HP compaq dc7700 minitowers: Microcode error: no evolutionary device drivers/no pass

Similar Questions

• HP Compaq DC7700 tour: firmware error

  Hello

  I update my bios to version 1.10 to 1.16 because of the mistake of the microcode, jumped will fix my problem, but no, he's still microcode error at each startup, if there is no solution how to solve this pls help

  Thank you

  Hello:

  Please see this link below to find out how to upgrade the firmware.

  http://h30434.www3.HP.com/T5/desktop-software-and-how-to-questions/invalid-processor-microcode-update/m-p/5399213#M62390

• HP compaq dc7700 minitowers: BIOS update exe does not work

  I have the HP compaq dc7700 with mother 0a58h HP. I currently have the installed Intel e6400 CPU, but I have the Intel core 2 quad q9550 carrying around and based on the official list of HP upgrade that must be supported. So I put it (it was on the right track) but the only thing I got was 9 beeps of equal length. So I thought it was just that the BIOS update. I went to the drivers/software section and downloaded the update of the BIOS (from 01.15 to 4.02 or something). So I followed the instructions and extract the file. Then I opende the flash.pw file but it does not open! He repeated to me that I need the 32-bit or 64-bit version. I have 64 bit. I tried both and did not work. I downgraded to Windows 7 and did not work.

  But then, I thought the q9550 CPU uses 95W but the e6400 only 65W, but there should be no problem because he has on some power just do nothing I guess.

  Maybe I need to put it on a USB key?

  Please help me. Thank you

  Hello:

  The Q9550 is not certainly supported in the dc7700.

  The dc7700 won't work any processor with a FSB of 1333 MHz.

  The best you can do in this machine is the E7600, and he needs a 3rd party program until the multiplier.

  I've heard stories that someone installed the Intel Core 2 Quad Q6700 (2.66 GHz, 8 MB L2 cache, 1066 MHz FSB)

  Here's the problem with the file you are trying to install.

  This is a BIOS utility, not a BIOS update...

  The drivers have been completely erased from the HP support site.

  HP have a major problem with good number of pilots for hundreds of business PC.

  I don't know how they're going to solve this problem, but they have better.

  It's been weeks that these drivers have disappeared.

  I reported the problem 2 weeks ago and all they told me is that they are aware of the problem.

• HP Compaq dc7700 SFF PC can be upgraded to support a 2.66 GHz Intel Core2Duo (E7300) processor?

  My HP Compaq dc7700 desktop PC small form factor is equipped with a processor replacement of Intel Core2Duo 2.66 GHz (E7300), Stepping/CPU ID 10676, but I now have a start-up error message: "1801 - Microcode patch error.»  Missing or not valid processor updated Microcode.  "Please contact Hewlett - Packard Company for a new firmware update to support the new processor Stepping.

  (The computer start in pressing 'F1', but performance deteriorated due to invalid processor Microcode Update).

  I sent to HP, but have yet to receive an answer.   (They may have bigger problems right now!)

  The HP documentation for the dc7700 is ambiguous about whether if an E7300 processor would be sustained.  In this regard, the documentation recommends against editing processors more than 95W, but the E7300 is only a 65W processor (exactly the same as the original processor E6300).

  I've updated the PC system BIOS (786E1, Rev 1.16, the most recent available on the HP relevant support Web page):

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en & cc = us & prodNameId = 3232108 &...

  "(mais malheureusement, il semble que Rev 1.16 n'inclut pas une mise à jour de Microcode valide pour le processeur E7300)."

  It seems that I may need to wait and hope that HP will issue a valid and new Update Microcode for the E7300 dc7700 support page.  (With luck, the update of firmware would be included in an update of the BIOS which can be implemented through the windows, not via a legacy floppy!) 

  (I note that Intel provides an easy firmware update, but it is not easy for those who are running a Linux Enterprise operating system.  I am running Windows Vista Business 64-bit).

  This is my first post.  Thanks for all the tips on the problem that I outlined above.

  Thank you Paul and Frank,

  The evidence you presented against compatibility has begun to address substantial.

  Furthermore, it is probably not conclusive in itself, but Intel motherboards with a chipset Q965 (at least the names of the Council containing the string '965') also do not appear to support beyond E6700 processors...

  http://processormatch.Intel.com/COMPDB/SearchResult.aspx?BoardName=DG965SS

  I'd be happy to call my request 'resolved' - has answered in the negative.   Thanks again and well done! to each of you.

  With gratitude,

  Robert...

• HP Compaq dc7700 Convertible: I want to set the sound card

  I have HP Compaq dc7700 Convertible Minitowers PC computer (REF: RV742EC) and the operating system is windows 7 ultimate and I want to set the sound card, I want to help?

  Hello

  Please try:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=wk_128612_1

  Kind regards.

• HP Compaq DC7700 CMT Desktop - latest version of the BIOS

  Hello

  (1) I know the latest version of BIOS for HP Compaq DC7700 Convertible Minitowers desktop PC?

  The current system of Information is given below:

  Name of the operating system: Microsoft Windows 7 Professional
  Version: 6.1.7600 Build 7600
  Model: HP Compaq dc7700 Convertible Minitowers
  System type: X 86-based PC
  Processor: Intel (r) Core (TM) 2 CPU 6400 2.13 GHz, 2133 Mhz, 2 Lossnay, 2 logical processors
  The version of the BIOS/Date: Hewlett-Packard 786E1 v01.10, 13/04/2007
  SMBIOS Version: 2.4
  Physical memory (RAM): 4.00 GB

  Kind regards

  SV

  Hello:

  When you download the BIOS file that is run, and the first thing that will pop up is a set of web page - and the instructions for all the BIOS flash methods.

  I like the easy way to format a USB drive in the file system FAT 32, copy the contents of the flash BACK to the usb flash drive folder, plug the flash drive on the PC, start PC, tapping on F10 key to access the BIOS at the beginning of the HP welcome screen and using the 'Flash ROM system' menu in the BIOS.

• Compaq DC7700 CMT: Power supply Assembly for dc7700 cmt

  I got a HP Compaq DC7700 CMT (convertible minitower) and want to install my XFX XT power supply in it series.

  It seems that the holes for the screws may be different. No power supply is available for the side by side comparison.

  If anyone can check that?

  and, is it possible to install a "standard atx" PSU in this dc7700.

  If Yes, what should be done.

  The XFX PSU adapts physically, and it seems that the connectors on the motherboard are all compatible.

  My only concern right now is if the new XFX PSU moved to the back of the tower.

  I count on the installation of a hard disk with Windows7 on it, two spare HARD drive as the network maps and graphs updated

  Your correct, the PSU do not line up.

  What has been done in the past, it is what is in the photo. You just made an adapter plate.

  Be aware that only the Legacy graphics cards will work.

• Compaq mini 700: Compaq mini 700 laptop error fatal system shut down.

  Compaq mini 700 laptop error fatal system shut down.

  CNU9144WRX

  can you pls give me a current password. my mini doesen´t have a.

  THX

  Hello

  Enter: e9lo3vvdb4 (to be noted that in both cases, the 3rd character is a lowercase L)

  or

  e9lo3vvdbr

  Kind regards

  DP - K

• HP compaq dc7700 ultra slim: Simple PCI communications controller

  Hello

  I will appreciate if someone will help me to find the link to download the driver for my Hp Compaq dc7700 ultra slim 32-bit win7 desktop.

  For PCI CONTROLLER of SC hardware ID:

  PCI\VEN_8086 & DEV_2994 & SUBSYS_2803103C & REV_02
  PCI\VEN_8086 & DEV_2994 & SUBSYS_2803103C
  PCI\VEN_8086 & DEV_2994 & CC_078000
  PCI\VEN_8086 & DEV_2994 & CC_0780

  Thank you.

  You are the very welcome.

  This is why I suggested that you manually install the driver if the automatic installation method does not work.

  Certainly this is the driver you need, and there is no version of Windows 7 from this one.

  I gave this driver to dozens of members of the forum and it worked for them in W7, W8, and W8.1.

  I am also sad to announce that, for some members of the forum for a reason you can that will allow the driver to install and to do this, I don't know why the same driver runs on the same computer for some and not for others.

  Here's a partial copy and paste the contents of the driver installation information file.  As you can see, the hardware ID you posted is supported by this driver.

  ; - Manufacturer and models Sections.

  [Manufacturer]
  % MfgName % = Intel, NTx86.6.0, NTx86.5.2, NTx86.5.1, NTamd64

  [Intel.NTx86.6.0]
  ; DisplayName Section DeviceId
  % HECI_DeviceDesc % = HECI_DDI, PCI VEN_8086 & DEV_2974
  % HECI_DeviceDesc % = HECI_DDI, PCI VEN_8086 & DEV_2984
  % HECI_DeviceDesc % = HECI_DDI, PCI VEN_8086 & DEV_2994
  % HECI_DeviceDesc % = HECI_DDI, PCI VEN_8086 & DEV_29A4

  If you don't know how to manually install a driver, here's how...

  Go to Device Manager and click on the controller Comms Simple IBOS who need pilots.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp34743.

  Make sure that the include subfolders is selected and I hope that the driver will be installed.

  If this does not work, then the only other suggestion I can offer is to try the driver directly from Intel.

  https://Downloadcenter.Intel.com/download/11559/AMT-Intel-AMT-Sol-driver-for-965-chipset-based-Intel-Desktop-Boards

  If this does not work either, unfortunately, you will be one of these people where you have to live with this uninstalled device.

  This device has no effect on the functionality of your computer if it is not part of a corporate network where things can be done to manage the remote PC.

  If you use it as a PC at home, except the frustration of not having a 'clean' Device Manager, you will be fine.

• Audio drivers HP compaq dc7700

  HP compaq dc7700 audio drivers with windows 7 64 bit

  Accept the agreement.  Download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• Error "no Audio device is installed".

  IM using a Hp Compaq Notebook 6300 on windows 7 and ive only got ive of error no audio device tried all the tutorials there as uninstall and install, but not luck, someone know how I can fix this problem its driving me crazy!
  also, Ive restored the computer and its still does not.
  http://www.use.com/AAAHHHH_a2d4e5b17a5248dd7f9f#Photo=2 <---- 2="" pictures="" or="" my="">

  As you can see there is literally not a playback device and I do not know how to resolve this :(

  Hello

  Yes I looked at the pictures, but I know exactly what they showed.

  If you have used these methods and issues continues then you probably have a
  hardware problem. Check with a computer shop that makes its own internal service or

  HP support.

  ========================================

  IF you have done ALL of the methods suggested above then possibly a
  Will help to repair the Installation. (It is less likely to help if the foregoing
  methods were not used for the same conditions and settings
  would still be in place).

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  After installation to repair repeat the above methods if necessary.

  ========================================

  You may try to use a USB sound card that is not expensive.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP DL380 Gen9: HPDL380 Gen9 GRUB! error: no such device: HPEZCD240

  I have to install the operating system in a new Gen9 DL380.

  It has two SATA drives.

  After starting "Inteligent Provisioning", I get the following error message:

  "error: no such device: HPEZCD240.

  No idea how to solve this problem? Is there another way to set up the matrix of discs?

  Thanks in advance, Miguel

  I found the solution in page 10 of the manual http://www.hp.com/ctg/Manual/c04419967.pdf

  I was because I added a GPU, and I plugged the monitor the GPU video output.

  From the Manual:

  Cause all the Gen8 and Gen9 ProLiant servers provide only video F10 on the integrated video card and through the remote console of the ILO. If a GPU is installed in addition to the integrated video card, the software is unable to determine the "right" monitor at boot time, and F10 video redirects to the virtual video of the ILO or the integrated video port.

• Equium A60-157: error caused by device driver

  Hi all

  I try to write my thesis at the moment and am hampered by my laptop! It keeps randomly, which brings to the top of the blue screen of death, then by restarting; When everything is loaded to the top, I get a "serious error" message that says "error caused by the device driver. As far as I know, all the programs I have are compatible... I was advised to restore the factory settings, which I did a few months ago. And I got the BIOS update for my computer. But it is always the case!

  If it helps, the programs I use daily are Microsoft Word, Access, Powerpoint, Internet Explorer and MSN Messenger. I do not run any games high spec (only Minesweeper occasionally!)

  What can I do? Does anyone else have this problem? Any advice would be much appreciated, because these accidents do not help us to my work!

  Thank you...

  Hello

  It's not easy to tell which device is causing the error.
  What you can do is to check the device drivers. Visit the page of the Toshiba driver and check if there is a new version of driver for example graphic driver.

  Also sometimes this error message appears if the module of memory is faulty.

  What you can do is to use the Microsoft Online Crash Analysis.
  Maybe if you can identify this evil s.
  http://www.Microsoft.com/windowsxp/using/Setup/expert/northrup_03october06.mspx

  Good luck

• Tried to use iTunes to restore iPhone 5s, but the 17 error happens: "this device is not eligible for the requested build". No problem to enter the mode of recovery, apple server and the internet. Help?

  I tried to use iTunes to restore my iPhone 5s, but the 17 error happens: "this device is not eligible for the requested build". No problem to enter the recovery mode, connection to the apple Server (the software update download was complete) and internet connection. Help? I do an Apple store to restore?

  Error 17 refers to network problems. Take a look at these articles and try the suggestions:

  Solve the iOS update and restore error in iTunes - Apple Support

  Get help with iOS update or restore errors - Apple Support

• "Error in initVXIlibrary. Impossible for kernel init device drivers. »

  Hi all

  I'm trying to fix a WAYBACK test system - running windows 3.11 with CVI talk to a box of 1261 B VXI Racal. Everything was fine until a VXI power capacitor has failed.  Astronics got the p/s fixed in a few weeks, but nothing has worked right since.

  Common symptoms are without note errors on VXI diagnostics display, but when the CVI application tries to start up we get the error message fatal "error in library VXI init. Impossible for kernel init device drivers. »

  I think that the message indicates a failure of communication between the communication MXI, one in the PC and the other cards in the VXI.  We tested both cards in another system and they work fine.  RESMAN does not Windows run and I have a DOS version to try.

  Someone at - he a clue as to what means the error message or what could cause this problem?  I drive 500 miles from Pittsburgh PA to Rochester NY Sunday to get their hands on this machine again and sure could use some help...

  Big thanks,

  Clancy

  WELL THE PROBLEM HAS BEEN SOLVED, IF NOT UNDERSTOOD - AT THE SUGGESTION OF THE SELLER, WE REINSTALLED THE DRIVERS VXI KIT.  HE TOOK SOME PLAYING WITH THE UTILITIES THAT WERE INCLUDED IN THE KIT, BUT THE THING SUDDENLY STARTED WORKING FINE.  I THINK THAT SOMETHING JUST NEED RESET AND THE RE - UP PILOT DID...