HP 4630: HP 4630 will not print Windows Edge 10

Similar Questions

• Photosmart Premium C309A: C309A Fault Protection to access the properties of the printer and will not print (Windows 8.1)

  My C309A, connected via USB, my system worked very well through the life of WIndows 7 and Windows 8.1, until this week.

  I did run the software in PS_AIO_05_C309a_Net_Full_Win_WW_140_408 - 4.exe and then this week I received notice that there was a software update. I downloaded and installed PS_AIO_05_C309a_Net_Full_Win_WW_140_408 - 5.exe, and now my printer does not print.

  I uninstalled the previous version, without error and installed this new version, also without error. But, when I click on printer properties

  

  I get a protection fault.

  

  If I try to print a test page, the system hangs for a few minutes, then the devices and printer page is closed (with no message).

  I tried the Ethernet connection instead, but that made no difference.

  Interestingly, even if printing does not work, scanning and fax are. I can connect to the scanner from Paperport or Adobe Photoshop Elements.

  I uninstalled the software several times and tried both the old and the new, and they both do it.

  I tried to run print and Scan of the doctor. Who says that the driver is missing some files and to uninstall and reinstall, but I did it at least 6 times without success.

  Any ideas?

  Thank you

  Stan

  FWIW, I have set the printer by improving the system to 10 Windows (which went very well). It works fine now.

• HP officejet 4630 will not print on both sides of the paper

  Unable to print on both sides of the paper. The backsideprints first, then wait for the ink to dry, front end starts to print then stops with a windows error message popping up on the screen saying cannot print the document.

  I found that I can't print multiple pages either. For example, I decided to print the document of 4 pages in the form of simple pages only (since double-sided would not work) and the results were first page print second page prints on a third, and then just stop with error message this printer cannot print the pdf document. If I had to select each separately page to finnally get all four printed pages. HP print and scan diagnosis says theres no problem. Windows diagnostics says there is no problem.

  Obviously there is a problem can offer advice and the solution?

  Thank you

  Kimoho

  To all,

  Thanks a lot for your suggestions. I would like to point out that the problem was solved and printer works fine.

  The solution is one of the two things?

  First, I opened the windows firewall and allows all applications and processes to pass through. There may be a few dozens of them, some have been verified and how some have been blocked. I checked all except those who started with 'remote '.

  Second, I went on the printer software and returned the IP address of the printer. It was the same as the IP address, but somewhere on the microsoft blog, I read that windows and routers sometimes lost the IP address. That's why I'm re-entered.

  I don't know which of these fixed the issue, but one of them did.

  Thanks again

  Kimoho

• HP Officejet 4630:4630 will not print both sides

  When printing from Wordperfect or other software gives me is no longer able to select 2 sided.  If I select the file > print, I like the pop - up printing.  I then click on properties, I give myself the pop-up page layout.  I click on advanced, and given a screen than ever, I remember having seen it before, it has only three options in this regard: paper/output, graphics and Document Options.  The Document Options has only an option, print in grayscale

  How can I get my print double-sided rear?

  I only did the following two steps:

  • Uninstall the software. Uninstalling the printer software
  • Reinstall using the printer HP install wizard for Windows.

  And it worked.  Now, I can print double-sided.

  But, the installation wizard has been a pain.  He kept cancel my download just before he finished, and he took a number of re-tent before it worked.

  Ted

• Test will not print Windows 7

  Have a Windows XP like original computer and have set up a network with the new Windows 7. Have set up sharing on both computers with XP as the master computer. Shared printer is HP 8500 A909g. All this appears on Windows 7 and the printer is, but when I reached the framework of execution of the 'test' of the printer page, absolutely nothing happens. The printer is set up on the XP via USB. Tried to install the printer on Windows 7 software, but received a message that is inconsistent. If it makes any difference, the network is implemented via ethernet. If a solution is available, I'd love to hear what to do. Heads up: I'm not very smart about this stuff.

  Here a few links to the site of HP Suppaort for the Officejet Pro 8500 A909g that can help:

  Diagnosis of HP and utilities for Installation:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03291586&cc=us&DLC=en&lang=en&LC=en&product=3752459

  Assistance for issues related to installation issues:
  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=21946&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3752459
  All "solving a problem" supported including wireless:
  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3752459

• HP officejet 4630: HP officejet 4630 does not print

  My printer is not printing. When I try to print now come but it dose not print. I tried to print from 2 computers and same problem. Also tried turing the printer works but the problem persists.

  

  Hi @MichalP,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP Officejet 4630 e-all-in-one printer with a computer Mac OS X 10.11 El Capitan and the printer will not print even though it now says "Printing". I would like to help with that.

  You mentioned that you tried a second computer and it did the same thing. The second computer is a Mac as well?

  I would start by doing a Reset of the power on the printer. Maybe the printer is in an error state.

  

  It looks like the image that you tried to load didn't download successfully so I'm not able to see what it was.

  Please let me know if the power reset helped, or if you need further assistance. If you need to return, please indicate which operating system and uses the second computer.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• printer Laserjet 1020 upgraded to windows 8.1 will not print PC HP Envy H8-1503

  Hello

  was wondering if anyone has problems printing of victory 8.1, used doctor HP printing and scanning and said everything's fine but a test page does not print as I can't print anything from another category windows 8.1. using windows 8 that I had no problem printing, I've updated all the drivers

  Also when I connect my laptop using windows 7 it prints, and with them turn off the printer laserjet 1020, then plug in the USB cable and windows 8.1 it will be printed.

  But when I turn off the 1020 laser jet, then turn it back on then try to print windows 8.1 that it will NOT print

  Thanks Mike

  Hello

  I understand that you can not print with Win 8.1.

  Drivers for win 8 and 8.1 Win are the two Version 9.
  Make sure that you uninstall the previous printer software.

  Here is a url to completely uninstall a printer in Win8.
  http://www.YouTube.com/watch?v=-M0GVVcwT-o

  Restart the computer.

  Reinstall the software of the printer again. Select full features software driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4131&LC=en&cc=us&DLC=en&sw_lang=&product=439320#N173

  If you need more simply make assistance let me know.

• Brother HL-2240 printer will not print after installing Windows.

  original title: MS upgrade on Windows XP

  Help, please.  I installed the recent update of MS for XP and now brother HL-2240 printer will not print.

  KB982670 seems to have something to do with .NET Framework 4 Client Profile.  This update or Windows PowerShell have been updated "critical", then maybe you didn't need to get.  However, it's water under the bridge now.

  When you open the print queue, are shown print jobs as stuck there?  Just to make sure that the queue is cleaned, do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type each of the following commands in the command prompt window and press ENTER after each line

  • net stop spooler
  • del "% windir%\system32\spool\PRINTERS\*.*" {answer Y when prompted}
  • net start spooler
  • output

  It's really only a shot in the water, but he could help and can not hurt to completely uninstall and reinstall the printer.  Follow the directions here: http://www.coribright.com/windows/Article_One.htm

  Get the complete installation package here: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/004500/dlf004515.html?reg=us&c=us&lang=en&prod=hl2240_us_eu&type2=1&os=7&flang=4&dlid=dlf004515

• Dell Inspiron 7520: Printer will not print multiple pages after upgrade to Windows 10

  I have upgraded to Windows 10 and now my HP printer will not print multiple pages. The printer is set to print documents from the spool. Thanks for any help!

  I uninstalled everything related to my HP printer (in the Device Manager: printers and print queues) and searched my computer for everything related to my HP printer and deleted stuff also. Then I reinstalled the drivers and software from the HP website. I have updated Java also (I have no idea how much this has to do with my impression). I have my printer is off and unplugged for one minute before Relighting. I restarted my computer and now it seems to be printing normally. Praise the LORD!

• Reference Dell 926 printer will not print after installing Windows 7

  After the upgrade to Windows 7 my 926 printer will not print. I followed the suggestions found here (unplug the printer on the wall, remove the brick, low load patch R166248 to delete the printer, the latest driver to load, R146832 dated 26/01/07, reboot). Restarts, driver going through complete installation process then I get an error at the end of the process, "the Dell Photo 926 Printer printer driver is not installed". I did this several times. In addition, I restarted the spooler to print several times. No luck. Additional suggestions on how I can get my 926 to work with Windows 7?

  Greg,

  I think that we all regret our first wedding, well most of us.

  Removal of print jobs is a way of really nice to get rid of your documents. After you restart your computer, you should be able to run the fix, Manual printer removal driver and restart once more. Try it to install the Vista drivers in compatibility mode, I used Vista SP2.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Change Vista compatibility. Then, install the appropriate drivers. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  Rick

• After you configure the new printer Hp Officejet Pro 8625 on Windows 7, it will not print the page of 'test' I need help!

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  Thanks to everyone who responded to my help regarding my Hp OJ Pro 8625.  After all, I ended up doing a clean reinstall of my MS Windows 7, and reinstalling the Hp JO 8625 Pro software and that's all working now.  Some hoe there is a glitch in my Windows 7 that did not leave the Hp software to install correctly.  Once again thank YOU ALL!

• Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

  Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

  There is no Windows 7 driver for your printer, BUT...

  HP provide instructions that should get your printer working at least... follow them to the letter...

  BTW, the printer MUST be connected through a USB cable...

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01796821&LC=en&DLC=en&cc=us&product=75939&lang=en Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Brother MFC-7420. Usually, it works on Windows 7, it will not print and I have to unload the coil and switch off the printer before Relighting.

  I use a Brother MFC-7420. Usually, it works under Windows 7, but from time to time (maybe 1 in 20 times) he will not print and I have to unload the coil and switch off the printer before Relighting. It is not always the case, but it is enough times to be a nuisance.

  Ideas, people?

  Hello

  This problem occurs when you make changes to the computer?

  Method 1: Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: Refer to this link: I can not print from my computer via the USB port.

   
  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/FAQ/000000/002700/000006/faq002706_000.html?reg=us&lang=en&c=us&prod=mfc7420_all&page=FaqEndPage
   

  If you have problems, I haveinstall updated printer drivers, see this link:
  http://www.brother-USA.com/downloads/default.aspx?PgId=5&R3ModelID=MFC7420

  Refer to this: update the drivers for hardware that does not work properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also: printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps!

• Photosmart Plus B210a will not print on the Windows XP computer, but works on the Windows 7 computer

  I just got a Photosmart Plus B210a printer. I was able to install it using the wireless for my Dell Dimension 3000 3 GHz computer with Windows XP 32-bit SP3. He will answer analysis, but it will NOT print, it doesn't matter what I do. I have a Netgear wireless router. I tried the Dell connected directly to the router using a USB of Netgear WG111v3 USB adapter and cable. No impression whatever the configuration.

  On the other hand, I was able to make the printer work with an Athlon II X 4 630 with Windows 7 Professional 64 bit AMD machine. Everything works independently to know if the machine is connected directly to the router Netgear or using the above USB adapter.

  How can I make work B210a with my Dell with Windows XP? Is this a problem XP because Windows 7 has worked perfectly, but Windows XP would only scan.

  Subsequently, I deleted all initially loaded B201a software. At the printer detects the network, then reloaded the software from the CD. The printer then worked fine. What a relief. Perhaps the problem I had previously was linked to my trying to use the USB port when the printer originally did not work.

• black and will not print on hp Photosmart Plus B210a of Window Vista model

  black and will not print on hp Photosmart Plus B210a of model

  The post here could help solve the problem.  Be sure to check the vents.