HP Desktop: OS question

Similar Questions

• Desktop icon question - great, WLAN icon on the desktop

  original title: the desktop icon question

  Last night my laptop automatically downloaded updates for Microsoft Windows 7. This morning he said updates installed and starts normally. However, I now have an 'icon' large, transparent, non-interactive in the form a tower with the title "WLAN" stuck to a place on the left side of my desk. I didn't notice at first but after my internet started, realized quickly that it was there. This "icon" does not disappear any application, I opened. After searching the Web for what it might be, I scanned my computer with an analysis of the software and programs malware/dracovenii (suggestion) I am free with happiness at the same time my antivirus favorite. I checked to see if it was a widget/gadget and it isn't. I continued to control internet, microsoft.com, and asus technical forums to see no answers to my dilemma. If anyone has an idea of what it is and whether it can be removed, I would be grateful for the help.

  After some research, I went to my control panel > programs > seen the installed updates and check my recent updates, since I am very sure that they were the cause of my problem.

  After looking for Microsoft. com with codes of 3 security update that has been installed recently, I came to the conclusion that the update of KB2552343 was the update that has the problem of the "ghost WLAN icon.

  So I uninstalled this update, and I turned off my automatic installation of the feature updates in my windows update program. I now put to download updates and install them manually.

  I hope that everything that has the problem in the first place is fixed with a future update, because I prefer to have all updates automatically downloaded and installed security. More information on my computer that is its a K61 series laptop Asus K61IC.

  Thanks again for all your time and I am very happy that I could solve this problem myself and others provide assistance to its subject.

• Sync BlackBerry Desktop Software questions

  Very frustrating... for about 3 or 4 weeks now, but I can't sync my blackberry with outlook 2007 curve.  Whenever I try it gives me an error of windows that it has encountered a problem and needs to close. The software seems to work fine until I connect my blackberry and click 'sync' then he always has a short time and then gives me the Windows error "encountered problem and needs close." Below I will paste the information on the error message.  I uninstalled the Software Desktop and reinstalled twice... I restored the system to an earlier time... nothing seems to work.  I called my ISP tech support, and they say that it is a windows error and that they can not help... Can you?
  EventType: BEX P1: DesktopMgr.exe P2: 4.7.0.37 P3: 49c1b7ab
  P4: Synchronize.dll P5: 4.7.0.37 P6: 49c1ba5e P7: 0004f0f7
  P8: c0000409 P9: 00000000

  Thank you! Very frustrating... for about 3 or 4 weeks now, but I can't sync my blackberry with outlook 2007 curve. Whenever I do it gives me an error of windows that it has encountered a problem and needs to close. Below I will paste the information on the error message. I uninstalled the Software Desktop and reinstalled twice... I restored the system to an earlier time... nothing seems to work. I called my ISP tech support, and they say that it is a windows error and that they can not help... Can you? EventType: BEX P1: DesktopMgr.exe P2: 4.7.0.37 P3: 49c1b7ab P4: Synchronize.dll P5: 4.7.0.37 P6: 49c1ba5e P7: 0004f0f7 P8: c0000409 P9: 00000000 thanks!

  Hello JessicaAnn,

  Thank you for posting.  It looks like you might a bad installation of the software components of the DesktopManager.  You can correct this to install the latest version of Java, and you can also see a newer version of the Desktop Manager software.  Since the Desktop Manager software uses Java, I suggest you get the latest version of Java that is compatible with your version of Vista.

  Please let me know if this helps you. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• The desktop icon question

  Good afternoon

  Somehow, I don't know how, but all desktop icons have been modified in Adobe PDF format, when I click on it I get the following message: cold Adobe Reader not open 'iexplore.exe' because it is not a supported file type or because the file has been damaged (for example, if sent as an attachment to e-mail and has not been correctly decoded).

  Either way is correct without reloading Windows 7?

  Any help would be appreciated,

  rcbinnorva

  E-mail address is removed from the privacy *.

  Hello

  This should help you.

  'Restore. Association of exe in Windows 7/Vista after incorrectly associating it with another program"

  http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/

  "When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program.

  Run the Mr.Fixit here or you can use the manual method it y to correct yourself

  http://support.Microsoft.com/kb/950505/en-us

  And also, read information please.

  'Change the programs that Windows uses by default'

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  See you soon.

• BlackBerry Smartphones BlackBerry Desktop Manager question

  I just got a BB Storm today.  Installed the BB desktop on my computer Manager.  However, when I click on mamanger desktop icon to start, I get the message: "the component you are trying to use is on a network unavailable resource.  Click OK to try again or enter a different path to the folder containing the installation package "BlackBerry 8130.msi" in the box below. "I don't know what to do next.  Help!

  Have you tried ALL the steps clean uninstall? If this is not the case, try ALL of them and then restart to see if you can install the new version of the Desktop Manager.

  If so and it is still not work try to install the Windows Installer Cleanup utility to remove the Desktop Manager and try again - http://support.microsoft.com/kb/290301

• BlackBerry Smartphones Help retrieve me and store my photos and videos (black screen + desktop Mngr questions)

  Hello

  So, I have the blackberry storm 9500 for awhile now...

  This morning the screen was black, but the keys and below the screen are light, the alarm went off, even managed to make a call...

  tried to connect the phone to the computer to save the images and videos, and he says

  "media services are not available."

  You must activate the connected blackberry device mass storage mode to use this feature.

  It may ask you to reconect your device. »

  PS: I already took the batery out for awhile, when I turn it on again, back to the black screen

  and I've never had a problem with opening the pic and vid on the pc before

  the main problem for me is, is any way I can save my photo and videos? I don't have an external memory card

  If it will be fixed, probably that I'm going to lose it all, right?

  Please help me thanks

  I am happy to say that I found a solution!

  i ' v has downloaded the Desktop Manager software provided with my cell phone, to a half old broken laptop computer runing Windows XP, and this is

  the images recovered, videos and even the music!

  Sorry form my English, thank you for your help

  and bye

• HP PAVILION 550-126: start PC Desktop Monitor question

  Installed a HP Pavillion PC with Windows 10 550-126.  I plugged my old model monitor (2009) PC Pavillion, which is a HP 2009 m.  HP 2009 m monitor had a DVI connection, so I bought a DVI adapter to HDMI to connect the new 550-126 Pavilion.  At the start of the monitor shows nothing.  It takes a long time (5-10 minutes) before the login page appears.  When starting I have pressed the "Source" button on the HP 2009 m monitor and it comes up with a block that says "Check Vidoe cable", the block is delivered on one that says DVI is scanning, then digital asset.  I'm trying to understand if the problem is I use an adapter DVI to HDMI or if there is something else that happens - or I need to get a screen that has a direct HDMI to HDMI connection.

  Thanks for the help.

  It's the adapter.

  If you want the video to appear quickly, you'll need a display more modern.

  Yours is a type of old-school LCD vice a LED modern type.

  Fortunately, most modern screens usually have a HDMI input.

• Works very well in the Simulator, but when it is installed through the Desktop Manager questions

  OK so as well Hello world and production apps work correctly on the Simulator... I had some advanced api like blackberry.identity but I removed it because he yelled at me for code signing... I removed the advanced permissions but usually always open... I can see the application in the list of downloads, but clicking nothing

  I tried with the sample application engines and the same thing... click on the application icon, but nothing happens...

  Once again any word on sim and no not use any "features" except the blackberry.ui (on production app)

  blackberry 9630 tour

  Thanks for your help!

  All the BlackBerry Widgets require the signature, even if you are not using a single line of JavaScript.

  The software BlackBerry Widget SDK generates the Java code required to create the widget.  The display of web content in a Java BrowserField, which requires a signature.  Therefore, all the widgets must be signed.

  Code signing keys are usually issued within 2 days of the order, but may take up to 10 business days.

• BlackBerry Smartphones Re: Blackberry Desktop Software questions v4.5 & v4.6 (v4.3 OK)

  Please tell m if it is an incorrect use of the forum and in particular, your time, but you have been so helpful in the past.  I am trying to drag and drop a video podcast on itunes to my Blackberry storm media card (all of in Windows Explorer) and not having not success.  My Storm is connected via USB.  I run the DM in the background (version 4.7.0.25) in the case where it makes a difference.    I click on the podcast, but when I try to hang out on top of the media card, it will not highlight the media card and so I'd drop it.  You would be so good in respect to explicitly describe how to do this?  I have Windows XP.  Thank you very much.   Leigh Ann

  Hello!

  You have the mass storage mode (under Options > memory)? With that, XP will give you two drive letters for the storm... one for the memory of the device and the other to the SD card. Then, you can use Windows File Explorer (open source and the first destination) for drag and drop things from the storm.

• When I refresh my desktop or restart my computer, all the icons on my desktop are moving to the left.

  The desktop icon question

  When I refresh my desktop or restart my computer, all the icons on my desktop are moving to the left.  I drag them back where I want to, and the next time that I reboot, they are to the left.  Running MS XP on this computer.

  How can I fix them in place?

  Hello
   
  I suggest you to change the Auto settings fix the registry.
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
   
  322756 how to back up and restore the registry in Windows
   
  a. click on Start and then run.
   
  b. type regedit and press to enter.
   
  c. navigate to the following key.
   
  HKEY_USERS\. DEFAULT\Software\Microsoft\Windows NT\CurrentVersion\Program Manager\Settings
   
  d. change the REG_DWORD value 0.

• Smartphones from blackBerry Desktop Manager does not recognize my Sprint Bold 9650

  I put these questions I have on You Tube.

  http://www.YouTube.com/watch?v=lcSwbk7sxFE

  or you can search youtube for.

  Sprint Blackberry Bold 9650 Desktop Manager questions

  The software does not recognize my phone at all - ever - new install on 13/07/2001

  It's my first installation of the Software Desktop manager (no previous version where installed)

  I changed the power setting on my laptop USB ports

  Phone is version 6.0 bundle 2647

  Version of Desktop Manager is 6.1.0.35

  Thanks for your help-

  KB00125 - had the answer - I didn't know this - the data cable was thicker - the two cables where from Blackberry
  The answer
  Some USB cables are provided for only working load. These cables have no pins for data transfer.

  Implement a USB cable with pins for the transfer of data.

• After going into sleep mode after automatic update of Windows 7, Pavilion p6210y PC won't sleep

  In two weeks, after an update of HP launched automatically, my monitor is not recognized - I tried to restart my PC via the power button, but the action brought everything back without interruption to the place.  Finally I made the necessary update HP closed down and all was back to normal.  Last night I made a full stop and a Windows 7 launched updates (do not turn off your computer, etc..).  This morning when I powered back upward, I got messages on the windows during Setup, etc, then everything returned normally.  I worked for a few hours and left the machine - it entered into mode 'sleep' and now I can't get out of fashion "Eve".  If I power cycle the monitor, I can messages same "cannot detect.  If I try to shut down the PC via the power button, the light is orange/sleep, I hear a humming, then seeing if off, then back to orange/snoring, reverse, etc..  Keeps the bike like this.  I'm afraid that question a couple of weeks may have been a sign of early warning of a problem of h/w, but am not sure.  Can anyone help?  I am not very savvy h/w... and hope that it is something more simple than that.  The PC is 2.5 years.

  Your need to deactivate "standby" as soon as POSSIBLE to determine what is happening. You have 2 numbers because your motherboard is the infamous M2N78 - LA.

  That hum maybe the CPU fan:http://h30434.www3.hp.com/t5/Other-Desktop-PC-questions/To-all-with-M2N78-LA-CPU-fan-constantly-changing-speed/td-p/704265

  The other issue is more complex. Overheating the Nvidia chip. This chip share logic and circuits with the SATA hard drive controller and the graphics port. http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716

  Your need to read each section and each answer. I suggest you save and move forward with all the measures that you feel is of advantage.

• HP Pavilion HPE h9 - 1120-t Phoenix - PC suddenly starts turning Off after a few Minutes of use

  Posted this on the Forum for questions of another office before I reduced the problem.  No one answered:

  http://h30434.www3.HP.com/T5/other-desktop-PC-questions/HP-Pavilion-HPE-H9-1120t-Phoenix-PC-suddenly...

  Announcing this computer from July 2012 and not even a hiccup.  4 days, the computer suddenly began turn power off. It doesn't stop, it turns off, the plug was pulled. When I reboot I get the message of abnormal termination of Windows.   There is no warning at all.  No message as the computer is overheating.  He comes to occur when the computer is idle without programs will open.

  When it stops, the power supply unit light goes out for a minute then comes back on the 'green' and the computer can be restarted.

  I unplugged the power cord and relugged and it seems fine.

  The computer is aware of the updates of Windows and can be stopped normally.

  I removed the cover and clean the dust and confirmed all fans are running properly.  I left the lid off the coast, and the computer stops again.

  I must add that when the computer is started 'cold' it runs about 15 minutes.  If you restart after it just closed, you have maybe 3-5 minutes of use.

  Why did you think it was overheating.

  Any ideas?  Thank you.

  Specifications of the computer:

  What thermal paste on the processor?

  There are two programs, you could download to monitor the temperature of the CPU

  Speccy free:

  http://www.Piriform.com/Speccy

  or Core Temp

  http://www.alcpu.com/CoreTemp/

  Another possibility is a PSU fault

  http://ryansccs.HubPages.com/hub/how-to-tell-when-computer-power-supply-is-failing

• Upgrade my CPU AMD Phenom II x 4 910 to a Phenom II x 4 980 on a H-RS880-Μatx (Aloe)

  I have a HP Pavillion e9220y which I would like to make a few CPU and GPU upgrade.

  I did some research and saw that the current processor (AMD Phenom II x 4 910 (2.6 ghz)) can be upgraded to the AMD Phenom II x 4 980 (3.7 ghz) cpu.  I also intend on the old graphics card (Radeon HD 4350) in switching to a Radeon 7850.

  I tried to see if I needed to update my bios before install the new processor and I couldn't find a suggestion in the section Support & drivers specific to the HP Web site for my model computer.  The HP site says that he would suggest somehow if an update was available.

  Do you think I can just proceed with the switch of CPU (and the radiator and the stages of thermal paste of course) without flashing new bios?

  The old Bios simply would work with the new processor (faster processing speed)?

  The current Bios on my system is ' American Megatrends, Inc. 5.04, 10/01/2009 "and SMBIOS version 2.6

  Thanks for all the help you can give me,

  Jeff

  Hello

  I can't see any upgrade. As mentioned in the specifications, he takes care of the day 1. In addition, the following link is FYI:

  http://h30434.www3.HP.com/T5/other-desktop-PC-questions/BIOS-update/TD-p/1087865

  Kind regards.

• G42 - 415 DX limit access to internet

  I had a problem with my internet laptop for the last few days. It works for an hour and then suddenly stops. I would get a notification saying no access to the network. The internet on other devices at home works fine. So far, I unplugged and notched rep of the modem. I've searched everywhere online and I have not found any solution. I have a laptop HP G 42. Please I am in a lot of the need of this laptop, I'm very close to start a new school year and will need to use it.

  Hello again Denise16,

  Thank you for providing your information!

  In order to expand access to the Internet from your laptop, I advise you to follow this document on troubleshooting your wireless network and Internet access (Windows 7). This should help to re-establish the connection between your laptop and the wireless network.

  If your laptop is always trouble connecting, I recommend following the steps below to clear the DNS:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"
  Step 3. Right click on command prompt

  Step 4. Click on run as administrator
  Step 5. At the command prompt, type "ipconfig/flushdns".

  At this successful? If this isn't the case, I would like you to reset the TCP/IP stack. To do this follow the next series of steps that I have set out below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"
  Step 3. Right click on command prompt

  Step 4. Click on run as administrator
  Step 5. Type "netsh winsock reset catalog" and press ENTER.
  Step 6. Type 'netsh int ip reset reset.log' and press ENTER.
  Step 7. Restart your computer

  Then, I would like that try you the next series of steps, I have outlined for you below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Windows Explorer"

  Step 3. Click on Windows Explorer

  Step 4. In the address at the top of the page bar try to distribute a video or download Google Chrome

  reference: http://h30434.www3.HP.com/T5/other-desktop-PC-questions/Ethernet-not-working-on-slimline-desktop/m-p/3985804/highlight/true#M47729 

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning