HP 8600 more Pro: AFD on HP 8600 Pro Plus stop detection paper

Similar Questions

• 8600 pro Plus scanning for paper A4 on Mac

  8600 pro Plus scanning for paper A4 on Mac

  I'm unable to scan A4 paper on my device of 8600 by using the HP scanning Application. I have validated that I use the latest software/firmware.

  I can print on A4 paper just can't sweep.  Any help would be appreciated.

  Hi TLC20,

  Thank you for your answer! I was wondering if you are able to copy with A4 paper.

  In the meantime, try the following:

  Load A4 paper on the ADF clash.

  On a Mac, click the Apple icon, click System Preferences, click Print & Scan, select your printer in the list, click the scanning tab, then click on open Scanner.

  Make sure that the document feeder is selected not to dish. Then change the format of A4 paper.

  Hope this helps you and have a great day!

• Problems when scanning double-sided printer Officejet 8600 Pro Plus

  Hello everyone

  I recently bought a printer HP Officejet 8600 Pro Plus (CM750A n911g)

  I am facing difficulties when more than one original double face scanning by ADF.

  A single page works fine, but with several pages it works in about 10% of cases.

  This is what is happening.

  In normal situations, side of first page the page is parsed, page is hit, second side is scanned, new page flips and ejects the page.

  But there are times that when the first side is scanned the first page is fed into the ADF, the second page we begin to slide into the ADF, because the upper feed Dungeon rollers turning at this time here in time.

  For the moment that first page trying to flip the machine 'sees' the second page and decided to eject the first page without analyzing the second side. It begins directly to scan the first side of the second page. (image is reversed 180% because the machine "thinks" it is the second part of the first page)

  This is happening (not always, sometimes some pages are treated as it should be) up to the last page.

  Last page is always correct, since there is no next page more to disrupt the process.

  Anyone know what to do to avoid this behavior? The paper used is normal paper 80g.

  I installed the latest version of the firmware in this machine (CLP1CN1304AR)

  I'm starting to think that this could be a bug software and superior power rollers run too long.

  I've tried different settings and this happens when starting a scan of the computer, but also when starting a scan of the screen touchscreen printer.

  Thanks for any answers

  Kind regards

  Ronny

  This one is over.

  For those who might be interested, he has focused on the machine.

  Machine update itself to works and always the latest version of the firmware very well

  Good bye

• Officejet Pro 8600: Officejet Pro 8600 will grab not photo paper

  I bought HP printers for decades. The quality took a nose dive. My 8600 will grab not photo paper. My only previous simply stopped printing using all colors... it looked like version a printer a ransom note. I won't buy HP again. It is too bad HP sold me 80 lb paper then their printers do not print it. I spent hours on it and am VERY frustrated. I have in my office purchase 3 8600 s and they all have the same problems (more). Shame on you HP.

  Hello

  HP Officejet Pro 8600 support up to 66 lb bond paper, the paper you use is too thick and not compatible with the printer.

  Below, you can find specifications of paper, check paper tray capabilities that list of all media supported for Tray 1:

  http://support.HP.com/us-en/document/c02858465

  Kind regards

  Shlomi

• Trying to COPY with HP Office Jet Pro 8600, returns without the message 'paper mismatch '.

  HP officejet PRO 8600 Plus.

  MAC OS 10.5.8

  Just installed the printer on Friday.  Has taken some time to work on the wireless, software updates, the record.  It prints and scans very well, but when you try to copy I get this message:

  "The detected paper does not match the chosen size or paper type. Make sure the size or paper type is correct continue the work. »

  I had to review all trouble shooting for several hours. Without success!

  Hi Skylacker,

  You did make sure to install the complete package of features? If not, you can download it here

• Scan to computer HP 8600 Officejet Pro Plus problem.

  Scan to computer on with my Officejet 8600 Pro Plus printer not working in my office.  I can use the Scanner by typing the IP address in Internet Explorer.  I am running Windows 8 Pro.  I have a connection through a router from Qwest Wireless.

  Aelmquist, if you upgraded your system to Win8 to an another earlier version of Windows, you will probably need to uninstall the printer software and reinstall. First of all, make sure you delete the printer from programs and features, Device Manager and devices and printers. After you restart your computer, follow the link below and then install the drivers and full software features.  I guess that your machine is 64-bit, but if it is not you need to go back and download the 32-bit version of the long drivers.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=4132&product=4323659&sw_lang=

  Doing this and let me know how it goes!
  

• 8600 catches the edge of paper awkwardly-wrinkles

  As the paper out of the printer, each sheet has a little crease on a section of the tip of the paper, as if one of the rolls of food he crushed a bit. This March the appearance of the product finished. What can I do about it?

  Hi there RYas, welcome to the forums

  I understand that your Officejet 8600 shows that food a paper. I would say after all the steps below for that matter.

  Printer paper tears, wrinkles, or is damaged when the all-in-one printing

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a nice day

• HP Pro Plus 6800: error 0 x, 00000057 wireless and wireless Direct properties of the Windows Control Panel printer - print a Test Page

  I have a laptop Toshiba Satellite of Win7 64 bit and a HP 8600 Pro Plus,
  update firmware and drivers about 2 weeks for the 8600 was a
  a long time I have been updated, which is connected wireless has decided to
  Direct to print Wireless Setup once the program installation, I tried to do a windows
  Print the Test Page in the printer property Panel, somewhat normal for
  set up a printer

  Under the connection of the conciergerie, I got the error message 0 x 00000057
  Under wireless direct printing, I got the same error 0 x 00000057

  After spending the time to check the settings, connections and asking
  Why? I decided to see that if I could print the docs, I print a PDF file,
  Notepad and Word documents in each application under the two
  configurations without problem.

  Under the wireless connection, I started the Web Services module
  and was able to make the impression within the Web Services Test page
  module without problem could not yet do the printing Test Page
  in the printer properties panel.

  I ran Print and Scan doctor who, to my surprise mentioned
  a conflict of Driver, I welcomed this program to uninstall the driver,
  went looking upward for the driver and the same driver was so done
  No download but to remove the driver and reinstalled the driver.
  Always error message here.

  I'm now tempted to delete a direct print wireless and see
  What happens if the error disappears, if she does not unstall all
  associated with the printer and do a clean reinstall. In case of emergency
  is there an alternative to the use of the Web Service module to the setting
  When not connected to the wireless network?

  I think that the Panel of the printer would do this (I'll watch this later

  spend enough time on it), or do I need to run Web Services to

  direct wireless installation, just think about this, otherwise I'll shoot

  a usb cable.  Maybe if I install Direct wireless on the printer control panel

  the message will disappear as the installation of the printer program, not software

  on the laptop?

  It is a minor problem since I can still print but question why!

  See other issues about this error message I thought

  spend my experience with this error.

  Always had a number of things to think and try, once again.

  If your getting this error message I would suggest trying a test page printed

  within the module of Web Service to see if the message developed.

  Could not back the driver so I removed the printer driver

  by deleting.

  19/07/2011 Date print driver
  Print driver version 26.0.0.0

  and removed software in Add and Remove software Hp also had to turn

  disable the wireless module directly on the printer to reinstall from the CD.

  Reinstalled printer/software form the CD supplied with the printer, the

  Driver date is 08/12/2009 Ver.9.0.0

  No more error in configuration.

  is the answer to the error message 0 x 00000057 or 0x00000xx

  associated with the driver? Or just the 0 x 00000057?

  Could not find a list of drivers between the driver and

  the driver on the CD.

  Will not update the driver for a good while or until I have too.

  The dates on the drivers are only about two years apart, the

  The version numbers are an issue questable.

• I get this message error - "sorry, a serious error has occurred which requires Adobe Premiere Pro to stop. We will try to save your current project".

  So I had [already] CS5 on my computer. I wanted to move to the new first Pro CC. So, until I did research on the passage, I just uninstall old Adobe all files my computer to ask a table open for my new download [first Pro CC].

  I am a beginner with the 30 day free trial, then initiate the payment once the trial is over. I did everything what I had to do to install the latest version of Adobe first Pro CC.

  Whenever I click the first Pro CC icon, it starts to launch upward, and about 5 seconds and it gives me the error "sorry, a serious error has occurred which requires Adobe Premiere Pro to stop. We will try to save your current project"and stops immediately...

  I have a 27-inch iMac [2014] new nice.

  I have enough memory and ram.

  What is causing this error? For more information on this would be greatly appreciated.

  

  -Justin

  I have resolvet

  Hi Jose,

  Seems that it crashes when GPU processing.

  Go to the file/project settings/general and change the rendering on "Mercury Playback Engine software only" engine.

  Press OK, you will get a dialog box in which select "remove previews."

  Try these steps and see if it works.

  Kind regards

  Navdeep Pandey

• 'First Pro has stopped working ".

  Just installed app CC on a custom, seller-built, Intel Core i7-3720QM CPU @ 2.60 GHz computer laptop, then downloaded the PPro CC. (before CC app on laptop, I already got CS6 Production Studio Premium installed).

  CC of the body seems to have installed correctly, as well as the CC of the SOUL, but I get msg that "First Pro has stopped working".

  Device Mgr shows:

  Graphics Intel HD 4000 and

  NVIDIA GeForce GTX 675M

  Clicking to let Windows find a solution does not help.

  These details:

  Signature of the problem:

  Problem event name: BEX64

  Name of the application: Adobe first Pro.exe

  Application version: 7.0.0.342

  Application timestamp: 5176598d

  Fault Module name: StackHash_1dc2

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 0000000000000000

  Exception code: c0000005

  Data of the exception: 0000000000000008

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  Additional information 1: 1dc2

  More information 2: 1dc22fb1de37d348f27e54dbb5278e7d

  Additional information 3: cbc5

  Additional information 4: cbc5ec6970b2af35927ad67117ca57e2

  Read our privacy statement online:

  http://go.microsoft.com/fwlink/?linkid=104288 & clcid = 0 x 0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  I'm not a tech-head, I used and welcome users experienced/well informed solutions.

  Thank you.

  Hello

  Please try to update the map of 4000 intel HD from the link provided and try to run. Once the map is updated, restart the machine.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=22605

  Kind regards

  Vinay

• Problems with getting the MacBook pro bluetooth to detect client devices he already never associated with.

  Hello.

  I am unable to get my Macbook pro to detect devices, that it has never been previously connected.

  The Macbook pro is detectable by the Bluetooth devices, but I don't seem to have an option to be able to detect the client devices.

  My macbook pro gives the possibility to be discoverable - mode client for example, I want to discover clients for example, speakers, headphones.

  My bluetooth speakers or headphones work fine on my Ipad so I know the beat headphones works well.

  The pro macbbook is detectable and I can connect by Ipad or phone for her, so I don't know the bluetooth on the Macbook works fine.

  Once coupled display in the area of discovery - and can be connected to.

  I think, basically, it means that the Macbook pro connects as a client - but I don't see an option to put in Server mode.

  How can I do so that it looks non-paired devices - I use 10.11.5 (15F34) attempts to connect to the Beats headphones.

  I have reset PRAM etc.

  I even tried plugging an external bluetooth USB adapter - this did not provide additional options.

  Concerning

  You have removed the devices you are trying to connect to the MacBook Pro? BT devices may only be connected to one thing at a time.

  Barry

• 2007 Macbook Pro Wifi stopped working

  Out of the blue, the Wifi on my 2007 MacBook Pro has stopped working.  He said "turn wireless on" and the button lights for click, but when I click, nothing happens. Went to the Network Diagnostics and did the same thing - same result.  Guess the airport card is shot.  Nothing else to try?

  Thank you, Mary

  Try a reset of the SCM.

• Satellite Pro L500 - stops when the power cord removed

  Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

  Someone please help. I have not installed anything new.

  Hey,.

  For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

  I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite Pro A10 stops after 15 minutes of internet games

  Hello
  When I play games on the internet such as zuma, scherwoods my laptop sat pro A10 stops after 15 min of game
  When I start my laptop it read disk
  What can do what
  [email protected]

  Hello

  I think overheating is the problem. First of all, you can try is to clean the machine properly. I guess the CPU and graphics card works very intensive and produce a lot of heat. If the equipment cannot be cooled properly the laptop stops suddenly.

  Clean it up.

• OfficeJet 8500 has Pro Plus: elimination of printer

  Just to check what I've read.  I want to give my Officejet 8500 a Pro Plus but am concerned there may be personal information stored somewhere on the printer.

  Are there other data stored on the device, for example information copied from documents?

  If there is, how to remove these data.

  Thank you.

  Hello

  The only information stored in the device are the journal of faxes (a list of the last 30 fax jobs), any content as an original document copied is never stored on the memory of the device itself.

  From the Configuration Menu, select Tools, and then click Restore Factory Defaults and confirm.

  That should erase any personal fax header information / details, recall lists or fax log.

  Kind regards

  Shlomi