HP officejet 6310 printer xi

Similar Questions

• Install HP Officejet 6310, printer all in one

  I loaded and began to run the instalation of the complete software for the HP Officejet 6310 printer all-in-one on my new Dell Inspiron N7110 Notebooks. It runs Windows 7-64 bit. After the end of the excerpt, it stops just running. It should go in the installation process, but it doesn't. Can someone help me?

  See if you can find the folder of extraction of HP that he created, then run the installer in there.

• I just replaced the black cartridge on my HP Officejet 6310 printer and get a message that I need to replace the cartridge. What is the problem?

  Officejet 6310 printer will not print.

  Again - the cartridge and DATED?  Did you remove all plastic covering the nozzle before insert?  Have you read in the Quick Installation Guide that you have when you first set up the printer?

  If still no joy and it's a genuine HP cartridge, contact HP and get them to replace it.

• HP Document Viewer 7 OfficeJet 6310 printer ActiveX controls all in one

  I get error message "activex controls accept only fonts that are defined in graphicsunit.point.

  When I use HP Document Viewer 7 to get my scans or images. I have a HP OfficeJet 6310 printer all-in-one.

  I uninstalled all the drivers and software HP, restarted the computer, and then re-installed using the latest version of the software and I still get the error. I used this file to install - AiO_071_000_201_000_CDA_Default - Full_Network_AmericasEuro1_NB.exe.

  I had the same problem.  Mine is now fixed.  I uninstalled HP 6310; uninstalled for Microsoft NET framework 1.1 security update (found in the downloads). reinstalled the HP software.  Everything is scanning, opening and printing fine for me now.

  (Unplug the printer from the computer and turn off the printer before you uninstall.  Wait to connect the printer to the computer until the software is reinstalled.

  I hope this helps!

• Can I use a printer HP Officejet 6310 on windows XP, vista and 7

  Original title: HP Officejet 6310 printer

  I have two computers, a desktop computer running XP Pro and a laptop running Vista.  I recently bought a laptop running Windows 7 64-bit.  Can I use a HP 6310 printer on all three?

  Hello

  Windows Compatibility Center shows that this printer is compatible with windows XP, Vista and 7. Drivers for all the operating system three are offered by HP, so you should be able to use this printer on all three OS.

• Officejet 6310 ink cartridge

  I just bought a used all-in-one Officejet 6310 printer. I do very little color printer and have another printer for when I need to print in color, so wonder if I should have an installed color printer cartridge works.

  Yes you can.  Just remove the color cartridge and the printer will enter in what is known as a backup mode.  The printer will ask you every time that you print if it is correct continue without the cartridge, and there is no way that goes.  However, it is possible.

• Officejet 6310 does not print in color but Mac prints a color scan

  Officejet 6310 does not print in color but Mac prints a color scan

  Awesome!

  Thank you very much.

• Officejet 6310 all-in-One fainted during the printing and copying

  I have an Officejet 6310 all-in-one.  I have Windows Vista.  Yesterday, I replaced the black cartridge with HP98.  Now when I make copies or print a document, print the page gets more light and more light, about 1/3 to 1/2 through the page and very light down by a horizontal white line through the text.  I cleaned the cartridge with a damp cloth, I ran the command of cartridges clean but also align the cartridges.  I turned off the printer and unplugged and restarted again.  When I run a self-test page, especially the black line went up to 2/3 of the way, then it is empty at the top and gets darker, then the last 1/3 is fine.  The test pattern shows a few holes in the grid to black.

  I just checked the cushion under the black ink cartridge and it is saturated with ink.  I don't know that is where the problem originated.  I would be very grateful of any advice to solve this problem.

  Thank you.

  Is it a HP cartridge or a charging/reman?  It seems to be a faulty cartridge.  If it is an original HP, then check the warranty of the cartridge as shown here.

  It is unlikely that the ink that you see in the field of the service station is the issue.  The ink that you see is the result of the normal maintenance routine that the printer uses to keep the printheads from clogging.  It is normal that there is ink in this area.

• Cannot print in color of HP Officejet 6310 all-in-one

  I have a printer all-in-one color HP Officejet 6310, connected to the network. The ink levels are fine - I just bought new ink.

  The printer cannot print in color, my computer Windows laptop, no problem, but will print in black & white Mac.

  Why? Y at - it an option for color printing that I haven't checked? How can I fix?

  go to the icon of the Apple at the top left > system preferences > printers and scanner/print and scan / print and fax.

  remove the printer using the "-" lower-left next to the icon (+)

  After you remove > press the plus (+) icon.  > Click on 'Add a printer or a scanner', if it has given you this opportunity.

  in the new window > click on the name of your printer. Then check the bottom > NAME, LOCATION, PRINT USING (USE).

  Make sure the part "USE" or "PRINTING to AID", it should be the AIRPRINT printer name not.

  Then ADD at the bottom right. > try to print in color now.

• Cannot print from a scanner - printer all-in-one HP Officejet 6310

  Original title: cannot print scanner

  I just got a windows vista-based computer, and I can't print from my scanner. The diagnosis says that the

  scanner it works correctly. Can anyone help. the computer does not display a scan or a screenshot.

  I use a HP Officejet 6310 all-in-one printer.

  Hello
  
  What exactly happens when you try to print any file?
  
  Try to print a test page and check what is happening.
  Reference: http://windows.microsoft.com/en-US/windows-vista/Print-a-test-page
   
  Also, please refer the Sub articles that might help you.
   
  Solve printer problems
  Change your default printer
  What are printer permissions?
  Printer in Windows problems

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• HP Officejet 6310: Broken printer HP Officejet 6310?

  When I broke the power connector HP Officejet, the cord of the HP Officejet 6310 to the power adapter, I broke the HP Officejet 6310. So I used a power connector HP Deskjet 1000 replaces the HP Officejet 6310 power connector, and when I plugged everything in, I got a reading on the screen HP 6310 power "Reset". Is my broken HP Officejet 6310? Or you do NOT know yet because the HP Deskjet 1000 power connector is not compatible with the HP Officejet 6310? Please let me know. Thank you!

  Hello

  The HP Officejet 6310 uses part # 0957-2175, which is

  http://www.Amazon.com/HP-0957-2175-AC-adapter/DP/B002MB9ERK

  and the HP Deskjet 1000 part #0957-2286, i.e.:

  http://support.HP.com/us-en/document/c02435664

  I don't think that the power supply for HP Deskjet 1000 has enough power for the HP Officejet 6310 or is not compatible. But we don't know or some other factors. You must spend $15 to buy the right power supply for HP Officejet 6310, this is the only way to ensure that it is still alive or not.

  Kind regards.

• Cannot connect HP Officejet 6310 for Mac OSX 10.5.8 Dl624S wireless network usage

  I'm new to Mac . I have a HP Officejet 6310 and a Macbook Pro running Mac OS x 10.5.8.

  My printer works when connected to my Macbook directly using the USB cable. The problem is when I try to print when my printer is connected to my D-Link router via USB and my Macbook has a wireless connection to the network. The printer is not found.

  I can print from my computer Dell laptop on the network wireless but not not using my Macbook. I am only able to print from the Macbook if connected directly to the printer.

  When I try to manually connect to the printer by typing the IP address I get the following error: "could not connect on your device setup assistant.

  I also tried to add the printer using system on PPI Protocol preferences but no joy there either.

  Thanks in advance.

  Sinead

  Hello

  Thank you. This helped me to solve a similar problem.

  I have an HP 1022n compatible IP printer on my network, but could not install it with any HP installers. It does not appear in the device lists, and I couldn't add it manually via the IP address.

  Using the Mac printer setup I was able to install it, but nothing happened when I introduced printing to it.

  At the end of the day, I deleted the printer via the Mac printer setup and reinstalled using "HP Jetdirect - taken" under "HP Laserjet 1022 - Gutenprint v5.2.3" and Protocol as the printer software.

  That did the trick.

  The printer still does not appear in "Utility from HP" or "HP Installation Wizard", but at least I can print to it.

  / Soren

• Download software for Officejet 6310

  I downloaded the software and I'm trying to install it for the model 6310 AiO, but Windows says that the file is corrupted and stops the installation.

  The download is probably corrupted and cannot be used. If please remove this download and try to redownload HP Officejet 6310 all-in-One printer full feature software and drivers .

  Please click the White Star of KUDOS to show your appreciation

• Officejet 6310 all-in-One: can't send faxes from the computer screen

  We use an Officejet 6310 all-in-one printer. Computer of my wife, a laptop Toshiba Satellite Windows 7 Professional, has suddenly come to the point that it will no longer send faxes from the computer screen. We get an error message that something must be installed or reinstalled. We have lost the CD of the software provided with the printer. We can send a fax if we have a document printed to power the machine, and we can print faxes. We lose a lot of paper and ink because of this problem. Help, please.

  Hi GregsterMc,

  Given that the Fax icon is not displayed in the window of printers and devices, you need to uninstall and reinstall the software again. This should solve the problem.

  Thank you.

• Officejet 6310: cartridge error

  I regularly get messages "Cartridge error" as follows: "both cartridges are not intended for this printer" or "both cartridges must be replacred" or another message saying something like the cartridge on the left is incompatabnler & needs replaced.

  My solution has been to remove and reinsert the same cartridges that have been installed. Sometimes, I also have to slide the cartridge door by hand from left to right the printer. After going through these gyrations, the printer will work for a few days and then one of the same error messages appears & the printer stops working until I reintall 1 or 2 cartridges and/or slide the cartridges on the right side of the printer.

  Hi @txquacker,

  Welcome to the HP Support forums.

  I understand that your HP Officejet 6310 all-in - One Printer shows "cartridge error: one or two cartridges are not intended to be used to this printer ' error, which is temporarily solved by removing and reinstalling the cartridges and sliding manually the carriage from left to right." I would like to help with that.

  Here is a specific document on this issue - ' cartridge error: one or two cartridges are not intended to be used for this printer "Error Message."

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!