HP e9120y to USB 3.0 update

Similar Questions

• USB-9171 installs as USB Flash Firmware Updater

  I just got a USB-9171 with 9401 module.  Try to install it on a laptop Dell Vostro 64 bit WIndows 7. LabVIEW 8.5.1, which works very well with a USB-6212 for awhile is already installed.  I installed the 9.6 NOR-DAQmx that came with the new 9171 and the time of execution of Labview 2012 such as recommended by the Update Manager.  The connection of the USB-6212 he loaded the driver, he recognized in MAX and will work as before.  But plug it in the USB-9171, identifies the driver loaded by Windows as USB Flash Firmware Updater.  The 9171 does not appear in MAX.

  How can I get the USB-9171 driver appropriate to load?

  Thanks - Steve

  Found a solution by calling the service tech.

  Unplug the USB device.

  With the help of MAX, go to tools > reset Configuration data.  This will erase the MAX configuration and restart.

  MAX aperture.  Open the Windows Device Manager.

  Plug the device.

  In the beginning, I received the ball from Windows saying that it successfully installed USB Flash Firmware Updater.  But then on hold while the window updated Device Manager (it flashed several times), he said the right device (cDAQ-9171) as well as the module I connected on the cDAQ-9171, which is a 9401.

  The tech service rep explained that there is a service called Windows device charger OR who must load the appropriate driver, but sometimes the service may stop too soon.

  In any case, I tried all the things here before, but what was different this time was seen both MAX and the windows Device Manager open at the same time before connecting the unit (after wiping of the configuration).

• Card SD & USB issues after update of El Capitan

  Hi all!

  Just updated to Yosemite's El Capitan.  Running iMac (21.5 inch late 2009) - to update of Yosemite point has been completely up to date as well as all software and drivers.  Now problems after the iMac to wake up in the morning with some of the built-in ports.

  1. SD card reader - have to restart so that this works, but only works for an hour or two, it is more readings.

  2 ports USB - external HD holding that nothing else than music files must be disconnected and then reconnected to be recognized and to mount.  Anomaly is that Time Machine on back of the iMac USB continues to function properly and rises when waking from sleep in the morning.

  3-4 ports USB hub plugged back has only 2 operational ports in the morning, must either be disconnected and then reconnected to have all four ports work.  It works sometimes for the rest of the day or only works for one hour UX as well.

  4 keyboard (yes I prefer a cable on BT) takes a minute or two to be recognized after the awakening of fashion 'sleep' in the morning.

  I tried to reboot my machine?  Yes, several times.

  I tried to reset the SMC?  Yes, several times.

  I tried to reset the NVRAM/PRAM memory?  Yes, several times.

  Any suggestions on additional solutions without getting really heavy in the Terminal?  Not really keen to try some of the recommendations Terminal found here on communities, as I do not play with the programming of the OS.

  Thank you!

  Thanks for the nine people who have seen this post.  Unfortunately no one answered, so I 'solved it' of it the only way I knew how.  Rolled back to Yosemite.  I hope that the new Sierra OS will be an improvement on El Capitan.

• Multiport USB - C map update install Fail

  I just brought a new MacBook 2016 with a multipart USB - C adapter.  I try to install the update of Multiport USB - C adapter.  After you run the installation program by pressing the "restart" button on the Panel of final Installer menu at the top of the Office bar disappears and the computer does not restart.  I am able to select and run programs of the docking station, but never restarts the computer and the menu bar never returns.

  I have read and followed the instructions online for the installation program.  Any suggestions would be greatly appreciated.

  Thank you!

  The guarantee gives the right to the free phone support for the first 90 days of ownership.

• Multiport USB - C map update will not install

  I thought that I had the answer to this, but...

  I installed the update of the USB - C software shortly after its release. He reported "Successful Installation", but whenever I started the rMB there was a notification to install the update. A version check ( on a Multiport adapter update 1.0 - Apple Support USB-C ) revealed it had not updated.

  I finally read the instructions on the screen to start during installation and travels account that the adapter needed to be plugged in and connected to a power source. I did this and tried to new installation but still have the splash screen. I tried installing a second time and it finally worked.

  Hi there Michael Paine,

  It seems that the USB - C Update appears to install but you still have guests to update, and it has not actually installed. I'd start by starting in safe mode.  This erases some system-level caches and perform a disk check and repair if necessary.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  From: try safe mode if your Mac does not start-up

  Then leave the mode safe mode with a normal restart and check if the driver is still installed, or if you can install it again correctly. If not, you should try to reset the PRAM and new test:

  How to reset the NVRAM on your Mac.

  If it still is not resolved then I would then reset your SMC and give it another go:

  Reset the management system (SCM) controller on your Mac.

  Thank you for using communities of Apple Support, all the best!

• Satellite A660 - boot problems USB after BIOS update

  Hello

  I own a Toshiba Satellite A660 and have recently updated the BIOS with the latest version (1.80). Since then, the laptop freezes on the splash screen (the one with the Toshiba logo) whenever a USB flash memory is attached.
  It works without the memory flash connected and if I connect it after I enter the starting or the BIOS Setup menu. I can even start her like that.
  As far as I'm concerned, this is a serious regression. Is there a way I can downgrade to the version of the BIOS, or any other way to solve this problem? I rely heavily on external USB drives.

  Kind regards
  Claudiu.

  Claudiu salvation,

  That is really interesting, I have to say so I tested on my new Satellite A660 and Transcend 4 GB USB Stick. Well, I also installed 1.80 BIOS but I can t view this problem HARD drive is set as first boot device and all the other BIOS settings are default. The Toshiba screen and Windows computer starts as usual.
  No problem at all!

  Have you tested different USB devices?

  In General, it is not possible to downgrade BIOS. It is possible to an authorized service because Toshiba on page you can download the latest version only but I doubt it s a bug in the new version of BIOS because it works on my A660.

• [Helix] HUB USB 3.0 Update tool

  I just tried to install the Firmware update USB Hub Version 2.03 for my Helix with 64-bit Windows 8. Nothing helps.

  This is the error message I got somewhere between steps 19 and 20:

  "Selective suspend deactivation failed".

  Someone at - it an idea as to which shot poorly (or what I could have done wrong)?

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS041965

  PS:

  (1) I have installed remove USB.

  (2) and I use Toshiba Dynadock USB3.0 with the latest DisplayLink software edition.

  (3) the bios version is 1.23.

  Comment to Moderator: The topic is edited to include the model for visibility.

  
  

• Satellite A100 PSAA8E: Cannot boot from USB after Bios Update

  Hello

  I downloaded the latest bios (v6) for my satellite a100 (psaa8e) and after the update of the old bios, I noticed that I can not boot from USB. Is there a way to restore the old bios or will this problem solved?

  See you soon
  MB

  And before you can update the BIOS you were able to start the bootable CD from the external optical drive USB drive facilities?

  To be honest I really don't believe it. Try to connect USB FDD and you will see that the FDD is recognized and you will be able to use it as first boot device.

• Epson printer, conversion of 25 pins printer to USB configuration, then update

  Have an old epson 1520 printer that worked great in XP pro sp3, had a 25 pin attached to the motherboard connector. Computer died.

  Now have a computer of a1430n of hp with Vista sp2, software loaded Epson 1520, including updates.

  Had to change the connector cable 25-pin to 25-pin too USB cable. (cable attaches h/f for conversion too USB.)

  Printer is turned on, but no answer, my question is does go to the back or windows has more information.

  Please help if you can

  Cable gender changers can be problomatic, some work better than others.

  Assuming that you have a desktop computer and your old Epsom made Vista drivers available, your best bet may be a PCI card with the corrrect series / parallel port to connect directly to your Epsom

• Sommergibili Esxi 5 knew e USB/SD card update manager

  Hello to all,

  domanda stupida e/o banal my mi è UN dubbio sorto magari.

  SE ho una sommergibili Esxi fatta su USB o SD card 4 GB making gli update saturare the partition di rischio e do che esxi incominci a matto di dare?

  CI may avete pensato capitato e vi o?

  Grazie

  ALE

  No pole ESXi e più, quasi UN firmware UN che, e if so comporta tale. Quando it aggiornamento e UN I vecchi "pezzi" di codice are sostituiti. May Hai fatto caso che gli update da download hanno Super paragonabili all' install original, appunto I just firmware? Luca.

• Unable to transfer files to/from the USB device after updating to 6.0.1

  I have therefore updated to Android 6.0.1 and wanted to transfer files to the PC to the phone's internal storage. If I selected files larger than 100 MB (it happende a few times, but I've downloaded bigger and bigger files file size was not fixed limit) forwarding is stopped by an error:

  

  Any idea what could be the cause? What should do?

  Earlier, I tried to transfer some of the things that I filmed yesterday and he transferd with no problems. More than 1 GB. No idea what happened past.

• Vostro 430 to USB 3.0 update

  I'm looking for advice on how to upgrade my desktop computer Vostro 430 to accommodate some USB 3.0 ports.  Any suggestion of material would be welcome as well as any special precautions to do this.  I have a graphics card in one of the slots in the rear and down 3 are empty.  The motherboard is a Dell 054 KM 3 A01.

  Thanks in advance for any guidance you can provide.

  lpjmelb

  You must install a PCIe x 1 either a USB 3.0 PCI card additional similar to these:

  http://www.Newegg.com/Product/ProductList.aspx?Submit=ene&DEPA=0&Order=BESTMATCH&Description=USB-3+Cards&N=-1&isNodeId=

  Note: An additional power connector is required to use a USB 3.0 card, sometimes that means buying a power splitter Y.

  Bev.

• Studio XPS 8100 to USB 3.0 update

  I did a lot of backups lately and I recently bought an external hard drive USB 3.0 2.5 ". This suggests to me that it might be a good idea to upgrade my PC to USB 3.0. However, I don't know if it's possible.

  My PC is already equipped with an XFX HD 5770, which occupies 2 PCIe slots and a wireless PCI card. So far as I understand this means that I only have a PCI slot on the left. Correct me if I'm wrong. If the IDP is not possible, there are perhaps other possibilities...

  Thanks in advance!

  Request denied.

  The Middle 2 slots are X 1.

  The WHITE slot is PCI 2.3, that would work for a USB 2.0 card but not the USB 3.0 card. IOGEAR 5-Port Hi-Speed USB 2.0 PCI Card GIC251U

  http://www.Amazon.com/IOGEAR-5-port-hi-speed-card-GIC251U/DP/B0000BZ2WA

  

• iPhone 7 will not play audio via the USB port on the car.

  When I plug my iPhone USB port 7 more in my car (15 Jeep Grand Cherokee), the artist/song/podcast information appears on the screen, but the sound plays through the speakers of the phone.  I have confirmed that my settings are all the same as they were on my 6s, who played without any problems via the USB connection.  Bluetooth streaming works fine - no problems at all.  Any ideas, or is this a problem similar to that people have with CarPlay?

  Welcome to Apple Support communities, kevo.mac!

  Congratulations on your new iPhone 7 more! I see that you connect with your Jeep Grand Cherokee using the USB port. Everything seems to work fine, except that the music plays through the phone instead. I'll be happy to help you to get this working.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  If you are using USB playback

  Restart your iOS device and your car.
  Connect your iOS device to another stereo USB port (if you have one).
  Try another USB cable.
  Update your iOS device.
  Install the updates to the firmware of your car radio.
  Test of audio playback from a different application. If you can not play audio from a specific third party application, contact the developer of the app for help.
  If you can not play audio from an app Apple, contact Apple technical support.

  Enjoy your weekend!

• Urgent: need help on problems on the iPhone after updating iOS 10 6s

  Hey there! It's my third post about the problems Ive been face on my devices after 10 updated iOS. Initially, after that I've updated, the music app was not running on my phone-all I could see was an empty screen and the APP crashed and I was redirected to the homepage in a few seconds. Tired to restart the phone, deleting and then adding the app back, nothing worked. Not at all. So I tried to restore my phone, save all content via icloud. Followed all the steps and after the restoration of the aircraft of other problems surfaced, BUT the music app still does not work.

  Now, not only the app does not work, I can no longer sync my iPhone with iTunes. Whenever I try, I get the following errors:

  (1) itunes cannot sync the iPhone connection has been reset

  (2) iTunes sync session could start.

  IF PLEASE NOTE, BEFOR RESTORE IPHONE I COULD ALWAYS SYNCHRONIZE WITH ITUNES EVEN AFTER IOS UPDATE 10 AND TRANSFER THE MUSIC ETC, BUT JUST COULDN'T NOT OPEN MUSIC APP TO PHONE-NOW I CAN'T DO EITHER!

  I have tried pretty much everything, restart both phone & iTunes, reset the network settings on my iphone, reset itunes sync history, by removing the lockdown folder, running iTunes as administrator on my PC, change my USB in corduroy, update iTunes, reinstall iTunes on PC-nothing seems to work AT ALL. And it's extremely frustrating. I can sync music/documents on my iPad after update of the device and the restaurant then (iPad also has major problems) and then play the music on it but just isn't my phone can be synchronized. It is a function important and if I can't synchronize my device is a sitting duck.

  The new update of iOS also gave my massive lag of phone. Screen freezes, apps for time-consuming, HDR photos take longer to be broken. It is just too heavy to wear.

  CCAN anyone help me please with my iTunes sync + music matters app... I really regret updating to the new iOS. Please help me.

  Thank you.

  PS apologies for this long post, I had to write everything I tried.

  If you are on Windows, uninstall iTunes, uninstall Apple Mobile Device Support. Once both are uninstalled, reinstall itunes, see if it syncs with itunes then.