HP Color LaserJet 2605n main circuit

Similar Questions

• HP Color LaserJet MFP M177 Pro: Problems of analysis between iMac and HP Color LaserJet Pro M177fw MFP

  Hello

  I had no wifi problems between my Imac and HP Color LaserJet M177fw MFP Pro to scan until recently - it can be related to operating system update to OSX 10.11.4 which was done yesterday however.

  I can scan is no longer docyuments from the top of the charger page - scan starts but just hangs and then I can not re - activate the scan function until I have to force it to quit.

  Can you suggest appropriate corrective measures to try please?

  Thank you very much.

  Hello

  Make sure you have the latest drivers installed:

  In the Apple menu, click about this Mac, and then software update.

  Click on the main menu store reload the Page, and then select allow for the update check completed and install any publicly traded Apple / HP update.

  Then install problems with the products HP LaserJet on OS X El Capitan of scanning HP Software Update to address documents (ADF) automatic feeder:

  http://FTP.HP.com/pub/softlib/software12/OSX/HP_Easy_Start/Essentials/S/HP-printer-Essentials-S-4_5_0.pkg

  Kind regards

  Shlomi

• Color laserjet 4500 stripes CMYK

  Hello, last week, I have an old printer to my friend HP color laserjet 4500 (older printer...).
  He works "very well", but on each page, there are two bands CMYK. There is always in a different position on the page, but at the same distance from the other band. I ve already many printed pages, and these bands are always distinct as the first impression... Configuration pages (where you can see those stripes) and a close-up (page 3) is attached. Is there anyone who knows what could be the problem? Thank you!

  It sounds like a problem with the main drum, unit is 6 inches in diameter and thus you can get 2 copies of the default on a page, the colors are separated as the unit performs a full rotation between each color due to the gear and the displacement of carousel, so that you get each color in turn one after the other.

  As it is the width of the image, it may be the cleaning squeegee or similar within the drum unit, it might be useful checkign the lift remaining where it is close to replacement anyway.

  Each cartridge replacement will not solve this problem, as the belt is not a cause that on this model, the color of the scene are stacked exactly on top of the other, the image is formed on the surface of the belt, the element that takes the ink in the cartridges, and transfers it to the belt is the drum unit and it will expose this issue if defective.

  You should be able to confirm able from the beginning of one single fault at the beginning of another, this should be 6 inches (152 mm) - you should see also the spacing between each color of 6 mm the image below shows a typical default if the drum has a brand, the image will show spacing of 6 mm between the colors, the spacing between the beginning of the black point and the beginning of the next black dot will be 6 inches.

  

• HP CL stream M880 MFP: HP Color LaserJet Enterprise flow MFP ME output tray

  We have a HP Color LaserJet Enterprise flow MFP M880 with finishing tray.

  With the finishing tray attached it only allows the output to the upper and lower trays on the Finisher and removes the exit option on the top shelf on the main part of the unit.

  Is there a way to get around this?

  We would like to have the option for all 3.

  In fact just the finisher installed a few days ago and after he's looking for there is no way to use the bar to original condition with the attached finisher.
  
  You remove the tray of origin during the installation of the Finisher and install the transfer unit in its place.
  
  Paper is then powered off the machine and in the transfer unit when it is moved to the right in the finisher.
  
  If my post is solved your problem and click the accepted as button solution under him.
  
  In order to thank a Tech for a post click the thumbs up button under the post.
  
  You can even click on the two keys...

• Solved! Driver solution Windows 7 for HP Color LaserJet 3550

  I did get the printer HP Color LaserJet 3550n (3550 family) printer to be installed in Win7.  This printer is the only thing that do not start with Win7. In the printers and devices window, I tried troubleshooting, but it was a problem with the DOT4USB drivers. Similarly for the others, I managed with the following solution:

  (1) went to HP and downloaded the Vista 32-bit drivers for the 3550, the unpacking to C:\HP CLJ3550\, as suggested by the driver file.

  (2) devices printers & a

  (3) I chose the first 'device function' so .

  (4) I selected the second and third function (which were and and did the ...) for each.

  (5) I disconnected the USB to the printer, I went back to devices & Printers and selected .

  (6) I chose and installed the printer.

  (7) it wouldn't work unless I "let" Windows makes the default printer

  (8) after that it was over, I did on my favorite printer and selected, and everything worked.

  Thank you
  your advice really helped.

  assign a default value for the first floor help really.

  Only one extra thing is that on the main pc, you must install the driver for a new printer that should be default and a new share name.

  Then on another pc with 64-bit windows find the printer and install the 64-bit driver seperatelly.

  in this case, everything is perfect.

• HP color laserjet cp4525: lack of color

  I have a hp color laserjet cp4525 in my office, but the problem that I encounter for the last two months is when I print in color it does not give me the quality of the color. is there a seting to regain the original color of my hp color laserjet cp4525?

  The first thing you need to do is to print the print quality diagnostics pages and see if the problem is of a specific color.

  The main question I have is do you use genuine HP toner cartridges or toners to spare?

  You're printer calibrates its color automatically and except if you have changed the settings should be able to produce specific colors without any resets.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• HP Color LaserJet M177fw MFP Pro - support PostScript?

  Hello

  I am looking to buy a new printer/scanner/copier(/fax is a nice to have, but not mandatory), and I am deciding between the following models:

  HP LaserJet Pro 100 color MFP M175nw

  HP Color LaserJet M177fw MFP Pro

  PostScript support is important to me, and I know that the 175 has it.  However, I'm not sure I know the 177, even after digging through several web pages and documents.  Here's what I found:

  -The page of the main form for the 177 says that he accepts "Cffp.  I'm not familiar with this variant PCL, so I don't know how it compares to PCL5 or PCL6, etc..  I have been unable to find more information about "Cffp.

  -The 'Software' section of Page 2 of the PDF Datasheet for the 177 mentions the driver "HP PostScript".  This is the only place where I saw no potential indication that the 177 supports PostScript.  This article also mentions a driver "PCLmS".  I couldn't find more information about "PCLmS".

  -The user 's Guide the 177 refers only to PostScript in an article that refers to ePrint.  However, it does not imply that the 177 itself supports PostScript.

  -Page product specification (in the Support section of the HP site) for the 177 has a "Print Specifications" section which lists only "PCL3 GUI" next to "languages of device.

  I'm guessing that the 177 is not compatible PostScript, but someone has the more definitive information?  Also, is there a description of the Cffp / PCLmS somewhere?

  Thank you!

  Hi Clent

  Here is some information on both printers.

  Here's a url for the printer for Color LaserJet MFP M177fw Pro specifications

  http://support.HP.com/us-en/document/c03901180

  Data sheet also.

  http://www.shopping.HP.com/shopping/PDF/cz165a.PDF

  Fonts and fonts depends on fonts and fonts in OS.

  Print language

• Don't Color LaserJet no power

  Hello

  I have a Color LaserJet CP1525NW and it has no power.  I tried 2 different power cords and nothing... then plug cords of a monitor and they work, so it doesn't seem to be the cord.  I turned the power switch on and off several times, but still nothing.  Does not make a noise.  I don't feel nothing burned and nothing notable prior to this problem.  Any ideas?  Is there a breaker or a way to reset the device?

  Thank you... Jim

  Hey Jim,.

  I see you have a related issue with your Laserjet CP1525nw power.  Looks like you did a large part of the troubleshooting for the device and that the question is internally in the supply circuit of the printer.  Here is the document troubleshooting for the device when a question of power is present.

  The printer will not turn on or respond

  If the steps do not address the issue, so do you know if this printer is still covered by the manufacturer's warranty?

  To check the warranty: http://www.hp.com/go/warrantycheck

  If you need to contact HP Technical Support please use the following link:

  Contact HP worldwide | HP

  Hope this helps,

  Jason

• HP Color Laserjet: HP Color LaserJet - lines/stripes

  Hello

  I have a HP color LaserJet and I get a lot of lines and streaks on my printed pages.

  I also note toner inside the printer and my printer seems to take cleaning cycles more than before.

  Thank you!

  Although I work for HP, my posts are MY opinion and not those of HP.

  I would recommend some of the things

  First of all, make sure that your firmware is up-to-date, go to the page software and drivers on HP.com download and install the latest firmware available for the printer.

  Then, make sure that the toner collection unit is not complete

  Finally, print a cleaning of the control panel of the printer page, normally, you should select the following text in the menu:

  • Maintenance of the unit
  • Calibration / cleaning
  • Cleaning page

  You can also view this document as well.

  HP Color LaserJet Enterprise M552, M553 and MFP M577 - lines/stripes, toner and cleaning cycles dust excessive

  Hope that helps.

• Color LaserJet M277dw MFP: Cartridge not recognized after HP recently updated.

  I can use WIndows 10 if the fix is available for this OS.

  I recently updated my HP LaserJet, and after the update, he refused to print, scan or copy. The error message on the display says: "Cartridge not recognized" and it has a large image of the yellow and black cartridge, cyan and magenta those smaller, but below. The printer has a wireless connection to internet.

  Any help would be greatly appreciated.

  Thank you

  Hello

  Install the following firmware for your printer, and then look for a difference:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/swItemId/kJ-149905-2

  Kind regards

  Shlomi

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex

• Color Laserjet 2550 L and XP SP3

  Hello

  I installed XP SP3, last week and since I was not able to print from my color laserjet 2550 L printer. I tried the windows troubleshooting printing suggestions for the use of different drivers, but no luck. Any body out there got any advice, it's a pain not being able to print.

  Thank you very much

  If there is no Purifier not listed on the Web site nothing listed in your programs menu or add remove software window, then all you have is a base driver installation.  Following the steps listed for remove driver and the entrance to the server properties should be sufficient.  Manual uninstallation is for printers that have utility programs or use Software Solutions of Support or Director.  Even still, following the instructions provided here should at least bring basic functionality.

• LaserJet pro 177: bought used hp color laserjet pro mfp m177

  Installation disk arived broken. How can I do to replace it.

  Just upload what you want the site web theHP.

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

• HP Color LaserJet 4550: HP Color LaserJet 4550 PCL XL error

  I use this printer for years.  It works beautifully.

  Windows 10 has just done an update & the printer driver disappeared.  I use this printer with a HP Jet Direct J4135A usb card.  Now any driver or what I do I try to install or use, I get the same error message.

  I am trying to use the printer driver's upd-pcl6 - x 64 - 6.3.0.21178.exe.  The printer driver appears in the settings & is by default we & they say that everything works correctly.

  Can you help me please?  I don't want to go out and buy another printer.

  PCL XL error

  Subsystem: KERNEL

  Error: UnsupportedProtocol

  Operator: 0x0

  Position: 0

  Found the solution for everyone that might have this problem.

  Just right click on the printer icon in the Device Manager and select printer properties / Advanced / change & driver driver HP Color LaserJet 4550 PCL6 ranking to HP Color LaserJet 4550 PCL6 and click OK.  That's all there is to it.

  Now, it will work with USB (HP Jet Direct J4135A Card) that is not supported, instead of just supported network.

• HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP

  Hello

  I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.

  When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).

  My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.

  Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?

  the same connection problem, of course, it happens when I do touch printer and console web administration, of course.

  In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices

  I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.

  My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.

  Thanks in advance for your help,

  Lorenzo

  Hi Lorenzo,.

  To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)

  You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.

  Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:

  http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html

  If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

  Kind regards

  Shlomi