Officejet Pro 8600: Officejet Pro 8600 will grab not photo paper

Similar Questions

• OfficeJet 7500 broad a eject not the paper correctly what impression causing paper jam

  My Officejet 7500 a new large format ejects paper entirely causing the paper jam when printing larger documents on A4 plain paper printing. Is there a solution to this and is this a known problem?

  @TomAA, have you tried to do a hard reset with the printer?

  Hard Reset:

   

• OfficeJet Pro 8500 will reinstall not connection

  Hello!  I'm terribly frustrated and don't know what to do next.  I have a printer all-in-one HP Officejet Pro 8500 A909g wireless that is about 3 years old.  Recently, I replaced my laptop for a HP running on Windows 7 64 bit.  Easily, I installed this printer on the phone two months ago and had no problems.  However, over the weekend, while on vacation, I tried to install another printer hp (5510).  I had the disc, followed instructions, etc.  But the printer would not work... period.  I ended up uninstalling.  But for some reason, try to install this printer screwed up of all impressions.  It's a different story, but I finally got my Adobe PDF printer works again.

  Back to today... I'm trying to print something and realize my 8500 printer is listed under "Devices and printers" and all programs are installed, but it will not be printed.  It shows no communication with the printer.  I am sure that he had to do to try to install the 5510.  After hours of troubleshooting, I finally uninstall the 8500 and try to reinstall.  (Remember, it worked fine before this past weekend!)  I downloaded from HP site because my installion CD does not support Windows 7.  For some reason, all the drivers will not download.  I tried FOUR TIMES.  I ran troubleshooting, diagnosis... you name it.  The printer appear in the programs, but not the devices and printers.

  I have connected the printer via USB directly to my computer and it has yet to install correctly.  Wired and wireless configurations show no connection to the printer.

  I'm not an expert, but can generally understand things.  I installed this printer even on three different computers all current to run Windows 7 and have never had a problem.  Help, please!

  Curiously, I did this throughout this process today, and it could find the drivers of 4 numbers.  Being extremely frustrated, I decided to restore to a point before that I tried to install this second printer (which I am certain is the root of all my troubles).  By some miracle, it's what needed!  Everything works now.  Thank you once again, Shane, for all your help and patience.

• Satellite Pro A200 will remain not off while AC is plugged

  My Satellite Pro A200 refuses to stay switched or hibernation mode, while the charger is plugged.
  When it is running on battery, it shuts off and Hibernate normally.

  If I understand correctly he runs a program or service that prohibits the system to Hibernate or stop.
  First to find this program or service.
  Than with msconfig.exe.
  First mark all non ms to start services. Try Hibernate. If it works half of services enable and try again. This way, you will find the service that is causing the problem.
  If this isn't a service try the same thing with the start up programs in msconfig.

  Good luck!

• Workstation Pro 12 will be not client 32-bit Vista autofit then resizes of the host window

  I use 12 Pro Workstation on Windows 7 64 bit.

  I had a VM Vista 32 - bit desktop 11 step, I had put for the prompt automatically resize to fit the host VMware window.

  I upgraded to Workstation Pro 12, open the virtual machine and updated for compatibility of 12 jobs. I started it up and everything was fine with the resizing as a guest before to match the host window.

  Then, I've updated the VMware Tools. And now, if I resize the window host VMware, Vista clients sound USB connect/disconnect bongs, and after a few seconds, the host window snaps back to its previous size.

  It is the only VM 32 bits that I have, but with Windows 7 64-bit and Windows 8.1 VMs version 12 VMware Tools work very well and comments autofit works exactly as it did before.

  All work around (other that the no upgrade VMWare Tools)?

  Thank you

  Alan

  Same thing happened for me (Vista 32-bit). Same guest machine worked well with Workstation 8 but update to hardware of Pro 12 caused the automatic adjustment to stop working for this particular machine. Windows 10 and Windows 8 virtual machines work fine.

  Interestingly, I found that disabling the hardware acceleration of 3D (under the virtual computer screen settings) solved the problem for me - which is something I had to do to solve another problem I had. Not sure if you have improvements 3D accelerated or not, but it can be worth it.

• 8600 unable to print photo paper or paper cardstock: Firmware fix

  HP has recently released an updated firmware for the 8600 series printer.  The firmware has several product improvements/corrections.  Here is the list:

  (1) improve the Diagnostic ePrint for ePrint Setup report
  (2) improve the ease of wireless configuration
  (3) integrated Web of enhanced Services
  (4) improving the print quality
  (5) improve ink consumption
  (6) improve the performance of path of paper
  (7) to improve the performance of numerical analysis

  The firmware version is CLP1CN1304AR and was released on 21-03 - 2013.

  As mentioned in 6), the performance of path of paper has been improved and this was achieved when printing with the cardstock / Photo in the 8600.

  There are 3 different versions of the 8600 and I'll give you the links below for the download page for this update of firmware for each.

  Basis of 8600 (N911a or CM749a)

  8600 (CM750a or N911g)

  8600 premium (N911n or CN577a)

  For more information about how to perform a firmware update in the 8600, click on the link below:

  http://support.HP.com/us-en/document/c02919168

  Hope this helps people with paper choose questions in the 8600 series Officejet Pro line.

• Ink laser jet pro 200: numbers of HP photo paper

  What are the numbers of HP Paper Photo quality for printing my color Laser printer?  I'm having a hard time finding just the photo Laser paper.  Everything seems to be for inkjet.  I think that HP made the printer, they probably have the book I need to go with it.  I want the paper to be like paper, I get prints of the store.  Just a few light paper every day.  Thank you.

  Hi @nicats,

  I see by your message you want to read a paper that you can use with the Laserjet Printer. I'd love to help you.

  You can use any multipurpose paper, bright white is recommended for LaserJet.

  Here's the color HP Laser Photo paper (glossy) for printers Laser - 8.5 x 11 Q6608A information.

  Most Laserjet printers supports the following type of paper: paper (bond, brochure, colour, glossy, heavy, paper header, light, photo, plain, preprinted, prepunched, recycled, rough), transparencies, labels, envelopes, thick paper.

  16 to 43 lb (up to 59 lbs with HP laser glossy photo paper)

  If you have any other questions, please provide the full name of the printer.

  How can I find my model number or product number?

  If you appreciate my help, please click the button below the thumbs up.

  Good day!
  Thank you.

• My new HP Officejet Pro 8600 will not analyze superior at 300 dpi of the location of the single document.

  My new HP Officejet Pro 8600 will not scan more than 300 DPI when scanning individual photos on the glass plate. I do not use the document feeder. I use this printer wireless on an iMac and a PC.

  Hello

  You can pass the value of hp scan: launch of the demand application, select the shortcut to scan (PDF or JPG to the left) and change the resolution you want and save.

  This will send down the printer settings. So the next time you scan, the printer uses these settings.

  Good impression.

• OfficeJet Pro 8600 will not feed photo paper. post 'message of paper '.

  I went through all the troubleshooting steps. Clean the roller, etc. the printer will be fine plain paper feeding, but not the photo paper. I use new paper, shiny and Matt brand HP. Suggestions? I n ' t had this printer a year yet, but it's out of warranty. I use Picassa with Windows 7

  Hello

  I see that you have a problem with the printer print on photo paper. I would first do a hard reset with the printer.

  Hard Reset:

  Unplug the power cord from the printer and the wall

  Wait for 30 seconds

  Then plug the power cord into the printer, and then on the wall (make sure that you plug into the wall and not a surge protector)

  If this does not resolve the problem, I suggest installing a replacement driver. Sometimes the default driver does not trigger the sensors to pick up different than the 8.5x11 paper size.

  You can follow this thread Shane and install the drivers from 990c. 

   

  Also, do not forget if you can find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.

  I really appreciate it!

  Let me know the results.

  Thank you!

• OfficeJet Pro 8600 (CN578A) will not feed photo paper.

  New N911A will not feed paper tray default photo. It gives an out of paper message. Regular paper feeds very well. The optional feeder is not installed (I have not). This is a brand new, out of the box machine replacing a C7280 with failure of distribution of ink. I used this article to all my printers previous HP with no problems. This is HP Advanced Photo paper (66lb/10.5 mil, sense of self)

  Just got off the phone with HP... my printer BRAND NEW so... Remove the tray paper... tip top printer has left... using a clean t-shirt... Clean the gray rubber roll... a little... hard paper will feed properly...

  That is all... should not have to do, BUT it's best that packing this f * er on the rise and water and the ascent to Costco...

  have a nice day

• HP Officejet Pro 8600 Plus do not print hardcover

  I tried the solutions posted: 1) made sure the tray 2 is not installed. (2) printed 100 white pages of plain paper. (3) modified preference hardcover and paper media.  However, I always get out of paper message when you try to print on thick paper.

  This is a new printer. Help!

  Hi hubox,

  Welcome to the HP Forums!

  I understand that your HP Officejet pro 8600 more do not print card stock, and I'm happy to help with this problem!

  To get help, I'll need to know:

  • If you use Windows or operating system Mac and the version number. To find the exact version, visit this link. Whatsmyos.
  • If the printer is connected, USB, Ethernet, or wireless.
  • If the printer is capable of making copies of itself.
  • If the power cable plugged into a surge protector, or directly on a wall plug. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.
  • The size of the stock card.
  • The weight of the cardboard.

  In the meantime, please take a look through this paper guide. ' A ' Out of paper ' or 'Choose the motor at a standstill' message and the printer not picking up or feeding of the paper in the main tray.

  I hope to hear from you and thank you for posting!

• My new HP Officejet Pro 8600 N911a does not allow a webscan

  My new HP Officejet Pro 8600 N911a does not allow a webscan on my laptop Dell Win7, which indicates on its Web page ¨that that the corresponding software is not installed".  I already tried in vain to install all software from the included cd, but did not find the corresponding software.  I was surprised to see that this cd does not start by itself, the single executable that I found was a setupxxx.exe and that did not include the scanning options.

  Anyone has a suggestion to solve this?

  Hello tutoke

  The Webscan must be selected in the tab of the administrator of the Embeded Web Server (EWS). See the screenshot below.

  1. Click settings
  2. Click the administrator settings
  3. Check Webscan
  4. Press on apply downstairs.

  Try to scan the image.

  

• OfficeJet Pro 8600 Premium e-All-in-One - N911n photo paper is not a choice of paper to Tray 1

  For the HP Officejet Pro 8600 Premium e-all-in-one - N911n

  I am running Windows 7 64 bit

  No error message

  New configuration of the printer

  I don't see as a choice of paper photo paper in Tray 1

  Hi FrancoArdito,

  Follow the steps below to print photo Tray 1

  1. Insert the photo paper 4 x 6, 5 x 7 or 8 x 10 Tray 1

  2 open the print application printer preferences

  3. click on the paper/quality tab

  4. Select the paper size, media Type and paper source

  5. click OK to save the settings, and print the application program.

  

• Printer HP Officejet Pro 8600 Plus: notice I have paper

  The paper is in their but he does not notice.

  Hi @Printer666,

  Welcome to the Forums of HP Support! I see your HP Officejet 8600 more does not recognize the paper in the tray. Do you get any error messages? I see you are using Windows 10, did this happen after having upgraded to Win 10, or was it a problem before?

  "I would like to you to start troubleshooting here: a ' paper ' or 'Stalled engine Pick' displays

  What are the results?

  I'll watch for your reply.

  Thank you

• HP Officejet Pro 8500 will not send or receive faxes

  HP Officejet Pro 8500 will not send or receive faxes. 'Run Test Fax' indicates that everything passes.

  Then see HP support pages for your model, its their equipment & the fax is independent of the victory