HP 15-g092sa Notebook PC: my laptop won't boot

Similar Questions

• HP Pavilion Notebook - 17-f111: laptop won't completely close

  Windows closes but the laptop will not finalize.

  Hello

  You are welcome

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• 15-ab271sa Pavilion: Pavilion Notebook 15-ab271sa occasionally won't boot to the top

  Hello

  I recently bought this new laptop and have problems with it sometimes does not start windows.

  I see on the HP website there is an update of the BIOS for this machine which apparently addresses the problem that I am experiencing, but I'm confused because my current BIOS Version is not displayed in the list of previous versions of the software in the BIOS and when I run the softtware Assistant support installed on the machine there is no mention of an update of the BIOS.

  Either way, I did all the recommended software updates by using the help Wizard, but when I look at available updates on the Web Site for my machine there are numerous others proposed.  In addition, some updates are repeated as Rev A and Rev B, and I don't know what that means.  In addition, because there are updates for the other elements of software for different brands of hardware, I expected only these updates appear in the Support Assistant that relate to my particular machine.

  I would like any advice or comments on this situation before proceeding further.

  MB

  Hello @Mo42,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post on the matter with Notepad starts and tried to help you!

  There seems to be a problem with the update of the BIOS by the HP Support Assistant.  For now, you can download the BIOS directly from the HP site.  You can find the drivers for your product here: HP Pavilion Notebook - 15-ab271sa (ENERGY STAR)

  Once you update the BIOS and reboot the laptop, let me know if the problem is resolved.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP Pavilion 15 PC laptop: laptop won't boot up - stays on the black screen

  My computer was working fine and then all of a sudden the screen went black.  I turned the power on and it came up with the error message "Unmountable Boot Volume" and then tried to solve the problem but just stayed on the screen black and never solved the problem.  I turned it off, did the hard reset when I remove the battery and hold the power for 15 seconds, but it's always the same.

  I went into the mode where I can try to restore the computer but it does not allow me to do. They say it restores and then just black.   I also ran a report where it says that the problem is "short hard drive DST Check: failed ' and gave me a code of 0SNHWW-7N987K-MFPWMG-60WF03.

  If there is nothing that can be done to help me I would be really happy I have use this laptop for work and really need to get it back running of emergency with minimal cost.  Thanks a lot for your help

  @Amyynatalia,

  The pleasure is all mine!

  I'm afraid not, you will be asked to pay more for the replacement drive as its not covered by the warranty.
  
  Keep me posted!
  
  Kind regards

• My laptop won't boot at all

  Last Monday I was on my laptop and the battery came out while it's on, because then it does not start, I tried pressing F8 to start mode without failure, repair or mode and all I get is a white screen.

  I tried to boot from a Windows 7 repair of my CD drive disc and it gets to half way then fails. What is the problem with the system can be wiped and restored to factory setting or is it irreparable?

  You can enter the BIOS settings? HARD drive recognized and properly list?
  Set it to default settings please and try reinstalling the operating system.

• My laptop won't boot. All I get is a white, black screen with the cursor flashes in the corner.

  I tried boot cd of the Hiren s and changed the boot order to cd drive.  That did not work.

  My laptop is a compaq, about 8 years old and winxp.

  Press ctrl-alt-delete. If it works, go to file / new task, type explorer.exe. This brings to the top of the desktop computer? I wouldn't use Hirens CD. Go into the BIOS and change to the hard drive. If windows is installed

• My laptop won't boot

  It was then he shutdow because the battery is dead. When I tried to start, I got an error message saying smart error hard drive...

  Hi Babyhotso8512,

  Smart disk error indicates that the HDD(hard drive) of your NB is about to fail, or else he's done. So please try to run the HARD drive test and check.

  CHECK the link below to learn more about the Smart disk error hard and how do the HARD drive test.

  http://support.HP.com/us-en/document/c01443502

  I am an employee of HP.
  • Say thank you by clicking on the star of "congratulations" on the left
  • Make it easier for others to find solutions, marking my answer with

  'Accept as Solution' if it solves your problem...

• laptop won't start windows xp up.error win32k.sys?

  My laptop won't boot windows xp, to ask if I want to start windows normally or with guests orders or network in safe mode. According to what I try nothing works. It says: an error has occurred with win32k.sys. What is - this and how to fix it?

  Claire

  As you probably know Evesham closed to the public in 2008.

  I think that your computer is a portable computer. I can't access a free copy of the manual, but I imagine that you have a copy of the operating system on the hard drive in a recovery partition. Am I wrong?

  Before attempting to repair your computer, you will need to back up your data files on removable media. If the computer does not start, you need access to a second computer at home. Do you have a? If Yes is it a desktop or a laptop?

  I would also ask if you comfortable using a screwdriver to remove the hard drive of your laptop Evesham, put it on an external support which can be purchased via Amazon and its connection to a USB port on the second computer. These are not difficult tasks, but not everyone wants to take on this task. If not comfortable take your laptop to a local computer repair shop.

  As for the repair of your laptop once you have recovered your data files, restore the operating system to factory settings using the copy of Windows XP, which I think is more than likely in a recovery partition. It will be activated by single key, perhaps the F10 or F11 key or you can have an option in the menu that appears when you press the F8 key during the boot process. It also seems that Evesham commonly supplied recovery discs.

  If a factory restore does not work I would then test the memory.

• Satellite L20 260 won't boot to the top, every time it freezes with no reason

  Hi all

  I have a problem with my satellite of sad, after 3-4 days I installed a new operating system (tried with XP SP2 and Kubuntu) system does not boot to the top, every time it freezes with no reason, the only way is to perferom a new installation of the OS. What is a hardware problem, perhaps related to the RAM or HARD drive?
  x 10, Daniele.

  Hello

  It's not easy to tell if the problem is software or hardware related.
  You must install the OS from the Toshiba Recovery CD and again test the functionality

  If the laptop won't boot again freezes immediately after that installation of recovery CD, and then it could be a hardware problem.
  You can try using MemTest 3.5 tool.
  It checks the memory of a malfunction.

• HP G62 Notebook Pc: MY COMPUTER LAPTOP WON, T START

  my laptop won, t start when I press the button nothing! It doesn, t start

  Tell me please help me

  With most HP laptops the first thing that do is to unplug power removed battery and push and hold the power button for 15 to 30 seconds to reset the machine.

  After you have done that reset for the power back in and try again, sometimes get you lucky.

• HP-G62226TU: my laptop won't turn on when I push the power button

  Hello

  My laptop does not turn when I push the power button / stop and nor adjacent to the plug adapter lights turn on when I put the power supply. It behaves like completely dead. I pressed the button for 30 seconds as suggested in the following thread.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/my-laptop-won-t-turn-on-when-I-...

  My laptop is 2.5 years old and was working fine without any problems so far.

  Please suggest.

  Thank you

  Himanshu2303 wrote:

  OK... I learned to get the motherboard changed. How much it will cost in India for my laptop?

  What do you suggest I should do?

  How much will it cost in India?  I have no idea. I live in Europe.

  I suggest to ask a repair shop of PC or laptop.

  If the cost of repair is more than 50% of the current value of the laptop, you would be better sourcing of a notebook replacement.

• HP 15-g019wm Notebook PC: computer laptop Hp 15 is stuck on please hold start after downloading software hp

  I installed a bunch of hp updates based on research in this Web site:http://support.hp.com/us-en/product/HP-15-g000-Notebook-PC-series/6545564/model/6761879/drivers?lang...

  I followed the steps and then I headed to a page showing all areas BIOS chipset graphics driver realtek wifi card, etc... I installed all those who had support for my pc, including the chipset intel one. I installed them according to recent date from 18 to 26 September... I was low on battery then he died and I plugged it in later and restart.

  It will show screen hp, then my screen color of time and date then it will go to the black screen after destop seen with colors.

  Now, it is showing black screen please wait, then it stops for a few sceonds it will alternate blue and black whille sreen say please wait.it say please wait on the blue screen, then switch to black (nothing about this) and repeat.

  I can't access in the machine or in the connection section, I can however Boot Manager access. Need instructions.

  Please note when I bought this machine from Wal-Mart, I had no cd with it.

  I'm hoping to play and learn the bootmanager. Anyone know what I would do in the bootmanager?

  Hello @me-262.

  Welcome to the Forums of HP Support!

  I read your post on the laptop won't start does not and wanted to help you!

  Try to review the documents to see if you can get the rear system works again:

  HP computers - screen will Flash between a blank blue screen with a task bar and a desktop on startup (Windows 8) screen

  Computers laptops HP - computer won't start (Windows 8)

  If this does not help, then you can consider to perform a System Recovery, to put the laptop to its factory settings.  Please let me know how it goes.

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Have a great day!

• HP G62:. Hp G62, laptop won't turn on even after trying hard. Help

  My laptop won't turn. Home from work two days ago and I tried turning on but nothing works. I read through messages to hard test but failed. I don't hear any sounds on my laptop either. Can someone please help me understand what I need to do to get my laptop running. Thank you

  Thank you. . No light even after plug in the laptop. I've never seen a light on the power adapter even when he was working. Where is the light on the adapter? Please help I feel empty without my cell phone

• Satellite L300-20 d - my laptop won't sleep mode

  My laptop won't go in stand mode, the power of battery or sector. I have set all the necessary settings in power options in Control Panel, installed the latest display driver and BIOS update, but no change, can anyone help?

  This changed after my software Driver Scanner a updated driver, and since then I could not go back.

  Thanks in advance,

  Alan.

  Hi Alan,

  > This changed after updated my software Driver Scanner, one driver, and since then I could not go back.
  That's why I put t use these scanners driver or install driver updates. The most recent version is not always the best thing and the most important: never touch a running system!

  Usually the windows system restore needs are enable by default if you are able to restore the system to an earlier point?

  What version of Windows is installed?

• I stop my new laptop with Windows 7, install new updates. But now my laptop won't charge. There only dark blue screen. He won't even have to sign on the screen. Someone at - it happen?

  I stop my new laptop with Windows 7, install new updates.  But now my laptop won't charge.  There only dark blue screen.  He won't even have to sign on the screen.  Someone at - it happen?

  Hi ctgreen

  Welcome to the Microsoft Answers site!

  You can try the following and link methods under each method for more information on the same and see if one of them solve the problem.

  Method 1: Start the computer in last good known Configuration

   

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the button start , click the arrow next to the button lock , then click on restart.

  1. Do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start, and then press F8.

  1. In the Advanced Boot Options screen, use the arrow keys to select last good known Configuration and press ENTER.
  2. If your computer has multiple operating systems installed, use the arrow keys to select the operating system that you want to start using the last good known Configuration, and then press ENTER. Windows will then resume starting normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: Start your computer in Mode safe

   

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click on the Start button , click the arrow next to the lock button , and then click restart.

  2. do one of the following:

  o If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  o If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode and press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  When your computer is in safe mode, you'll see the words Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to access the desktop in SafeMode I suggest you read the article in the link below for instructions on restoring the system.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Concerning

  Varun j: MICROSOFT SUPPORT

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.