HP 15 Notebook P: Question of fiber

Similar Questions

• HP pavilion dv6 Notebook PC: question seeks to get drivers for my ATI Mobility HD7470M updated

  Can't find update drivers for my laptop Hp Pavilion dv6 smart who has the graphics card ATI Mobility HD7470M, once recommended with AMD driver auto-detect mess to the top of the resolution and the only solution to that is a system restore.

  AMD Catalyst center can't find updates for 2011.

  Thanks for the help

  See you soon

  Hi @lancer71 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your Hp Pavilion dv6 Notebook and questions with looking for a new driver for your ATI Mobility HD7470M.  The driver will change not only updated. If the device works properly I wouldn't try to change the system.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Thank you.

• SWR2048: Question optical fiber

  Guys, I'm trying to find an answer to a problem

  I have a campus that uses about 8 switch SRW2048 around campus.

  They will install the fiber between the buildings to improve speed (currently using Ethernet - very slow)

  Here are my questions:

  1. can I connect the fiber-optic lines directly in SRW2048 switches using their ports mini-GBIC, instead of going to a Media Converter and then to the ethernet line?

  2 should. what equipment I fill this?

  From my understanding, it's doable, but I get lots of different answers to make this work 100%.

  Any ideas would be greatly appreciated.

  These products are processed by the Cisco Small Business support community. (URL: https://supportforums.cisco.com/community/netpro/small-business)

• Question about fiber for 2911 modulus

  Hello

  I am kinda new in the world of fiber and would welcome some guidance on how to proceed on some confusion I have.

  We have an access provider that is given to the connection in single-mode fiber (LX) to 10 Mbps with a ST connector. We have a 2911 on site and I did some research on the modules and found the GLC - FE - 100LX module. So my question is this would not negotiate or I would be able to set the speed to 10 MB? IM assuming that this module is a connector LC so just need a cable to LC single mode fiber ST?

  Thank you for your help.

  I would check with the ISP if they actually give you a strangled 10 MB 100Mb connection.  An optical interface 10Mb is not very common these days.  100 MB transceivers not to negotiate at 10 Mb/s.

• Other notebook PC Questions

  HP ENVY TS m7 Notebook PC

  I have a problem with tent install a program of virus protection on my laptop, with 92% of the way through the installation, it freezes and comes up with the error messages on blue screen. Also I tried to find my laptop model by entering the product number and serial number, but the HP believes it does not exist or was purchased abroad, of which he was not. How can I know what my problems with this laptop?

  Hello @jh1909,.

  Thank you for your response.

  When I googled the error message you received I have found this Microsoft document control bug 0 x 124: WHEA_UNCORRECTABLE_ERROR which informs you that there is hardware problem.  That being said I would like to test the hardware in your laptop.

  Screening of hardware failures (Windows 8)

  Once you have determined the fauly part, you can see the interview guide and service for your laptop computer to locate the part number, if you are thinking to replace the defective part yourself.

  Good luck!

• HP 15 Notebook PC: Question of recovery

  When I tried to achieve the recovery last night, it gave me an error saying "Cannot find X:/src/recovery/rita-tool.exe" (or something like that) and I clicked on OK and reset it this PC option was always there and I was still in the Recovery Manager window, but the system recovery option was missing. I do not understand how this cause that happened I never touched or defragmented or did something unusual on the recovery disk. All if the automatic defrag was on but it in the application of defragmentation, he said that the recovery disk was never executed. So I don't know how this could have happened and I need help with fixing this so any ideas would be great. THX.

  I finally contacted HP and they said I was making the recovery of the bad way, she said that I need to use the computer reset instead of the Recovery Manager and if the problem has been resolved.

• My HP Pavilion Notebook has questions

  Recently, I turned off my PC then started to connect, once I had entered my password that the PC got stuck on the part "Welcome" (this is the first time, it has happened and that happened for two hours). I recently got this PC not a month ago. Before I shut down my PC I was do pop ups and asked to rate sites Web etc, I noticed that it seemed to be a virus but when I scanned it, no viruses were found. The only issues with my PC are internet and my trying to connect. I would be extremely grateful for the help please.

  Hi annanurdock4045
  
  peerone suggested its probably of malware, adware, Trojans etc.
  What antivirus do you use?
  I suggest you download following the latest software of their authentic sites: malwarebytes 1) free version - scan completely & remedy in threat analysis, 2) adwcleaner - run the download file n do a complete scan n remove all found threats, 3) trend housecall - a full scan (may take several hours depending on the size of the hard drive (, mine took 6 hours) & delete or correct any threat detected.
  
  After all this rebooting your system, download CCleaner on their website, install it do a full scan... do not change the settings. Click on correct after the scan.
  
  Restart scan with some another antivirus online scanner again, opt for trend housecall new scan online eset, do the download, install... sweep remove n or difficulty threats detected, if any. That's all.
  After all this, better do you windows defender after analysis to date for confirmation.
  
  post your results of the analysis... If you have found any threats in any of the scans after each of them,
  If it is a Trojan or a virus, you may need to restore your system to a previously affected State.
  
  Thank you
  
  Visruth

• Pavilion dv6: Windows7 HP Pavilion dv6 Notebook PC - questions Aeros

  Good afternoon

  I have problems with my Aeros.  There are blue/green vertical lines and distortion of picture/video.  I have tried to restore my laptop, nothing helped.  Troubleshooted thanks to HP Support Assistant, problems with my BIOS and video card.  Y at - it a update for the thesis that I can download and install?

  Here are my product number: XG874UA #ABA

  Thank you... I tried to update the drivers, has not helped.  Just talked to an old friend who is in IT, explained it would be too much to try to replace the graphics card in a laptop.  Says that this isn't worth it since mine is already 5 years old.  Guess it's time for a new laptop...

  Robyn

• HP ENVY Notebook m7: question of sleep mode.

  When the laptop goes into mode 'sleep', it not to turn back but when turn it off by pressing the power button, then restart it, it works normally again. How can I solve this problem?

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• HP G71 Notebook PC: problem changing BIOS

  Hello

  I just posted a question about having 4 GB of memory and the computer showing only 1 GB of physical memory.

  I saw through a post that someone recommended to go into the bios Setup and check a box and type 4096.

  The computer then rebooted and I had problems since.

  I need to be able to come back in my bios and change the setting to the value of the original.

  How do I do that?

  Thank you

  Bud

  Hello @budhines,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP g71 Notebook and questions with a BIOS error. I recommend to restore the default BIOS settings. You could restore the BIOS withthis document by selecting the reload the default BIOS settings.

  I hope this helps.

  Thank you.

• G7-1070us notebook Pavilion: Bios screwed up on update.

  Last night 07/20/15 bios has been updated and is now screwed, restart auto constant that happens and say that there is a bios problem.  Software of the BIOS on this site shows an older version.  How to fix?

  Hi @lone_lobo,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion g7-1070us Notebook and questions with a BIOS update. I recommend to restore the default BIOS settings. You could restore the BIOS withthis document by selecting the reload the default BIOS settings.

  I hope this helps you.

  Thank you.

• Envy dv4t Notebook: SmartPlacement on hard drive?

  Hello people,

  My younger son helps people bring their computers from the dead and lonely people gave envy dv4t Notebook in question here having decided to upgrade to a newer version. He has in turn gave it to me.

  I preferred App Defrag and after install and opening it, I see that the harddrve is not configured for SmartPlacement. Which is, of course, a major requirement for this application to function properly.

  I open the BIOS (which has a date of 2013 of origin) and see Nothing on SmartPlacement anywhere.

  Am I right in thinking, I might as well uninstall my Defrag app and just use the good old Windows Defrag?

  Thanks in advance... Mark

  God bless... Mark

  Hello new SDF15,

  Do you already have an application with a unique built-in function/feature the feature simply NEED becomes (for you) is just a function which all THE systems have?

  Well, even before receiving response from Raxco my dilemma and after watching again the problem, the answer has jumped off the screen of the laptop. 1, the hard drive is (logically) configured with the D:\Recovery of patitioned in car first on the disk. Then, of course, SmartPlacement, which is first reading the first partition is said that there is a problem here.

  The real C:\ drive shows SmartPlacement works very well!

  Once again, thank you for your patience... Mark

• Pavilion dv6500: HP Pavilion dv6500 Windows 10 update chart question

  I have a HP Pavilion dv6500 originally shipped with Windows Vista Home Premium 32 bit on it. I bought a copy of Windows 7 Home Premium and put it out there. Now that I've learned, I can get Windows 10 free on it. Launch day came and the app get Windows 10 indicates the graphics card is not compatible because NVidia has not done yet. I checked the NVidia website and they said to come to support OEM site. HP support site has not updated drivers. Y at - it somewhere that I can get the proper drivers if they exist?

  System Specs:

  Processor: AMD Turion (TM) 64 X 2 Mobile Technology TL-64 2.20 GHz

  2.00 GB installed memory

  32-bit Windows 7 Home Premium

  Graphics card: NVIDIA GeForce 7150 M / nForce 630M

  GameOn says:
  

  I met the same problem with my laptop. NVIDIA informed me that they will not update the drivers for the NIVIDIA GeForce 7150 M /nForce 630 M. their suggestion was to replace the motherboard or stay with my current operating system.

  See the fix in this thread, post #9:

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/cant-find-GeForce-7150M-nForce-630-M-driver-for-Windows-10/m-p/5175330#M126811

  I worked like a charm for me!

• HP Pavilion Notebook: automatic updates and messages fail

  Hi, when we automatically turn on my computer HP support assistant connects to servers HP utdates and messages. Problem is there is no far than ever. Collection and messages, is that he will. It doesn´t matter how long wait so he could get to the next step (configurations and so forth). This problem is ongoing since I came back from repair at HP. Help, please! I ve had nothing that trouble since I bought my computer!

  Dagg

  Hi @Dagg333,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook and questions with the HP Support Assistant works not properly. Here is a link to troubleshoot the HP Support Assistant.

  If this is insufficient, I uninstall and reinstall.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• HP ENVY Notebook PC m6: biometric device problem

  After I've updated for Windows 10, if I leave my active biometric device, my mouse pointer/cursor continuous flickering as if to show the system is busy.

  I'm on the latest version of the driver for my hardware. Now, I am unable to use my fingerprint as my password.

  The only way I knew to prevent this was to turn off my biometric from the Device Manager.

  So I'm more able to make use of my material, even if its there on my laptop.

  Please help me.

  HP Simple pass seems to work, but the problem is that whenever the biometrics is selected, the mouse pointer continues to flicker.

  

  Hi @Ashkal052,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your m6 HP ENVY Notebook and questions with the Simplepass works not properly. I suggest you uninstall fingerprint driver or reinstall the version updated driver and HP SimplePass ultimate installed and reinstalled the latest version for Windows. Here is a download for the reader of fingerprints for Windows 10. This download sp71729.exe should work for you.

  Please let me know how it goes.

  Thank you.