http://kb.palm.com/wps/portal/kb/common/article/47005_en.html#howservice), but I get "call is temporarily unavailable."  When I click 'here' when asked 'If you want to query the status of the warranty of your handheld, or prefer to repair through our Technical Support Department, click here' (https://www.euroservice.palm.com/repair_entry/NLD/EE) I find myself on a page that simply says: "Please enter the Url of the Source."  I hesitate to provide information of credit card for a problem, if it can not be covered by the warranty (which I think it should be, since I'm still in the initial period of 12 months), can I give up.

  I am very frustrated trying to solve this problem.  I am disappointed with the support decreases for a PDA (which is not a phone) with Palm OS.  Since I am living (though not comfortably or well) without my calendar, address book, alarm, player, dbs, cookbook, checklist, etc., I am seriously considering to leave Palm OS.  My preference is to resolve this problem, and my idea nearly a year ago was to climb the Palm OS until it was completely gone (embedded in phones, anyway), but my problems have discouraged me to the point that I wonder if it is my end.

  Does anyone have a suggestion?

  Hello..  Not at all.   I suggest that because it was repaired in the United Kingdom, which indicates that it is a device of UK. Otherwise they would not be able to fix it it were an American feature.  Warrenties are the same, Yes, but on the marginal seas cannot be fixed across the country, they were designed for.  If it is a U.S. unit that UK should have refused to repair and referred you to US support.  Because it didn't happen I guess that's a device and if so you need to communicate with them. From the link that I sent you, on the left thumb to contact us, there are ways to communicate with them another email then. If it fails try another phone and I'm sure you can get this resolved.  If it is infact a device US contact our support pda to US @ 866-935-7256

  Message edited by Damien on 06/30/2009 08:24

• HP 15-d003sm Notebook PC: start Bios problem-white screen

  Hello.
  I have

  HP laptop 15-d003sm.

  It worked well until I change BIOS int outside primary graphics card. I learned that what I can use powerful... Then when I've reset it shows nothing, white screen. I try to find the solution to save the bios to the default values, but cannot do it on the blind.
  Also, I tried to turn my tv on VGA and hdmi conectors, but still nothing, no TV signal. Help, please!

  Hi @Free11111 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your laptop HP 15-d003sm and issues with the BIOS. You can Reset the BIOS with this document by selecting the reload the default BIOS settings. Helping others it restores the default settings.

  Here is a link for help with a laptop not turn is not on. It shows you how to perform a repair of Windows.

  Please let me know how it goes.

  Thank you.

• Problem white screen of Smartphones Curve 9300 blackBerry, which has not been resolved with a restoration/upgrade at level

  Hello. Got my new 9300 in may, been fine until today taken out of case and the screen was white for about 3/4 of the width.  At out the dough and reintegrated.  Do you have a pc, backup and restore, and updated software, but the screen is always white in half way through.  Can not work what to do next.

  Hey ivvey,

  Welcome to the forums.

  If you already have a reload of software and you encounter the same problem, so it seems to be a hardware problem. I suggest you contact your point of sale for options.

• "Your computer restarted because of a problem" white screen

  Times completely random, sometimes while doing work, sometimes just browse Safari; My Mid 2010 15 "MacbookPro will hang at a blank screen and tell me she restarted because of a problem.

  I tried AHT 'internet recovery mode' and he told me that the machine is not supported.  I don't have the original disks to I can't run AHT.

  I ran memtest86 and he told me 4 sticks of 2 GB of RAM different were bad, so I don't think that it is running properly.  I ran a test drive and seems to be fine as well.

  ideas?

  EDIT: I've reformatted my HARD drive and a clean set of El Capitan so I do believe that it is related software.

  "crash to a blank screen and tell me that she has restarted because of a problem."

  You must have the new RAM (memory) installed. That's why you see what is referred to as a kernel panic.

  http://www.Apple.com/retail/storelist/

• Acer Aspire 5610Z problem white screen

  I have an Acer Aspire 5610Z and I have a problem, turn on - I get vertical lines 4/5 strips, or sometimes just a black screen.  I turn on the monitor and off several times (up to an hour, even with times) to operate once again, but once it is activated, it works quite well.  Pleeeeeeeeeeeeeeeeeeeeeeeeeeese help!

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Start safe mode and check if it helps.

  Boot safe mode in Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Put the computer in a clean boot state, then check if that helps you.

  How to solve the problem by running the clean boot in Windows vista:
  http://support.Microsoft.com/kb/929135 Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 3:

  Try to update the graphics driver and check if it helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope the information is useful.

• Problem white screen blackBerry curve Smartphones

  I'll have forced major with my Blackberry Curve

  The guard screen goes white and white, then the phone resets and guard going round and round in circles and reset shutter.  A few times, loaded it up, but at the time when I sent a message he has gone empty again and reset.

  This last time, he loaded the screen says... untrapped exception limit<=4 ...="" or="" something="" very="">

  Please help because I have no idea what to do about it.

  Thank yo for a advise you can give me.

  Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for five minutes and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

  Let us know what happens.

• Problem white screen of HP DV4-1242. Tx drivers updated so no startup, is my GPU dead?

  I think that my Tx Hp DV4-1242 with 9200GS nVidia GPU THAT just died today. Its been about a year since I bought it. Numlock keys flashing '4' time, lifted the eyes on the site of hp support for Flash/beep codes / absolutely no boot, caps lock (link: http://bit.ly/cwOCdx , discovered, it is a failure of the gpu/controller, experienced overheating issues before, the authorized service center hp claimed they fixed a month ago while I found that overheating snap made not a lot of difference.) Last night I updated my drivers from nvidia's official website (link: http://www.nvidia.com/object/win7-winvista-32bit-257.21-whql-driver.html) and in the morning I think that my gpu dropped on me. Is there something I could do about it?

  Guys guess what, my laptop is to life once more. IAM so happy here's what I did.

  Ripped open my laptop for her skin, I want to say my motherboard (thank God he gave me a few tense moments), followed the guide to disassembly I found on the net, there was a lot of accumilation of dust on the CPU and gpu, the radiator and the fan. Sprinkled on it, re - apply the thermal paste on the gpu, return all the threads of the screws and parts, booted up my laptop and here it starts without any problem! With the exception of the cmos checksum error, there was no other error message! Thank God it works now Heres the guide apply new thermal paste on the gpu http://bit.ly/bES6qf

  Mods, I guess you can close this thread now!

• After account reset white screen again

  After reset, my personal account has changed, the old 23183 is now 33500 and I have the same problem - white screen.

  Hello

  It looks like a problem with the Toshiba online store I n t think that account reset might help since other users here in the forum have reported the same problem.
  I think you have to wait that Toshiba has solved this problem.

• White white screen on Dell Inspiron 15 - N5030

  Hello world

  I am trying to solve this problem with my wife's cell phone and its really frustrating. His Dell Inspiron N5030 and it's just more than a year. Unfortunately the 1 year warranty expired and this problem started to arrive in 2-3 months. The problem is, when you start the laptop, it has a complete blank white screen. I read quite a number of messages autour and many have suggested that it is usually a video cable connection, or a bad video cable of the lcd screen or a problem with the motherboard. I will explain the steps that I've done so far and I hope someone here can guide me on what I can do next to fix this.

  First of all, when this problem started happening, it was very unpredictable. Which means that, sometimes, the laptop starts fine but sometimes white screen appears. But as the weeks went by, the white screen begins to appear more frequently, and now it appears all the time. That's what I found so far:

  (1) when you connect an external monitor, the external monitor works fine. The strange thing is, sometimes when I connect the external monitor, disappears from the white screen of the laptop and the screen lcd laptop starts to work again. I got this as a workaround for some time. Whenever the white screen appears, I connect the external monitor and remove it when the screen of the laptop working again. But eventually it stopped working as well.

  (2) when the white screen started coming all the time, I noticed that the problem goes away when I remove the outer cover of the screen. (the black frame around the screen that can be removed by pulling the top of the screen).

  (3) last week, I removed the LCD and taken apart to see if there was any loose connection at the back. I noticed there is no loose connection and the inverter was very good as well. However, I noticed that the black (video cable) cord that connects the back of the lcd screen to the motherboard was sorta stuck around the hinge area. I corrected this cord so its properly seated and made sure that the outside frame does not grow this rope to the hinge when I set everything again. When I did this, the laptop started to work very well for next week without problem but now the white screen started to reappear!

  So, based on what I've seen, I think that the cord is blocked around the hinge and therefore to cause this problem. But I'm not a techinical person and don't know if its correct. It's just a guess... So I don't know what I'm doing then? This means that the video cable is drunk or is just blocking on the hinge at the origin of this problem? What I need to change the complete lcd video cable or is there another solution by moving this cord away from the hinge to fix this from happening? What I try next?

  I appreciate all help and thank you for taking the time to read my post.

  Hello world

  Here's an update on the solution of this problem with screens white white. I finally fixed it, and this time I know for sure that this problem is definitely solved.

  First of all many thanks to "randypittes" for first of all the solution and share with all the world. Much obliged!

  After setting up with this problem white screen for several months, I finally bought the "LCD video cable" on ebay and he succeeded. Its been 2 weeks now that I changed the cable and the problem re does not! I wanted to give him two weeks first and see if the problem comes back again until I jump into conclusion and now that my laptop works perfectly again, I know for a fact that this problem is probably resolved.

  So, those of you experience the same problem, do the same thing. First of all start by replacing the LCD video cable and this should fix the white screen issue. He me $20 encrypted only on ebay (including delivery in sydney) and it is a much cheaper option than to try to replace the screen itself. If this does not work for you, then you can look into other options. But I would say, this solution should solve most of the white screen issues you may encounter.

  Here is a guide that I put in place about how I went to change my video cable in my laptop. I don't know that it can be useful to other beginners like me:

  Step 1: first of all, make sure that first download you the manual of your laptop. Google simply your laptop model and you should be able to find the manual for it on how to replace its parts, etc... It's really convenient when getting started.

  Step 2: Check out this video on how to remove the screws around the LCD and how to get to the video cord to the back of the LCD:

  cs_setInnerHtml ('video_8efdced1-828d-4463-b632-022776eb4f65', ");

  Step 3: Check the downloaded Reference Dell manual and see how to remove the screws on the laptop base and how to remove the:

  (a) is based

  (b) keyboard.

  Step 4: once you remove the palmrest and keyboard access to the motherboard with the video cable is connected.

  Step 5: Replace the cable and reassemble everything to the way it was.

  It's her! And good luck to all! You need... :-)

  without a doubt

• Problem with the iPhone OS. Have to restore it several times and it now has white screen flashing with Apple logo

  Got my iPhone SE a little over a month since the Thailand of the Apple Store.

  First he couldn't restore entirely made from a backup so I had to delete all data and content then restored again. Then try to restore from a backup, still have problems (apps froze, failed to synchronize all of the apps, then tried to shutdown phone and glued on white background with the Apple logo).

  Try to third, I put my phone in recovery mode and restore as a new iPhone. All original content is now gone. Should it start again.

  Then small annoying problems occurred. For example, I could not find applications in the App Store, could not download new free applications, could not buy music on the iTunes Store app. It seems that Internet was frozen, when in fact it works always fine when try browsing on Safari. Facebook froze and could not push Home button to close App game graphics making static sound glitches but always disappear when him restart the application. Can't post photos on a social media application because my whole library of photos seems to be empty, when in fact he was always there. When I was taking pictures, the preview images were extremely blurry, and when checked in Photos app there is no trace of this photo that I took. I tried to close all the applications and open it again but the problem still persists. So I close the phone and restart it just to find that it stuck on the white screen with the Apple logo once more. Then, I took the phone to the Apple service provider. They restore the phone as a new iPhone for me and I had to start over once again. Only 4 days after this, my iPhone application suddenly found me a new unlock access code within 60 minutes without reason. I have to reset hard to solve the problem. And after that, the same day, my iPhone starts to blink on and outside and sometimes the white screen with the Apple logo appears.

  Whenever I said my problem of staff Support from Apple or the Apple service provider, they told me that it was a software problem. How can I when I do all these problems again and again from the beginning until now? Can anyone suggest me the right way to solve this problem? What problem do you think it's from? I can't take this anymore. I need a good show, not working iPhone undesirable. I can't keep it restore/reset/reboot over and over again like this. Please, help me.

  Sasawan

  You can watch some of my problems here on Youtube > >

  1 screen kept flashing white background with the logo apple and restart and turn off by itself. Sometimes I can go past lock screens, but it only last a few minutes, then it starts all over again > > https://youtu.be/tfygV57NmmY

  2 message when my phone push me to reset my unblocking reason code > > https://youtu.be/a_AKPWxfAfs

  3 static glitch sound on the Sims Freeplay game > > https://youtu.be/qw12RZ4yMqc

  Take it to an Apple Store for the assessment of the guarantee.  If you have restored to factory settings, and these problems persist, there is a hardware problem, no matter what you' re said.

• After upgrade to 13.0 then video of some Europe namely, c-span and pbs only show a white screen blank no pictiure. Allowed Ipopups without problem with IE

  When I go to c - span.org and try clicking on c-span, 1,2 or 3, I get a white screen instead of the video. On PBS.org when I try to tell a Frontline video I get a white screen but no video. This happens with several websites that show video. I have blocker disabled, no chance. When I use Internet Explorer the videois displayed. This problem has nit exist before I upgraded to Firefox 13.0

  Hello nowaytoday, it is probably a problem related to the recent update of the adobe flash plugin, which was released on 8 June (IE uses another variant of the plugin). Please refer to the following article for common solutions: 11.3 Flash does not load video in Firefox

• White screen on model Equium M50-216 SM57E problem

  I'm having a strange problem with the computer screen... Start-up of the laptop... against the cold, the Toshiba logo flickers then the windows logo then flashes black... However, the screen is still backlit... The laptop works perfectly apart from that. I can connect to external monitors and it works very well, but here's the weird thing...

  I connected on three different monitors it works in 2 4:3 monitors. It does not work in my wide screen... when he starts the Toshiba logo comes up then the windows logo then just prior to the Welcome screen of windows (that blue thing at the beginning) the monitor says no signal.

  After a while the display on the laptop will appear and be fine until I stopped it (usually, sometimes the screen off, and without touching it's back in a minute).

  The white screen comes generally from when the laptop is started after being off for a while; For example, suppose that during the night... I simply closed the lid last night, and no do not stop correctly then when I opened it this morning the screen worked perfectly. There is no other display weirdness... bad pixels, lines, anomalies of any other nature.

  I recently reinstalled everything and the problem is still there. Please say it is (Hey! the screen comes back) a driver problem or something as simple

  Help with this (or even a suggestion) would be greatly appreciated
  See you soon
  Dave

  PS: everything works fine apart from this.

  Hi mate

  The story sounds very mysterious and my first thought is that it might be an unwanted material.

  But usually it of not easy to provide a diagnosis exactly and we should first check if the software doesn't cause questions!

  So first of all, it would be interesting to know if the same thing happens on laptop retrieved fresh. Using the recovery CD, you would get the factory settings!

  A BIOS and update the graphics driver are the following options!

  So check it out and let me know the results

  See you soon

• Wanted: White screen after 10 Windows Update - problem even when back in windows 8.1

  Hello

  I've updated to windows 10 and after a few hours, the main screen of my laptop went blank but my second monitor that I use with a HDMI cable still works.

  Here is a screenshot - one screen shows white and I'm typing this on screen 2 (continue below)

  I've updated my drivers in Device Manager but problem persists, here's my profile for screens and link to full

  (continue below photo)

  

  Complete specifications

  http://Speccy.Piriform.com/results/ZRXCgJC8x3PrsszxBodRVhn

  From my understanding the cables of the screen white screens LCD is still, this problem started after the update of Windows 10 so I'm reluctant to think it's that. My laptop is still under warranty but do not want to send in if he didn't need that I need for work.

  I found some information online saying that a restore Image will not work, but I have an and you can try it if need be.

  Other information found online says that my computer basically "forgot" that I have a main display to get out information in and make the screen and that's why my second screen works perfectly and me might be able to solve this problem with the start of the saving mode and try to fix it from there again I've never done this and don't want to cause more problems doing things like that.

  What could be the best way to go forward with this problem is to say. :

  * Is there a way to check the LCD cables without disassembling the computer. (Don't want to do that, and don't think it's the fault)

  * System Restore will help

  * Where / who should I contact for help in this regard

  Thanks for any help provided and please tell me if you need any other info to help. I really want to to fix the problem rather than take it to a guy or HP

  whitescreenUser

  It's a bad screen. The upgrade of Windows 10 timing is a coincidence. You can continue to use it as a desktop computer with an external monitor forever.