HP C309a printer range - try to connect wireless

Similar Questions

• HP b209a printer range will not connect to router comcast using the WPS button

  HP b209a printer range will not connect to router comcast using the WPS button. I try to use a new Comcast router (technicolor TC8305C). When I try to connect the printer times out and says that no connections are when I check for wireless connections. Yet, when I print the network configuration page, the SSID for the new router is at the top of the list. I reinstalled the software by the support of Comcast, but it did not help.  I'm ideas please help!

  Thank you

  Never use WPS to connect.  If done it should be disabled in the router for security reasons.  Connect manually via the SSID and password following the instructions in the manual.

• Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation. I had to plug it, but the printer does not respond now.

  Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation.  I had to plug it, but the printer does not respond now.

  Is what brand and model of printer?

  I do not work unless your new router has the same SSID and password wireless as the old. Consult your printer documentation to find out how to handle the situation. For example, some Lexmark wireless printers have a program called Configuration Utility Wireless in the Lexmark folder under all programs on the start menu that is used to set up the printer when changes are made to the wireless network.

• try to print from my laptop connected wireless

  When I test printing from Firefox on my laptop Firefox crashes if I goto Internet explorer, I am able to print what I am doing wrong

  We are sorry to hear that Firefox crashes. To better help you, please follow the steps below to provide us with the ID's crash to help us learn more about your accident.

  1. Entered on: crashes in the location bar (this is where you enter the URL of your Web site) and press ENTER. You should now see a list of submitted incident reports.
  2. Copy the 5 most recent accident ID that you see in the accident report window and paste them in your response here.

  Thank you very much for your help!

  More information and additional troubleshooting steps are in the article Firefox plant - troubleshoot and prevent assistance fixing crashes .

• HP deskjetF4580 printer range has limited connectivity and uses IP 169 instead of 192

  My wireless printer has suddenly displayed the error message saying ' printer has limited connectivity. Sound by using the property intellectual 169... that is not compatible with 192... Sytems contact administrator '. (that's me and I don't have a clue!)

  I've uninstalled and reinstalled the driver of priinter, but yet, it gives the same message and will not be printed. It will print with the cable, but I want to print wireless.

  Any suggestions gratefully received!

  This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Your question belongs here: http://answers.microsoft.com/en-us/windows/forum/networking

  The presence of the "169" address indicates that your printer is not able to get an IP address from your DHCP server.  Check the network settings in the printer.

• Windows 7, and homegroup to print from my laptop connected wireless...

  I have 3 desktop computers running Windows 7, all networking, all in a homegroup with a HP all-in-One printer attached to one of the desktop computers. I also have a Toshiba laptop, also Windows 7 computer in wireless network and as part of the homegroup. When I print from the laptop, sometimes it will print and other times, it will send the print job but it's like the printjob enters the twilight zone and nothing happens. Confused on how to solve this problem, any suggestions?

  Hello

  1. What is the number of the HP printer model?

  2 are you able to print correctly on other computers?

  3. who is the antivirus installed on the laptop program? Is there a firewall integrated with the antivirus?

  4. is this problem limited to any specific application such as Internet Explorer, Microsoft Word etc.?

  It seems that the firewall program is blocking the printer. I suggest you perform the steps.

  Method 1:

  Step 1: if you have McAfee or Norton installed on the computer, you can change the default firewall settings and check.

  Step 2: Disable the anti-virus software if installed some and check.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. open Administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on print spooler service and then click Properties.
  d. under the tab general , next to Startup type, make sure that Automatic is selected.
  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  See also:

  Why can I not print

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Hope this information helps. Response with status so that we can help you.

• Whenever I try to connect wirelessly it disconnects immediately. He then referred to a box of troubleshooting.

  I did not understand a way to solve this problem... I'm wired and connected at the moment but I have not found how to fix wireless. This is the problem
  I have not downloaded anything new or no recent data... but it seems that my computer sees this network and I click to connect to him and he immediately says cannot connect to (the network) and then shows me the box of troubleshooting... is there a way to fix this?
  original title: Wireless problems

  Hello

  1 did you receive an error message?

  I suggest you to follow the methods and check.

  Method 01:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=tab04

  Method 02:

  I also suggest you to follow the link and check.

  http://support.Microsoft.com/kb/928152

• HP b110 printer range, try to print I got the following message: "failure ink system - error 0xc19a0003.

  I bought a HP b110 printer 1 year and there are 8 days, so is no longer under warranty. Yesterday, when trying to print, I got the following message: "failure ink system - error 0xc19a0003. I have renewed all the ink cartridges (I only use original HP) to nothing does not...

  Any ideas would be appreciated.

  Thank you.

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Connected wireless, printer but not scan

  Well I just bought the 120 want wireless printer. It is connected wireless to my Mac. It allows to print but when I try to scan it does not find my computer. I entered the printer utility and selected scanning to computer, but keep the error message it is not communicating with the printer. (Of course, it's because I can print wireless). Is there a solution to this problem. My wife is running windows and it works perfectly for her through the wireless.

  I spoke to a representative from HP who went on the site of Apple and downloaded the latest version of the MAC compatible print driver. It took to connect with 4 different representatives of HP to solve the problem. I understand the difficulty, however, I think that technicians need to get on the same page. How one Tech may know exactly what to do, then the 3 others sent me in a different direction? The problem has been resolved so thanks to HP staff.

• Linksys wireless-G 2.4 GHz DELL Studio XPS laptop. Can do not seem to connect wirelessly.

  Linksys wireless-G 2.4 GHz DELL Studio XPS laptop can do not seem to connect.  has worked before.  Works with a lead wire.  Clues to operate wireless?

  Thank you.

  Hi R4M4,

  1. did you of recent changes on the computer?

  2. what happens when you try to connect wirelessly?

  3. What is the model number of the Linksys router?

  Check and make sure that all the wireless connection settings is correct on the computer.

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• My router is not connecting wireless more... Please help!

  My internet connection is out, and when it was restored, my router would not connect to internet at all.  I tried to reconfigure the router with the installation cd provided and now the router connects via an ethernet cable, however when I totally the ethernet connection cord is lost and when I try to connect wirelessly, I get the message "Windows cannot connect to this network."  Help, please!  I have a laptop HP Windows Vista 64 - bit, an RCA cable modem, and router model is WRT54G2.

  As you have pushed the button of the router config settings SSID and the security must have changed on the router... Then open the page of the router again and redo the wireless (SSID and security) on the router settings.

  Once you have done with the settings, on the computer... remove the preferred network and manually add the network.

  Click Start > Control Panel > Network and Sharing Center > manage wireless networks, here to remove all present systems and close all the window... Click Start > Control Panel > Network and Sharing Center > manage wireless network and click Add, select manually create a network profile and click Next, enter the name of your network SSID/network, select WEP for security type and enter your 10-digit network key and click Next, it should say 'Connected successfully to _' close all windows and see if you can connect to the Internet wireless...

• Unable to connect wireless even though we have the right key wireless.

  Wireless

  We have an acer one happy and we can connect to the internet by cable, but although we have to correct wireless code, we can not connect to wireless. Our other laptop works fine with the same code. Please can you help me?

  Hello

  1 did you change on your computer before this problem?

  2. you receive an error message?

  3. what exactly happens when you try to connect wirelessly?

  Follow the suggestions and check if that helps.

  Method 1

  You can update the latest wireless adapters.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  You can follow the procedure under article

  Problems in Windows http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows?T1=tab04 see also wireless and wired network connection: solve problems, find http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-finding-wireless-networks wireless networks

• I try to connect my Acer Vista laptop for HP Officejet 7310 printer using a wireless connection.

  I try to connect my Acer Vista laptop for HP Officejet 7310 printer using a wireless connection.  The printer is connected to a Dell XPS running Windows 7.  Is there a way to do this?

  Hello

  Printers use a built-in wireless card and plug it into a power source, not your network or computer. After turning on the printer, you must refer to the documentation that came with the printer to set up a wireless connection for each computer.

  I suggest you to download and install drivers from the link below

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=391182

  Please use the links below.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

• Printer offline depending on laptop when connected wireless

  Hi I have a wireless c309a printer connected to my laptop via a netgear router. My children, off the printer and now it is back on the laptop says that it is offline. I reported a test of the wireless network that says that everything is fine and it is connected. When I put the IP address in the web browser, it tells me that the printer is connected and everything works. So what's happening? Why not print?

  Yes, if the IP address of the printer changes all the time your computer may have a difficult time finding.

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you don't know it, enter the current IP address.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the gateway and DNS white. Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• HP Envy 5640: my new printer is connected wireless but not detected by the computer

  I installed a new printer, but when you try to print, it records in PDF format instead of print. The wireless connection is good and shows the printer as the default printer.  How can I change the settings of the recording to printing?

  You are welcome.

  To enable connected HP support options, click the devices tab.  Touch the icon and enable webservices. If you have already activated webservices, touch "Print information Page."  Claimcode of the printer to add the connected HP printer. Or, if you want, call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I'm sure that the printer you see so-called 'Network' would be wireless. Make the default and try a test print.  If this fails, try the other being default and do another test.  Once remove you the one that is active, right-click on the printer late heading and delete it.  Worst case if that happens again call short number above.

  Have a great weekend,