HP 6310 print waste

Similar Questions

• Install HP Officejet 6310, printer all in one

  I loaded and began to run the instalation of the complete software for the HP Officejet 6310 printer all-in-one on my new Dell Inspiron N7110 Notebooks. It runs Windows 7-64 bit. After the end of the excerpt, it stops just running. It should go in the installation process, but it doesn't. Can someone help me?

  See if you can find the folder of extraction of HP that he created, then run the installer in there.

• HP 6310 printer all-in-one - wireless network with a mac?

  It's the hp 6310 printer while a capable with a mac (macbook pro) wireless networking?

  Well Yes, I just need to know what version of Mac OS X you are using to give you specific instructions.

  Make sure that your printer is connected to the router with an Ethernet cable and the printer is turned on.   Now, reboot the router by unplugging the power then plug back.  Wait for it to restart completely (about 60 seconds).  Then:

  -Go to the Apple (top left of your screen) menu > System Preferences > Print & Fax.

  -Click the "+" at the bottom of the white rectangle.

  -Your Mac will find your printer and the list.  Click on it once and click on the button 'Add', once it is available.

  Its just so easy.

  Your printer is ready to use.  Scan of him using apps preview or Capture of Image (in your Applications folder).  Press scan on the front of the printer does not work with 10.6.

• I just replaced the black cartridge on my HP Officejet 6310 printer and get a message that I need to replace the cartridge. What is the problem?

  Officejet 6310 printer will not print.

  Again - the cartridge and DATED?  Did you remove all plastic covering the nozzle before insert?  Have you read in the Quick Installation Guide that you have when you first set up the printer?

  If still no joy and it's a genuine HP cartridge, contact HP and get them to replace it.

• HP Document Viewer 7 OfficeJet 6310 printer ActiveX controls all in one

  I get error message "activex controls accept only fonts that are defined in graphicsunit.point.

  When I use HP Document Viewer 7 to get my scans or images. I have a HP OfficeJet 6310 printer all-in-one.

  I uninstalled all the drivers and software HP, restarted the computer, and then re-installed using the latest version of the software and I still get the error. I used this file to install - AiO_071_000_201_000_CDA_Default - Full_Network_AmericasEuro1_NB.exe.

  I had the same problem.  Mine is now fixed.  I uninstalled HP 6310; uninstalled for Microsoft NET framework 1.1 security update (found in the downloads). reinstalled the HP software.  Everything is scanning, opening and printing fine for me now.

  (Unplug the printer from the computer and turn off the printer before you uninstall.  Wait to connect the printer to the computer until the software is reinstalled.

  I hope this helps!

• 6310 printer

  6310 all-in-One

  Installed new color and b & w cartridges.

  Focus shows only the color... No black.

  Why black not print?

  I cleaned the well under the black cartridge, using filters to coffee as absortments.

  Sopped all dirt.

  Who does the work.

  The cartridge was new, but I wiped that, according to the indtructions, anyway.

• Is no longer able to print on a network HP 6310 printer - printing error (works fine, now the printing error returns)

  Was printing fine, no problem, then had problem with printer HP 6310 showing as offline while he was online
  Fix this problem by unchecking the box SMTP on the printer port.
  Now shows that it is printing, but after a minute or so, it returns an error ("error printing")

  Interesting, when I try to cancel the document does not print, I have to click Cancel to remove the document - the first time I get a "send error" - the second time, the document disappears.

  • I am running Vista home Premium (64 bit) on computer laptop Dell Studio 15, updated with Service Pack 1.  This error has occurred even after a cold reboot.

  It worked very well - I think that the original problem (printer showing as offline) happened after a hibernation, but problem now Vista think it's printing (after turning off SMTP setting on the printer port), but it's not.

  Hello Ibusby2000,

  Thank you for using the Microsoft Answers forum.  I suggest to go to the manufactures website and download the latest drivers and or updates.  You can also remove the printer and add it again.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install HP Office Jet 6310 printer all in one

  I have windows 7 Home Premium and I am unable to reinstall my Office Jet after I factory restored my computer a virus. The ref system flags me to tell me that my system will not support this printer/scanner/fax. I need to Windows 98, Me, 2000 or XP.

  Original title: HP Office Jet 6310 all in one

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Try printing HP and Scan Doctor for Windows
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

  Good luck, you need to update or reinstall the latest driver.

  HP Officejet 6310 all-in-one printer drivers<-- set="" to="" your="" version="">
  Windows
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=1119598&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP Officejet 6310 All - in - One Printer - Support & Troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=1119598&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Solve printer problems (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Open the printer (Windows 7) Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP 6310 print blank Pages

  HP 6310 all-in-One models on 2 Macintosh running OS X 10.5.8

  The printer prints completely blank pages or half empty. Photocopier prints nothing but blank pages or page with a slight outline of ink. When you run a printed report, full color ink appears on the paper.

  2 color ink cartridges have been installed in the last 3 months, 1 black in the last 3 months. No ink low messages are displayed, or the error messages for this question. Problem occurred for about 3 months.

  Thank you

  Hello

  What are the results you get when you check the ink levels and do a self-test as page described in the document below?

  http://support.HP.com/us-en/document/c00634261

• HP 6310 PRINTER: SOLUTIONS CENTER HP

  WHEN THE HP SOLUTIONS CENTER IS ORDERED TO OPEN, A WINDOW POPS UP SAYING: "NO HP DEVICES HAVE BEEN DETECTED - SOLUTION CENTER WILL BE CLOSED. THE PRINTER WORKS PROPERLY. I'M PRINTING FROM THE DESKTOP DIRECTLY AND WIRELESS FOR MY LAPTOP. WITHOUT THE WORK OF THE SOLUTION CENTER, I CAN'T SCAN PHOTOS OR DOCUMENTS.  THE FUNCTION OF HP SOLUTIONS CENTRE HAS ALWAYS WORKED IN THE PAST. I UNINSTALLED AND REINSTALLED THE FUNCTION WITH THE ORIGINAL CD.

  Hi @19JLC70,.

  Welcome to the HP Forums!

  I see that the HP Solution Center is saying, "No. HP device detected," on a Windows Vista-based computer. I'm happy to help with this problem!

  I suggest the following:

  • Uninstall the software. Uninstalling the printer software.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. Turn Windows Firewall on or off.
  • Create a new user account. Management of accounts of users and connections (Windows Vista).
  • Reinstall using HP Officejet and Photosmart full feature software and drivers.

  If these steps do not resolve your problem, please consult this guide to scanning, how How to Scan: Windows Vista. Select how to scan without HP software and you'll see a few other methods of analysis without the HP Solution Center!

  Hope this information is useful and thanks for posting!

• 6310 printer cartridge problem

  With the help of HP cartrudges

  Started having light images

  Replace the black print cartridge

  Get message to replace the left cartridge

  Equip the new color cartridge

  Still got the message

  Pulled both cartridges

  clean the surfaces of the color cartridge and replaced

  Black Cartrudge had holes on both sides of the contacts, imk all gone

  Replace the black print cartridge

  Still got message to replace the left cartridge

  Message won't go away

  Have no option other than replce printer?

  Thanks for the comments.   Had done all this, had used the cartridge for a week or more.

  Due to the ink that elapse in what is below the cartridges (twice), I gave up the battle and suspended for another printer, HP, another, a HPIJ 6600 AIO.  A mMore cartridges to have problems with but well.  Thanks again for the feedback.    This a a GREAT source of help...

• HO Officejet 6310 all-in-one: 6310 print only 1/2 of the first photo on 2 5x7s

  I use HP photosmart Essential 3.5 on Win 7 pro 64 - bit Home to print photos, I am printing 2 5 x 7 photos by 8.5 x 11 pages, the printer load photo paper and sometimes sends an error "on paper", I hit ok and it prints but it prints 1/2 or less of the first photo and any 2nd photo the quality is great, just want to print the entire photos and no ink on half of the photos, any help would be great thanks.

  Thom

  Thom,

  Sometimes, the results depend on the program you're using to print.

  Test the printing of two photos on 'plain paper '.

  Make sure that the media type is correctly selected (Photo paper)

  Try / consider:

  Try to print pictures using Windows Photo Viewer > as well as other settings, check that you have enabled "Copies of each image.

  

  Reference and examples:

  Print - Programs_and_Methods

  Section:

  • Photo printing with Windows for Windows Photo Viewer

  Paragraph > print Photo on the main plate

  -----------------------------------------------------------------------

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Office Jet 6310 printer all in one

  The cartridge made a rattling noise very strong when he moves to the right side of the printer.  I cleaned the entire accumulation of ink but the clicking continues.  There are no other problems.  The paper and the scanner works and now the printer has been clean the large prints.  Does anyone know why he would do this noise?

  Thank you

  tl2222

  Some noises can expect that the printer is being used more in addition to overtime. The documentation that I found on the printer by clicking when the carriage moves in the machine indicates that we should remove the cartridges one at a time and inspect and also inspect where they adapt the machine to ensure that they are not damaged and to check the debris or the broken parts in the channel of distribution. Also, you stated that the printer has been cleaned. Where the rolls of paper cleaned too? Paper dust can accumulate on the reels of overtime can also lead to the printer with rattling noise.

  Finally, I would like to try a hard reset.

  1. With the printer plugged directly into a wall outlet and turned on, unplug the power cord from the back of the printer.
  2. Then unplug the power cord from the wall outlet.
  3. Wait at least 30-60 seconds
  4. Plug the power cord into the wall outlet first. If a module with the power cord, make sure that the light of the module and then reconnect power cord on the back of the printer
  5. The printer should turn itself back on, but if not to use the power button on front panel to turn on machine.

• HP officejet 6310 printer xi

  error message "carriage jam".

  To Jam on Officejet 6310xi transport problems, there is a document with useful measures to try to resolve the problem. The document can be accessed here.

  Let me know if it helps.

• HP Deskjet 6310 all in one: Deskjet HP 6310 all in one wireless printing functions

  I have a HP Deskjet 6310 printer all-in-one and want to know if this printer has wireless capability (i.e., can this printer receive orders for wireless printing)?   (Note, I have a new MacBook Air wireless with send feature).

  @NickC3

  Your printer:

  All-in-one printer, HP Officejet 6310 range

  The printer specifications indicate the printer works with 2 USB, a wired Ethernet connection and - with an adapter - with Bluetooth to be printed.

  Thibault system requirements:

  • USB 2.0 full speed, front and back ports