HP Color LaserJet M177fw MFP Scanner Error 22 Pro

Similar Questions

• HP Color LaserJet M177fw MFP Pro - support PostScript?

  Hello

  I am looking to buy a new printer/scanner/copier(/fax is a nice to have, but not mandatory), and I am deciding between the following models:

  HP LaserJet Pro 100 color MFP M175nw

  HP Color LaserJet M177fw MFP Pro

  PostScript support is important to me, and I know that the 175 has it.  However, I'm not sure I know the 177, even after digging through several web pages and documents.  Here's what I found:

  -The page of the main form for the 177 says that he accepts "Cffp.  I'm not familiar with this variant PCL, so I don't know how it compares to PCL5 or PCL6, etc..  I have been unable to find more information about "Cffp.

  -The 'Software' section of Page 2 of the PDF Datasheet for the 177 mentions the driver "HP PostScript".  This is the only place where I saw no potential indication that the 177 supports PostScript.  This article also mentions a driver "PCLmS".  I couldn't find more information about "PCLmS".

  -The user 's Guide the 177 refers only to PostScript in an article that refers to ePrint.  However, it does not imply that the 177 itself supports PostScript.

  -Page product specification (in the Support section of the HP site) for the 177 has a "Print Specifications" section which lists only "PCL3 GUI" next to "languages of device.

  I'm guessing that the 177 is not compatible PostScript, but someone has the more definitive information?  Also, is there a description of the Cffp / PCLmS somewhere?

  Thank you!

  Hi Clent

  Here is some information on both printers.

  Here's a url for the printer for Color LaserJet MFP M177fw Pro specifications

  http://support.HP.com/us-en/document/c03901180

  Data sheet also.

  http://www.shopping.HP.com/shopping/PDF/cz165a.PDF

  Fonts and fonts depends on fonts and fonts in OS.

  Print language

• HP Color Laserjet M177FW MFP PRO cannot connect to web services

  I bought a HP Color Laserjet M177FW MFP PRO today and took me to the top. It can print and scan over wireless network. However, it cannot successfully connect to web services. I put the DNS numbers with google DNS addresses. I changed his IP address with manually. The IP address is unique. Normally it is not activate/remove webservices. But when I restart it, it can do for a few minutes. It may take an e-mail address, but it does not print any information sheet. When I try to print a sheet it says "Connection problem" in the first minutes, and later, he said "Connecting" and he expects, there is no error message. What am I supposed to do? Please help me.

  First of all thanks for your help. I solved my problem. After that I sent this message that I've updated my firmware printers and that does not solve the problem. I called HP customer service and they help me. We have solved the problem. My router was the reason for my problem. When I reset to factory settings, the problem disappeared. Thanks anyway. I want to share my solution. Maybe it helps others.

• HP Color LaserJet M476nw MFP: Scanner reported an error - HP Color LaserJet M476nw MFP

  I had problems with the HP scanning software.  When I run the software and try to initialize a scan, I get the message

  =====

  Scan reported an error

  HP Color LaserJet M476nw MFP is currently unavailable. Please check if it is connected and turned on, or try again later.

  =====

  In fact, the scanner works fine, like I can scan documents directly to the USB port on the printer.  The scanner has worked in the past with the HP software on my computer, but now just won't work.  The printer is also properly connected to the computer as I have no problem with printing of documents.

  No idea how to fix this?

  Thank you!

  Hello

  Try to install the following package to make sure that your drivers are perfectly up-to-date:

  https://support.Apple.com/kb/DL907?locale=en_US

  Then restart your Mac and try to scan the image.

  If the same persisnts open the JSCA-Packard folder and move the HP scanning application to the trash.

  Then install the HP Easy Scan app instead (which is the latest version of HP scanning):

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Now try scanning using the application and check for the difference.

  Please let me know the results,

  Shlomi

• M177fw MFP Scanner Error 22

  I too have a color LaserJet Pro MFP M177 which gives the same "Scanner Error 22".

  Hello

  See the link below.

  http://support.HP.com/us-en/document/c03754266

• HP Color LaserJet M177fw MFP Pro - beeps periodically

  My M177fw took to beep once every 8 hours or more. I don't see anything in the newspapers, at least when you look at the internal web server to the device. He tries to point out an error?

  Thank you

  Allen

  Hi @DABJR ,

  I see by your post that the printer emits periodically. I would like to help you today.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Update the firmware of the printer. HP Color LaserJet Pro M177fw MFP drivers.

  Select your operating system, click Next, click the link for the firmware.

  You may need to set the time to sleep and define the sequence of events on the printer.

  Touch control panel:
  1. from the home screen on the product control panel, press the Setup button.
  2. open the following menus:
  The system configuration
  Energy settings
  Sleep/Auto Off after
  3. Select the time for the delay of sleep/Auto Off.
  NOTE: The default value is 15 Minutes.
  4. the product automatically wakes up when he receives jobs or when you touch the screen on the product
  Control Panel. You can change events make the product to wake up. Open the following menus:
  The system configuration
  Energy settings
  Alarm/Auto on events
  To disable a factor of reactivation, select the event, and then select the option.

  This information was given by the manual on page 59. Multifunction COLOR LASERJET PRO.

  If you need help, let me know.

  Have a great day!
  Thank you.

• Color Laserjet Pro M177fw MFP: HP Color Laserjet M177fw MFP Pro cool mood after printing all pages.

  I bought Color Laserjet MFP M177fw Pro for only 3 days. From the beginning he said impression... mood of cooldown and take a long paus. This issue takes place after printing each page. I use HP Toners. And my related directly to the wall socket (Electric).

  Please help me. It is urgent for me.

  Thanks in advance.

  Hi Ryans,

  Please check private Message

  I hope this helps you!

  +++ Say thank you by clicking on the star of congratulations in the post.

  Although I am an employee of HP, I speak for myself and not for HP.

• Color laserjet m177fw mfp pro: Color LaserJet MFP M177fw Pro will not copy

  177fw will not copy.  Prints well, but won't copy B & W or color, on the bed or in the charger.  Only "calibrate" for a second, then nothing.         Please advise, thank you.

  Welcome @crisplynoots,

• HP Color Laserjet M177fw MFP Pro cool mood after printing all pages.

  Hello!

  I have the same problem as these other guys. Could you send me the same solution as well?

  Hello

  Thanks for the forum invited, please check my private Message

  I hope this helps you!

  If my post has solved your problem, please mark it as "accepted solution".

  +++ Say thank you by clicking on the star of congratulations in the post.
  
  Although I am an employee of HP, I speak for myself and not for HP.

• HP Color LaserJet CM1015 MFP: LaserJet CM1015 scanner does not work in Windows 10 (64-bit)

  I up graded to Windows (64-bit) 10 now the scanner on my HP Color LaserJet CM1015 MFP does not. I installed HP Universal print drivers, but apparently there is no include scanner drivers. Anyone know where I can get the drivers scanner?

  Thank you

  N ° 7

  Hi Lou,

  Basic scanning drivers built into the operating system only allow scan however a USB key.

  You can follow these steps to install the previous HP software by using compatibility mode:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-c03506225

  Vista drivers can be obtained directly from the following link:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=1846081&swItemId=ly_51851_1&swEnvOid=2100

• Fatal error HP Color LaserJet CM2320 MFP 1406

  Please help I got this error during installation of HP Color LaserJet CM2320 MFP

  

  This error is due to Virus attack and was resolved by installing free s Malwarebyte

• HP Color Laserjet M476dw MFP: Of memory error on the HP Color Laserjet M476dw MFP printer

  Help please,

  I have a printer of HP Color laserjet M476dw MFP, its connected wireless to my computer mac laptop and it was working fine but suddenly today it appers error low memory which is strange, the file size is not more than 400 Ko, a simple solution to get red of this message pleassssssssssssssssss.

  I removed the printer and he added once again, the name of the printer seems to be good and show connected.

  Thank you.

  Shahid

  No, I did not change the toner, but I found the solution.

  This solution worked for me and my printer works now. You also try MAC OS.

  Remove the printer in printers and Scanners.
  Click on the button +, select the Protocol IP on top, type the address IPv4 of the printer, select Jet Direct below and then apply.

  Good luck

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n CONNECTED to THE NETWORK, SHOWS NO INTERNET CONNECTION

  HP Color LaserJet M277n MFP printer, is connected to the network and I am able to print and scan. During the attempt to get the HP Web Enable services in the Web services configuration page, it displays an error: "connection error, check the internet connection".

  After you enter the IP address of the printer in the browser, I am able to detect the printer. To enable printing of HP, but unable to do so finds out the above error. Tried a lot of things including re editing of. When I check the printer, it shows the proxy settings are required / incorrect, where, as confirmed by the supplier that they use the proxy server.

  Help, please.

  Hello @JljoThomas!

  Thanks for posting and welcome to the Forums of HP!

  I understand that you have a problem of activation of the functionality of web services on your MFP HP LaserJet Pro M277n. I'd love to help you with this.

  First of all, you have the printer connected directly to a wall outlet or is a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause. Issues when connected to an uninterruptible power supply/Strip/surge protector power
  In this document you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector
  ↑ This is not limited to the Laserjet printers.

  If this does not resolve the issue, we are going to let the router and unplug the power cable (NOTE: do not reset the router...), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  If you are still unable to connect to web services after trying these steps, we can try to set a manual DNS server of your printer to connect to.

  On the front panel of the printer, press the wireless icon. Select it wireless TO get the wireless summary. Do not your IP address.

  1. on your computer, open a Web browser and enter the IP address of the printer in the address bar. This will bring up the embedded Web server (EWS) page.

  2. at the top of the page, select Networking.

  3. in the left side, select Identification network.

  4. in article for DNS, under primary (IPv4) enter 8.8.8.8, under secondary (IPv4) enter 8.8.4.4.

  5. Select Apply at the bottom of the screen.

  6. try to activate the web services again.

  If it is still unable to connect, try to enter 209.244.0.3 for the primary (IPv4) and 209.244.0.4 for secondary (IPv4)

  Hope this helps!

  

• HP Color Laserjet M476nw MFP: My HP Color LaserJet M476nw MFP

  My HP Color Laserjet M476nw MFP made a crowing noise when printing envelopes.  Require lubrication?

  If you use non HP / recycled / fill the ink cartridges, then the first step that I would say is to replace these cartridges a genuine HP toner cartridges.

  If not the toner cartridge, then it would be one of the components of hardware printer that is at issue, where a Tech HP may need to perform a physical inspection of the aircraft and the error condition.

• Windows Vista Ultimate Edition with HP Color LaserJet CM1015 MFP

  I'm running Windows Vista Ultimate, the computer was bought in 2008, 32-bit.  I also use HP Color LaserJet CM1015 MFP - about once a year, I have a major problem with the scan software & Windows Vista.  Both machines are in good working condition.  This time, I actually uninstalled the HP software and bought a new CD from HP specfically for Vista and installed the Vista software for the HP mfp - however, the scan option does not appear in the center of HP solutions as a button.  This is a feature I've always used.  What is the HP Solution Center is the scanner is not installed - although in the installed software.  Last night, I downloaded a patch and that did not correct the problem.  In addition, the HP LaserJet CM 1015 is in 'scanners and cameras' in the Panel configuration, but not in the HP Solution Center...

  Hello

  1. your printer work?

  Try to find the drivers scanner HP, if that does not work then I suggest you contact the hardware manufacturer.