HP coolsense error.

Similar Questions

• HP 15-ab150sa (ENERGY STAR): CoolSense

  Hello...

  HP happy user here... I had to reinstall Windows on my computer and all the drivers installed fine, but have error when installing CoolSense. Nothing major, but it is kinda nice to have it in my system.

  Exact error, I have said that Net Framework (some version) must be installed for installation to continue. Then it asks me if I want to download it? So I click on Yes and then get the error from the installer indicating the most recent version is already installed you don't need to install this version.

  So my question is how can I solve this problem? CoolSense requires Net Framework but apparently I have a later version in my system so what do I do?

  Thanks in advance for your comments...

  Hello

  Try the following.

  Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select programs and features.

  Click Windows turn on or off features in the left pane.

  When the window is loaded, enter a check mark against .NET Framework 3.5 (included .NET 2.0 and 3.0) then click Ok and follow the procedure to install it.

  When this has completed, restart the laptop.

  Let windows take over completely for a few minutes, and then try to re-run the installer to CoolSense.

  Kind regards

  DP - K

• HP coolsense crashes my computer

  Lately when I opened my hp coolsense just fine, but when I press settings or shut the computer just... breaks down. A blue screen appears and begins the dumping of physical memory in the hard drive or something. I tried to fix it by reinstalling the coolsense hp without modification.

  Any ideas what it could be? I registered just to make this question because I can't find anything similar to this.

  In addition, the crash itself is very inaccurate since it just says there is an error and windows closed to protect my computer, does not say what exactly is the error.

  HP dv7-6165, windows 7 64 bit

  Hi Aurum34,

  Thanks for this update, now in the past, if you remember, you already have previous problems with the installation of any type of software.

  If I was helpful, or if you want to say thanks you can click the White Star under my name to give me congratulations.  I really appreciate it.

  Please answer as soon as possible.

  Thank you

• G0T59AV: Missing Coolsense and weird problem with graphics chip intel

  Hello

  Due to many problems I had with Windows 10 I reset my windows. After that, I downloaded all the drivers from this link. I have two problems:

  1. There is no driver for coolsense in the list.

  2. when I try to install the graphics driver intel I encounter an error that says my system does not have the minimum requirements .

  P. S.

  --------

  My address is up to date.

  I checked the intel driver with Device Manager and it says my graphics driver is up to date.

  Regarding

  Hi @massoudd3j,

  Thank you for your query.

  I understand that you updated to Windows 10 but due to difficulties, you did a reset back to Windows 7.

  You install the drivers for the DESIRE for laptop - 15 t - k100 CTO HP software and drivers , but have been unable to install the graphics drivers or locate the software feel cool.

  To install the graphics drivers download and save the appropriate driver in a location known as your office.

  Uninstall and remove the graphics drivers.

  Restart your computer.

  Now try to install the driver of the saved DOWNLOAD.

  Uninstall the software Cool sense.

  Restart your computer.

  On the page of software and the driver under "Software Solution", you will find the software Cool sense. Download and reinstall.

  To say thank you for answering please click the icon below thumbs up .

  If this solved your problem, please alert people by choosing the solution provided.

  Good luck!

• DV6 6b57el: cannot install HP coolsense on windows 10

  Hello

  I recently did a clean install of windows 10 but I am unable to install HP coolsense 2.2, when I run the installer, I get this error: the application has been blocked for security reasons. Dialog also says unknow author.

  Any solution?

  I got the answer from the Expert HP with link to a version that works for me! ftp://ftp.HP.com/pub/SoftPaq/sp65001-65500/sp65424.exe

• HP AC125TU (N8M38PA): cannot install HP Coolsense on my laptop

  Whenever I try to install HP Coolsense it says 'there is a problem with this Windows Installer Package. A program run as part of the Setup program has not finished as planned. Contact your provider staff or the support package'

  Is it necessary to install this software on my laptop?

  Someone please help!

  Thank you

  Hi @iashu,

  Thank you for your query.

  I understand that when you tried to install the HP CoolSense software, you have received the message error "there is a problem with this Package of Windows Setup. A program run as part of the Setup program has not finished as planned. Contact your supplier of staff or the package of support ".

  What precipitated the need to reinstall the software?  Were there recent changes? Want to know if it is necessary to install it. HP CoolSense technology is a feature of some portable HP that combines hardware, software and mechanical design dynamically manage the temperature of your laptop, and help you stay comfortable while using it. As overheating may cause problems much, I highly recommend the installation. To try to overcome this difficulty, please try this link (from microsoft.com) solve problems that block the programs are installed or removed. Once you have completed that step retry the installation of a new download. You can also try to do Safe Mode Setup. HP computers - Windows 7 Safe Mode.

  Please let me know the results.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution" down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos.

• Pavilion laptop - 15-ab262nr: HP 3D DriveGuard and Coolsense software does not install

  Reinstalled Windows 10 on this PC laptop shortly after purchase (clean install to remove all the bloating) and

  Software HP Coolsense and DriveGuard will not install. After having downloaded DriveGuard and try to run the installer, nothing happens, so I go to the list of programs and see here but it is grayed out. Tried the latest version 6.0.28.1 Rev.A. When you try to install Coolsense I get an error message that the software of .net framework must be installed, but it is already part of Windows 10.

  Anything can happen on the ideas?

  Thank you!

  Hello

  CoolSense requires .NET Framework 3.5, which can be present on a new installation of Windows 10 - you can check it as follows.

  Hold down the Windows key and press R.

  In the run box, type appwiz.cpl , and then press ENTER.

  In the left pane, select "Windows turn features on or off" and let the list populate.

  If .NET Framework 3.5 (included .NET 2.0 and 3.0) is not selected, add a check mark, and then click Ok.

  Once installation is complete, restart the computer, let Windows take over completely for a few minutes, and then try to re-run the installer to CoolSense.

  As far as HP 3D DriveGuard is concerned, you could try the following.

  Hold down the Windows key and press R.

  In the run box, type appwiz.cpl , and then press ENTER.

  Make a right click the entry for HP 3D DriveGuard and choose uninstall.

  Once complete, download and reinstall the Chipset driver below.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72862.exe

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Yet, once it finished, reboot the laptop and let Windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• HP Coolsense go/do not reinstall

  HP Pavilion dv6 6182nr laptop

  Windows 7 64 bit

  I have authorized HP Support Assistant install updates and it deleted the computer Coolsense.  Then I tried to reinstall coolsense and received the error message on the photo below.  Any help would be much appreciated.

  

  Hey OhYouCoward,

  Try the following.

  Open windows control panel, open programs and features, right click on the HP software framework entry and select uninstall.  Once this done, also check if there is an entry for HP CoolSense and if there are, uninstall the present as well.

  Once completed, restart the laptop.

  Tap here to f10 as soon as you start Notepad to open the menu of the Bios.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has completely recharged, download and install the latest version of the HP Software Framework on the following link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-91931-1

  When the installation is complete, restart the computer again.

  Then, download and install the CoolSense application at the link below.

  HP CoolSense v2.0

  Once the installation is complete, check if CoolSense now works properly.

  THX

• used to install HP coolsense

  I used hp coolsense in the past and recently noticed it was no longer included in support Wizard, and the .exe file has been removed from my computer.  I followed the instructions online to level coolsense 1.0 to 2.1 and still nothing.  Is there something that I am missing?

  Hi Meaganite,

  I'm extremely sorry for not checking this before. I see that the original of your laptop specifications had no sense Cool HP and have checked my internal resources that this laptop cannot support Cool sense. I'm sure that you will not like to hear what you really love the software, but it's true about the laptop you are using. HP Cool sense is supported only on selected models that came with it. Try to install the software on a laptop that came with it will give an error or could appear to work for a few days, but the software is not really help the cooling occurs more efficiently and eventually disappear from the computer.

  Please refer to the section that says ""HP CoolSense taken is supported on all laptop models? " " the following document. http://support.HP.com/us-en/document/c02638953

  !------------------- Please click on the star of CONGRATULATIONS on the left to say 'thank you '. Check the box "Accept as Solution" if she answers / solves your problem. Thank you-----------------------------------------------------------------!

  I am an employee of HP.

• HP recovery error

  Product name: HP Pavilion dv6 6119tx

  Product number: QB365PA #ACJ

  OS: Windows 7 Home Premium 64-bit

  Error message: "restoration incomplete. "Please select one of the 3 options: Save Log, details, try again."

  I have a set of recovery disks. I have tried Factory reset on my system (with CD), and so my whole HARD drive has been formatted. While making the resumption of growth in the always stopped at 40% (tried 3 times) progress bar, I even waited patiently for 4 hours to let the process complete but finally got the error: 'Destination drive not found '. I did some tests of HARD drive and found everything is OK.

  The Recovery Manager has worked well up to 25%, then it asks to insert disk 2, then it still works very well up to 40%. The process still stuck at 40%! So, I it could be an error reading associated with the 2nd drive. So I tried to copy the disk #2(on desktop) using ImageBurner and it reported an error to read past copy of 63%; which confirms that there is a problem with the disc of ths #2.

  But I do not know how, MagicISO maker managed to copy the disc #2 and so I burned the image to a new blank disc. I started the recovery process, and this time it has not stuck anywhere! So after having successfully copied data from all 3 recovery disks, I got a prompt to click on continue button to reboot (normal, no error). But after the reboot, the problem starts: cmd appears for 3-4 seconds then a sreen appears saying: "restoration incomplete. "Please select one of the 3 options: Save Log, details, try again."

  After you click 'Retry', he invites me to enter a recovery media. I enter the disc #1 and technology makes me click on continue button to restart. After the reboot, the cmd appers, this time something different, written on it: "upDrvLetter: C:.

  He waits 3 seconds, then shows a few lines of error like "file not found"(tout cela est imprimé dans le cmd). "» So finaaly I again get the error "Restoration incomplete" with 3 options of same. Yet once I clicked "Retry", "Continue", once again same cmd screen with ' upDriveLetter: C: "and blah-blah-blah!

  What should do? After all this, I conducted an operation are erased using KillDisk (written block 00 on each byte of the sector. I spent 3 hours for this). Performed tests drive HARD and using the BIOS memory test. And yet once I tried restoring with my drives recovery, but without success! Yet once samething happens!

  What should I do now? I don't want to buy a new set of recovery disks. Please tell me an alternative to that. What can the O with the damageg or corrupted disk #2?

  Hello

  To answer your questions in order.

  You may be able to activate through the internet, but the activation process will recognize a key OEM and retail facility and this can cause his failure, while activation using the 'phone' will still work.  There is lot trying to activate via the internet first - if missing, you will be asked just to use the method of the phone.

  HP Coolsense must be installed with HP Support Assistant and described in This Document.  The latest version of HPSA are here.

  You should also be able to find most of your software and drivers here.  For example, Protection of the drive hard HP ProtectSmart found under "Software - Solutions."

  Trying to extract the disks of your software and the driver will be difficult.  If they are anything like my set of disks, they will be divided into several .wim files, some of which are very likely to be found on your bad drive #2.

  If you don't find that there is missing software you can not download and really want, your best bet is just to order a set of replacement of HP recovery disks here.  The price varies depending on where in the world you live, but they are usually not that expensive.

  Kind regards

  DP - K

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• SUMIF error

  I'm new to apple and get a syntax error when you use SUMIF.  In my table, I just need column F to test the value of column E.  If it is greater than 0, then divide by 20.  Thank you!

  In cell F1

  = E1/if(E1>0, 20, 1)

  fill down as needed

• An error in this Applescript that I can't understand

  Hi, I searched some forums and found this script below which I modified. It works great except for a single statement:

  runScript If = 1 then number error -128 I want the script to do is, when a USB drive is mounted and is in the ignoredVolumes as "USB Untitled" I want the script to stop. What I can't understand is, runScript is set to 1, "Untitled USB" Monte, runScript is not changed, why don't the script stops with an error "user cancelled"? On the other hand, if a key USB Monte is not in the ignoredVolumes, runScript is set to 2 and copy the file I want it. What hurts? It's probably something that will be very obvious when I see the answer.

  Thanks for any help with this problem,

  Mike.

  
  

  
  

  property ignoredVolumes: {'10,10 30 1. 5 't', 'files 1. 5 't', "Untitled USB"} - add if necessary

  property videoExtensions: {"avi", "mov", "mpg", "wmv", "mp4" and "mkv"}

  the value newVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / new")

  the value oldVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / old")

  game runScript to 1

                 tell application "System events".

  the value rootVolumes to disk (POSIX file ' / Volumes ' in the text)

  the value allVolumes to name of every element of disc of rootVolumes

  the value numofallVolumes to the County of allVolumes

  Repeat with the present book in allVolumes

  say application 'Finder '.

  if (the present book is not in ignoredVolumes and (this book as text) is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  runScript If = 1 then number error -128 - it does not give a 'User cancelled' error when "Untitled USB" is mounted

  runScript If = 2 then

                                                                          try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / new ") as text) to newVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in folder a." buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  Try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / old ") as text) to oldVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in the folder B" buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  display the dialog box "USB key will Auto Eject in 10 seconds or click OK... "buttons button 1 with the title"copy Complete - Eject? "default {'OK', 'No'} which gives after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the button returned of result is "OK" or gave up a result then ejection of the this book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  end if

  end if

  end if

  end say

  end Repeat

            end say

  The way in which your external block If is currently based, the script can't do anything when this book is in the ignoredVolumes, it can not yet test the runScript value. Try something like this:

  If the present book is in the ignoredVolumes then

  game runScript to 1

  on the other

  if (the present book as text is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  end if

  end if

  
  

  Of course, you need to remove a "end if' the end of the script.

  
  

  
  

• error message when try to sync the iPhone, "invalid response from the device?

  What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

  -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.

• Display Rotation error

  Hello

  I had a problem with the rotation of the screen under macOS Sierra function. As the screen rotates, there is an error that pop up and later that I'm unable to get into system-> Display Preferences. It is for me a "mistake preferably: County not load display preferences" message and I was unable to rotate the screen back. I started from the system in safe mode and temporarily solved the problem. But if I want to rotate the screen again, it pops up the same error again. I was using the rotation function pretty well in OS X El Capitan. But since I updated to macOS Sierra, I had this problem.

  I wanted to know if there is a lasting solution to this problem.

  I'm using macOS Sierra on MacBook (13-inch, early 2015) Air with processor 1.6 Ghz Intel Core i5 and 8 GB memory DDR3 at 1600 MHz with 128 GB of storage.

  Hello PavanGJ,

  Thank you for using communities Support from Apple. I see that since upgrading to Mac OS Sierra problems of screen rotation. The preferences window does not. I know how it is important for your Mac to work reliably. I'll be more than happy to help.

  Great job to test mode without failure. In Safe Mode disables most of the third-party services, it could be a compatibility problem with an application that you have. Check out this article:

  OS X El Capitan: If you have problems with startup items

  You can not hold account that the title suggests it's to El Capitan. It applies to macOS Sierra as well.

  You can also test the issue in a new user account.

  How to test a question in another account on your Mac - Apple Support

  Let us know if that helps.

  Take care!