HP deskjet f4135: f4135

Similar Questions

• HP Deskjet F4135 colors print does not correctly

  When I go to print a word document, my colors do not print the correct colors.  that is purple print Green - Green print blue, etc.

  How can I fix this problem?  If I print a coupon from a web page, all the colors are correct.  If I print pictures, they too are the wrong color.

  I reinstalled my printer disk and I also have a new cartridge color printed and aligned my color correctly test page.   Help!

  Try to print a self-test page by pressing the arrow and the color copy button at the same time. You see all the colors here?

• printer ink

  I have an hp deskjet f4135 all-in-one

  I filled my ink cartridges several this last time that I filled them they worked fine and then never used the printer for a few weeks now, my black won't work, deleted it wiped clean but not go. all ideas

  If the unit is missing color of impressions, then it is possible that some ink got clogged in one printer ports is not used, as indicated above.  Follow the steps outlined in the document, found here, to troubleshoot missing, faded, or dark colors.

  Also, take a look at the thread found here.  I hope this helps.

• Re: New ink, message says empty

  I have the same problem with my DeskJet F4135. I have used and loved this printer for 2 years now. I changed the cartridges before printing without problem. Now, the job queue says the cartridge is empty, but there is a new party 3rd one in. Color and black lights blink and there is a constant E showing. I use Media Win98. The printer is connected properly. I can not scan to try to align the printhead... pressing the button does nothing and the lights are still flashing. I turned the printer power off and power on. Reconnect the cords. Re-sitting the cartridges.

  My software never worked properly so I can't go her and select Properties. I can not find anywhere on the HP site where I can download a new software with the exception of the diagnostic software that says the printer is fine. And that my drivers and software are up-to-date.

  Help? Thank you in advance.

  terrin6 wrote:

  I have the same problem with my DeskJet F4135. I have used and loved this printer for 2 years now. I changed the cartridges before printing without problem. Now, the job queue says the cartridge is empty, but there is a new party 3rd one in. Color and black lights blink and there is a constant E showing. I use Media Win98. The printer is connected properly. I can not scan to try to align the printhead... pressing the button does nothing and the lights are still flashing. I turned the printer power off and power on. Reconnect the cords. Re-sitting the cartridges.

  Third party cartridges are generally cartridges that have been used and then reused.  These will not display the correct ink levels.  In addition, the quality varies greatly and is generally poor, see the study of the logic of quality here.  For your question fresh HP cartridges should solve your problem.

• How much ink I have in my cartridges

  I bought a new pc with Windows 8. My old pc had Windows XP and my Deskjet 4100 Series operation window displays the amount of ink that had left me in my cartridges, I installed my Deskjet 4100 (4135) on my new pc and it works perfectly. The only problem is now, my window of Windows 8 operating for my printer does not give me an option to find out how much ink I have in my cartridges. What can I do to find out my status of ink with the window of Windows 8 operating? It's frustrating, because I ran out of black ink in the middle of a job. Thank you

  {Information}

  You have installed full features for Deskjet F4135 software on your computer? The application of the Solution Center contains an option to check levels of ink the printer Toolbox.

  Alternatively, you can try to check the ink levels using the Print and Scan doctor. Please see the document below:

  http://support.HP.com/us-en/document/c03286146

  The document has a link to download the utility. Please, download the utility to your desktop and run the utility.

  1. in the utility window, select your printer from the list and click Next.
  2. search for the "Menu of the printer" on the top left of the window. Click on it.
  3. you should be able to see the "ink levels". Click on it.

  Let me know if it helps.

• B & w threshold too low when scanning

  HP DeskJet F4135 printer range: when you scan pages in a pdf file, the b/w line is still too low. I need to reset for each page that takes a long time. Any way to adjust the threshold of b/w once for all pages?

  Hi jack321jack,

  If you have the model without the ADF you will most likely need the settings of copy of each document.

• HP F4135 does not print photos computer Vista program

  I have Vista (yay!) and the printer will print pictures more.  I need this feature to do a job.  Help, please.  I have cleaned the printer with compressed air, but it did not help.

  Hi sistrozzie,

  What combination of flashing light can be seen?  He's not picking the paper?  You use the borderless printing option?  Please see the information that describes the common sizes supported photo/card for this device (based on normal weight) below.  The following steps may resolve the problem quickly.  If you are still having problem a generic driver can help.  Here is a link that will provide measures for this.  Click here

  Application used: clarification:

  1. are you printing from Windows, Photoshop photo viewer, etc. ?

  Quick steps:

  1. check the card stock/photo support

  2. try to print in the draft mode - select this option under the quality, try to send the print job

  Stock photo/cards supported:

  Cards

  3 x 5 inches 4 x 6 inches 5 x 8 inches A6 (105 x 148.5 mm)

  Photo

  Borderless (4 x 6.5 inches w / detachable tab total measure of 4 x 6 inches) Borderless 10 x 15.2 cm w / detachable tab total measure of 10 x 15 cm 4 "x 6" w/tab (with border prints) 10 x 15 cm w/tab (with border prints) Borderless 4 x 8 inches w/tab (Photo card) Borderless 10 x 20 cm w/tab (Photo card) 4 x 8 inches w/tab (of card Photo prints with border) 10 x 20 cm w/tab (of card Photo prints with border) Panorama borderless 4 x 10, 4 x 12 inches Panorama borderless 10 x 25 cm, 10 x 30 cm 5 x 7 inches 13 x 18 cm 8 x 10 inch

  Note: Let me know the flashing light combination, additional steps may need to be taken based on the error state

  I hope this helps!

• F4135 print on screen, but will not print a copy of the glass

  I can not print a copy of a copy, but it can print from the screen image. How can I fix it? He started just after working well for a while.

  I'm glad that you were able to get your printer to start to make a copy once again, Muzzik.  If this proposal does not work, first check all your ink levels.  Black test consists of all colors that come together to make black.  It is a process that occurs when you print from your PC.  The letter 'e' indicates error with your photo in black and.  It could also mean your ink cartridge door is open according to the document below, but then it would print at all if that was the case.

  -Flashing lights-

  Let me know if you have problems with your ink cartridge.  I hope this helps!

• My F4135 printer cannot scan and print from a copy

  With the help of windows xp I can't copy a scan and print

  Hi Muzzik,

  You can only print from Web sites?  Have you tried to print just a black paper as that of Notepad?

  I think that the best way to start is with the basics on this one.  Here is a link to a document from HP to make a copy on this model.  If these steps do not work, then we can continue.

  http://support.HP.com/us-en/document/c00853058

• hp deskjet 990cse printer driver

  I have an old HP Deskjet 990cse printer which needs a new driver.  I've recently updated for MacOS Sierra, and now the printer does not work.  I can't find an updated driver on the HP site.  Disappointment because the printer still works fine.

  Someone at - it a similar problem?

  Thank you.

  I managed to make it work.  I went into system preferences and deleted and then added the printer.  He now uses a generic driver.

• Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

  There is a problem with the 64-bit, Vista, Windows 7 and Windows 8 or 8.1 drivers which causes the spooler crash with the following HP Deskjet printers:

  DeskJet 710

  DeskJet 712

  DeskJet 720

  DeskJet 722

  DeskJet 810

  DeskJet 812

  Deskjet 820

  DeskJet 822

  DeskJet 1000

  The attachment contains a fix for this problem for Vista and Windows 7.

  [The patch does not work for Windows 8, 8.1, or 10 x 64 systems.  There are efforts to this address, if a solution is developed it will be shown here.  [{Edit - I did not progress by getting the patch to run in Windows 8 x 64.}]

  First of all make sure that the driver for the installed printer.  If the driver has not been installed go to start devices and printers, add printer, the local printer, choose the appropriate port (for the converters, USB-parallel, the port likely USB001: or maybe USB002 :), then click Windows Update then choose HP for the manufacturer and select the appropriate printer.)

  Apply the patch as follows: log in to the computer with an administrator account.  Download the patch by clicking on this link or on the trombone at the end of this post.  Save the hotfix on your computer, then unzip it.  Then, copy the three DLL files in the following directory: %windir%\system32\spool\drivers\x64\3

  Note that %windir%\System32 is a system variable that points to the location of the Windows directory. For most systems it will be C:\Windows.  You can click Start, computer, and type %windir%\system32\spool\drivers\x64\3 in the address bar and it is in the right place.

  This can be done from a DOS command prompt if BACK is opened with the "run as Administrator" command or to explore with a copy and paste.  Depending on your UAC settings, you may need to provide confirmation.  Also allow existing files to be replaced if you are prompted.

  This patch is not necessary and should not be applied to a 32-bit version of Vista or Windows 7.

  Thanks to extraordinary Microsoft engineer Alan Morris forguidelines for patch.

  Update - here is that of the more detailed installation instructions:

  Download the patch on the DJ_Patch.zip at the bottom of the page and save it on your computer.  Now click on the file and open it, and then extract the fix in a directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative BACK prompts by clicking Start, all programs, accessories, and then right-click on CMD. EXE and select run as administrator. Click in the DOS window, and then type the following command:

  MD c:\temp

  CD \temp

  Now extract the patch files in the c:\temp directory (all, extract c:\temp chose as a destination).

  [Update - Windows security settings can prevent these files from being used, please open computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties.]  If there is a message indicating the properties file has been downloaded from the internet and can be blocked and then unlock the file before continuing.]

  Then, click back to the administrative DOS prompt and type the following: (the green stuff are comments, do not type them...)

  *. DLL DIR (just to check that the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others).

  Net stop spooler (ensures that the files are not in use.)

  Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)

  Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)

  Hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000 copy)

  NET Start Spooler

  Output

  [Edit - note that these DLL files will already be in the directory.  You will get a warning asking if it's OK to replace the files, say "Yes".]

  At this point, the patch is installed and ready to print.

  Note that here printers do not support USB connections, they have only the parallel ports. [Edit - if your printer has a parallel port to use, it will be probably much less problematic than the use of a converter USB / parallel].   If you use a make you converter USB / parallel it is supported in your operating system.  The following messages are reported by cables USB-parallel that are supposed to work in Windows 7.   A driver is required for the converter USB / parallel besides the driver of the printer.  For converters supported, it is usually provided automatically in Windows 7.  Note: the appropriate to select for USB-parallel converter port is often USB001:.  I've heard of cases where the port was USB002: or LPT3: as well.  If the port you are using is unable (after applying the fix) try to change the port by going to start, devices and printers, right-click on your printer and select printer properties, then click the Ports tab.

  Mick4 wrote: the problem is that I only could unzip the 3 dll files but don't know how to replace the bad dll files. Mick 4

  If you use Windows 7 do the following: log in as a user with the administrater properties.  [The following assumes that you are using IE as your browser] Click on the here link and select "Save".   Once the download is complete, select "Open folder", then right-click on the DJ_patch.zip file and select extract all.   If extract all is not an option, then click on "Open with" and select Windows Explorer.

  

  Leave the default directory and check the box "Show extracted files when you are finished", excerpt.   Click Start, computer, and type % windir%\system32\spool\drivers\x64\3.  Arrange the windows so that you can access the two parts of the window.  Go in the first pane and select the three files dll, hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll.  Now drag and drop them to the % windir%\system32\spool\drivers\x64\3 window, select copy and answer to 'replace' in the dialog box.

  Note: %windir%\System32 is a system variable that points to the Windows directory.  For most systems it will be C:\Windows, but it can vary depending on the configuration of NDO of hardware configuration of the computer.  If you type %windir%\SysWoW64\cmd.exe in the address bar in Explorer or in start, search programs and files, it will find the right directory.

• HP deskjet 3540 series (D142AF: print validation error)

  I am trying to print from my computer hp laptop on my wireless printer and I got valedating of the printer... Please can you help me now?

  Welcome to the HP Forums!
  I hope you're well @denden2-_bé

  I read about the error you see when you try to print from your system from Windows 7 to your Deskjet 3540, and I hope to help.

  Please try using Print and doctor Scan for Windows to help troubleshoot printer problems

  If the tool does not help, try to print from other programs, uninstall and reinstall the printer.

  If the problem persists, let me know the details.

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Have a nice day

• HP Deskjet 2640 Jet advantage: printing without margins

  I would like to know if it is possible to print borderless with the advantage of Jet HP printer jet 2640 engineering.
  If possible, I would like to know how to set up the printer for such an impression.
  Thanks for the help

  Hello

  Your ptintrt doed does not support borderless printing. Full stop. The best you can get for border is round 3.2 mm for L & r 1.5 mm for Top and 14.5 mm for the bottom.

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-2640-all-in-one-printer-series/5357278/document/c03802179/

  Kind regards.

• HP Deskjet 3512 e-all-in-one Deskjet of HP P: 3512 e-all-in-one printer does not "standby mode"

  Printer will not wake from sleep mode.

  It has a static IP address. Works very well once he wakes up to the top. Doctor of Scan cannot even find it when he's asleep. 2 computers on home network have the same problems. Is there a way to disable the mode 'sleep'?

  Hi @tedd1,

  Welcome to the HP Forums!

  I understand that your HP Deskjet 3512 does not wake from sleep mode. I'm happy to help with this problem!

  Please make sure that the auto power off feature is not turned on. As when it is off, you manually turn on the printer after 2 hours.

  Automatic stop function

• DeskJet F2180 + Vista 64-bit

  Hello

  I am currently in the situation that I need to print something, in the case of witch, I decided to use a HP Deskjet F2180 I had laying around. I use Windows Vista Ultimate 64-bit so I thought I was good off to download this file. Appearently that was not the case. It fails during step 3 of 4 of the installation process.

  The error States:

  SourceFile was not "C:\users\***\AppData\Local\Temp\7zSA5E7.tmp\setup\Toolbox\Toolbox1030.cab".

  And then it pops up with another error, a word on ""C:\users\***\AppData\Local\Temp\7zSA5E7.tmp\setup\hpzmsi01.exe " "

  Then it analyzes the log, and this is what is said:

  Error code: 193060200

  Now Launching = x: \hpzmsi01.exe - aioproduct_min l - XXX the list f
  X:\DIVins?. DAT
  Error message received: Sourcefile not found: X:\Toolbox1030.cab
  Make sure that the file exists and that you have access to it. -I am sure that I run the installer as administrator and I have access

  X:\Toolbox.msi failed with return code 1603
  MSIInstall() failed with 1603 for MSI Toolbox
  Exit code = 1603

  I hope that's enough for you give me a way to fix this detailed

  Sincere greetings

  its

  Message edited by its on 2008-11-23 14:46

  Try to download the software from this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-64285-1 & LC = on & DLC = in & CC = US & Product = 3177562 & os = 2100 & lang = in

  Save your desktop and run it from there...

  Keep us abreast of the concerns