HP deskjet 3050... new toner cartridge (61) seems to cause gobbeldy-* beep * printing

Similar Questions

• HP LaserJet P1102 CE651A does not recognize the new toner cartridge

  I installed a new hp for my Laserjet P1102 toner cartridge, but still get the message "install the black print cartridge"and the orange light blinks.  It worked fine until the toner ran out.  Have tried to reinstall the cartridge and you are using a compatible cartridge, without success.  Can I do, or do I have to repair the printer that appears to be a case to send far from a reconditioned unit?  I am disappointed that he didn't after intermittent use of less than 18 months. It was purchased as the reviews said it would be great for printing of volume, but I have not at this stage yet.

  Any ideas?

  I had the same problem. Remove all paper from the tray. Make sure that no paper is started in the printer. I then replaced the toner cartridge and it was recognized. It seems that if the paper is launched to feed into the printer, then the new toner is not recognized.

• HP Deskjet 3050: Change of cartridge number

  Hello, I recently put my HP Deskjet 3050 of the United Kingdom in Australia and so far rencenty used printers inkjet purchased in the United Kingdom.

  I have now bought cartridges spare here in Australia but I was told that the numbering system in Australia is different.  Therefore, I used to use 301 to the United Kingdom and now bought number 61, but my printer show the error message "both cartridges are incompatible."

  All solutions please

  Hello

  Make sure you have both black and three-color HP 61 available authentic cartridges and the printer connected and installed on a computer.

  Then contact the local HP Support, a technical support representative will guide you through the steps and perform a regionalization of the pen for the printer accepts local ink cartridges.

  You can find in the following link:

  http://WWW8.HP.com/au/en/contact-HP/phone-assist.html

  Kind regards

  Shlomi

• DeskJet 940c: new 78xl cartridge will not print on Deskjet 940c

  bought 78xl tricolor cartridge.  Have only used the 78 before regular.  New cartridge will not print.  Replaced by the old cartridge - printed perfectly.  When I opened the printer, the cartridges for the little happy face moving, I have not a clue as to what is happening.  I would simply return this cartridge?  The 78xl is compatible with the 940 c?  15 black continues to print well.

  ARGHHHH.  Help, please...

  Hey @JaniBee ,

  Yes I recommend you return the faulty new cartridge and replace it! If you buy the new cartridge and it fails well then let me know and we can look at the printer and excludes a faulty cartridge error.

  Get back to me and let me know! Have a great day and a wonderful holiday season!

• HP deskjet f4580, new black cartridge: printer only print color, no black

  Just replaced the black ink cartridge in my Deskjet F4580 wireless printer.  Cartridges have been aligned by three times, and they have been cleaned.  When printing or copying, no black ink is used.  Why my black ink cartridge, apparently, doesn't?

  Here a link to a document that deals with poor print quality in your printer model. It will give you trouble shooting to try to try to resolve the problem you are experiencing with your printer.

  If you have reached the end of this document and have tried another cartridge in the machine. Sought to be the replacement of the product. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  http://goo.GL/w7Hgh

• HP Deskjet 3050 tri color cartridge problem

  I bought genuine HP ink cartridges to replace those I used quickly to the top. That black worked fine, but when I later put the tri color in the 'tri color cartridge problem' message came, and when I tried to print it stated that he was "damaged or did not. I tried to re-insertion and carefully clean the copper part without touching where the ink out. I don't really know what else to try, if it's just a faulty cartridge is there a way I can get a refund or a free replacement because it was pretty expensive? Thank you.

  Hi dsavz,

  I hope you were able to print correctly after changing the cartridge.

  Usually they could be exchanged for another cartridge in case of warranty.

  You can try to get back to the store to see if they'll exchange it for you.

  Because it was outdated at the time of purchase.  I would like to give it a try.

  Good day!

• Hp deskjet 3050 a device I can not get my computer to print to my printer how do I set this up

  I have a Hp Office jet all-in-one printer 3050 and Hp laptop and I'm having problems to make my printer and computer to print my documents from my computer on my printer can you help me.

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems:

  http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer difficulty of:

  http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Printer Deskjet 3050 bought from Saudi Arabia

  Printer Deskjet 3050 has bought Saudi Arabia is it possible for my printer be adjusted for settings of the Asia-Pacific region

  Hello

  Please follow the instructions below to reset the printer in the new country/region:

  http://support.HP.com/us-en/document/c02558798

  Kind regards.

• Pro LaserJet M1212 nf mfp: Pro LaserJet M1212 nf mfp new ink cartridge prints on the desktop, but is no longer in the laptop!

  My printer is on a network home, connected as follows: desktop computer (USB); laptop (wifi).  I installed a new toner cartridge (secondary market) to replace an empty ink cartridge (secondary market).  Printer initialized and started on 'ready'  No error message.  A sheet of test sent my desktop prints fine, but my laptop refuses to print.  I have re-installed the latest version of the HP printer software/driver, printing and Scan Doctor (P & SD), which States that I have an error "printer."  I re - run P & SD several times, and at one point, a pageprinted test, but now nothing.

  Solved!

  Turns out that my installation of a new toner cartridge somehow missed to the top of my firmware, which reset the IP that my phone listed for my router.  So, I restarted the printer default, then re-installed the printer on my laptop and desktop with the latest firmware.  I needed to set the IP address - type it manually in the portable installation wizard - because the laptop kept one IP incorrect broadcast by my router, (which is meaningless, but there you have it).  Thanks to Sam in Calcutta.

  Desktop or laptop work fine, now.

• HP Color Laserjet MFP m277 Pro: can I put my old toner cartridge to finish?

  I hope it's a simple question.

  We changed the toner Cyan on the printer cartridge until it was over. There was a problem and we thought he meant that the cartridge is empty. The problem turned out to be something else. So now, I have a cartridge that is perhaps used three quarters and a new in printing.

  Question: when the CURRENT one runs out, I can put the previous again in the printer to use, without causing any problems for the printer?

  Thanks for any advice.

  Yes, you can put a Toner Cartridge used back with no problem, the printer may indicate its levels of toner correctly, but it can be used without any problem.

  Kind regards

  Shlomi

• HP Deskjet 3050 device non-reachable

  So, here's the skinny:

  I am running on a Macbook, OS X 10.5.8 and use a Belkin, WPA router and try to connect a Deskjet 3050 J610 Series.

  I have already successfully been printing, scanning, copying for a few months. In fact my last impression was a few days ago. Today when I tried to print it simply does not work. The print qeue says 'Print page 1 of 2, %2 Complete' and stayed there and does not finish printing. At this time, I tried reseting the printer, restart the Mac and everything. I then uninstalled the printer, reinstalled, reset the modem, restarted the computer, reset the system of the printer and I get the error "Device unavailable" and mumbo jumbo then as the device needs to be reachable, then make sure my Mac is connect me network. Of course, it is and has been. It worked fine until today. I have not done something to change. My network is protected by Word and everything. Been at it for hours and hours. The whole reason I bought this model was due to wireless connectivity and now it does not work why?

  I'll send this return soon if I can't fix it. Any help would be appreciated.

  At this point, your printer is probably connected to your router.  We will check that the first - print a Test of the network wireless at the front of the printer.  It shows that there is a valid IP address and that it is connected to your router?

  I really think that the problem is with your router.  Make sure your Belkin has the latest firmware.

  Finally, once you connect it set a static IP address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• HP Deskjet 3050 a-J611a - laptop wireless - wired desktop can print from it?

  I just bought the HP Deskjet 3050 a-J611a and installed wireless on my laptop. (the printer is in another room) We also have a desktop computer (my daughter her room) which is connected to the internet with a cable. I was wondering if it would be possible to also print from the desktop without having to use a USB Wifi key wireless or something. (the modem is right next to the computer if preferred we'd leave it plugged)  Maybe there is a way to print using the modem connection? Thanks in advance

  Hi Michelle150573,

  You can share the printer from the laptop, but the most reliable way to install it on the desktop would infest a USB wireless adapter and then install it wireless to his computer. Wireless USB adapters run from $ 10 to $ 30 on newegg.com

• Unable to connect wireless the deskjet 3050

  Hi, try to connect my deskjet 3050 wireless to my netbook. installing the drivers, infact, the printer connects to my network, it is not simply to receive an IP address. can any1 tell me why? is it possible for me to assign an IP address manually, if so how? I have an another leptop connected, 2 phones & ipod to my router, mac address filtering is not lit. and I entered the wireless key manually 3 times, just to be sure!

  any help would be great!

  solution > zonealarm > Firewall tab > tab areas > add > subnet > ip address 192.168.1.0 255.255.255.0 > > give subnet point a description (anything) > ok > apply

  resolved. Happy days

• DeskJet 3050 & iphone 4S

  What app I have to print to deskjet 3050 j610 with iphone 4S...  The MS Printer Control App could not find the printer

  Hello Tarun01

  If you mean the HP Deskjet 3050 a J611 then yes it is compatible airprint and ePrint. In order to use airprint and ePrint, it may be necessary to download the last update of the product. To do this you must first make sure that the printer is set up and connected to your wireless network. It is possible the computer and not the front screen of the printer. Once the printer on the network, press the ePrint button located on the front and follow the prompts to activate the web services and the update of product should download automatically if it is available. This will also allow ePrint and print a sheet of mobile check-in with a code, you can use to save your printer online at http://www.eprintcenter.com.

• Impossible to check the level of ink HP Deskjet 3050 J610

  I'm unable to check the ink level. When I go to:

  Control Panel\Hardware and Sound\Devices and Printers\HP Deskjet 3050 J610 series

  I get only 'see what's printing","Set preferences"and"customize your printer.

  

  How can I solve this problem?

  When I bought it. I installed all the software from the CD and that's all, but for some reason any here is no more.

  Operating system is Win7 64 bit

  When I run CD > add more software "already installed" read here at the end.

  I uninstalled HP Deskjet 3050 J610 series and then I reinstalled the CD software.

  When I uninstalled it, I got error:

  Warning of 1910. Could not remove shortcut HP Deskjet 3050 J610 series Scan.Ink. Verify that the shortcut file exists and that you can access.

  And after that I reinstalled the software and now it works.

  I'm crazy enough to forget that I had the CD and I could do it.

  Thanks for help.