HP Deskjet 3050: Change of cartridge number

Similar Questions

• HP Deskjet 3050 tri color cartridge problem

  I bought genuine HP ink cartridges to replace those I used quickly to the top. That black worked fine, but when I later put the tri color in the 'tri color cartridge problem' message came, and when I tried to print it stated that he was "damaged or did not. I tried to re-insertion and carefully clean the copper part without touching where the ink out. I don't really know what else to try, if it's just a faulty cartridge is there a way I can get a refund or a free replacement because it was pretty expensive? Thank you.

  Hi dsavz,

  I hope you were able to print correctly after changing the cartridge.

  Usually they could be exchanged for another cartridge in case of warranty.

  You can try to get back to the store to see if they'll exchange it for you.

  Because it was outdated at the time of purchase.  I would like to give it a try.

  Good day!

• HP Deskjet 3050: Problems installing ink cartridges

  I have a HP Deskjet 3050 all-in-in-one J610 series. I purchased & installed a black cartridge 61 and see the message on my printer: "authentic black HP print cartridge installed - ok. However, when I try to click on the button next to 'ok' nothing happens. I try by clicking New, or the one above (as in, maybe I clicked on the wrong button), and I turned my printer and turn it back on. Nothing changes. I'm unable to complete installation of ink cartridges and print anything.

  Can someone tell me what is the problem?

  Hi @TwoCharacters

  It's almost that the Ok button is not responding, or only works intermittently. You took the message of cartridge which means it must have admitted you pressed OK. What happens if you just keep trying to press OK, maybe try a little more pressure when you press it, or hold down the key longer than you should have to. Looks like it may be a hardware problem, you may consider giving us a call.

  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  I hope this helps.

• HP Deskjet 3050 all-in-one: cartridge hp not getting not

  Hello

  I bought my printer HP Deskjet 3050 all-in-One J610a United Arab Emirates. I bought it is with me to the India and looking for cartirage 122 which I'm unable to locate.

  Is there a compatible cartridge in India? Or I can change some settings of the printer so that it accepts another type of cartridge which is available here? Otherwise, this printer is just a piece...!

  Thank you!

  Hello

  In India, you must use the HP 802 ink cartridges, but you must call HP India and ask them how to reset the printer to accept HP 802. Please follow the instructions below:

  http://support.HP.com/us-en/document/c02558798

  Kind regards.

• How to replace ink cartridges hp deskjets 3050 has

  need to replace printers inkjet on hp deskjet 3050

  (new forum HP)

  Welcome to the forum, Griff.

  Your printer has its own website pages - in the section "Troubleshooting > How To ', come the instructions to change the cartridges:

  HP Deskjet 3050 has e-All-in-One Printer - cartridges

  The document includes a video to explain the procedure.

• Printer HP Deskjet 3050 has prayer after installing new cartridge HP

  After replacing the black cartridge the wrong printer aligns the chops from the top of the page and forget the lines print. I tried all the recommended soplutions. Even the alignment page has half of it missing, so is not recognized by the printer. Even if printing from my computer or just copy. Is there a way to reset top factory of the printer page and start again?

  Hi DavidAH,

  Welcome to the HP Forums!

  I understand that your HP Deskjet 3050 went wrong aligns the chops from the top of the page and missing print lines.

  I recommend the following guides:

  1.) "alignment Failed" Error Message displays on the all-in-one.

  2.) Troubleshooting print quality problems.

  3.) reset of the printer.

  Hope this information helps and have a nice day.

• HP deskjet 3050 j610 all-in-one problem with tricolor cartridge

  display printer with three colors cartridge.this problem is a unit recently news that functioned until what I moved the printer in another room today. can anyone help

  Moved from feedback

  Original title: hp deskjet 3050 j610 all-in-one

  What is the exact message that you found?
  My advice would be to pull the cartridges and make sure that the ink didn't sink. The printer "bumped" or dropped everything moving? The cartridges have been pot just enough to not be seated more.

  SC Tom

• HP deskjet 3050... new toner cartridge (61) seems to cause gobbeldy-* beep * printing

  Hello.  Mark here.

  HP deskjet 3050, black cartridge 61, Windows XP.

  Recently replaced my black cartridge on receipt of notice system that the ink was low.  Installed new cartridge, print alignment page alignment page scanned.  Now, the printer prints the correct image or text but has a lot of 'jump' and 'holiday' until the result is barely readable.  New cartridge was form Best Buy purchsed and door label HP so I think that it is authentic.

  Tried to uninstall and reinstall the new cartridge to no effect.  Even will not grant me a new alignment page.  In my view, a new alignment process would be the next step to try, but I can't force the system to allow this.

  Thanks in advance for your suggestions.

  Thanks to everyone who responded to my question with the printer cartridge.  After several attempts to solve the problem with your excellent suggestions, I broke down and installed a new cartridge.  Problem solved.  Apparently, I had a bad cartridge from Best Buy, where I buy all my stuff like that.  Because I don't have a receipt for this item for $20, I don't then take it back to Best Buy, but I certainly will ship the bad cartridge HP with a note.  I'm certainly not angry or disuaded from HP - I found their stuff as fairly reliable over the years.

• Deskjet 3050 a problem change from USB to wireless

  I got a Deskjet 3050 a printer attached via the USB port of my desktop HP Win7 64 bit for a year and a half. Attempts to convert the USB wireless. Instructions lead me the start--> all programs--> HP--> HP Deskjet 3050 J611 series a--> convert USB wireless.

  But when I open--> series HP Deskjet 3050 a J611, my only choice is:

  Connect a new printer or

  Add new software

  Nothing on the conversion of wireless USB. If I click 'connect a new printer' I have the choice of:

  USB connection

  Connection Ethernet / wireless

  Connect again later

  If I select wireless connection, it tells me to connect the USB cable. It is been connected for more than a year. But the button "Next" is gray and I can't move forward.

  If I select USB connection, it tells me to connect the USB cable. It is been connected for a year. The only choices I have are to return to a screen or check a box that says I'll connect it later, not now. I don't have to check but the 'Skip' button is gray and so I'm stuck again. I tried to turn the printer power off and moving the USB cable to the USB port of different desktop and power on printer again. I tried to reset the default printer on the printer control panel. The software does not believe that the USB is connected. This is the case.

  I pressed the button on the control panel of the printer wireless. It flashes blue.

  I'm usually pretty good with the resolution of this kind of thing, but I'm ready to break this piece of scrap on the ground and dance on his grave. .. .any help would be appreciated. Thank you!

  Hi Julie,.

  Thanks for the reply, sorry for the frustration. Here's what to do to uninstall it, in a more detailed form.

  • Click on the link above to access the driver removal tool.
  • Click on download and run.
  • Click 'Yes' when asked if you want to allow the following program to make changes to the computer.
  • A folder opens, look down and you'll see 'uninstall_l3' - select it.
  • The uninstall is running and restarts your computer.

  Now, it is normal to go forward, and then reinstall the printer.

  I hope this helps you, let me know how it goes!

• printing with deskjet 3050 with the color cartridge

  Can I print with that printer in black, with use or preplacing the color cartridge.

  Hi @cwat51 and welcome to the Forums of HP!

  I see that you are looking for in print cartridge options. I would like to help!

  You can use whats called cartridge single mode.

  I would recommend to check page 30 of the HP Deskjet 3050 a J611 series Manual of use.

  Please let me know if you have any questions. Thanks for posting on the HP Forums!

• 301 cartridge 61 AND compatibility Deskjet 3050 J610A UK version

  Have tried to replace my 301 cartridges with 61 cartridges, purchased in the USA on my Deskjet 3050 J610A...

  rises "Both cartridges are incompatible" and yet HP websit e and the new cartridge says cardboard 61 s are good for my printer.

  Would be grateful for the advice of anyones.

  Am in the United Kingdom

  Thank you very much

  301 s and 61 s are for the different regions. If you live in the United Kingdom you should use 301.

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/finding-and-installing-cartridges-after-moving-to-a-new/TD-p/740553

• HP Deskjet 3050 model number J610a

  Hi, I am unable to print from my Samsung Chromebook on my HP Deskjet 3050 J610a of model.  Can you tell me if my printer is ready Cloud or not?  Thank you!

  Hello

  HP Deskjet 3050 - J610a is not a printer ready for cloud. only J611 series supports ePrint / CloudPrint.

  Install the software that you have with the printer on your laptop.

  Make sure your laptop and printer is located in the same network to print from your laptop.

  Thank you

  Oliver

• HP deskjet 3050 has in a series of J611

  Installed black cartridge new, printer goes through the motions, ejects paper but not characters on paper for alighment. Even installed a second black cartridges and still no print

  Hello thomaslb, welcome to the forums

  I understand that you are no longer able to print in black ink with your Deskjet 3050 printer has. I noticed that you mentioned the printer will print a blank page as the alignment page and still won't print black after changing the cartridge.

  My suggestion for you would be to follow the steps described in this guide:

  The streaks of ink fixing, faded prints and other common print quality problems

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Thanks for posting in the community!

  Have a wonderful Wednesday

• DeskJet 3050 a-J611g / CR232A: 0X00759C98 HW_WATCHDOG C, what is error - code this? How can it be solved?

  Hello, I have a Deskjet 3050 a-J611g / CR232A. I am running windows 7 (variety, that is to say: etc. ultimate, home premium,.) code error 0X00759C98 HW_WATCHDOG C, what - what? How can it be resolved? The only thing that was changed was I enabled update automatic and put in place e print. Everything seemed fine, but the next time I went to my printer this wasd error on the screen of printer control button. Once the printer starts after reset it again. Is there a bad Council, which needs to be replaced? There seems to be nothing broken or out of place, that's why I think. Any help will be greatly appreciated! If anyone has the definition of this error, it would be very useful! Thank you in advance!

  This also happened to me. To fix it I just unplugged the printer of and held the power button for about 15 seconds. The only changes that have been made before the error occurred were:

  1: network SSID was changed

  2: tried printing without black print cartridge (later discovered that she had no effect)

  3: new software installed on computer (don't think it was the question whether)

  I hope this works for you too!

• DeskJet 3050 has errors in the press cannot use alignment

  Hi, I hope you can help.

  I just today inherited a second Deskjet 3050 J611 from a friend a hand. I'm setting up on my system and I have a problem with the alignment page printing.

  My system is Windows 7 64 bit and I have connected the printer wireless to my network. The thought I want to calibrate the printer I ran the alignment, but go looking at the alignment of the mine of the internet pages is decidedly not just. Some lines seem to be missing and the illustration at the end of printing is 'lines' with blank lines. Therefore, the analysis of the alignment fails. I also printed the windows test page and that seems doubtful too with the lines of print with the tops? cut, but some lines are intact. I've included a scan of the print-out of alignment if it helps to diagnose my problem. At least the scannner works!. I can print from my Ipad 3 even if the quality is not good and the same thing with Windows printing, I hope that if I can make the alignment that the seeds will disappear.

  I changed ink for new trucks and installed the latest drivers and software from the HP site.

  Please help if you can.

  

  In General, this kind of question is cleared up by the replacement of the ink cartridges. Especially with Deskjets and more with have received you second hand, the chances of the cartridge/print head (they are combined) being empty or clogged is very likey. I would as a first step, and if this does not resolve the issue here is a document of support on print quality issues which can also produce some more light on the question you have:
  
  
  
  http://www.HP.com/United-States/consumer/digital_photography/print_better_photos/tips/print-quality.html
  
  
  
  I hope that helps you out, and if you have any questions do not hesitate to contact me. I will reply to you as soon as I can.
  
  
  
  Have a great day!