HP 4645: SAVE INCOMING FAXES TO COMPUTERS HARD DRINE INSTEAD OF PRINT?

Similar Questions

• Digital fax on computer - when the computer is offline, what is happening to the incoming fax?

  I have the HP all-in-one Officejet Pro 8600, and it is on the network.  I recently put to save incoming faxes as digital files on a computer on the network and it works perfectly when the computer is available.  My question is this: what happens to incoming, if the computer is offline or unavailable fax (as if someone shuts down the computer)?  I want to just make sure that faxes are not 'lost', and they will be printed or recoverable in some way.

  Hi Memjay,

  I understand that you have an Officejet Pro 8600 that you put in place the digital archiving of faxes to a network folder, and you have just a question about it. I will do my best to answer this question for you!

  If your computer shuts down, and the printer had to receive a fax while it was turned off, the printer should hold that fax in memory (can generally hold up to about 30 pages in memory) and then when your computer is back on and pull has refreshed (generally set to 5 or 10 minutes) faxes in memory should appear in the network on the computer file. This document of setting up digital fax HP to save faxes received on your computer has a before you Begin section that explains just that ideally, you want to leave the computer at any time, but once again the printer there little memory to contain faxes until the computer is back on and looking faxes again.

  I hope this helps to answer your question, have a great day!

• OfficeJet Pro 8500 A909a 'Fax to PC' is on, but still prints faxes automatically when received

  Had a problem with the reception of faxes and reset the machine.  Since then I can not fax just save to the computer only.  It will save the fax to your computer, but it also prints when it is received.  I use XP Pro on a desktop computer.  I don't get any errors.

  Hi jb9522,

  Recheck your settings for the digital facsimile of the fax machine basic configuration of the control panel and check out the following document below.

  http://support.HP.com/us-en/document/c01619066

• I can save fax instead of print it?

  With a M1217nfw Pro LaserJet I have not found a way to tell him to keep the incoming faxes on the computer instead of print. Is this possible.

  With the 1217, save on computer ONLY works via a USB connection. But now works. Unfortunately it doesn't seem to be a way of telling the printer WHERE to store received files and what format to use (TIF or PDF).

  The only documented way to see received files is done by the newspaper of the HP Toolbox view, Fax except that several received files do not display it. I found that the location of the file in Programdata and a shortcut on the desktop allows me to see that easily.

  In any case, it is now closed.

• I have an HD camera that records on SD cards.  How can I save raw images to a hard drive without import it at the FCC and then share?

  I have an HD camera that records on SD cards.  How can I save raw images to a hard drive without import it at the FCC and then share?

  YYou want to save raw images, but not all? Is that what you mean? When you import into FVP you can select the songs you want and you can set the library in the Inspector to record the files on any player, anywhere.

• Where is my Officejet 7410 incoming Fax go?

  I created my old Office jet 7410 to work with a new computer running Windows 7 Professional.  I downloaded the appropriate software (I think).  Scanning and printing to work perfectly.  Work of outgoing faxes.  Incoming faxes are different. The rings of the machine, said a fax was received.  Printing newspaper also said very well received fax. PROBLEM: no regular paper has printed.  I don't know where or not at all its stored.  Try reprinting of memory and nothing is displayed.  Searched my C drive and nothing there either.  Where is my fax machine? How do I actually print a fax machine?

  The problem has been fixed... everything that was needed was a line filter.  Once I got one from Radio Shack and plugged in, faxes started coming thru!

• 7640 envy: Envy 7640 fax passes but does not answer an incoming fax

  Passes the test fax setup but doesn't answer incoming fax

  Hi @Charlcar1,

• Want 7640: my fax does not automatically accept incoming faxes

  I've just set up my new printer. Although my fax is configured to accept incoming faxes, he can't get them automatically. If physically, I press the button "I agree", the fax will come through. I checked my settings to make sure that I put it correctly to respond automatically, but it will not. What I am doing wrong?

  Thanks in advance, Tracey

  Hi Tracey,

  First of all make sure that the phone cable is connected to the port 1 on the back of the printer and not badly connected to the port 2EXT line.

  Then click Fax, and then click the icon or settings button.

  Select Preferences, then select auto answer and make sure that it is set to.

  By the same preferences menu Select a distinctive ring and make sure it is defined as all the rings.

  Now follow and verify if the fax automatically accept incoming faxes.

  Shlomi

• Do not feed paper for incoming faxes, officejet pro 8600 premium

  I have a HP Officejet Pro 8600 Premium.  Recently I started having a problem with my incoming faxes.  An incoming fax comes through, and when it will feed the paper to print, it shows on the screen that it is paper.  He goes through the process of trying to feed paper through and makes the sounds, it does usually when I am out of paper in the feeder, but I'm not.  It prints and copies fine.  Just having this problem with the incoming fax is not able to print.  Help!

  Too bad!  I found the problem.  This is a printer 2 bins and sort my incoming faxes were trying to feed from the 2nd drawer (which was empty).  I have no idea how the setting has been changed, or how to restore it, but I'm not worried about it, now that I know what it is.  I was able to print any faxes that never came through (all 24 of them, Ouch!)

  Thank you!

• Incoming faxes

  Incoming faxes can be routed directly to the PC (such as .pdf documents) (similar to scanned documents) instead of being printed?

  Printer is a Photosmart 7525/cz046a

  Hi kvetch.

  Unfortunately, archiving of digital fax to PC is not supported on the model you have (Photosmart 7525).  This function is currently only available on most of the OfficeJet models.  I hope that you will continue to find your Photosmart precious for you, however.

• Fax does not recognize the incoming fax signal

  Fax does not recognize the incoming fax on Officejet 6700.

  Hey Bills6700,

  Welcome to the HP Forums!

  To not recognize the incoming faxes, I've included the document "cannot send or receive faxes. I know that's not the exact error message you get, but the steps will always help you.

  If you are still having the same problem after troubleshooting, could you please answer the following questions.

  1 is on a dedicated phone line fax machine, or is it shared with another phone?
  2. are you using a separator, or is plugged directly into the phone jack fax line?
  3. the phone cord is plugged you need two wires of copper at the end?
  4. do nothing missing on the fax test report?
  5. do you have an answering machine (physical box), or voicemail (you must call to access your messages)?
  6. What is the rings before answer on?

  Please let me know the results for the troubleshooting steps.

  Thank you.

• OfficeJet pro 8620: how to set up printer to turn on automatically when you receive an incoming fax on a dedicated line

  I want to configure my printer to turn on automatically when receiving incoming fax. Do I have to leave power or can I change the setting to turn on automatically with each incoming call. He is a dedicated fax line that is not connected to my computer. Also there is a sleep mode, the power led remains on when you use the sleep mode?

  Hi @mcqwats,

  Welcome to the Forums of HP Support! I see you want for your printer HP switch automatically when an incoming fax arrives. You have not the possibility to activate the automatic answer - on, but the printer must be turned on so that this function executes.

  There is however no way to set the preferences to activate the printer when it is off.

  I hope that answers your questions.

  Thank you

• 6700 Offiejet incoming fax in color will not print. How can I change this?

  The manual and online 'help' each say to change the incoming fax print option but do not say HOW TO DO THIS!  This work through the control panel of the printer or online or WHAT?

  Hello spahjrp

  What I found in the manual which has been if ECM (Error Correction Mode) is selected color faxes cannot be received or sent. Try to check if it is on / off. If off try toggling the option.

  To change the setting of the ECM from the control panel

  1. from the home screen, tap (right arrow), and then select Setup.

  2. press Fax Setup, and then click Advanced fax setup.

  3. Select the Mode of Error Correction.

  4. Select on or off.

• HP Officejet Pro 8620: Pro 8620 incoming faxes will not desktop folder

  My Pro 8620 will no longer send incoming faxes to a folder on my desktop.  How can I make him again?  All the information are in place to do this, but for the last 2 weeks, it is not.  Nothing has changed to the extent that nothing else.

  Hey @dvd57,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the fax to a folder of your 8620 e-all-in-one printer Officejet 10 Windows PC. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off.
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute and reboot your PC.
  3. When the lights come back on the router, turn on the printer.

  Please let me know if this allows fax to send to your PC. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• How can I get notification on xp pro pc client of incoming faxes to the fax of windows server 2003 Server

  I have a fax server installed on a windows 2003 server.  I configured xp clients to be able to fax.  I am able to get a notification if I send a fax from the pc.  However, I'm unable to get a notification of incoming faxes.  Is there a way to do this?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Please post your question in the Windows Server 2003 forum.

  http://social.technet.Microsoft.com/forums/en-us/1355/threads