HP cm6040MFP Jamming

Have you noticed with 6040 MFP HP cm machines they hate labels. I tried their execution of all trays paper 5. I replaced all the important driving rollers. Such as: Fuser OEm, Pick up and rolls, secondary power transfer unit.

The sheet of labels always stops just to the sensor on the transfer belt (yes I tried to clean this area). This before the merger.

The labels that we print are Avery. We have only run the sheet once. the same labels will cross our HP cp2025 no problem.

Yes, we tried both saying the machine that the set has labels and leave just the form of plain paper. no difference. Any ideas.

The firmware is the latest.

forgot to mention the machine never blocks just labels on plain paper or heavy glossy paper.

OK finally worked through the problem with HP ($49.00 well spen) t. If your face this problem, it's because your printer does not recognize the thickness of paper ness. Here is the solution that I have tried and sent it to my client to circumvent.

The problem is on some labels to the printer sensors think labels are another type of paper, due to the thickness. HP solution; is 'Head' to the printer instead of plain or labels. I tested on Avery 5160 labels that you gave me and they work fine when you follow the steps below.

I'll give you instructions step by step so that you have success. Also I you have to print private using the manual feed tray 1 (this is the drop down tray on the right side). The machine is too busy for you to try to drag labels in tray 2,3,4,5 and will likely create a jam.

Etape1) step 1) under 'File' in the document, select 'print '.

Step 2) pop - up print screen, choose "Properties".

Step 3) click on the tab "paper / quality".

Step 4) under 'source' from the menu drop down select "manual feed in Tray 1". Or you can select "Tray1" so say to what you wanted to print 10 sheets still thing labels at once.

Step 5) under "type" choose "header."

Now private photography way to do not to hold machine until you resume the labels to it.

Step 6) click on the tab "job Storage."

Step 7) click 'Private Job' under 'job Storage Mode.

Step 8) 'require pine' comprise all easy to remember 4 digits. "1111" is always good to use.

Step 9) "under the user name' use your own name. Unless your name is very common and that he could get confused.

Step 10) "Job name" If your shipment just a job let go automatic, but if your impression up to 10 different jobs at the same time, then each give a unique name so that you know what type of labels to put in Tray 1 and when.

Step 11) click on 'ok' and click on 'print '.

A work of Identification Storge is displayed click on 'ok', it's not really important that the machine is now store your business.

Now you can gather up your labels, go to a meeting or take a call that no matter when you go because your job is stored on the hard disk of the printer and will not interfere with all other peoples print job, copy jobs or analytical work.

Step 12) to the printer with your labels.

Step 13) If no one is the copy or scan you can go ahead and access the document. Since the Panel scroll down until see you "Storage of the work" click it.

Step 14) and select the folder that contains your name for example "Pramila.

Step 15) and then select the name of your 'work' and press the 'pin' button that opens enter your PIN NUMBER '1111 '.

Step 16) If you want to print several sheets with exactly the same thing now, you can enter any number 1,2,3,. If it's just a copy, press the 'Start '. For multiples to 'step 4', it would be a good idea to just select "Tray1" and not "power manual Tray 1".» This avoids having to press the "Start" button to feed each sheet of labels.

Step 17) the machine invites you to load "manual Tray 1" and once loaded, the printer automatically prints your work. Your work is now cleared from the hard drive and disappeared forever.

It seems like a lot of steps, but it isn't really. 50% of the steps your probably already done when your simply send a job. I have just clearly detailed to them. The process takes me about 20 seconds from start to pick up my printed label.

northerntech wrote:

Have you noticed with 6040 MFP HP cm machines they hate labels. I tried their execution of all trays paper 5. I replaced all the important driving rollers. Such as: Fuser OEm, Pick up and rolls, secondary power transfer unit.

The sheet of labels always stops just to the sensor on the transfer belt (yes I tried to clean this area). This before the merger.

The labels that we print are Avery. We have only run the sheet once. the same labels will cross our HP cp2025 no problem.

Yes, we tried both saying the machine that the set has labels and leave just the form of plain paper. no difference. Any ideas.

The firmware is the latest.

forgot to mention the machine never blocks just labels on plain paper or heavy glossy paper.

Tags: HP Printers

Similar Questions

  • HP Laserjet CM6040MFP always paper jam on the fuser unit when full photo in plain paper printing

    Hello

    My office using printer HP Laserjet CM6040MFP, but I have the problem.

    The printer paper always jams on the fuser unit when full photo in plain paper printing. I didn't know why, but this problem occurs on another printer of the same type.

    Please help me

    -Product name: HP Laserjet CM6040MFP Q3938A

    -Operating system: Windows 7 64-bit

    Kind regards

    Milannerz

    Hello again-

    I am pleased to learn that the passage is a practical solution for you.

    The other possible solution which seemed to be a finding a setting under print quality-> Optimize-> light Media and put on IT.

    I don't have a CM6040MFP to check this setting, but it's just an alternative to consider.

    Personally I have found that a high coverage near the leading edge of the media, some printers can sometimes cause an increased rate of jam.  So I think that your shift is a viable solution.

    Good luck!

  • I received an error message on my iPad: the application has lost the device context when I try to open the Jam Cookie

    If someone got the error message: "the application has lost the device context? This appeared on my iPad on the application of jam cookie there is a thin red strip across a black screen with the error message locked in the red band. Help!

    Reset the iPad.  Press and hold the power and home together for 10 seconds until the Apple logo appears.

  • printer says there is a paper jam, verified and there is no will not be PRINTED

    taken apart and no printer could not find a paper jam. Restarted the computer and the printer, has not corrected the problem.

    Hi nann, I do not see how this could be related to firefox - please consult the manufacturer of your printer support resources instead. Thank you!

  • can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

    can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

    Are you sure that you do not have to register on this site through the usual way and what you should be used elsewhere on the site?

    Have you tried to contact them to help this topic or to check if they have a FAQ on this subject?

    I found this in another thread that you created [*]:

    I'm not sure do I bought a home income internet james ashley program and I copied the login info I was given and the password does not fit into the window of password and I forgot the link password does not work I sent emails, but do not receive an answer im don't know what to do is anyway you can help me to recover my info or help me change the password?

    I assume that you have downloaded and installed this program and need to use this password in this program or only you can use these data to download the program from the site james ashley?

  • HP Officejet 7612: Papper jam error

    Hello.

    I have a problem with my HP 7612.

    Whenever I want to print or copy printer me gives error paper jam so that there is no paper jam.

    When I press Ok paper come out well and perfect, then after a few seconds printer begins to print OK.

    This happens every time.

    Please help me to solve this problem quickly, it makes me carzy! My work is this printer!

    Thank you

    I found it! Just clean the encoder bar!

  • HPofficejet5600v all in a single pr: printer on photo paper jams - every time

    on photo paper jams

    Welcome to the HP Forums @calopeanuts

    I came across your post about the question of jam you feel, and I wanted to respond to help with my suggestions. Please see the guides below to resolve this issue. If the problem persists after troubleshooting, please try to call the hotline to discuss replacing the printer or the rating of. I will include HP contact info below to reach them directly.

    One "original jam: clear jam and press OK"message for HP Officejet and Photosmart all-in-One Series Printer.

    A "Paper jam" error on the HP Officejet 5600 all-in-one printer series

    Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

    Contact HP:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number appear

  • B210 in paper jam printer there is no paper stuck in the printer, but the screen shows paper jam

    Paper jammed paper but screen says paper jam jam preformed the resolution of problems and no resilt

    Hello

    Have you tried the steps outlined in this article. Give them a shot and tell us if it helps.

    Good luck!

  • OfficeJet Pro 8620e ADF jam error after firmware update

    After you install the updated firmware from the touch screen of the printer, the printer restarts and now has an error that says "Original is caught in the ADF (ADF).  Open the cover of the ADF, remove and reload the original, then try again. »

    I went through all the steps to clear a jam from the ADF, but the opinion is persistent.  It is not (and was not before the upgrade) in the ADF at all.  Since this coincided with the update of the firmware, my suspiscion is that the firmware has not installed properly or something.  What am I doing here?

    This problem has been resolved using the printer instead of purchase and exchange for another.  I can hardly believe that the cables are working loose within two weeks, she was detained and then broke at the exact time that the firmware update has been completed.  In any case, the problem was solved by replacing the printer.  I don't have any feedback solutions until a month after I did.

  • Jam - HP Officejet 8500 pro error - please help, deployed without return option

    Jam - HP Officejet 8500 pro error - please help, not deployed to M.E. no return w/lovely HP option

    I have a month old HP Officejet 8500 Pro, which suddenly give a paperjam error message.  There is no paper jam.  I spoke with HP Technical Support making long resets even blow the bowels to air without result.  It must be a simple mistake.  I saw it reported on other boards, but it seems that everyone is simply trading on their printers.  Not an option, like HP, in their infinite wisdom will not replace a defective unit overseas.

    I thought that there is a paper feed guide that hung above the paper tray.  It's hangin' is low... but maybe I was mistaken. If I tilt the printer back it will feed and eject a page, but not print.

    If someone at HP would be so likely to enlighten me I would willingly do what is necessary to take part, or whatever...

    Help... Help... Help...  Thank you...

    Here is a link that will help you.
    http://goo.GL/vxhuH

    It may be a sensor that went bad in the printer that generated the message.

  • I can't download my Garage Band Jam Pack CD on my Mac Pro bassist

    I can't download World Music Jam Pack CD on my Mack Pro Tour...?

    Some of the metaoutil code PowerPC and installers are not running on an Intel Mac with a new version of Mac OS X without environmental Roseta.

    See this page in the bullets & os FAQ, how to install manually: http://www.bulletsandbones.com/GB/FAQPages/InstallJamPack10.7.html

  • Error jam paper on HP PSC 1350v

    I had a paper jam. Authorized by the front of the printer. I took on the back without any paper in the printer. I cleaned the rollers. I watched the videos and disconnected and reconnected and quite. The flashing "E" for error on the printer has disappeared, but when I try to print it does not print the printer says "paper jam" online icon   Help!

    Hi, welcome to the forums!

    I'm sorry to hear that you had a jam, authorized and clean the rollers and the printer still won't print. My best suggestions you are watching inside the printer when the carriage moves and look for any paper, sometimes you have to push up against the left or right side inside the printer.

    Also, try to reset the printer: Plug the printer directly into the wall, avoiding bars and surge arresters. This ensures that the printer is full on and can help in this situation.

    If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

    Best wishes

  • HP Officejet 7310xi all in one: printer keeps repeating transport jam

    My printer do not print and indicates a carriage jam and told me to open the door and a cart clear jam but there is nothing there, and there is no paper jam. I tried to unplug the machine, its restart, restrting my MAC and the message still flashes. Does anyone have any suggestions. I know this is an old printer, but I love it and want to keep it going. Thanks in advance for any ideas.

    Hello

    Please visit the link below to fix the problem

    http://support.HP.com/us-en/product/HP-OfficeJet-7300-all-in-one-printer-series/391181/model/391190/document/c00304007/

  • OfficeJet Pro 6230: Officejet Pro 6230 continous (not of paper) paper jam error

    As soon as the printer powers on it the ink carrier Wizz backward real quick (as he struggles to move) and then gives me a paper jam error (the resume light flashes and error appears on my screen). He did the same thing when I try to print anything (including the status report page).

    When I up the access panel upward (power on), the carrier of ink isn't even move to ink cartridges which can be changed. I try to move with force, but it does not move (if I use more strength, somethings will break). Ink is a bit new, so I don't know it still has ink in there.

    The steps I've tried:

    plugged the power supply into the wall outlet

    roller cleaning

    THERE IS NO PAPER or PAPER PIECES BETWEEN ROLLERS (I checked like 20 times)

    reset the printer

    There is a large black gear coupled to a white average speed on the left side near the bottom of the printer. I manually drove the speed by pressing (rotation) of North (or forward or to the rear of the printer) for a few seconds and once I did that. the ink carrier was able to move as it's supposed to, and I could see the ink. but once the power is back on, the carrier of ink was in the locked position and fights again and gives me the paper jam error.

    I don't have really any troubleshooting documents on the CV online on how to fix a jammed media of ink and clearing paper jams, so I'm out of options.

    It is plugged into USB

    The main problem is the paper jam error.

    I don't know if the stuck carrier of ink is the cause.

    Hi @Comp-Tech.

    Thank you for joining the HP Forums!

    I noticed your post that your printer HP Officejet pro 6230 receives a constant paper jam error. I'm happy to help you!

    Since you did all the steps already to troubleshooting in this guide, A 'transport Jam' Error Messageand this guide, "Problem of tray or paper jam" Error Message appears, as well as the reset of the printer. The next step is to fix the printer / or replaced.

    Please Contact HP phone support for assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

    If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

    Best regards!

  • 'transport jam' paperless in the officejet pro 8500 printer

    I received a fax and then "clean printhead" appeared... 15 minutes later... always cleaning... I shut it off with the power button... waited 2 minutes and then turned back on it... "jam carriage error", I check the whole printer inside out and backwards on the side... I turned it off again... unplugged it... and rekindled it... then I saw "replace ink cartridge"... the cyan and black... I took the cartridges off... put them back in and then looked at the ink level... There are still many at a time... then I get the "jam carriage error" once again... and nothing that I may change this in the window... If I click OK in the window... it says "Printing cancelled... then back to 'jam carriage error'... I think» also the transport of ink is pasted on the right side... He tried to pass it... and cannot without ripping it out of the printer... when I opened the box in the back... it was ink on the right side...

    It is 3-4 years, because I had it... and put some miles on it... I do PITCH it... just bought the 8600... still in the box... or is there hope... and of course, I just bought and put new cartridges color... lol... Thank you...

    I count on the printer immediately.  It may be just a deep reset to clear the problem.  Run through this document.  If it doesn't help you to solve the problem, then go ahead and get rid of the printer.  Let me know what happens.

Maybe you are looking for