HP deskjet 2400 series PSC front lights blink

Similar Questions

• Satelite L775 used high power - orange light blinks 5 times

  Greetings,

  I bought my Toshiba Satelight new l775 7 months ago, it's so crazy. It used to be on, I use the laptop connected to the adapter 4 to 8 hours a day, then the laptop goes unused and unplugged for 16 to 20 hours a day.

  This is my 3rd phone, I know that I put more tension on the previous two (HP and Acer). I've never had a laptop go on me this quick, even this acer laptop $ 300 crossed more tension and never went out in the 15 months that I got it.

  My laptop backup is a HP of 4 years, I've had it for 4 years, its fell several times, used and abused still underway! I just had to level of ram and hard drive. But, this Toshiba! She was so beautiful when I saw him!

  I have never dropped it, never spilled something on it, so why she put me through that stress at a bad time?

  A bad time because even if I'm under warranty, I'm leaving on vacation in 2 days! I need it, I'm not trying to take my old HP that came out in 2008.

  I can't afford to send my Toshiba for 2 weeks, not immediately.

  Today, my anti-virus software was his typical scheduled scan, I didn't charge the laptop, because I was out of work, so when I leave the laptop gets used more and charged additionally. I look at the laptop and its judgment, I just thought, O... my battery died, I would plug in the adapter and do some reading. Nothing good happened. 8 hours later, I worked on it for more than 8 hours, I searched all over google, many forums, none of the following solutions worked for me.

  Disconnect the battery and press power for 30 seconds
  Unplug the adapter and press power for 30 seconds
  Disconnect the battery and the adapter and press power for 30 seconds

  (of course after the 30 sec thing, I tried turns on normally, with or without battery and power adapter).

  I pulled the little battery round, hard drive, memory sticks (even changed the 2 around and I tried each one solo) I tried without any ram. I unplugged all the excess material, the only extra things I had was my usb mouse, but I unplugged that, even pulled the CD-ROM drive.

  I removed all water-cooling, open the laptop to see if I saw something a coward, I don't see anything, the part where the adapter will seem a little loose, but it seems to go all the way and fine. I pushed hard and still nothing.

  One thing I will say... I read at least 8 other fairly new poster of Toshiba satellite owners with similar problems of their laptop does not turn on. This isn't a good glance, since this is the first product of Toshiba, that I bought it and it costs $500 more than my acer laptop which gave me no problem in my 15 months of owning...
  I'm not belittling Toshiba immediately, this problem might be a small question (I hope), I could be my fault, so I'm not belittling Toshiba again because I like a lot about this laptop, especially the graphics!

  Return to this topic after watching the discussions of people with similar problems, I noticed, nobody had the same exact problem I'm having. See most of the threads I have read, people would still get the orange light when the battery has been driven. I ONLY get the orange light when the battery is in the laptop. I try and power without the battery and nothing happens, no light flashes. Many other people were always other color lights or lights in different locations, my only light flashes 5 times, the second place left and is orange.

  The only light that blinked in the last 8 hours is the second light from the left (I think it's the power light) and it flashes orange or maybe its red light... but when I press the power (I tried holding, tapping, etc...) that the orange light blinks 5 times and stops, nothing happens I don't hear any readers of spinning, everything is just dead.

  Thanks for the time and help!

  Hi a8000

  Looks like you already tried all possible solutions
  The flashing light indicates that there is a possible hardware failure, but it is not possible to say what part is malfunctioning, it might be the motherboard
  However, the guarantee seems to be valid so don t waste time and report it to the service provider in your country, they should solve this Toshiba!

• Recent update for my HP Deskjet 3510 Series does not install

  The recent update for my HP Deskjet series 3510 printer will not install.  I tried the store several times and get the same error on the result: recent installation updates unsolved problems.

  The update is called: Hewlett Packard Imaging Null Print HP Deskjet 3510 series.  The error code that comes up is: 80070490.

  I am running Windows 8.1 and use HP Pavilion g7 - 64 bit laptop.

  Can someone help me?

  Hello Redjerseylinda.

  I understand that this update of the printer is not installed. I will do my best to help you, and there are a few options to consider:

  You can skip this update and all other HP updates. Updates are not essential in the slightest. If that's what you want to do, you can uninstall HP updates from Control Panel, and then restart the computer.

  If you want the update has been installed, you must uninstall and reinstall the printer software. You may use the software update to install this update.

  Please answer as soon as possible. I'm only here to help!

  Mario

• HP Officjet Pro 8600: Power light blinking and can't turn on or off

  Printer has power light blink and wll not turn on or off

  [Moved from comments]

  Hi neuserivergirl,

  1. have you made changes on the computer before this problem?

  2. which version of the operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can disconnect the power cable from the plug, and then try to turn on or off.

  It seems to be a hardware problem, I suggest you contact the manufacturer of the printer for assistance on this issue.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

• HP 5400 printer light blinks, but does not print

  HP 5400 printer light blinks, but does not print

  Hello theguttu,

  We will try to uninstall then reinstall the printer in a specific way:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver with the latest version of the Brother's Web site.

  4 reinstall the printer.

  Also, here are some references of printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Best regards

  Matthew_Ha

• HP Deskjet 2544: HP Deskjet 2540 Series not found - Error Message

  Hello

  I'm getting "HP Deskjet 2540 Series not found" - Error Message When I tried to scan...

  I have recently upgraded to windows 10. I get the same error message when I trobleshoot using 'doctor print and Scan '.

  Please fo help me solve this problem...

  Thank you...

  Hey @HpUser83,

  Welcome to the Forums of HP Support!

  I would like to help you today to resolve the 'HP Deskjet 2540 Series not found' scan error you get when the all-in-one printer HP Deskjet 2544 scanning to your computer Windows 10. There is probably a software or driver error occurring. Can I please you follow the steps below to resolve this error.

  If you use a USB cable between the printer and the computer connection, please unplug this cable now.

  Step 1: Remove the driver:

  1. click on the Start button

  

  2. type programs and features. If a search does not start automatically, you will need to type programs and features in the area of "Ask Me anything".

  3. click on programs and features to launch the window.

  4. in programs and features, will populate a list of the programs installed on your computer. Please scroll down and look for your HP Deskjet. If you see your HP Deskjet in the list, click it and choose Uninstall.

  5 follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete successfully please close programs and features.

  6. then, click on the menu start of new

  7. this time type devices

  8 click on devices and printers to launch the window.

  

  9. in devices and printers are looking for your HP Deskjet. If you see if if please right click above and choose 'Remove' or 'Remove'.

  10. Once your HP Deskjet printer is more than showing in devices and printers please click on any device in the list of Printers once just to highlight. Click the print server properties on top

  

  11. click on the drivers tab

  12. look for your HP Deskjet printer driver. If the list, please click it and choose delete

  13. Select delete the driver only

  14. Select OK

  15 click apply and OK in the print server properties window.

  16. close devices and printers. Please proceed to the next step.

  Step 2: Remove temporary files:

  1. click on the Start menu

  2. type run. Click on Run to launch the run dialogue box.

  

  3. tap folder in the run box, and then click OK

  

  4. when the Temp folder, open select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.

  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.

  6. close the Temp folder when it is empty

  7. right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install the device:

  1. Please click here to download and install the package to the full functionality of the software and the driver for your printer
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. If you use a USB cable connection, do not connect the USB cable until the installation program invites you to

  Once the installation is completed successfully, please test scan.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• P1102w: P1102w - orange light blinking - won't initialize

  My printer won't boot and the orange light blinks. I tried to uninstall and reinstall the printer driver and firmware.  It also shows 'it can run out of toner' when I know that it is not. Cannot print page of test or anything else that he does not communicate with the computer. Help!

  Hey @cbloom57,

  Welcome to the Forums of HP Support!

  I understand that you have an orange light flashing on your Laserjet P1102w printer range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute. If you still see a flashing light orange, then the printer is more likely to have a recoverable hardware problem. This document explains How to resolve error lights on the printer.

  Please let me know the results after following the above. If you are able to clear the blinking light, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP deskjet 6980 series and windows xp

  Currently I have vista on my laptop, if I buy online, would windows xp will be compatible with hp deskjet 6980 series?

  Visit software & drivers for the latest HP Deskjet 6980 downloads include those for Windows Vista and Windows XP. Carey Frisch

• HP deskjet 5520 series software and Windows 8.1

  Hello world.

  I have a HP Deskjet Ink Advantage 5525 and a laptop with Win8.1 64 bit. I just downloaded and installed the package DJ5520_1315 - 1.exe.

  And every time a double click on the shortcut "HP Deskjet 5520 series" nothing happens. «Looking at the properties of the shortcut, I found ' 'series.exe series\Bin\HP Deskjet HP Deskjet HP C:\Program 5520 5520 '-Start UDCDevicePage".»

  I can navigate to the Printers page and see many seetings and options, as well.

  Any ideas?

  Kind regards

  Karim A. Harb

  Monterrey, MX

  Karim A. Harb
  Monterrey, MX

  Hi Karim,.

  Try to install the patch below and check if that helps, but you describe slightly different behaviors that should help you resolve such a:

  http://support.HP.com/us-en/document/c03640384

  Please let me know of any changes,

  Shlomi

• 'HP Deskjet 3520 Series' shortcut opens in Notepad on Win XP.

  I have a Windows XP SP3 computer has 1.5 GB of ram. Just bought the printer, a series of e-all-in-one HP 3520. I just installed the driver software, first of all the Cd, and then the installation file downloaded from the HP web page. I uninstalled between 2 facilities. I can print and scan OK, but when I double click on the shortcut 'HP Deskjet 3520 Series' on files in Notepad from top 2 Open Office. Does anyone have the same problem? Does anyone have a solution to this problem?

  Hi rascal2,

  Root cause:

  A default program to open this file has been correctly defined.

  Download and run the file below. Let me know what you find?

  Update of file association

  You can also consult the document below

  HP Printer Wizard opens with an error in Script or in Notepad

• LaserJet Professional P 1102w printer green light blinking, but will not be printed

  I had my P of professional LaserJet 1102w for a little less than a year.  I use it very rarely and very slightly (I've probably printed total less than 25 pages).  It has always worked well.

  But in the last 2 weeks, it stopped printing.  The Green led comes on, but it will not be printed.

  I went through the troubleshooting diagnostic tests on my computer (HP Pavilion, Windows 7 operating system).  The result shows that my computer detects a problem, but it cannot identify it (for example, no paper jam, no toner, etc..).  I manually checked it for a paper jam too.  I have not seen any problems.  I turned off, unplugged, he turned his back.  She still does not print.  And now the green light blinks, even if I turn it off several hours ago.

  Help, please.  Thank you.

  Update: I realized what it was.  My USB cable was very slightly loose.  I don't see when I checked manually the printer the first time.  But I checked a second time and just pushed him tighter.  Problem solved.

• need to find the printer driver for HP deskjet D2460 series...

  need help to find a printer driver for my HP DESKJET D2460 series... have no original disk...

  Surely you would visit the HP website > support > downloads for your specific model

• DeskJet 3900 series: what then I do with my printer hp deskjet 3900 Series, since there is no driver for windows 7?

  I need a software/driver to use my printer deskjet 3900 series Windows 7; HP and Microsoft should help me please

  Thank you

  Well, I found this.

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-DeskJet-3900-drivers-for-Windows-7-operating-system/TD-p/760507

  But the document is no longer available.  Printer must be very old.

• TX2517ca, will not start - blue LED - Num Lock & Lock lights blink.

  laptop just decided NOT to start a day... I can hear the fan and HARD drive activity minimal. I tried the Hard reset as directed by HP and removed the battery etc...  lights blink at the exact same time, stay on for 1 second and off for 3 seconds and then Flash simultaneously again and does not stop until I pull the power, there is no clicking, grinding, beep, nothing, nothing on the screen at all. The rest of the lighted buttons are lit in blue.

  FYI, I am a 15... computer technician home based at this time. so I pulled the memory, cleaned, air-dried to compress (1 GB & 2 GB), 2 of them and blue on the slots and reinstall even by only 1 at the time, no change, same result, flashing of the LED. Then I pulled just the hard disk connected to another machine as an external HARD drive, it works fine, I see the C drive and the disc of recovery without any problem. so at this point, I just shot from the card pile and leave for a while see if we can clear the BIOS/CMOS (I was wondering if the software is stuck in hibernation or sleep setting and when turn is only back to the similar condition, but represent no display on the screen...) so far points to CPU I think. Then after having replaced existing hard drive and try to start if it does not work, I have a blank hard drive to work I can insert to the hell of it... stay tuned...

  Also system Oh, hair Immaculate, not collected or dust in the ports of fan etc...

  Hello
  Click on the link below:
  LED white screen error codes

• Power light blinking XPS 8900

  I bought my XPS8900 a few weeks ago and immediately upgraded the memory up to 32 GB.

  Everything worked fine, but then I decided to upgrade the video card to an EVGA GeForce GTX970 SSC.

  This card requires a 6 and a power connector 8 pin that does not provide the power supply Dell stock. So rather that to return the video card, I have improved the power supply to a Corsair CX750M, I've read that other XPS8900 users have had success with this machine.

  As others have pointed out, this PSU is a tight fit, but I could get installed it. As soon as I turned on, my trouble started.

  The case and CPU fans spin, I hear the rotation of the drive upward, and I can open and close the dvd tray. So I know that the power supply provides at least a power. But I get no video, and on the top of the box, the power LED flashes amber model.

  I tried to go back to the video card and power supply dell stock, but still have exactly the same problem.

  I also tried unplugging the power cable and power for 30 seconds button. But still, the power light flashes orange model.

  I know there is no beep codes for the 8900 XPS and the sequence of flashing orange light power is used to diagnose the problem, but I was not able to locate any reference to indicate trends.

  The power light blinks a 2-7 model and repeats.

  Anyone know what this means?

  Follow-up:

  I had ripped all with no luck. Well, everything except the improved memory. He had worked, so I don't think that it would be necessary to remove it. But I was wrong.

  I went back to the memory of stock and the blinking orange light problem disappeared!

  Then I reinstalled the new memory, and it worked too!

  So I guess it was just that the memory should be seen.

  Not sure if the model of 2-7 means 'Question' memory, but this would be my guess.

  Since the 8900 XPS does not support beep codes, I hope that Dell will eventually publish what mean flashing light patterns.