HP 15-r013ca Notebook PC: updated my wireless card to a double band and so I have the ability to use the available 5 GHz
How can I replace my card with a card dual band wireless, so I can connect to my disposal, 5 GHz and who to contact if I can buy this wireless card. Thanks for all the information and your time in this matter... Daryl
Because of the configuration of 1 x 1 antenna in your laptop, the only way you will be able to upgrade to able to use the 5 Ghz band is to use a usb wifi dongle.
Tags: Notebooks
Similar Questions
-
I had to update my windows computer and you can no longer open Photoshop cs2. trying to find help with this new system is not easy to use to put it kindly. I downloaded the program and don't have the available key. I tried to sign in but where.
For Photoshop CS2 activation has been reprocessed, so your original drive and the serial number does not work.
As an owner of CS2, Adobe has a copy without activation and serial number, to which you are entitled.
The serial number is to the right of the download link for Windows. You'll need this one, not your old number.
Get them here: download Acrobat 7 and CS2 products
-
Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Try to update camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the update I have the last update! Witch, I did not clearly. And my Photoshop have different camera RAW plug-in. 8.4 the old and the new 8.7. But it does not work. Have removed and reinstalled several times. What is going on? Why can't update bridge to the last version 8.7 or read my raw files from the Canon 7dmk2?
Try this:
http://blogs.Adobe.com/Crawlspace/2011/03/keeping-Photoshop-up-to-date.html#NotConnected
-
HP Pavilion Notebook 15 t ab100: updated my wireless card
My new hp laptop does not pick up my wifi of 5g, I was wondering if someone could give me the link to a wifi card that is compatible with my laptop card because my wifi 2.4 ghz is so weak it can barely download chrome.
Thank you!
Here is the service manual that you need:
The good news is that there is no BIOS block whitelist so that you can install any module wireless with the right form factor and the number of antennas. The bad new is that the removal and reinstallation of the wireless card is a serious surgical procedure.
See pages 43-51. Pay attention to this:
Ago 58 screws that must be removed, replaced or loosened when the service provider service allowed only parts. Take special note of each screw size and location during the removal and replacement.
The wireless card is not allowed for the replacement of the end user, so you are questioning the guarantee by. Also, your laptop can have 1 antenna wireless that will make almost impossible upgrade if it is true.
It would be the best card wifi HP offered and is really the best on the market in general:
Intel Dual Band Wireless-AC 7265 802.11 ac 2 x 2 WiFi + BT Combo Adapter (no vPRO) 784644-005 4.0
This is what it looks like:
This American an m2 card form factor and of needs wireless 2 antennas. It's not expensive:
If you need assistance.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
27 or 28 September 2010, a series of updates was installed automatically on my new Sony Vaio with Windows 7. I just bought the computer a week and half ago. After this series of updates has been installed, the wireless card would be the interface is no longer with the router. When I did a restore system before the update was installed, the internet worked. I left the computer load updates again - today, October 2, and again the wireless card would not work with the router. I removed the updates and the work of the internet. Please notify. I travel a lot and must be able to work online wireless.
Hello
1. what updates are?
2. what exactly happens when you try to go online after installing updates?
3. what operating system do you use?
Please answer these questions, that could help us help you better.
The next time that you install these updates, please check for red or yellow bangs inDevice Manager and send back the same.
Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Measures to check the application event log:
a. click Start.
(b) in the search box type eventvwr.msc , and then on enter.
c. now, click Application in the event viewer (local).
d. now, looking for event log on the right side of the event viewer window.http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-ViewerThe articles above can also be used on windows vista.
Also take a look on the underside of the articles that might help you.
Why can't I connect to the Internet?Using the troubleshooter from network in Windows 7
Use Network Troubleshooter event logs to solve network problems
Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Aspire 6930 update hardware wireless card?
Please indicate on what wireless card I should buy an upgrade? Reason and detail as follows:
I'm happy with my 6930 but my ISP has indicated that my WiFi (Intel(r) wifi Link 5100 AGN) card is not suitable to receive the wireless download 100mbs (although the specification of 5100 seems to advise that it is capable of "n" standard).
I am a resident using the Virgin Media Internet service provider, which has just improved my download speed broadband 60mbs to 100mbs to the United Kingdom. My PC is an Acer Aspire 6930 Lap Top - running Windows 8.1 64 - bit adapter card Intel(r) wifi Link 5100 AGN.
On ethernet I get the full 100mbs, but the wireless receive only 60mbs (exactly the same as before the upgrade)!
Virgin support staff have reviewed my system and concluded that the wireless card is the problem remotely. Have you contacted support Intel who advise I have contact Acer support for details of what card I need?
So my question is "what card to buy?
Hi Jack
A result I think - all kinds!
Your link provided was an older driver than I was using already, but it prompted me to search the site of Intel once again and see if there was something else.
I found the following:
This seems to work much better and speedtest.net confirms that I read now about 75mbs - not quite the 100mbs on ethernet, but a significant improvement.
I'll stick with that for now.
Please accept my grateful thanks for your time, expertise and patience on this one - you're a star.
Kind regards
David
-
whenever I try to access google, + it said I did not update to Firefox version and I have the latest version 5.0.1
WordPress also gives me the same message
Reset your user agent. Check out the Web sites or modules incorrectly report incompatible browser
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You must update some plug-ins:
- Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
-
I downloaded the update to iOS over-the-air 9.3 and installed. Setup cannot connect to the server to activate the ipad2. The message is to try again in a few minutes or connect to iTunes to activate. Yes, I have the most recent and current iTunes version, so this isn't the issue. iTunes recognizes the iPad as my ipad2, but cannot do what he done to be able to use iTunes to activate it. I have 2 iPads. iPad 2 and iPad 4th generation. iPad 4th generation downloaded on-line and updated and active and install without problem. IPad2 updated and not can not connect to the server to activate and I connect to iTunes to activate as the message says, but iTunes cannot activate because it sees my ipad2 and that's all that. Of course, I'll try again once activate WiFi tomorrow but any suggestions would be greatly appreciated.
Thand you
same problem with you jerryenea. This seems to happen ipad 2 only? my itunes cannot check my ipad
-
I have a Windows 7 64-bit system I bought a provider on the local computer for a long time with Windows installed.
I replaced my hard drives of 500 GB (mirrored RAID configuration) system with hard drives of 1 TB.
After replacing the readers, I also installed a set of Windows updates. We update failed. After you restart the computer, I ran Windows update again. It seemed that all upgrades completed.
HOWEVER, I now have the message "this computer is not running Genuine Windows". Windows Indexing is not running, send me problems in Outlook and elsewhere.
I saw discussions on the online forum on the problem "Not genuine" resulting from an update of Windows failed and resulting also to change the hard drive.
I led Activation (slui.exe 3) typed in the product key from the sticker on the computer and it activates OK but does not erase the message.
I clicked on pay online now and ran legitcheck.hta and my system has failed validation. The options are to buy or to perform a new installation of Windows.
I have a lot of programs installed on the computer, and I can't lose all configuration data and reinstall all programs. That would take several days and I would not have a system can be used in the meantime.
I ran the Microsoft Genuine Advantage Diagnostic Tool (1.9.0027.0) and have these results below.
There are a lot of files file mismatches and "tampered with". I believe that this is due to the update has failed.
I thought to manually rerun all updates that goes back to the date when first I struggled (about a month). However, I wasn't sure if this solves the problem or make worse it.
You can leave the data below what actions I need to take the next?
I am a independent and use this computer to work. I have backups of my data files, but it is many installed applications that I can't do without.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0x8004FE21
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - BJ6HF - KMG9Q-J439J
Windows product key hash: 7vmpu6718rYAfG77 + 92w0F + H5ks =
Windows product ID: 00371-OEM-9043973-76881
Windows Product ID Type: 3
Windows license Type: OEM System Builder
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {F07BA505-8A75-4DE1-A86D-1DE0A0C990B3} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: Registered, 1.9.42.0
Signed by: Microsoft
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.130828 - 1532
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: B4D0AA8B-604-645_B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x86)\Maxthon\Bin\Maxthon.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100Other data-->
Office details:{F07BA505-8A75-4DE1-A86D-1DE0A0C990B3} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-J439J 00371-OEM-9043973-76881 3 S-1-5-21-1148677520-472990491-2516340718 Gigabyte Technology Co., Ltd.. EX58-UD4P Award Software International, Inc.. F8 20090511000000.000000 + 00055213107018400FE 0409 0409 Time(GMT-08:00) Standard Pacific 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
Activation ID: e120e868-3df2-464a-95a0-b52fa5ada4bf
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00180-439-776881-02-1033-7601.0000-0992014
Installation ID: 011105233533098330628726208714444670448455661326055071
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: J439J
License status: initial grace period
Time remaining: 40740 minute (s) on (28 day (s))
Remaining Windows rearm count: 3
Trust time: 15/04/2014-15:56:27Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: n/a
Beyond: 0x000000000001EFF0
Event timestamp: 4:15:2014 16:05
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:
Altered the file: %systemroot%\system32\sppobjs.dll
Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Altered the file: %systemroot%\system32\sppwinob.dll
Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Altered the file: %systemroot%\system32\drivers\spsys.sys--> HWID data
Current HWID of Hash: MgAAAAEAAAABAAEAAwACAAAAAgABAAEAHKKujALwWHXoY8KP8BfeiPKuALa26c6b6oI =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC GBT GBTUACPI
FACP GBT GBTUACPI
HPET GBT GBTUACPI
MCFG GBT GBTUACPI
EUDS GBT
TAMG GBT GBT B0
SSDT INTEL RCM PPMHello Ray,
Please provide a detailed description of your query.
- What are the troubleshooting steps you have tried?
- What exactly happens when you try to run "slui 3 '?
The question may arise simply due to bad drivers from the Intel Rapid Storage Technology technology series. So, I suggest you to update the drivers Intel Rapid Storage from the following link.
In addition, please try to activate your Windows by phone, as described below:
- Click Startand in the search for box type: slui 4 and press ENTER.
- Select your home country.
- Select the phone activation option and brace yourself for a technical support representative get activated.
Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.
-
Satellite C660D - after update BIOS wireless card no longer works
Hello
Yesterday I Tempro message asking me to do an update to the BIOS: 'bios-20120601184846. I did but it was not reinstalled the wireless driver, and since my computer can't find any wi - fi network. I still have a working ethernet connection.I tried several ways to fix it and nobody has succeeded:
-J' installed the driver "slate-driver-s1081-win7-wlan-1005.31.1222.2011".
-J' installed from the toshiba Web site, the driver "realtek_wlan_win7_2000016L_20110523".
-J' tried a system restore, but he made a mistake and did not workHow can - I'm restoring my wi - fi connection?
Thanks for your help.Technical information:
Model: Satellite C660D - 104 Ref: PSC1YE-00Q001FR serial number: 3B097607K
Wi - fi card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC #2
Windows 7 64 bitPS: Sorry if I don't speak very well, I'm not English.
Hello
This means the card WLAN is not listed in Device Manager?
Some unknown device is listed in Device Manager?To be honest, this issue is not known to me but if it please try to set the BIOS to default settings and check again.
I put t know if this will help but you can back up all your data and install again recovery image to check if the same problem persists with the factory settings. -
I updated my iPhone 6 iOS 9.3.2 and I will have many questions.
May 19, 2016, I've updated my iPhone iOS to iOS 9.3.2 9.3.1 6. Initially he "BRICKS" on me. It would not be completed the update. Then he went into a continuous cycle of trying to update. And then he "restored" factory default with the downloaded 9.3.2 iOS. Then tried to sync and some of the apps wouldn't sync. Some of the apps that sync wouldn't work. E-mail would not work because it says that the password is not valid. Same thing with some of the applications that require a password. It was a number after another. How can I fix or there at - it a solution for this?
Try recovery Mode
Connect your device to your computer and open iTunes.
When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.
Keep now until see you the recovery mode screen and wait that he eat.
Restore first as New and test to make sure it works well. Then restore backup if you wish.
-
When you click the view option in the taskbar there used a page called option source. That's gone.
To view the Page Source, do one of the following:
- CTRL + U
- Right-click on an empty space on the web page (not in a text box) and choose "View Page Source"
- Click Firefox > Web Developer > view Page Source
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You must update some plug-ins:
- Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
-
Update Windows 8 stuck at 12% several times and now pasted on the screen of greetings
I have recently installed Windows 8 Pro on my laptop Win 7 Home Premium g6-2123US. Everything was fine until yesterday, when the automatic update attempted to install 10 updates. The update seemed to move forward but it was stuck at 12% for some time and then restarted and repeated the process (stuck). I left alone, and finally he restarted and greeting is displayed. Unfortunately, it does not strikes or actions of touchpad.
Any ideas for recovery?
Thank you
Bill
Most of these downloads are on the website HERE. Just install the.
-
code 8007045 D
Hello hopefulbob,
Welcome to the Microsoft Answers Forum!
You can try to run the Windows update tool given that updates do not settle. This tool is offered automatically through Windows Update on computers that have a condition that the tool could solve.
Here is a link to that contains information about the analysis tool:
http://support.Microsoft.com/kb/947821
If this does not work, try to reset the policy for the update of the Windows registry.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows
1. Click Start, type services.msc in the search box, and click OK.
2. double-click on "Windows Update" in the list and stop the service.
3 minimize this window.
4. Click Start, type regedit in the search box, and click OK.
5. save the registry and delete the following registry key:
HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate
6 go back, services and start the Windows Update service.
7. try to do updates now.
Try these steps and if this does not work, please get back to us with what are the updates that fail to install.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think. -
After update to Photoshop and Illustrator I have the error message
Hello
After update manually Photoshop CS5 v.12.0.4 12.0.5 and v.15.0.2 Illustrator CS5 to 15.0.3
(Because my virus program Kaspersky told me to do for safety reasons)
The two update went well.
But now I have an error message after running the application of updates from Adobe.
It is as if he does not notice that the two programs have been updated.
What can I do?
OK thanks you please try reinstalling Adobe Application Manager of http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773.
If you continue to experience difficulties, then we need to look at the logs for attempts to install the updates. You can find details on how to locate and interpret the log files to troubleshoot issues with install newspapers | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.
Maybe you are looking for
-
Developer Web Inspector without Console
Hello As a developer, I use the Inspector (Tools-> Web Developer-> Inspector) a lot to find the DOM elements. And I work with several different screen widths, I like the inspector at the bottom of the screen. Since lately, I seem to have a very small
-
language packs converts a message or a web page to tell Japanese/English or do you need a different program for this ability. Thanks in advance, tom.
-
I recently downloaded rockbox and my sound does not work so I uninstalled everything, but my sound still does not work. I have a sansa e250. I returned and deleted alll these settings my mp3 rockbox. So still I donot have sound. I tried reseting my s
-
Problems with my Nintendo DS.
Hello! I hope someone can help me because I really don't know what to try more. I recently bought a WRT 160N v2 and My Nintendo DS simply REFUSES to connect to the Internet (when it used to work perfectly with my previous router, a USRobotic). First
-
I have an asus p4p800 phones and I can't seen, find a download for an audio device. I have the cd that came with the motherboard to install it, but he says that he doesn't support Windows Vista. any ideas?